Can't login to router web interface anymore (Authentication Required fails)
After upgrading to Firefox 9.0.1 (or another recent version), I can't login to the web interface of my router anymore, even though I can login with other browsers.
I've tried to login to 192.168.1.1 using Firefox 9.0.1 and my saved credentials (admin/********), but the authentication pop-up just showed up again. The same thing happened when I manually entered the same information. Using safe mode and/or private browsing didn't help either.
To be sure that is was a problem with the Firefox browser, I wrote the address, login and password in a text file, then copied-&-pasted the information into both Firefox and Google Chrome. The result: after repeating this a couple of times, it always worked on Chrome and never on Firefox.
The login process used to work flawlessly with previous versions of the browser, but I'm not sure if the problem appeared on 9.0.1 or the version before.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Similar Messages
-
Sun x4170 ILOM - Can't get to the web interface 2 days after password reset
Just bought a used x4170. I was able to get iLOM on the network and get to the web interface logon screen after setting the IP for it.
I tried logging on but the password was not given to me. So I connected to the serial interface (rj45) from another machine and used putty to connect. Got to the preboot point and was able to reset the password to default, Rebooted.
I was then able to log into iLOM. That was 2 days ago. Today for some reason, I can't get into iLOM. It pings but I can't get to the web interface. I get the IE error "cannot connect" or unable to connect or something like that.
I'm completely new to this brand of server so consider me completely ignorant on all aspects of the hardware.......lol
ThanksHello
By default, you connect to the server’s service processor (SP) using the out-of-band network management port (NET MGT). The ILOM sideband management feature enables you to select either the NET MGT port or one of the server’s Gigabit Ethernet ports (NET 0, 1, 2, 3), which are in-band ports, to send and receive ILOM commands to and from the server SP. In-band ports are also called sideband ports.
You can refer more here : https://docs.oracle.com/cd/E19269-01/820-7959-11/820-7959-11.pdf
If you want to use the NET MGT port of ILOM, then your output should display similar to below
-> show /SP/network
/SP/network
Targets:
interconnect
ipv6
test
Properties:
commitpending = (Cannot show property)
dhcp_clientid = none
dhcp_server_ip = xxxxxxxxx
ipaddress = xxxxxxxxx
ipdiscovery = dhcp
ipgateway = xxxxxxxxx
ipnetmask = xxxxxxxxx
macaddress = 00:10:E0:65:2F:20
managementport = MGMT <<<<<<<<<<<<<<
outofbandmacaddress = 00:10:E0:65:2F:20
pendingipaddress = xxxxxxxxx
pendingipdiscovery = dhcp
pendingipgateway = xxxxxxxxx
pendingipnetmask = xxxxxxxxx
pendingmanagementport = MGMT <<<<<<<<<<<<
pendingvlan_id = (none)
sidebandmacaddress = 00:10:E0:65:2F:21
state = enabled
vlan_id = (none)
Hope this helps.
Best Regards
Bhavyesh -
I can't login to facetime or imessage anymore...
When i try to login it says my password aint right.. But i can still use the password to login here with my apple id?IMessage is down. Who knows when it will be back. Going on five hour now
-
Hi everyone.
I have some problem with DMM.(Version 5.2.2)
Sometimes, I can't login on DMM web based and receive error "Authentication fail". I'm sure that username and password is corrected.
And I try login again after rebooting the DMM server, it works correctly.
Did anyone have some problem with me? And how to fix this problem. Please give me some advise.
Kind regards,
Thanks all!It seems that your Spotify for Mac client may just be feeling a bit poorly. Try re-installing Spotify for Mac, this might help. You can find instructions at: https://support.spotify.com/uk/learn-more/faq/#!/article/reinstallation-of-spotify If you've tried a re-install and it just doesn't work, if you're remembered on Facebook when you're redirected to Chrome, log out and try again. If you're not remembered, get Facebook to remember you in Chrome and try. My last suggestion is to change your default web browser, because it might just be a problem with Chrome. Once you're in, you should be okay and can use the following instructions to also change your default browser back again: https://support.apple.com/en-gb/HT201607 If none of these work, please contact Spotify on: https://support.spotify.com/uk/contact-spotify-support/ if you're a Premium customer or need your tunes on your Mac! If you're Premium, you need the service you paid for, and nobody should have to live without their music! Good luck and let me know how it goes. Did you know there's also a bunch of other helpful community members like me ready to help you? But this forum isn't just for help, look elsewhere on the community and you can have a chin-wag about the latest music you're loving on Spotify right now. Cheers!
