Can't login to hp eprint: eprint forwards to hpconnected forwards to eprint...
I can't login to eprint anymore. Which means I can't change my eprint settings, authorized email Adresses, check my printers - I'm simply looked out. So the "service" is funamentaly broken to me.
The reason? eprint is now hp connected for some reason (probably some marketing people which care more about branding than if the product actually works).
I am forwared from eprint login to hp connected, wich forwads me to the eprint login to hp connected... it's just an endless loop.
It seems switzerland was just changed to hp connected a few days ago, but the forums are full of users which experience the same issue already 6 months ago, in september 2013.
It seems that the english / us page is the only one where all the new forwards are correct, international pages seem to be fundamentaly broken.
Of course this does not hinder HP to continue the worldwide rollout, instead of fixing the bugs.
So now it hit me - I am looked out from HP connected, or should I call it HP disconnected?
What can I do? I tried different browsers and computers with no luck.
And - DO YOU EVER TEST? And do you do on your international pages or just the us one? It's not the first time I had issues with the HP page which constantly forwards to broken links and dead-ends, well, wich is not to surprising consindering what a mess of hundreds of systems and servers patched together by random forwads the whole page seems to be.
If you change your website and services make sure the changes work befor you go live.
I rely on eprint, but have to learn relying to an HP service seems to be a bad idea.
HP eprint
Login screen
forwads to the notice eprint now is hpconnected
"change to hp connected" forwads you to - eprint!
which presents the eprint login window
which splashes a screen eprint is now hpconnected
from where you are send straight to eprint again...
just embarrassing.
As I already wrote, the hp connected site redirects to the hp eprint site within a fraction of a second.
My country and region is set to switzerland, and it never was set to anything different.
If I try to reset the password (also aready did this), which I only can do on the eprint site, because the hp connected site immediately redirects me, I get a message I already changed to hp connected and i should do so there.
Guess what happens if I press "switch to hp connected" on this pop up.
Right. I am redirected to the eprint login screen.
I made a series of rapid screenshots so you can observe the adressbar with its redirection orgies from hell.
Problem is your stupid hp disconnected site immediatly spits me back to eprint, does'nt matter what I try to do.
so, 2014-02-23 at 08.06.06, lets try hpconnected.com (or your direct link to sing in, it happens the same)
Bildschirmfoto 2014-02-23 at 08.06.10 , it it's loading...
2014-02-23 at 08.06.11... redirecting to... yeah, back there...
So try to get the login window 2014-02-23 at 08.06.19
and "forgot password"... 2014-02-23 at 08.06.31
ok... 2014-02-23 at 08.06.34 - oh, a message, I already changed to hp connected. Lucky one...
So press "change to hp conneced" 2014-02-23 at 08.06.38
for a moment, in the adress bar the link to the hp connected singing page appears...
2014-02-23 at 08.06.40 - 2 seconds later.
Back to hp eprint.
I don't know who implemented or is responsible for this, but maybe he/she should get a job in your cafeteria. It's better for everyone.
Similar Messages
-
Can not login with email address and password registered with HP
I set up an eprint D110 at another location. I am trying to send to that printer. I can not login to eprint with the email address and password that I set up. What do I do now?
Hi there, are you having trouble logging into the ePrint Center at this point (see the image below)?
If so, you can click on the Forgotten your password link where you will be prompted to enter the e-mail address you used to setup your ePrint Center account. If you can't remember the e-mail you used to setup the account you can do the following:
From the display on your printers front panel remove web services by clicking Setup>Wireless>Web Services
Once this is done, re-enable web services by following the same path. The printer should print an information sheet once you've re-enabled web services. This sheet will contain a new printer code.
In ePrint Center click the Sign-In button and then select the Sign Up option at the top of the box
Go ahead and setup a new ePC account and when prompted enter the new printer code from the information sheet
Your printer is now no longer attached to your old ePC account and will show up in the Printers section of your new account.
