Can't locate .properties file on Visual Admin

Hello,
I have created an RID.properties file inside a DynPro application under src/packages/... and I am able to load it and get it's attributes from the DynPro code.
So far so good...
As far as I know this properties file can be viewd and modifed on the Visual Admin under:
Configuration Adapter -> webdynpro...
I've browsed all the folders at this location and couldn't locate my .properties file. So where is it...?
Roy

i think you only want to access and maintain the properties on server side...
ok, check out
http://help.sap.com/saphelp_nw04/helpdata/en/b8/aa343e32ff1033e10000000a114084/content.htm
for an example how to access the properties from your wdp app.
i suggest loading all props into a specific context node and corresponding attributes. perhaps there are better ways.
Now sth. uncomfortable:
Be careful when you redeploy your app. All properties are overwritten with the ones you defined locally.
you also cant delete the config on local side, it would be deleted on server, too. (at least i think so)

Similar Messages

I have downloaded iTunes 10.5 but after it downloads it vanishes and I can not locate the file anyway on my PC. I have done this a few times now. Any ideas?

have downloaded iTunes 10.5 but after it downloads it vanishes and I can not locate the file anyway on my PC. I have done this a few times now. Any ideas?

This has happened to me over the last few hours. iTunes just would not open, so I uninstalled and downloaded again. Still refuses to open. iPhone cannot be synced as a result. Help anyone...

How can I locate the file /Library/Keychains/FileVaultMaster.cer to reset my master password? Thanks!

How can I locate the file /Library/Keychains/FileVaultMaster.cer to reset my master password? Thanks!

The files that weren't inside the media folder on the original machine need to be copied over to exactly the same paths as they had on the source machine. See this thread for an ongoing discussion of a similar problem. See also this post on migrating the iTunes library.
tt2

I just converted wav to mp3, but now I can't locate the files.

I just converted wav to mp3, but now I can't locate the files.

make sure you have the exact path written correctly. If you can, show what the filename is in itunes, and the filename when you are looking at the song files (i.e. through my comuter). Make sure these are the same, and that they are all usable itunes formats.

Where can i find .properties file for jco connection?

For jco connection to SAP, we need .properties file. Is this file already contained in Exchange Profile or somewhere??
If yes, where can i find .properties file for jco connection or what is the path to this file?
OR, do we have to create manually??
Any help is appreciated.
Thanks.
Karma

Hi Karma,
Please take a look at these..
Where to set up the JCO connection?
http://help.sap.com/saphelp_nw04/helpdata/en/bc/42e13d82fcfb34e10000000a114084/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/bc/42e13d82fcfb34e10000000a114084/content.htm
cheers,
Prashanth

I was listening to a you tube clip. i guess i didn't click off the actual clip, because now when i turn on my computer the clip audio plays. i can't locate the file to delete it. please help.

i was listening to a you tube clip. i guess i didn't click off the actual clip, because now when i turn on my computer the clip audio plays. i can't locate the file to delete it. please help.

Quit Safari.
Hold the shift key down and relaunch Safari.
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Best.

How can I transfer iPhoto files from one admin user to another on the same Mac?

i created a new admin user on my computer, so now my husband has one and so do i. how can i transfer our iphoto files from his admin user to mine as a shared file? i was able to do this with itunes easily but i am not able to do it with iphoto.

You want to share the Library?
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

By mistake i deleted the Propertysheet.properties file in VC admin

Hi All,
I have an issue in visual composer, I did the following.. then i got the error when I logged into VC that "Proxy error : Server error : Failed to read models list"
1. Log on to Visual Administrator.
2. In the left panel, make sure the Global Configuration tab is chosen.
3. In the tree, expand the Services node and choose the Configuration Adapter service. In
the main pane, in the Display configuration tab, the Configurations tree is displayed.
4. Expand the development server node to display the client workspaces.
Under client workspaces i have gone to my login name under that by mistake i deleted the Propertysheet.properties file.
Then i refreshed the my model name, then the Propertysheet.properties file came.
Still I am getting the error. Can you help me out... Its very urgent to resolve this.. I will give points for good answers.
Thanks
Suresh.

Hi,
does this only happen for your user or for all?
Anja

Configuration (properties file) in Visual Administrator

Hi,
properties files can be edited in Visual Adminstrator (under Configuration Adapter) and there is also a description field. I thougt it would be filled with comments in the properties file, but the description field is always empty. It is possible to fill this field?
Regards,
Roman

Re: Storing constant values in OSB captures the earlier discussion.
Re: OSB: What is best practice for reading configuration information
Please go through above links and see they suit your needs.
Thanks
Manoj

Log files in Visual Admin of SAP Netweaver

Hi Netweaver Experts,
Could any one help me where to find the log files in Visual Administrator of SAP Netweaver. If you could mention the directory where the files are stored, that would be more helpful for me!!!
Thanks in Advance,
Raaj and Suniel

hi,
you can find the log files in the following directory.
<b><drive>:\usr\sap\<SID>\DVEBMGS01\j2ee\admin\log\system</b>
hope this info helps!
with regards,
Raj.
<i>pls, award points</i>

ITunes Can't Locate Original File - 7.7 error?

