Can't install software that came with new Canon A540 digital camera

The installation process gets as far as "preparing to install imagebrowser" then hangs up the whole computer until I force quit. When I force quit, I see the installer plus a "master installer" in red that says it is not responding. I really would like to install the imagebrowser and photostitch. I know I can download the photos into iphoto, but iphoto does not allow selective downloads, nor does it stitch the photos, as far as I can tell.
Also, how can I prepare a slide show and add voice narration?
I'm using 10.4.7

you need to install it via a superdrive. If you have the original one that came with the mac, you can purchase an external case to put it in and then plug it into the usb port. You can not download the software anywhere. Only do what I first suggested or repurchase it.

Similar Messages

Have photoshop cs5 installed on desktop..got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still now working. Need help, please.

I have photoshop cs5 installed on desktop...got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still not working...help please.

In any event, that camera was first supported by ACR version 7.4 which needs at least CS6 to run. Naturally, all later versions support it too.
Your choice is either to upgrade your Photoshop, or to look for, download, install, launch and run the free, stand-alone Adobe DNG Converter 8.6 on each folder containing your raw Canon files to convert them first to raw DNGs that you can open in CS5.
In no case does an Adobe application belong "on your desktop". The default install location should always be respected and left alone.

Can i install snow leopard on my new macbook pro which came loaded with Lion?

My new MBP came loaded with Lion. Can i install S.L. on it?

Don't install a version of Mac OS X earlier than what came with your Mac

Can not install software from Mac with Parallels

I have a Mac and I am running Parallels. I am running Windows 2000 in a virtual environment. Parallels recognizes other usb devices but not my 8330 Blackberry curve. It does not detect the device. If you go under device manager it shows the usb port with a question mark. If you open it there is a code 28. I have tried to uninstall and reinstall the software with no luck. i have tried desktop 4.3, 4.5, and 4,6 with no luck. I have tried updating the driver still no luck. Any suggestions would be appreciated.
Note: I am using version 4.0 of Paralllels.
Message Edited by pdagadget on 02-07-2009 07:59 AM

I had a similar problem recognizing and syncing my BB Curve 8330, but running XP under Parallels ver 3.0. I spent two days trying several versions of DM all the way up to 4.7 with no success. Then, I read in another post that Desktop manager would recognize and sync my BB Curve 8330 under Parallels 4.0 (I had 3.xx) so I upgraded and it worked!
Good luck!

How do I re-install software that came pre-installed on my mac?

How do I re-install software that came pre-installed on my mac?
I bought my first mac in 2003, in 2004 I bought MS Office: Mac. In 2006 I got another mac, this one (I'm pretty sure but not 100% certain) came with MS Office pre-installed. I'm still using that computer I got in 2006 (writing this message on it right now) and have been having problems with Word and have had no luck with trying to fix it. I recently came across my original installation disk for the version of MS Office I got in 2004. So, when I became frustrated trying to fix Word I just grabbed this old installer and reinstalled office, assuming in that moment that it was the same version I had been using. I got it all installed and working and went to load up my most recent document that I've ben working on and it won't load because it's a docx file. I don't know where else I would have gotten a new version of word, I'm not one for unnecessary updates and updating a word processor is about as unnecessary as it gets. I MUST have had a newer version of word pre-installed on my computer, because any time I've ever tried to open word files from this computer on my older mac the files wouldn't work, so any time I need to do that I either make a PDF or email myself the text.
Anyway, I'm assuming that apple has all my registration info on file and can confirm that I bought the software, can they provide my an installer? My other concern is that this computer was a christmas gift and was purchased by my dad, though I don't know whose name is on any kind of registration that may exist. The problem here is that he died, so I'm concerned that apple won't support my product because the original "owner" is deceased, even though I don't think he ever so much as laid a finger on this computer or even looked at it more than twice after he gave it to me.
What is my best course of action here?

I would have to presume the 2006 Mac was used, and came with Office 2008 on it from the seller. Apple has never offered Office as a bundled purchase, and it is not pre-installed with any Mac.
Since you have the disk for Office 2004, the activation key should be on a sticker on the CD/DVD sleeve. As I recall, anyway. I no longer have my 2004 copy to check. If you have the key, it doesn't matter who it originally belonged to. You can still enter it and activate the software.
Once you have that installed, you can install the XML converter for Office 2004. That will allow you to open from all newer Windows and Mac versions of Office. The only things that won't necessarily convert are features that don't exist in Office 2004, and so can't be translated correctly, or at all.
Microsoft is saying Office 2016 for Mac and Windows should be available for the official release sometime either late summer, or early fall. So hold off purchasing a new version if you can. MS offers to reduced upgrade price for Office. You'd pay full price for Office 2011, and then again for Office 2016.
And just to note. Office 2008 and Office 2011 work fine in Snow Leopard.

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

The HDMI adapter that came with New mac mini, would fit on the connection coming from my old mini. My monitor has receptor same as the end of the adapter.

The HDMI adapter that came with New mac mini, would fit on the connection coming from my old mini. My monitor has receptor same as the end of the adapter.

I found out that I have 2 female ends, my question is where can I find the adapter with 2 male connectors? and what about power supply to monitor?

How can I install Photoshop CS5 on a new iMac with no disc drive

How can I install Photoshop CS5 on a new iMac with no disc drive?

