Can't locate IP-printer

Hello,
I have recently bought the new Airport Extreme 802.11n.
Everything works fine, except I can't seem to locate my printer (Brother 1270N, laserprinter), which is hooked up to one of the Ethernet LAN-ports on the Airport.
I know I have to have the correct IP-adress, but how do knnow wich one that is? I haven't been able to locate it with the Airport Admin tools.
Per
PowerBook G4, 1 GHz Mac OS X (10.3.9)

I'm asking again, if anyone could help me with this :
My new Airport Extreme 802.11n can't find my printer, which is hooked to an Ethernet LAN-port. I can't figure out how to find the correct IP-adress of the printer. It doesn't show anywhere in the Airport utility program.
My printer is a Brother 1270N Laserprinter. Have used it as an IP-printer before with another router, and it worked fine.
Any suggestions much appriciated, thank you.

Similar Messages

Can't locate wifi printer

I just had a router change to Netgear and after stting up my printer (Brother MFC 490CW) and my iMac wireless to it, my computer can't locate the printer as it has done with the old router. Any help on this please?

Care to share which OS you are using?
Read the user manual that came w/your printer. Should be instructions in there regarding wireless set up. Also, contact Brother Support if their user manual is of no help.
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
==================
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***

"Add a Printer" can't locate my printer software even though it has been downloaded to the hard drive. How can I guide it to the software?

"Add a Printer" can't locate my printer software even though it has been downloaded to the hard drive. How can I guide it to the software?

What did you download and from where? Most downloads go to your Home/User/Downloads folder unless you've specified a different location in your browser.
If you downloaded the drivers from the App Store the drivers will be installed automatically and all you need to do is go to the System/Printers & Scanners preference pane as described below.
You will have to install the drivers after downloading the installer package. Lastly go to the System/Printers & Scanners preference pane and add the printer there. It will automatically locate the drivers and set it up.

HT4356 My iPhone will print to my air printer but my 3rd generation iPad will not. It can not locate the printer. Why?

My ipone will print to my air printer but my 3rd generation iPad will not. It can not locate the printer. Why? Bother running on iOS 6.01

Use this support document http://support.apple.com/kb/ht4356 to troubleshoot AirPrint.

I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2) turn it and wifi on on the phone. 3) connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!

Where can I locate my print code?

I have a HP photosmart D110 all in one and im trying to locate my print code so I can link my other laptops. PLEASE HELP !!

there should be a control panel on it .. select settings on there and then Display Network Configuration .. it should be there to print.

Can't locate AppleTalk printer on my net

I have a NEC Silentwriter 95f I haven't used in a while. I'm waiting for my regular inkjet to be replaced by Epson and trying to get this (network) laser printer on-line. It doesn't appear in the Chooser on my older Mac (or in Classic). Within OS X (10.3.9) it appears in the printer list and I can select it to print to but does not respond when attempting to print. (In the AppleTalk sub-menu the "Printer Model: Auto Select" is greyed out.)
I don't remember changing anything since it last worked. The Silentwriter is connected to an AsanteTalk box which is in turn connected to a NetGear hub. Everything is powered, Appletalk is turned on and I've checked and swapped cables as a precaution. My main test for seeing if it's on the network is using the Chooser on an older Mac where it used to appear reliably. Selecting LaserWriter nothing appears in the Postscript printer list. The printer works to the extent I can print a self-test page but I really don't know where to go next in trying to isolate the problem. I'd really appreciate any suggestions.
Thanks in advance,
Paul Dougherty
p.s. I have AppleCare for my newer Macs but network printers seems to be excluded re. support

I'm having a similar problem. I have a LaserWriter Select 360 that I'd like to use with my G5 tower. First I tried a USB to parallel adapter. I could not get the Mac to find the printer. I figured the preinstalled printer driver expected to connect via ethernet, so...
Then I tried using an an Appletalk to ethernet adapter to connect the printer to an Airport Express. I still could not get the Mac to find the printer.
I tried using IP printing by entering the IP address of the Airport Express and was able to choose LaserWriter Select 360 in the printer setup and made a desktop printer. When I try to print I get a message that "the Host is busy."
I have a feeling that this set up needs the IP address of the printer, not the Airport Express, but since the Mac still does not "see" it, I have no way of getting it's IP address. Is there a default IP address for the LaserWriter Select 360? Is there a way to print out a page with this info about the printer on it without it being connected to a computer?
I also have a small ethernet hub. I'm going to try to connect through that or disconnect my DSL and connect directly. Can I be connected to DSL and the printer with just a hub or do I need a router? I've only got 1 computer and a router seems like overkill.
If Apple ships my computer with a driver for my printer I assume they expect them to be connected. How do they expect them to connect– ethernet, USB, Airport?
Any suggestions?