Just be aware that the printer now has a new e-mail address so if you've shared the previous address with family or friends you'll need to let them now the new one.
If you found this reply helpful please click the kudos button and if it solves your problem please click the Accept as Solution button so that other forum users may use the solution to help solve their problem.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
Missing Images and CSS when going to portal/server.pt can't login
Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
======= Diagnostic Run Complete =======
Startup completion percentage: 100% (50 steps out of 50 complete)
===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) externalI am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps. -
Can't login to my account after upgrading to Mavericks
I have a late 2008 Macbook Pro. I have had no problems up until upgrading to Mavericks. I did a complete backup using Time Machine prior upgrading. I have a 750 GB hard disk with about 70 GB of free space. This computer has been bullet proof for 5 years now.
Anyway, I tried to upgrade to Mavericks when the OS came out but was unsuccessful at that time. It just hung up halfway through the install. I decided to just restore than to waste time figuring out what happened.
Fast forward to yesterday. I decided to give it a try again. The download and install completed without any problems. However, I can not login to my machine using my account. After entering my password, I am just getting the spinning rainbow wheel or whatever it is called. Techincally, I have two accounts, one for me and one for girlfriend. She never used hers so mine has been the only one we have ever used on the computer. That account does have admin permissions and that is also the one where I started the upgrade from.
Things I have tried so far...
1) Added another admin account to try and remove unused applications just in case old programs were no longer compatible. Btw, I can successfully log into this account. This is actually the account were I am logged into currently and using Safari to document this problem.
2) Launched File Utility. I did verify disk permissions and then repair after it completed. No luck. I also did Verify Disk but that did not return any problems.
3) I also did a reinstall of Mavericks again but the same problem still exists.
Btw, I did notice when logged in as Admin to the newly created account, that the Downloads, Desktop and Movies folder under my original user account have a little icon or stop sign next to their name when viewing through Finder. Permission problem? Even if that is the case, not sure why I would not be able to login into my original account.
Any ideas? Worst case I will restore my backup and just forget about Mavericks all together. I guess if I have nothing better to do some day in the future maybe I will do a fresh install and try to restore my personal files back. However that sounds like a lot of work.
Thanks..Try this
-
[SOLVED] Can only login to Arch forum with Firefox
Hi everyone,
I'm a new member and thus do not familiar with the rule. Please tell me if I post in the wrong place !
I have registered a new account on Arch forum. However, I can only login with Firefox.
When I try to login with other browser (Opera, Chromium, Konquerer), it says:
Redirecting
Logged in successfully. Redirecting …
Click here if you do not want to wait any longer (or if your browser does not automatically forward you)
And then redirect me to the previous page without changing my login status.
When I login with Firefox, everything is normal. My login status is changed and I can post this one !
I have just installed Arch Linux this afternoon and have not changed anything.
Does the forum have problem?!
Anyone has the same problem with me?!
Last edited by BlueLaguna (2012-11-28 21:42:16)Your SYSTEM is broken because a browser does not work? And that requires a reinstall?
There may be a problem during installation. That's what I mean.
Anyway, I have just installed Arch Linux. Firefox is still the only browser that work.
Your time would be better spent fixing the problem first. Cache or configuration, pick one or both.
I'm pretty sure that cache and configuration are not concerned with this problem. I'm a web developer and I know these stuffs.
Besides, I don't think that we need to config anything with a newly installed browser. If the default settings do not work with normal website, it's a bad browser (in this case, we have three bad browsers: Konqueror, Chromium, Opera... and may be more).
I'm using KDE and I don't know whether this problem comes from KDE or not. However, I can login to many other forums with Konqueror, Opera and Chromium.
This forum may not create the session or cookies correctly when I use other browsers.
Anyway, If no one confirms that he or she has the same problem, let's close this topic here. -
Can't login to ML server network user from a client
Hi,
The computer name on my customer's ML server was changed post OD installation. Now I can't login with network user credentials from a MacBook.