-
I can no longer login to my router web interface from Safari on iPad.
I made a mistake today. After accidentally opening up the web interface login screen to my router in Safari, I just pressed cancel in the login box. Since then, Safari just hangs on 192.168.0.1 when I want to access the router and the login box no longer appears. I can still login via the Terra browser on the same iPad. I would really appreciate any guidance as to how to undo whatever setting I have changed. I have tried clearing cache/cookies/history. Thanks.
Edit: Could I have refused a permission to access in some way? I am now wondering if in my haste, I may have mistaken a permission box for the login box. Is there somewhere in the settings I could check if I have refused a permission? Thanks again.there should be an X on the right side of each tab. clicking on it should close that tab
-
Cisco ASA 5505 - Can't Login from Public & Local IP Anymore!
Hello,
We've a Cisco ASA 5505 connected directly to Verizon FiOS Circuit (ONT) box using Ethernet cable. As per the existing documention that I have, the previous configured this as a dedicated router to establish a seperate VPN connection our software provider. They assigned both Public Static and Local Static IP address. When I try to ping the public IP address, it says request time out; so the public IP address is no longer working.
When I ping the local IP address of 192.168.100.11, it responds. The SolarWind tool also shows Always UP signal. How can I login into this router either from remotely or locally to check the configuration, backup and do the fimrware upgrade?
I also tried to connect my laptop directly to the ASA 5505 router LAN port. After 3 minutes, I'm able to connect to Internet without any issues. However I don't know the IP address to use to login.
Any advice would be greatly appreciated. Thank you.
UPDATE: I'm able to find the way! I need to use https to login! I'm able to download ASDM tool and login! Thanks to these resources:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml
http://cyruslab.wordpress.com/2010/09/09/how-to-download-asdm-from-asa5505-and-install-it/Hi Srinath,
If that ASA5505 has factory-default configuration on it , then it probably has 192.168.1.1 ip address on the LAN side and has got dhcp server turned on to provide you ip address dynamically the moment you hook up a machine to it directly or through a switch.
If you've access to ASDM.
You can go the Configuration Tab>>Device Management>>Device Access and turn on the SSH & Telnet from the LAN interface because by default only HTTPS/ASDM is enabled on LAN interface.
You will still need to generate crypto keys and create a username in order to get ssh working
For this you can click at the TOP at TOOLS>> Command Line Interface.
And in the box below type this
crypto key generate rsa modulus 1024
add a username
username <> password <> priv 15
and enable aaa authentication for ssh like this
aaa authentication ssh console LOCAL
Let me know if this helps.
Puneet -
Net down, can't login to router, lights normal on 2nd pc (1st works fine)
I have had a PC installed with FIOS and working perfectly (wire connection, windows xp, m1424-wr router). I have brought in a newer upgrade PC tower (vista 64 home) that has had internet working fine just recently, but cannot get it to work with FIOS and my router. I do not run both PC's at once, just one at a time and will replace the other one once this is setup (one monitor). I have an IP address assigned and packets are sent and received, but I cannot access the web or even login to my router (manually or using FIOS's wizard software). It is set to auto obtain an address and DNS. I can log into the router on the old computer that works, and using the same login/password combo on the 2nd computer it fails. I am using the same cable, and all lights on the router and the pc NIC are on. Safe mode with networking provides no change
Any ideas what the problem is? The computer has been working on another network just fine a day before I tried setting it up at a new location with FIOS, but it seems like it is rejecting the connection somehow.
