Can't Locate Rendered Files

Premiere Pro CC
Macbook.
I am around 2 minutes deep into a well polished project, When i opened the project, my latest rendered images weren't there.
The entire project was still fully rendered but seemed to be a much earlier save than my last save.
I reopened the project and was prompted to locate the rendered files, but when i finally locate them they are greyed out/or have mysteriously jumped out the folder.
I have not moved any files whilst making this project, although it would seem that all the latest rendered files have moved to another location.
I searched for all my rendered files and dragged them into a folder on the desktop, but in the file locator the new folder doesn't display any files at all, even with the box untucked for display only exact images.
This seems like a major glitch to me, but i can't help think i've made an error along the way.
Thanks in advance!

IF the songs are not actually on the drive, then they are not there.
The only resolution is to either copy them from the old computer or the backup of your old computer...
Syncing with iTunes is one way, computer to idevice.

Similar Messages

  • I have downloaded iTunes 10.5 but after it downloads it vanishes and I can not locate the file anyway on my PC.  I have done this a few times now. Any ideas?

    have downloaded iTunes 10.5 but after it downloads it vanishes and I can not locate the file anyway on my PC.  I have done this a few times now. Any ideas?

    This has happened to me over the last few hours. iTunes just would not open, so I uninstalled and downloaded again. Still refuses to open. iPhone cannot be synced as a result. Help anyone...

  • How can I locate the file /Library/Keychains/FileVaultMaster.cer to reset my master password? Thanks!

    How can I locate the file /Library/Keychains/FileVaultMaster.cer to reset my master password? Thanks!

    The files that weren't inside the media folder on the original machine need to be copied over to exactly the same paths as they had on the source machine. See this thread for an ongoing discussion of a similar problem. See also this post on migrating the iTunes library.
    tt2

  • I just converted wav to mp3, but now I can't locate the files.

    I just converted wav to mp3, but now I can't locate the files.

    make sure you have the exact path written correctly. If you can, show what the filename is in itunes, and the filename when you are looking at the song files (i.e. through my comuter). Make sure these are the same, and that they are all usable itunes formats.

  • I was listening to a you tube clip.  i guess i didn't click off the actual clip, because now when i turn on my computer the clip audio plays. i can't locate the file to delete it. please help.

    i was listening to a you tube clip.  i guess i didn't click off the actual clip, because now when i turn on my computer the clip audio plays. i can't locate the file to delete it. please help.

      Quit Safari.
      Hold the shift key down and relaunch Safari.
    Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Best.

  • Help locating rendered files for relinking after a crash.

    I am working on an adobe premier pro project and my computer crashed yesterday. the project file no longer opens as it is asking where certain rendered files are located...  I do not know where premier is hiding them so when I hit skip or try to offline them the project tries to open and it freezes up. I was able to open an auto save file but now the project runs very very slowly... every click or action takes the computer about 2 minutes to respond and if I click while it is thinking... it crashes.
    HPZ400 workstation
    win 7
    CS5

    Maybe a shot in the dark, but did you at anytime change your project scratch disk settings at any time. If not maybe have a look at the Default folder for scratch disk settings. Can't remember exactly where it is but it will be on your boot drive under user/ your name or failing that try relocating it by copying  the file asked for when PP loads and do a search on your entire machine. This may reveal something usefull like a location where stuff has been saved.
    Hope that helps.
    Dave.

  • ITunes Can't Locate Original File - 7.7 error?

    hoping someone out there can help me....
    basically, I have 2 external hard drives. the first one is a 160GB hard drive, the second one is a 250GB hard drive. initially I had all of my music on the 160GB, but when it got too full I copied everything over on the 250GB drive, so I could add more music to it. everything's been working fine for 2 years on the 250GB drive until this weekend when all of the sudden, iTunes is now looking for the music on the old drive again, saying that it can't find the original file. the songs are all on the new drive, but for some reason it will only look for them on the old one. So - if I have BOTH drives on, everything works fine. If I turn the old drive off, iTunes can't locate 3/4 of my music. it's frustrating because all of the old stuff is on the new drive but iTunes won't see it. I've even tried copying some of the stuff from the old drive onto the new drive and itunes still seems to be looking for it the old drive even when I change the pathway to the new drive in the general preferences.
    the only thing I can think of is:
    1) buy a new larger drive and cut and paste everything onto it. not sure that that would fix it.
    2) reinstall itunes, but I'm afraid of losing my settings and all of the movies,
    apps, games I've bought etc.
    anyone have any advice? is it a library file issue?