I also see the old server/hostname displayed in workgroup manager under "location" (see attached).
I've tried destroying OD by deleting it in Server app then re-adding it again but it still shows the old name in WGM as shown in the screenshot above.
I suspect this is related to authentication problems. Should I be running a utility like changeDirData.pl to update the old values? If so, what is the syntaxt?
Old name was: server1.stmarys.lan
New name is: server1.local
I ran the following: sudo /Applications/Server.app/Contents/ServerRoot/usr/libexec/changeDirData.pl -i -s 192.168.2.2 -u diradmin -o server1.stmarys.lan -n server1.local
But got an error: cant contact ldap server to get config infoAfter contacting Apple server support, I was told there were two issues:
1- ".local" cannot be used in a hostname due to conflict with Bonjour
2- Hostnames must have three parts like "server.company.lan" & "server.lan" cannot be used
I wish Apple would inform users with a pop-up about these rules before they waste a lot of time having to re-do everything from scrath. I was lucky enough to have an export of all users.
If these rules are followed from the begining, DNS would auto-configure itself with the appropriate forward & reverse records. -
Can't Login to New OD Master - Even when bound to OD
This is a completely new server installation on a multi-core MacPro of Leopard Server 10.5. I have followed best practice standards by configuring DNS first and double checking with changeip command. I than went from Standalone to OD Master and all the setting checked out. I configured DHCP for our small network. That worked fine. I than configured a home directory share with automount, created one new account and created home directory. I verified login to the server and creation of the home directory. Server updates are also done now.
Now the confusing part. I took a Mac OS X Leopard client machine, fully updated and used Directory Utility to bind client to server. Directory Utility reports bind is operational and working. I can use the Directory app to see myself as a user. HOWEVER - I can NOT login to the OD Master as the user I setup. The login screen just shakes me off as if the password is wrong. It is not.
I looked at the OD logs and I am being successfully autheticated by server. The client just refuses to login. I have tried 10.4 and 10.5 clients.
What have a messed up? <grin>Hi
I'm guessing when you supply the user name and password there is a slight delay before you get the shake? is that correct? Or do you provide the user's credentials and you get the shake immediately with a message telling you the AFP or SMB Server can't be found?
To start with verify if the created user is a principal of the Kerberos Realm. On the server issue:
sudo kadmin.local -q list_principals
amongst other things you should see an entry for that user. Something like [email protected]
What you can do is to unbind. Remove the DirectoryServices folder and the edu.mit.Kerberos file from /Library/Preferences, restart the client and then place the Server's IP address in the client's DNS Server's field as well as the Domain name in the Search Domains field. Use Terminal and the host command to resolve the server's fqdn and then its IP address from the client. This will qualify the server's DNS service on the forward and reverse pointers. Use Directory Utility to bind to the Server using its IP address alone and don't bother with authenticated binding. Double-check the edu.mit.Kerberos file has been created in /Library/Preferences (this is evidence that you have received a TGT - you can refer to the server logs as well that should show this happening), log out of the local admin account and select Other. Go for the log in again and hopefully you should be now logged in with a network user's account and home folder.
Hope this helps, Tony -
The same user can only login once
Hello,
I have a problem with my system. I made a system where you must login.
I use the following code:
boolean login = false;
String username= request.getParameter("username");
String password= request.getParameter("password");
User user= Usermutations.makeviaUsername(username);
if (user.getPassword().equals(password) && !password.equals("")) login= true;
if (login) ReqD = getServletContext().getRequestDispatcher("/Overview.jsp");
else ReqD = getServletContext().getRequestDispatcher("/False.jsp");
request.getSession().setAttribute("user",user);
request.getSession().setAttribute("username",username);
request.getSession().setAttribute("password",password);
if (ReqD != null) ReqD.forward(request,response);
//Clean up resources
public void destroy()
Now I want that the same user can only login once. So when a user login with his username and password, no one else can login with that user name and password.