Message Edited by Jay814 on 08-01-2009 08:52 AMI have an IP address assigned and packets are sent and received, but I cannot access the web or even login to my router (manually or using FIOS's wizard software). It is set to auto obtain an address and DNS. I can log into the router on the old computer that works, and using the same login/password combo on the 2nd computer it fails. I am using the same cable, and all lights on the router and the pc NIC are on. Safe mode with networking provides no change
This is an interesting one. Let me see if I understand your post correctly. You see that the new computer is assigned a proper address on the network, and you are able to view the router login page from the new computer. However, entering the router logn/password from the new computer fails to access the router, and you do not have access to the internet. Is that correct?
If so, when you try logging in to the router from the new PC, how exactly does it fail? What is displayed on your screen? -
After a while, WRT54G won't allow me into web interface anymore.
I can get into the web interface shortly after powering on the router. But after several hours, or days, I no longer can access it. The internet and network continue to work, I just can't access the settings page (I get something like "page cannot be displayed" in all browsers).
If I unplug the router and plug it back in, I can get into the settings page again.
What might cause this? Would it be fixed if I upgrade the firmware?Hi. I think people are misunderstanding my issue. That'smy fault, as I didn't report the error accurately. The error is actually an "Empty server response", not a 404 page not found. So it's talking to the router, but getting nothing back.
I understand wired connections are not subject to interference, the way wireless ones are.
However a wired connection for this PC is not feasible without bashing holes in the wall,
and anyway I can see no reason why I can't do this wirelessly (even if there's some risk of interference).
Some people seem to be implying this is "By design" and you're expected to access the settings page only via a wire, and it's perfectly normal to require a reboot before being allowed into it. I don't buy that. I've used other routers where I can access the settings wirelessly every time, even if it hasn't been rebooted in a long time.
What I'm getting at is this: the current issue has nothing to do with interference, if it were interference then I could get on after several attempts. Or if the interference is so strong that I can't connect even after trying for hours... then a simple reboot would not fix it. But a reboot does fix it, which tells me the router seems to be holding on to some info or setting that prevents my PC from accessing it. When I reboot, it loses or changes that info/setting. I'm just curious what it might be.
If the bottom line is "your router is old and sucks, replace it" then I can certainly just do that. I'd just like to know that the new one will not have this problem. -
EA6900 - Upgraded to latest firmware now can't login to router
Upgraded EA6900 to latest firmware (11629 I believe). Now unable to login to router using either mylocal.router or linksyssmartwifi.com. Continues to pop up message that setup not complete. I repeat the steps to reset the router to factory settings and end up in same spot. I've tried the procedure connected wired to the router and wirelss to the router. I can login to router using smartwifi app on iPad however. Wireless connection still works as devices can connect. I'm stumbed.
Try clearing you browser's history and temporary files. Also restart the computer just in case.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
Wrt600n still can't login to router after factory reset
Ok, so I reset the router but i still can't login to the setup using the factory password (admin/admin) (blank/admin) (admin/blank). Now I have an unencrypted network and no access to the setup... I even tried using the setup CD but it doesn't recognize the router. Anyone have this problem or know of a possible fix?
thanks, Carl
Solved!
Go to Solution.Its a very common problem. Generally peoples push reset button 10-15 sec for reset that it not good enough to return your router to factory setting. So hold the Cisoc Linksys wrt600n reset button this time at least 30-40 second. And try now for a new setting.
I hope, it helps.
Thanks,
Rich
Ask any question related with Cisco/Linksys......
I am always available on this Cisco Community for help
Mod Note: Link to 3rd party support removed. -
How can I find out the web interface a module function is executed from?
Hello all,
I was wondering if anybody knows how would be possible de determine the web interface a function is being launched from, within the function.
I've got this function that is used for a exit variable that updates the variable value depending on another variable in a web interface. The thing is that this very same function and variable will be used in many web interfaces and the "source" variable will be different for each mask.
So, for example, mask 1 will have variable 1 as a selector variable and variable X will be updated by it. Then I also have variable 2 in mask 2 as a selector variable and variable X will be updated by it as well.
I want to develop a code, within the function module, that depending on the web interface that is calling it, it will use a source the correct variable and for this I need to know which web interface is calling the function.