Hi,
Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
Please let me know if it helps.
regards,
Abhijit

I have an Imac using the old Classic operating system. The printer I was using died and I need a new printer that will work on the OS 9.1/9.2 operating system. Does the install disk that comes with the printer allow the computer to communicate with the

My printer died and I need a printer that is compatable with OS 9.1/9.2. Some printers say they are compatible with OS 9.1/9.2 but do they need a driver or is it included with the install disk that comes with the printer?

As long as the printer is accurately described as being compatible with OS 9.1/9.2, if it needs to have software (such as drivers) installed that software should either be included (usual) or downloadable from the net(usually from the manufacyrer's website).
Not all non-Apple printers need drivers installed. Some, such as many Postscript ones that connect via ethernet, are quite comfortable using the LaserWriter 8 printware that's part of OS 9. Some of those, though, may need to have a model-specific PPD (Postscript Printer Description) installed, a small document that informs the printware of the capabilities of the printer.

Why I can not install the iTunes to my new 64bit laptop??? I have never had this kind of problem before on my 32 bit old laptop...

I would like to get a help... I can not install the iTunes to my new (64bit) laptop... Why??? The installation stops somewhere after a few minute, looks like trying to install but can not go through until the end. I had my old (32bit) laptop and i have never had any problem with the installations... My new laptop is Asus (64bit), and the operating system just upgraded from Win8 to Win8.1....

Hello rafaelfromweymouth
Start with the first article and clear out any files in the Temp folder. You may need to remove iTunes and its related software and finally make sure that you have the 64-bit version of iTunes downloaded to install.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
iTunes 11.3 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Regards,
-Norm G.

How can I install software without Classic environment?

I've got a huge problem. My Powerbook hard drive failed and no data can be recovered. So, because I needed a new computer, I just got the new iMac intel. But here's why I'm freaking out. I've got a lot of software (like Quark Xpress 6 and Addobe Acrobat 6.0) that are all upgrades to previous versions. But since the new iMacs don't run Classic environment, I can't install the older versions of software so I can install my upgrades. What on Earth do I do? I'm a graphic designer - so I HAVE to have Quark on this new machine.
I have a lot of software in Windows format. I keep reading different things that say I can boot Windows on my new iMac. Does this mean there is a way for me to install software that runs on a PowerPC on my new iMac? If so, how do I do that?
I need all the help I can get with this one. I tried contacting Apple and did a chat with an Apple agent that got me nowhere. All I know is that I cannot afford to buy the full versions of software right after buying this new machine. HELP!!!!!!!

Congratulations on your new iMac.
Quark can be reinstalled by inserting the upgrader disk and double clicking the Quark upgrader icon. A dialog box opens that asks "In order to begin upgrading your current version of QuarkXPress you will be asked to locate the directory". At this point, while holding down the "Option" key, click the "ok" button. The install should go smoothly from there.
In regards to Acrobat, any older version requiring classic will not run on your new intel iMac. However, if you've already purchased an upgrade, i believe there is an option of opting to enter your old serial number, rather than pointing the installer to a previous installation when installing the upgrade.

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
How do I get version 4 to do this?
Thanks.

The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
1) type in longer strings that narrow the search
2) use an add-on to search just the beginnings:
https://support.mozilla.org/en-US/questions/1037469
3) install an older version of TB:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

How can I install Creative Cloud on a new computer? Should I uninstall the old computer?

How can I install Creative Cloud on a new computer? Should I uninstall the old computer?

Hi Bussada,
No, you dont have to uninstall Creative cloud from the other machine. You can use your Adobe ID to download and install the software on the other machine. Please ensure that you don't use both machine at the same time.
Download creative cloud desktop app from this link.
https://creative.adobe.com/products/creative-cloud
Regards,
Abhijit

Can't install OS 10.4 on new hard drive

I installed a new WD 320Gb hard drive in our PowerBook G4 today but can't load the os. I connected the G4 as a target to another mac and partitioned the new drive and erased it with zero. Everything looks good there but . . . the g4 wont recognize the original installation disk. If I just reboot and hold the c key, the computer gets hung up on a blue screen. If I reboot holding down the option key, the disk appears along with apple hardware test (which when run says that it doesn't support this machine). Also, I tried using the installation disk for a new mac mini (ox 10.5) That get's me to the choose language screen but then says it can't load the os. I can then get to the disk utility which sees the new hard drive and it appears to be configured properly.
thoughts?

are the install disks that come with the computer limited to that specific computer? We have 2 powerbook G4s (a 15 and a 17 inch) The 15inch is giving me the trouble. It's possible that I grabbed the install disk for the 17inch.
Never used the disks before. When I insert the disk, reboot and hold the c key, the computer eventually goes to a solid blue screen without anything on it and stops.
As an experiment, I inserted the install disk in the 15, then attached the 15 to the 17 as a target. Teh 15 mounted on the 17 with the install disk mounting. I then drilled down through the install files until I go to the os install package and double clicked. It started to install but after about an hour it ended with an error message.

Can I install Snow Leopard on the new 27" iMac on a separate partition and be able to run either operating systems?

I was able to do this on my older 27" iMac (2010). I could then hold down the Option key on startup and run either Mountain Lion or Snow Leopard. I've tried using a Time Machine backup, Carbon Copy Cloner, installing SL from another computer's dvd drive - all to with no success.
Does anyone have any other ideas?

Your 2010 most likely came with SL originally. Your new iMac does not and you have never been able to boot a Mac with an OS version older than what it came with. So, if yours came with Mountain lion, you are stuck with that. The only exceptions have been machines that were manufactured right around the time a new OS was being introduced - those could possibly still boot from the older system.

Can't install software that came with new Canon A540 digital camera

Similar Messages

Maybe you are looking for