I don't wan't to put the username in the database and then validate if the user is already logged in, because then the user must logout and not close the webbrowser else the user stays in the system.
Does anyone knows a solution top this problem.
Thanks in advance,
HenkSo I wan't the database and when the user is logged in
the name is set in the database. But when the user
clicks on the X (close button in the browser his
username must be deleted from the database)You can't tell when the user does that (or perhaps you can sometimes, with difficulty). But even if you could it doesn't solve your problem. Many people keep their browsers open all day, and -- you may find this shocking -- they go to sites other than yours.
So basically, if you don't provide them with a logout button you can't tell when they "leave" your site. And even if you do provide them with a logout button, they won't necessarily bother to use it. So you're left with waiting until the session expires, and then logging them out. This also means that if they come back to your site while the session is still active, then they are still logged in. This is not an error and you should not treat it as one.
PC² -
mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND. -
Can not login to Oracle Application Express after upgrade to 3.2
I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
Thanks,
JulieHI Don,
I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
Any idea?
By the way, what does apxxepwd.sql do?
Thanks,
Julie -
Can't login into NW after a new patch.
Hi experts.
Yestoday I installed a new patch KB70010,after that use command SGEN to compile all source in component BASIS.This process began and said theres 2 hours left to complete.
But this morning i can't login into the system,seems the SGEN not successful or sth else.....
disp+work is in yellow status with a message: Running but not connected to Message Server.J2EE status info unavailable.
here's the developer trace.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid ER1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 6112
Tue Jun 03 10:51:31 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6112) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Tue Jun 03 10:51:36 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Tue Jun 03 10:51:41 2008
ERROR => OpenProcess PID 3180 failed for checking semaphore 4
ERROR_INVALID_PARAMETER: The parameter is incorrect. [semnt.c 1892]
DpIPCInit2: start server >EXXEPT01_ER1_01 <
DpShMCreate: sizeof(wp_adm) 26752 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 073F0040, size: 4661816)
DpShMCreate: allocated sys_adm at 073F0040
DpShMCreate: allocated wp_adm at 073F1E40
DpShMCreate: allocated tm_adm_list at 073F86C0
DpShMCreate: allocated tm_adm at 073F86F0
DpShMCreate: allocated wp_ca_adm at 077C7990
DpShMCreate: allocated appc_ca_adm at 077CD750
DpShMCreate: allocated comm_adm at 077CF690
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07850550
DpShMCreate: allocated gw_adm at 07850590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 078505C0
DpShMCreate: allocated wall_adm at 078505C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1632
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1351
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( EXXEPT01) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >EXXEPT01_ER1_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Tue Jun 03 10:52:21 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jun 03 10:52:41 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2056
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1407
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTEDI found a suspicious log dev_jcontrol, maybe it will do some help.
There's some deadlock at end....
trc file: "D:\usr\sap\ER1\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 2612
system name : ER1
system nr. : 01
started at : Tue Jun 03 14:13:53 2008
arguments :
arg[00] : D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
arg[01] : pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=3675
arg[04] : -DSAPSYSTEM=01
arg[05] : -DSAPSYSTEMNAME=ER1
arg[06] : -DSAPMYNAME=EXXEPT01_ER1_01
arg[07] : -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4756] Tue Jun 03 14:13:53 2008
[Thr 4756] *** WARNING => INFO: Unknown property [instance.box.number=ER1DVEBMGS01exxept01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.host=EXXEPT01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.port=3202] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties;D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
-> ms host : EXXEPT01
-> ms port : 3902
-> OS libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> files [01] : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : EXXEPT01
-> ms port : 3902
-> os libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] sdm : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
[Thr 4756] *** WARNING => JsfOpenShm: ShmCreate (69, 295952, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c 715]
[Thr 4756] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c 761]
[Thr 4756] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c 1714]
[Thr 4756] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 271]
[Thr 4756] JControlCloseProgram: started (exitcode = -1)
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
[Thr 4756] JControlCloseProgram: good bye... (exitcode = -1)
[Thr 3152] Tue Jun 03 14:22:52 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:37:56 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:53:01 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:08:05 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:23:09 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ? -
How can I login with my admin user after the "file vault-security option" disabled?
