Can't modify iCal after ios5

When I try to modify entries in iCal on my iPad I can't

I appears that the bug is related to the amount of texts you have stored in the phone. My wife had nearly 63,000 texts (you can see the total amount by using Phone View). We did use the program to backup all her texts, but I don't think you absolutely need to do that.
If you're having the same issue, I suggest deleting texts from the people you correspond with all the time. For instance, my wife had one person who, when we deleted her text thread, took almost 5 minutes to delete (the phone hangs when it is deleting a lot of texts). We got her down to about 28,000 text messages and she now can send and receive with no problem.
Again, I think this is an iOS 5 bug due to all of the underlying changes in the operating system. They probably didn't forsee this issue (for some reason). But I'm sure it will get worked out in a future update. Until then, you'll probably just need to delete conversations tha aren't that important.
Hope this helps.

Similar Messages

  • I can't open iCal after updating Mountain Lion

    After updating Mountain Lion, I can't open iCal. It keeps reopening and sending report to Apple if I press restart.
    What can I do?

    Welcome to Apple Support Communities
    Open Finder and delete:
    ~/Library/Caches/com.apple.iCal
    ~/Library/Preferences/com.apple.iCal.plist
    If it doesn't help, press Command and R keys in boot and reinstall OS X

  • Can't open apps after iOS5.0 update

    I updated my iphone a couple of days ago and my phone says  I have iOS5.0. Unfortunately, no of my apps will open now. I can make and receive calls, text, but nothing else. Any ideas?

    Try downloading any free app to resync your iTunes account.

  • Can't recover 3GS after IOS5 upgrade attempt - phone no longer seen in iTunes

    Tried upgrade on 3GS to IOS5, got msg that iTunes detected phone in recovery mode and I must restore. iTunes no longer sees the phone so restore doesn't work. Win XP sees the phone driver when I connect the phone, and driver says it is working properly. Have went through the entire support topic "iPhone not appearing in iTunes" and found no problem.  Rebooted computer 3 times and tried all USB ports -  iTunes still doesn't see the phone. Any ideas on how to recover this phone?

    my problem occurred when I upgraded to IOS5 on my iPhone 4.  I received an unable to sync message that indicated that there was no space left on my iPhone; and a "Other" Capacity indicator appeared on the bottom of the iPhone device sync screen (in yellow color) and noted an overage of 12GB!  Ofcourse, prior to the upgrade I actually had 6GB free on my 32GB iPhone.  So, there is a bug.  The following link indicates a few solutions and hopefully it will answer your concern.  The link is http://support.apple.com/kb/TS1503
    However, I had to restore as the first two solutions didn't work.  Furthermore, about 3.3GB of "Other" remains while I synced up.  Clearly, the problem has not been resolved.  Apple owes me and you community members a patch to fix this bug.  Basically, I have spent about two hours fixing this and I still cannot use 3.3GB of my iPhone space.

  • Can't sync contacts after ios5 upgrade. Error message saying iPhone is using contacts, but there are none showing. Any ideas please?

    I can't click on the mail, contacts calender option in settings as it crashes out so can't change any settings there

    did you ever get this fixed, please let me know because I have the same issue

  • After ios5 my camara app doesnt work what can i do?, After ios5 my camara app doesnt work what can i do?

    My camara app is not woking after ios5

    Try closing the Camera app completely and then see if it works when you re-open it : from the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • After ios5 update, iCal week view Oct 2-8 has 2 Saturdays?

    Is anyone else having problems with iCal week view on iPad after ios5 update?
    Two major changes have occurred...
    1. Week view used to start on Monday, now Sunday (and can't change it back).
    2. If you look at the week October 2-8, 2011 there are 2 Saturdays and no Friday or following Saturday...
    Any ideas? Is this a wait for ios5.1 issue?
    Cheers
    Chris

    If you are using a Mac, go to Settings>Software Update ... check for any updates, and update all.
    Chances are you are not using iTunes 10.5, which is required to sync iOS 5.
    If youare using a PC, suggest you uninstall your iTunes, download fresh iTunes 10.5 from Apple.com/itunes and install it.