CUPS can't locate network printer

I don't know if this is a network issue, or a PKGBUILD issue.
I have a Brother printer that is not one of the ones for which there is an AUR package already. So I just copied a PKGBUILD and .install from a similar model's AUR package. Here they are:
PKGBUILD:
# Based on brother-mfc-j625dw package from AUR
_model="j435w"
pkgname="brother-mfc-$_model"
pkgver="3.0.0"
pkgrel=1
_revision=1
pkgdesc="LPR and CUPS driver for the Brother MFC-J435W"
url="http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/index.html"
arch=('i686' 'x86_64')
license='unknown'
install="brother-mfc-${_model}.install"
depends=('tcsh' 'deb2targz' 'perl' 'a2ps')
if test "$CARCH" == x86_64; then
depends+=(lib32-glibc)
fi
source=("http://www.brother.com/pub/bsc/linux/dlf/mfc${_model}lpr-${pkgver}-${_revision}.i386.deb"
"http://www.brother.com/pub/bsc/linux/dlf/mfc${_model}cupswrapper-${pkgver}-${_revision}.i386.deb")
build() {
deb2targz *.deb >/dev/null || return 1
rm -f *.deb || return 1
cd $srcdir || return 1
[ -d "mfc${_model}" ] || (mkdir mfc${_model} || return 1)
for i in *.tar.gz;do tar xfz $i -C mfc${_model};done || return 1
cd mfc${_model} || return 1
cd opt/brother/Printers/mfc${_model} || return 1
perl -i -pe 's#/etc/init.d#/etc/rc.d#g' ./cupswrapper/cupswrappermfc${_model} || return 1
perl -i -pe 's#printcap\.local#printcap#g' $srcdir/mfc${_model}/opt/brother/Printers/mfc${_model}/inf/setupPrintcapij || return 1
cp -rf $srcdir/mfc${_model}/usr/ $pkgdir/ || return 1
cp -rf $srcdir/mfc${_model}/opt/ $pkgdir/ || return 1
md5sums=('7f891cbaddc07a1b86902c9c67cbcccb'
'8756f5964a9f9f811cc1b855f7593c2f')
brother-mfc-j435w.install:
post_install() {
post_upgrade;
post_upgrade() {
/opt/brother/Printers/mfcj435w/cupswrapper/cupswrappermfcj435w >/dev/null
if [ "$?" -eq 0 ]; then
printf "\033[1m\033[32m\x3d\x3d\x3e\033\1330m Done. The printer should be visible now via the CUPS-webinterface (http://localhost:631)\n"
else
printf "\033[1m\032[32m\x3d\x3d\x3e\033\1330m Something went wrong...\n"
fi
So, then I open up the CUPS web interface and voila, I see MFCJ435W ready to go! So, I print a test page and it fails with "Unable to locate printer "BRN0080928DFDD8.local"."
I have no idea what to do to diagnose and fix my problem. Help?

Do you have a mdns service configured? I am not sure if this is related, but zeroconf/avahi's .local domains get resolved by a multicast dns infrastructure:
https://wiki.archlinux.org/index.php/Avahi
oh found this: https://bbs.archlinux.org/viewtopic.php?id=127964

I hope it's Kappy reading this. My HP Laserjet successfully installed but can't create a print queue...

Hello Kappy - Thank you for persevering with my printer issues. Firstly, I use Firefox, recently updated & as yet have not discovered how to monitor downloads. The software for HP Laserjet 2200 was eventually automaticallly, and therefore correctly, installed.The Add Printer Pane accessed via the + button in the Printer & Scanner window is blank - the Name & Location and Print Using & Add areas are all grayed out, therefore I can't locate the printer driver even though it is in the Printer folder. I messed around with HP Direct Protocol & Line Daemon functions, entering my IP address, just to see if I could locate the printer driver - I could. However, I get a pop-up window which says 'Unable to verify the printer on your network' but it gives me the option of going ahead anyway, which I did. I was able to create a print queue, able to give a print command, the printer window opens, but the printer appears as 'busy', but of course it's not printing. To look at the issue from another perspective: previously I was running 10.5.8 on my old Power Mac G5 and a week before I shifted over the iMac I paused the printer but when tried to resume printing I got a pop-up message saying IPadmin > enter administrator name + password. Which of course I couldn't do - I discovered this was a bug afflicting10.5 & 10.6 operating systems; the only way I could get around it was by re-creating myself as a new administrator, which I did, and got the printer going again. So, if I have a "Network" printer perhaps there's another route to get the driver recognized... What do you think?
Alex Carr