I hope to have been able to explain myself clearly. It's a purely technical question.
Thanks in advance.
Best regards.Hi Francesco,
Are you talking about that ??? )) It will explain you about to get the name of the web page when you are executing an abap function for determining the values of variables...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20make%20a%20variable%20even%20more%20flexible%20in%20bw-bps.pdf">How to make a variable even more flexible in BW-BPS?</a>
This is weird: I wrote that document a few weeks ago, it is theorically published on SDN but this is not possible to find it by using the research tool... Maybe because it applies only to BPS in 3.5. I did not have enough time to migrate that solution to BI-IP 7.0.
Regards
Laurent -
Accessing router web interface
Is it possible to access the web interface from while connected to the guest ssid?
No. Guest network is separate from the main network.
-
Hii frnds,
here is the configuration in my router C1841..for the cisco ipsec remote access vpn..i was able to establish a vpn session properly...but there after i can only reach up to the inside interfaces of the router..but not to the lan devices...
Below is the out put from the router
r1#sh run
Building configuration...
Current configuration : 3488 bytes
! Last configuration change at 20:07:20 UTC Tue Apr 23 2013 by ramana
! NVRAM config last updated at 11:53:16 UTC Sun Apr 21 2013 by ramana
version 15.1
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname r1
boot-start-marker
boot-end-marker
enable secret 5 $1$6RzF$L6.zOaswedwOESNpkY0Gb.
aaa new-model
aaa authentication login local-console local
aaa authentication login userauth local
aaa authorization network groupauth local
aaa session-id common
dot11 syslog
ip source-route
ip cef
ip domain name r1.com
multilink bundle-name authenticated
license udi pid CISCO1841 sn FHK145171DM
username ramana privilege 15 secret 5 $1$UE7J$u9nuCPGaAasL/k7CxtNMj.
username giet privilege 15 secret 5 $1$esE5$FD9vbBwTgHERdRSRod7oD.
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group ra-vpn
key xxxxxx
domain r1.com
pool vpn-pool
acl 150
save-password
include-local-lan
max-users 10
crypto ipsec transform-set my-vpn esp-3des esp-md5-hmac
crypto dynamic-map RA 1
set transform-set my-vpn
reverse-route
crypto map ra-vpn client authentication list userauth
crypto map ra-vpn isakmp authorization list groupauth
crypto map ra-vpn client configuration address respond
crypto map ra-vpn 1 ipsec-isakmp dynamic RA
interface Loopback0
ip address 10.2.2.2 255.255.255.255
interface FastEthernet0/0
bandwidth 8000000
ip address 117.239.xx.xx 255.255.255.240
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map ra-vpn
interface FastEthernet0/1
description $ES_LAN$
ip address 192.168.10.252 255.255.255.0 secondary
ip address 10.10.10.1 255.255.252.0 secondary
ip address 172.16.0.1 255.255.252.0 secondary
ip address 10.10.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpn-pool 172.18.1.1 172.18.1.100
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip dns server
ip nat pool INTERNETPOOL 117.239.xx.xx 117.239.xx.xx netmask 255.255.255.240
ip nat inside source list 100 pool INTERNETPOOL overload
ip route 0.0.0.0 0.0.0.0 117.239.xx.xx
access-list 100 permit ip 10.10.7.0 0.0.0.255 any
access-list 100 permit ip 10.10.10.0 0.0.1.255 any
access-list 100 permit ip 172.16.0.0 0.0.3.255 any
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 150 permit ip 10.10.7.0 0.0.0.255 172.18.0.0 0.0.255.255
access-list 150 permit ip host 10.2.2.2 172.18.1.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 172.18.1.0 0.0.0.255
control-plane
line con 0
login authentication local-console
line aux 0
line vty 0 4
login authentication local-console
transport input telnet ssh
scheduler allocate 20000 1000
end
r1>sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 117.239.xx.xx to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 117.239.xx.xx
10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
C 10.2.2.2/32 is directly connected, Loopback0
C 10.10.7.0/24 is directly connected, FastEthernet0/1
L 10.10.7.1/32 is directly connected, FastEthernet0/1
C 10.10.8.0/22 is directly connected, FastEthernet0/1
L 10.10.10.1/32 is directly connected, FastEthernet0/1
117.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 117.239.xx.xx/28 is directly connected, FastEthernet0/0
L 117.239.xx.xx/32 is directly connected, FastEthernet0/0
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.0.0/22 is directly connected, FastEthernet0/1