  • I would like to inquire about the schedule that is synchronized to iCal in CalDav protocol from our system. Schedule that is synchronized could be edited from the iPad or iPhone terminal, but I can no longer edit from iOS5.1. Can you tell me some tips?

      I would like to inquire about the schedule that is synchronized to iCal in CalDav protocol from our system. Schedule that is synchronized could be edited from the iPad or iPhone terminal, but I can no longer edit from iOS5.1. We did not fix anything program itself, but the data format to be synchronized is the same. Can you tell me some tips?

      I would like to inquire about the schedule that is synchronized to iCal in CalDav protocol from our system. Schedule that is synchronized could be edited from the iPad or iPhone terminal, but I can no longer edit from iOS5.1. We did not fix anything program itself, but the data format to be synchronized is the same. Can you tell me some tips?

  • Can't open iCal on IMac (early 2009) after upgrade to Mountain Lion

    Can't open iCal on IMac (early 2009) after upgrade to Mountain Lion.
    Tried opening it multiple ways.
    Nothing works.

    bfackler,
    The iCal application in Mountain Lion has been replaced by "Calendar."
    Can you open "Calendar?"

  • After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting new glasses!! Also the backlight on the iPad isn't as bright as before. Any ideas?

    After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting a new pair of glasses! Also, the backlight on the iPad isn't as bright as before the upgrade, any ideas?

    Hi Zak, thanks for the reply.
    The filename is whatever is set to be the background fill of the site (I presume the desktop background fill, if mobile versions are set to be different). I've tried a number of different files, sizes and types/formats and the result is still the same, so as far as I can tell it's not the file itself causing the issue...
    It uploads all pages (desktop, tablet and phone versions), .css files and .html files, and even the favicon .ico file but then hangs on the first image file, which incidentally is the background fill image.
    The total number of files is said to be 154. It gets stuck on file number 24.
    Yes the "Resume" dialog appears and upon clicking it just attempts to continue from the hang at the first image file (apparently 66% of the way through).
    Re: the "BC site has changed" part - I thought as much but figured worth reporting.
    ... Incidentally, as I've written this reply, I left the "Resume" dialog open (ie neither clicking "resume" or "cancel" and just as I've finished typing it appears to have published the site successfully?!! (I must've left it for roughly 5 minutes)
    Bizarre behaviour... I'm not sure if this will repeat itself with other sites but I'm sure there's a bug here that needs looking at regardless...?!
    Any thoughts?

  • How can I restore iCal using the calendars on my iPhone

    I recently purchased a new iPhone and decided that this was maybe the time I should sign up for iCloud. What resulted was nothing short of havoc. Duplicate calendars, contacts, reminders, you name it, a giant mess. In the process of getting this all cleaned up I  have accidentally erased some of the many duplicates flying back and forth with my original data on it. I am now left with an iPhone that still has all my calendars, dates and reminders, but my iPad and, more importantly, my desk computer are left without anything at all.
    I tried to synch with iTunes, but that didn't help. The only way I can get an event back on to my desk computer is if I edit on my iPhone and then it is obviously pushed back to the computer. I tried restoring the Library/Calendars file with Time Machine just to get back to 6 hours ago. Nothing doing. iCal remains as empty as it was before. But it now has three Calendars files all with different time stamps.
    Is there a way that I can push all iCal data back to my desk computer via iCloud?
    I am doubly frustrated with this as I rely on my calendar to bill my customers the hours I write into the calendar after I've been with them, plus I seem to have exchanged the safe, if a bit cumbersome, synching via iTunes with something that is not up to par.
    Can anybody help me out of my predicament? I am terribly grateful for any suggestions
    Tom

    Hi, On both of your devices, go onto Settings>iCloud> Calanders [On]
    You need to make sure your signed into the same iCloud account though!