    Yeah,
    I've upgraded to 7.7 and have a large library of tracks on an external drive. I added them manually to the library - rather tedious, it took me about 3 days!
    I was careful to choose the iTunes folder in the correct location and I chose to uncheck the "keep iTunes organised" box as it messes up where things are kept. I'm now starting to get ! against about 25% of the library. I really don't want to manually re-direct it to about 5,000 tracks. Is there any way this can be done en masse or is this a 7.7 bug?
    This is a real pain. Can anyone help?
    curly

  • Can't locate Referenced Files in Aperture 3

    All my photo master files are in separate directories on a NAS (network attached storage; 4x1Tb) and I import Projects from that into Aperture on my IMac.  I migrated my MAC Aperture Libraries to a separate external drive and lost some of the references to the Master.  I can reconnect some Projects to the masters on my NAS, but not all.  Some projects won't reconnect using  Locate Referenced Files.  I can find the files and match the photos and Aperture looks like it reconnected, but when I look at the separate images, I get "File not found."  I know the original photos are on my NAS because I can see them using a separate PC hooked into it, but can't seem to complete making the link to the master.  My intent is to move all masters into my Aperture Library because I can't stand losing photos this way anymore, but I need help making that link.  Any ideas what's happening and what to do.
    Even though I have the originals on my NAS, all my processed versions (4 and 5* photos) are in my Aperture Library and I hate to lose those.
    Update: I seem to be able to connect one photo at a time, but selecting an entire set of Project photos and doing "connect all" doesn't seem to be working.  I have thousands of photos and working one at a time is impossible.
    How can I get help?
    <Email Edited By Host>

    I migrated my MAC Aperture Libraries to a separate external drive and lost some of the references to the Master.
    How is your NAS formatted, where your original masters are stored? And how is the external drive formatted that holds your Aperture library?
    Your Aperture library needs to be on a drive formatted Mac OS X extended, Journaled. If the drive should not have that formatting, move the Aperture library to disk with the coorrect format.
    If you cannot reconnect originals, that are clearly there, the reason may be, that your Aperture library needs repairing, see: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
    I'd try to repair permissions and to repair the library, before trying to reconnect again.
    Since you want to consolidate all originals in your Aperture library, I'd try to copy the originals that cannot be recoonected, to the same drive that holds yor aperture libryr and try to reconnect them there, then consolidate them from there. It can be, that the network connection of the NAS is not reliable enough.
    Regards
    Léonie

  • TS1584 I had my iTunes libray on my old PC, just transferred to my new PC, downloaded iTunes, and my library is there, but can't play songs, says can't locate original files?

    I had my iTunes library on my old Dell Inspiron, transferred all info to my new HP Pavilion PC, downloaded iTunes and my library is there, but when I try to play songs, it says can't play because can't locate the original files...how can I activate the songs to play?  The iTunes library is also in my Windows media file, and the songs will play in there, but I set iTunes as my default music manager and want the songs activated in my iTunes library so I can play them and sync my iPod.  Help?  Thanks.

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    See also Getting iTunes & Windows Media Player to play nicely
    tt2

  • Can't locate song files!!!

    So the family's iTunes account was transferred to my new laptop because the previous one was getting old and slow. Our computer genius transferred everything seamlessly and it was fine. However, as of late, we are missing over 300 songs on our library. The songs are playing on our iPods but not on iTunes. The songs are "there" in iTunes however every time you go to play them, it says it can't locate file. When trying to locate file, none of the songs are there! What do we need to do to get our songs back and playing?? Any help is much appreciated! Thank you

    IF the songs are not actually on the drive, then they are not there.
    The only resolution is to either copy them from the old computer or the backup of your old computer...
    Syncing with iTunes is one way, computer to idevice.

  • Can't locate original file error

    Hi,
    I am trying to watch iTunes TV Shows I have paid for and downloaded, however when I go to click on them I keep getting the below error message (picture attached)  does anyone have a solution or can point me in the right direction (In laymen terms please) MacBook Pro beginner.
    Kind regards - thanks in advance - merry christmas
    Jo

    Hello there, papillondefer.
    When attempting to locate missing content in iTunes, the following Knowledge Base article offers up some great recommendations:
    iTunes: Finding lost media and downloads - Apple Support
    Start with these steps first:
    Follow these steps to locate your missing iTunes media:
    Resume any interrupted downloads.
    Choose iTunes > Store > Check for Available Downloads.
    Click Resume if any downloads are listed as unfinished. Learn more about how to resume interrupted iTunes Store downloads.
    Check your iTunes media folder.For Mac OS X
    Open Finder.
    From the Side Bar, click your Home folder (the folder named after your user account).
    Go to Music > iTunes > iTunes Media.
    You may need to go to Music > iTunes > iTunes Music if the iTunes Media folder is empty.
    Open the corresponding folder for the file type you're looking for. The contents of the folder will be listed in alphabetical order. Depending on the folder, the files will be sorted by artist, author, or title.
    If you couldn't find your lost media in the iTunes Media folder, check your preferences in iTunes to see if your media is in another location.
    Check your Trash (Mac) or Recycle Bin (Windows).If you find any of your missing items, you can add them to your iTunes library.
    Mac OS X: Control-click (or right-click) the item and choose Put Back.
    Windows Vista, Windows 7, and Windows 8: Right-click the item and choose Restore.
    Windows XP: Right-click the item and choose Restore.
    If your media doesn't reappear in your iTunes library after you restore the item, locate the restored file in your iTunes Media folder and drag the item into your iTunes library window.
    If you still can't locate the media, the article offers more options under "Still can't find your media?".
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • ITunes can't locate music files