My HD was full. So i deleted the biggest files related to file vault. After that i disabled the file vault option in security preferences, and restarted the machine. When i tried to connect again, appear the message"error in file vault". How can i fix?
I have the same problem. My Mac Mini server will not let me reset pram or safemode. Can't login. Help
-
Apple tv 2 problem: I can not login with my ID account!!!!!
apple tv does not login with my ID! Do you have a solution? Since a few weeks I can not login in with my password...
I tried everything:
- re-starting apple tv.
- login on macbook with my apple ID with new passwordSignal Strengh on WiFi was great (its a new Apple Time Capsule and has to be reset often). Checked the internet connectivity on other machines too (incase that was inop). I checked the network first as that is typically a impediment to all other things working prior to my previous comment. I logged in to iTunes and MobleMe to see that my password was correct and working. hmmm.
I reset the Apple TV next and again changed my iTunes password on my laptop, then ran a network test (which needs a itunes password to work). Network check was successful and I am logged back in.
Now it says...."Netflix is currently unavailable. Try again later".
geez. -
I can't login into my macbook pro under my user , only as a guest.
My MacBook pro is taking forever to load. I can't login using my user name, but only as guest. When I finally make it into Guest User, it takes forever to load anything and everything. I want to know if I can still retrieve my pictures. I tried going thru iPhoto under guest user and importing the pictures. However, a red exit sign appears on all the files under that username. Please help ;(
Hi rosaqt,
I see that you are having some issues with your ability to log in to your user account on your computer. If this issue is related to passwords, you will want to see the information in the following article:
OS X Mavericks: If you forget your login password
http://support.apple.com/kb/PH14120
However, if this issue is unrelated to your password for your user account, you may need to provide more information in order for me to properly assist you. In the mean time, you may wish to boot into Safe Mode to see if that affects your ability to log in to your user account:
OS X: What is Safe Boot, Safe Mode? - Apple Support
http://support.apple.com/en-us/HT201262
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Can't login to Skype with Microsoft account
Hello!
My problem is I can't login to Skype (website and program both) with Microsoft account. When I try to login to Skype on website, it says: There is a problem signing in with Microsoft account. Please try again or sign in with Skype details instead.
Please help me, I tried so many things and nothing works...And me. And I tried to reset my password by getting the "password token" emailed to me. Once received I clicked on the link to reset my password and it told me that my "password token wasn't recognized" and to enter it manually. I did that, going as far as to cut and paste the token, and it wasn't "recognized" again.
And when I was able to sign in, I couldn't get any new contacts, even though I knew they were presently signed in.
Bring back Windows Live!
Maybe you are looking for
-
I want to change the security answers on my account but have noticed that the email address I listed is a hotmail one which I cannot get into. How do I change this as I only see an edit button for logging into iTunes but not one where I can change i
-
Sender Mail Adapter - CC list limitation
Hi All, Is there a way to receive the CC list in the MailPackage in stead of receiving it in the message Header? If the above is possible, please specify the sender mail channel configurations required and the changes required to the standard SAP Mai
-
Error Message: Could not read this files because the plugin could not recognise the file
It wont let me open a file I saved yesterday? What does this error message mean & how do I fix it?
-
Can no longer create custom page size for printing to PDF?
When printing from FrameMaker to PDF in Windows, I used to be able to create a custom page size by clicking on the Add button that appeared to the right of the Adobe PDF Page Size window, in the Adobe PDF Document Properties dialog box. With Frame 9,
-
Hi, I already installed Adobe Download Assistant program into my computer. The Adobe Download Assistant window shows up but it is blank. It does not have the Photoshop products I need to download. I signed in with my Adobe ID, and it is still blank.