hoping someone out there can help me....
basically, I have 2 external hard drives. the first one is a 160GB hard drive, the second one is a 250GB hard drive. initially I had all of my music on the 160GB, but when it got too full I copied everything over on the 250GB drive, so I could add more music to it. everything's been working fine for 2 years on the 250GB drive until this weekend when all of the sudden, iTunes is now looking for the music on the old drive again, saying that it can't find the original file. the songs are all on the new drive, but for some reason it will only look for them on the old one. So - if I have BOTH drives on, everything works fine. If I turn the old drive off, iTunes can't locate 3/4 of my music. it's frustrating because all of the old stuff is on the new drive but iTunes won't see it. I've even tried copying some of the stuff from the old drive onto the new drive and itunes still seems to be looking for it the old drive even when I change the pathway to the new drive in the general preferences.
the only thing I can think of is:
1) buy a new larger drive and cut and paste everything onto it. not sure that that would fix it.
2) reinstall itunes, but I'm afraid of losing my settings and all of the movies,
apps, games I've bought etc.
anyone have any advice? is it a library file issue?

Yeah,
I've upgraded to 7.7 and have a large library of tracks on an external drive. I added them manually to the library - rather tedious, it took me about 3 days!
I was careful to choose the iTunes folder in the correct location and I chose to uncheck the "keep iTunes organised" box as it messes up where things are kept. I'm now starting to get ! against about 25% of the library. I really don't want to manually re-direct it to about 5,000 tracks. Is there any way this can be done en masse or is this a 7.7 bug?
This is a real pain. Can anyone help?
curly

Can't locate Referenced Files in Aperture 3

All my photo master files are in separate directories on a NAS (network attached storage; 4x1Tb) and I import Projects from that into Aperture on my IMac. I migrated my MAC Aperture Libraries to a separate external drive and lost some of the references to the Master. I can reconnect some Projects to the masters on my NAS, but not all. Some projects won't reconnect using Locate Referenced Files. I can find the files and match the photos and Aperture looks like it reconnected, but when I look at the separate images, I get "File not found." I know the original photos are on my NAS because I can see them using a separate PC hooked into it, but can't seem to complete making the link to the master. My intent is to move all masters into my Aperture Library because I can't stand losing photos this way anymore, but I need help making that link. Any ideas what's happening and what to do.
Even though I have the originals on my NAS, all my processed versions (4 and 5* photos) are in my Aperture Library and I hate to lose those.
Update: I seem to be able to connect one photo at a time, but selecting an entire set of Project photos and doing "connect all" doesn't seem to be working. I have thousands of photos and working one at a time is impossible.
How can I get help?
<Email Edited By Host>

I migrated my MAC Aperture Libraries to a separate external drive and lost some of the references to the Master.
How is your NAS formatted, where your original masters are stored? And how is the external drive formatted that holds your Aperture library?
Your Aperture library needs to be on a drive formatted Mac OS X extended, Journaled. If the drive should not have that formatting, move the Aperture library to disk with the coorrect format.
If you cannot reconnect originals, that are clearly there, the reason may be, that your Aperture library needs repairing, see: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
I'd try to repair permissions and to repair the library, before trying to reconnect again.
Since you want to consolidate all originals in your Aperture library, I'd try to copy the originals that cannot be recoonected, to the same drive that holds yor aperture libryr and try to reconnect them there, then consolidate them from there. It can be, that the network connection of the NAS is not reliable enough.
Regards
Léonie

TS1584 I had my iTunes libray on my old PC, just transferred to my new PC, downloaded iTunes, and my library is there, but can't play songs, says can't locate original files?

I had my iTunes library on my old Dell Inspiron, transferred all info to my new HP Pavilion PC, downloaded iTunes and my library is there, but when I try to play songs, it says can't play because can't locate the original files...how can I activate the songs to play? The iTunes library is also in my Windows media file, and the songs will play in there, but I set iTunes as my default music manager and want the songs activated in my iTunes library so I can play them and sync my iPod. Help? Thanks.

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
See also Getting iTunes & Windows Media Player to play nicely
tt2

Can't locate song files!!!

So the family's iTunes account was transferred to my new laptop because the previous one was getting old and slow. Our computer genius transferred everything seamlessly and it was fine. However, as of late, we are missing over 300 songs on our library. The songs are playing on our iPods but not on iTunes. The songs are "there" in iTunes however every time you go to play them, it says it can't locate file. When trying to locate file, none of the songs are there! What do we need to do to get our songs back and playing?? Any help is much appreciated! Thank you

IF the songs are not actually on the drive, then they are not there.
The only resolution is to either copy them from the old computer or the backup of your old computer...
Syncing with iTunes is one way, computer to idevice.

Classpath root for locating properties file?

I'm trying to read a property file from a pluggable Reports destination. I've tried placing it in the domain root and in the domain lib folder (I'm sure it was picked up there in a previous release) but I can't appear to find it.
What is a general classpath root that could be used for storing properties files in?
Thanks in advance,
Nik

Open your %DOMAIN_HOME%/server/AdminServer/logs/AdminServer.log and search for java.class.path.
You'll see all classpath roots available, I'm using %DOMAIN_HOME%/config/soa-infra.
Cheers,
Vlad

Can't locate .properties file on Visual Admin

Similar Messages

Maybe you are looking for