L 172.16.0.1/32 is directly connected, FastEthernet0/1
172.18.0.0/32 is subnetted, 1 subnets
S 172.18.1.39 [1/0] via 49.206.59.86, FastEthernet0/0
192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.10.0/24 is directly connected, FastEthernet0/1
L 192.168.10.252/32 is directly connected, FastEthernet0/1
r1#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
117.239.xx.xx 49.206.59.86 QM_IDLE 1043 ACTIVE
IPv6 Crypto ISAKMP SA
r1 #sh crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: giet-vpn, local addr 117.239.xx.xx
protected vrf: (none)
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (172.18.1.39/255.255.255.255/0/0)
current_peer 49.206.59.86 port 50083
PERMIT, flags={}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 2, #pkts decrypt: 2, #pkts verify: 2
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
local crypto endpt.: 117.239.xx.xx, remote crypto endpt.: 49.206.xx.xx
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0x550E70F9(1427009785)
PFS (Y/N): N, DH group: none
inbound esp sas:
spi: 0x5668C75(90606709)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2089, flow_id: FPGA:89, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550169/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x550E70F9(1427009785)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2090, flow_id: FPGA:90, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550170/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:hi Maximilian Schojohann..
First i would like to Thank you for showing interest in solving my issue...After some research i found that desabling the " IP CEF" will solve the issue...when i desable i was able to communicate success fully with the router lan..But when i desable " IP CEF " Router cpu processer goes to 99% and hangs...
In the output of " sh process cpu" it shows 65% of utilization from "IP INPUT"
so plz give me an alternate solution ....thanks in advance.... -
Can't Login to Embedded Web Server for HP Officejet Pro 8600 N911g
I have a HP Officejet Pro 8600 N911g that I am trying to access in order to update the adress book for the scanner but in order to do that I must login. I have never set up a user name or password for it. Is there a default username and password?
Hello @jessescopely,
Welcome back to the HP forums.
I understand that when you try to access the EWS (Embedded Web Server) for your Officejet pro 8600, you are prompted for a username and password.
Unfortunately there is no default username or password.
On rare occasions this can be fixed by restoring the network defaults.
Go into the Setup menu.
Select the Network sub menu.
Choose Restore Network Defaults.
I have also sent you via private message the steps to reset your printer back to factory defaults.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
If neither of those clear the password, please call our technical support at 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping! -
Fresh install: can't login with user to tty anymore, root works ok.
Hi!
I'm new to Arch. I decided to try it so I installed the i686 core image in Virtualbox 4.0.12
under Ubuntu 11.04, with no issues, following both the official install guide and the beginners' guide.
After performing the complete upgrade step, I created a first user (david) with
the default configuration as shown in the guide, and added it to the wheel group.
As can be seen in the file /var/log/auth.log (http://pastebin.com/bkTLuJrz),
I logged in to the new user account shortly after its creation (13:19:33). This worked fine.
After logging off about two minutes later, and trying to log in once more, I found I was no
longer able to gain access. Every next try ended in an automatic logoff 2 or 3 seconds
after inserting the correct password, as can be seen starting from 13:29:41.
No message appeared in auth.log or on screen, and I have been unable to find any sort
of printed hints with a reason in other log files.
I have had no problems logging in as root, besides what seems a possibly similar situation
as seen at 13:30:36 (I don't remember, it could have been a quit test followed by a quick logoff via ctrl-D).
I tried this solution https://bbs.archlinux.org/viewtopic.php?id=122348
(they suggest the disk may be full), but that's not my case. Here is the result of "df -h":
http://pastebin.com/dKHnW91R
I then tried alternatively adding these lines (only one per try) at the end of
the /etc/security/access.conf file.