    Any music that was copied into my iTunes music folder cannot be located. Anytime that I try to play the file from iTunes, it shows an error message, requests that I locate the file, and then proceeds to tell me that I need to format my hard drive. When I try to open my iTunes music folder directly, my computer freezes and then after 10 minutes informs me that my hard drive needs to be formatted. I never had this problem until I downloaded the new version of iTunes. This is only going on with music I have copied into my iTunes folder, which is all the CDs I have or had. Many of these CDs I no longer physically have. I have tried to use a previous iTunes library to fix the problem. I have also moved my preferences files to the desktop as suggested in another thread, but neither have worked. I am not having any other problems with my computer that would encourage me to format my hard drive besides this issue. I would appreciate any help possible with this predicament.
    Compaq Presario V2000   Windows XP   AMD 64, 60GB

    Any music that was copied into my iTunes music folder cannot be located. Anytime that I try to play the file from iTunes, it shows an error message, requests that I locate the file, and then proceeds to tell me that I need to format my hard drive. When I try to open my iTunes music folder directly, my computer freezes and then after 10 minutes informs me that my hard drive needs to be formatted. I never had this problem until I downloaded the new version of iTunes. This is only going on with music I have copied into my iTunes folder, which is all the CDs I have or had. Many of these CDs I no longer physically have. I have tried to use a previous iTunes library to fix the problem. I have also moved my preferences files to the desktop as suggested in another thread, but neither have worked. I am not having any other problems with my computer that would encourage me to format my hard drive besides this issue. I would appreciate any help possible with this predicament.
    Compaq Presario V2000   Windows XP   AMD 64, 60GB

  • Can't locate music files?

    I have recently moved my iTunes library onto a network drive and iTunes is happily playing music from the new location.
    In iMovie on the other hand all I get is "The song xxxxxxx could not be used because the original file could not be located.".
    Surely iMovie uses the iTunes library reference to locate music files? What have I done wrong? How to I tell iMovie where to look for the music files?
    Thanks.

    I have recently moved my iTunes library onto a network drive and iTunes is happily playing music from the new location.
    In iMovie on the other hand all I get is "The song xxxxxxx could not be used because the original file could not be located.".
    Surely iMovie uses the iTunes library reference to locate music files? What have I done wrong? How to I tell iMovie where to look for the music files?
    Thanks.

  • Songs in my itunes don't play anymore.  It says it can't locate original files.  HELP please.

    The songs in my itunes no longer play.  I have never had this problem before.  I was trying to update playlists, etc. and the songs were not transferring to my Iphone.  The error message for every song is that the original file cannot be located.  It asks if you want to locate file.  I press yes, but it says that it is not available.  Does anyone know how to either locate the files or reinstall the music.

    iTunes forum has the answers.

  • Open song in library...Can't locate original file????

    Open song in library........... Won't play  pop-up say 'Cant locate original file'??

    Also it keeps promping for 'Permission' to play this file.

Maybe you are looking for

  • How to synchronize a cell in form with a cell in MS excel sheet

    dear all I can successfuly export data to excell using the ole2 package. But the problem is that exporting data from A datablock in a form to Excel sheet is not enough. I need to automaticaly copy updates occures on the datablock to its equilivant in

  • Multiple queries and formatting issues

    I am running a report with 2 queries in a csv format. It displayed the right format with one query but with the new query , I have all sorts of formatting issues. The data is displayed in random cells. Why would this happen? Any ideas? thanks

  • Print in FormatA3

    Hi everyone, actually I make an intership in a society and it's my last week. And durinf more than 4 weeks, I hardly tried to print a Jpanel in A3 format. So I explain more : my JPanel has 3 parts : one with textarea, JLabel, JTextfield... and the tw

  • Apple ID not working with iTunes

    Hi, After I updated to the most recent update (7.04) the iTunes Store won't let me update apps. When I press update all or just one of the apps it asks me for my password for my id. I put it in but iTunes doesn't seem to recognize it, like before the

  • Reindexing and Incremental Update

    Indexes can be scheduled,but I don't know they are scheduled for Reindexing or for Incremental Update. If I want them to work as Incremental Update everyday and work as Reindexing everyweek, what do I have to do?