Morning Alexander Carr,
Thanks for using Apple Support Communities.
Use this article to troubleshoot printer issues in OS X.
For more information on this, take a look at this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Best of luck,
Mario

Can't create a print queue on OS 10.7 via HP driver installed by Apple

I've ust bought a reconditioned iMac and am getting applications up and running, but I'm unable to get my HP Laserjet 2200DN printer working. The Add Printer pane (Print & Scan Preferences) remains blank: Name & Location and Print Using & Add areas are all grayed out, therefore I can't locate the printer driver even though it has been installed in the Printer folder. I've messed around with HP Direct Protocol & Line Daemon functions, entering my IP address, just to see if the printer driver could be located - it could. However, I get a pop-up window which says 'Unable to verify the printer on your network' but it gives me the option of going ahead anyway, which I did. I was able to create a print queue, able to give a print command, the printer window opens, but the printer is 'busy', but of course it hasn't been given the command to print anything. Any ideas?
Alex Car

Morning Alexander Carr,
Thanks for using Apple Support Communities.
Use this article to troubleshoot printer issues in OS X.
For more information on this, take a look at this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Best of luck,
Mario

6280 All-in-One printer - changing from USB to Ethernet connection - error - can't find the printer

I am trying to reinstall my C6280 All-in-One printer from the product CD - my original installation was for a USB connection, I would now like to reinstall to an Ethernet connection for use on our wireless nework. I have gone through the HP -Installing the Product Software in Windows XP for a Wired (Ethernet) Network Connection - instructions but keep getting the error message - Can't locate the Printer. I have connected the ethernet cable in the ethernet port of the computer and the router (Airlink 101). Any suggestions on what I might be doing wrong?
This question was solved.
View Solution.

Hi,
You can use the following link to setup the printer over a wired n/w.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01708573&tmp_task=setupCategory&lc=en&dlc=en&cc...
Just to confirm..Make sure that you connect the "Printer and Router using the ethernet cable"
To make sure that your printer is found during the installation, after connecting the ethernet cable, make sure that your printer is getting a valid IP address.
Setup Menu--Network--View Settings--Display Wired Summary.
Although I am an HP employee, I am speaking for myself and not for HP.

MacBook Air can't find my printer

Let me preface this by first stating that I am not technically savvy. Turning a computer on and off is about it for me. So I just purchased the HP 6835, took it out of the box and have been attempting to set it up. Everything appears to work fine by my Macbook Air can't find the printer. I've been trying to get this to find it for hours, reading almost everything. I then looked at the box it came in and it reads on the box that this Printer Supports OSX v10.9 Mavericks. My Macbook Air is running OSX Yosemite v10.10.3, is this why my Macbook can't locate the printer? If this is not the answer, any ideas would be great. Thanks, David

The printer shows up as its own wireless network in the list of networks
It shouldn't.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

Yosemite Mac Can't Locate Printer

I just got a new Macbook Pro last month. I am using a HP ENVY 4500 printer and occasionally, when I try to send a print job to the printer, it gets stuck in the "Connecting" stage, then when I wait long enough, I get the "cannot locate printer" message. I then restart my Macbook Pro and everything is fine again. When I only got this error once, I thought it might have been some minor glitch but this has happened twice now. Any ideas what could be causing this? Could this be a fundamental hardware issue or am I being overly paranoid?

Thank you so much for the assistance! I will definitely try the steps you mentioned when I encounter the issue again. Just as another update, I have tried turning my printer off and back on again to no success... It seems like restarting the Mac was the only solution so far. Also, just to be very specific with the issue, I will describe the events: (1) I sent a print job to the printer and it just says, "looking for printer" for a while. (2) I then get a message saying that the mac is unable to locate the printer. (3) I unplug the USB and re-plug it again and try again (when I do this, it seems like the printer is detected, but when I try to print, it loads for a while then again says that the printer is unable to be located). (4) I turn the printer off and back on and the same issue from (3) happens. (5) Finally, I restart the computer and send the print job and everything is fine again. I just want to make sure that there's nothing wrong with my Mac and that this sounds more like a software/incompatibility issue! How likely do you think that this is an issue with the hardware?

Can't locate Adobe PDF Printer

Hi there. I am trying to convert a word document to PDF at printing but my printer menu does not include the entry "Adobe PDF Printer." I have Windows XP with Adobe Acobat 6.0 Professional. How do I get the Adobe PDF Printer into the Printer menu? Thanks for your help.

Hi Tom, if repairing doesn't reinstall the PDF printer, you may have a Lexmark® printer installed or even QuickTime® installed. I've heard that both of those can prevent the PDF printer installing because it harnesses the Print Spooler so Acrobat is unable to install.
J.R.

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Can't locate IP-printer

Similar Messages

Maybe you are looking for