+ : david : tty2
+ : (wheel) : LOCAL
I tried logging in to tty2 with the first one, naturally. No success in either case.
Then, I created a new user with the same default options as the first one, but I could never log in,
I was again being thrown out just after inserting the password.
I also tried changing the user passwords, and deleting the .bash* files in /home/david.
Putting a short message to show at login using echo in the last line of /home/david/.bashrc
(the default one created by Arch) succeeded in showing it just before the log off.
Entering to fallback mode made no difference, and trying to log in with only one (different)
account at a time doesn't change anything either. Same trying other tty terminals.
Just to be very clear, I haven't installed X nor sound support.
And just in case (although I suspect it's totally irrelevant for this issue), on boot I'm getting a
message saying my network settings are deprecated, and that I have to check rc.conf.
I don't know what else I could try. Any hints?
EDIT: I ran grep -E " 13:[12][0-9]" /var/log/* to see the lines of the logs, in the range of time
when things got weird, in case I could find any hint of time-correlated stuff:
http://pastebin.com/fTakKwrY
I installed bash-completion. I tried removing it, but the problem persists.
pacman -Qdt throws:
linux--atm 2.5.1-2
sqlite3 3.7.7.1-1
Some other relevant files:
/etc/inittab
http://pastebin.com/x0S5huRp
/etc/passwd
http://pastebin.com/TFWrcFvd
/etc/group
http://pastebin.com/gwd4Zwwc
/etc/shadow (with some modified data in case it's somewhat sensitive)
http://pastebin.com/eh1Te3LB
/etc/security/access.conf
http://pastebin.com/LRks1KET
/etc/sudoers
http://pastebin.com/KiWdqg9P
I have 1893 MB of base memory and 128 MB of video memory dedicated to the Arch virtual machine.
Last edited by radioboy (2011-08-06 00:42:53)ewaller wrote:
Welcome to Arch; and a thanks for a reasonable first post -- it most definitely shows the initiative of an arch user. As a moderator, good job.
Let's look at some of the basic stuff...
Could you post the output of mount ??
As root, what happens if you try ls -la /home/david
As root, what happens if you try su david
If that works, what happens if you then try cd followed by ls -la ??
Thanks a lot!
su david didn't work, I was sent back to root as if I had only typed the enter key.
However, when I wanted to do the same in an Ubuntu console in order to check something
for a comparison, I discovered something fascinating:
I can no longer log in using *any* console, using gnome-terminal or any tty in Ubuntu!
So I think I'll be back when I get this sorted in the first place, but I will be checking here
just in case someone has some cross-distribution general advice on this issue.
Last edited by radioboy (2011-08-06 01:46:40)
Maybe you are looking for
-
Best Practice Agregate Tables for agregate awarness ..
Hello, the question i m facing now is how to improve performance trough agregate awarness. How to plan the agregate tables in order to get the best covering for reporting requirments ? How to realize maximum use of agregate tables and minimum use of
-
Initial Load Performance Decrease
Hi colleagues, We noticed a huge decrease initial load performance after installing an application in the PDA. Our first test we downloaded one data object with nearly 6.6Mb that corresponds to 30.000 registries with eight fields each. Initial Load t
-
Flicker on Dragon Sensor R3Ds - pulldown bug?
Since upgrading our RED camera to the Dragon sensor, we've been noticing a strange bug. R3Ds that were shot at 23.98 fps that are put on a 29.97 fps sequence (or exported from a 23.98 fps sequence to a 29.97 fps file) are having something wonky occu
-
Probebly simple but frustrating problem
Hi, Ok basically im trying to set up a vector of objects and a way to search through them by members surnames (or anthing else). However i keep getting this error (prolly something simple) Thank you very much C:\rental.java:268: cannot find symbol sy
-
Need help buying modestly priced mac that will run CS6
I work as the Communications Director at a very small veterans service non-profit with limited resources. I am not a graphic designer, but since we are very small all of the design projects fall on me being that I am in charge of creating all of our