  • Duplicated events on iCal after .mac sync

    Thre facts:
    I have a TREO600, a desktop mac, and a powerbook, both running Tiger 10.4.4.
    Due to some other problems with syncing the TREO, I have purchased the Missing Sync from MarkSpace, and that works very well to sync the palm with the desktop.
    I started syncing my two computers with .mac lately, and I have nothing but trouble. Nearly every sync throws up some conflicts, often about events that have long passed. I went through the long list of conflicts EVERY time this happens, but iSync seems to complain about new conflict nearly everytime I sync.
    Moreover, it seems to duplicate certain (but not all) events on my iCal after it has synced with .mac.
    This is super annoying. I have seen that there are many different posts on duplication already, but none of them seem to match my problem, though there definetly seems to be a general problem with iSync not being very good at checking for duplicates.
    Any ideas how to solve this?
    thanks,
    marc

    Because you are running the Missing Sync for Palm OS in a Mac OS X 10.4 or later environment, the synchronization of your data is a separate process controlled by .Mac Sync. In order to correct the issue, you should perform a reset, replacing all of the records on .Mac with the records from iCal and the Address Book, which should, incidently, be contemporaneous with your Treo 600 smartphone.
    To do that, launch System Preferences and select the .Mac pane. Press the Advanced tab, then the Reset Sync Data… button in the lower left corner of the dialog box. Reserve the default directional data transfer from .Mac to your machine by pressing the right-facing arrow beneath the .Mac icon. This will shift directional flow so that data moves from your computer to the .Mac servers. You can keep the Replace: All Sync Data value in the drop-down menu above, or choose to synchronize only one data type [Calendars or Contacts] by selecting the appropriate value. If you synchronize them separately, you must repeat this process for the other data type.
    This event will transfer a complete set of records from iCal and the Address Book to the appropriate storage locations on the .Mac servers, replacing the non-matching data currently stored there. It will not affect your continued use of the Mark/Space Contacts, Events and Tasks menu, and will not change the data stored on your handheld the next time you synchronize.

  • Can't modify time in flash player 9?

    Hi guys, I want use flash for my device GUI.when I install flash player 9 in ubuntu yesterday, I found can not modify system time, I use system cmd change the time to before ,like 10:00 AM change to 09:50 AM,the flash GUI is stop and after 10 minute will go on.
    Anybody can give me some advise?Thanks!

    Would you mind reposting this question over on the Flash Professional forums?  This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience.

  • Can't modify Outbound Connection Pools properties in WebLogic 10.3.6

    I'm trying to configure BAM adapter in WebLogic Administration Console. Navigate to deployments -> OracleBamAdapter -> Configuration -> Outbound Connection Pools -> eis/bam/rmi -> tried to enter property value of Hostname but I couldn't. It is not in edit mode - no check box in front of Hostname column. I tried to enter the value in the hostname property and save but nothing was saved.
    I've unlocked domain configuration lock and I see the <lock & edit> button is disabled and <release configuration> button is enabled in the change center. So why can I modify the property value?
    WebLogic 10.3.6
    SOA 11.1.1.6
    BAM
    All are installed in the same server and SOA is installed with development mode. I didn't bounce the admin server after unlocking the domain configuration, is this required?

    Thanks, Arik. I just figured it out and was banging my head against the wall when you posted the message. :-) Thanks for the reply!

  • [CS3 | JS] Can't modify geometricBounds of object

    Okay, I've built some very complex scripts in VB but I'm now working on my Thesis on a Mac and trying to script in JS and some things I probably shouldn't be having problems with, I am.
    Like this one: I can't modify (or even read) the geometricBounds of a placed graphic. Here are the lines that are applicable:
    var myGraphic = myPage.place(File(myFileList[myKeyFile]),[0,0]);
    var myBounds = myGraphic.geometricBounds;  (this gives me an error of Undefined)
    When I use the Extendscript toolkit's Data Browser to twirl down myGraphic when at a breakpoint on the second line, it says myGraphic = [object PDF] and has attributes of concat(), Array(), hasOwnProperty(), and many others, none of which seem to be attributes of graphics. Nothing familiar.
    What am I doing wrong?

    Placed graphics are arrays. So after
    var myGraphic = myPage.place(File(myFileList[myKeyFile]),[0,0]);
    you have a one-element array myGraphic. The graphic itself is myGraphic[0]
    To set the geometric bounds, you need to address the graphic's containing rectangle, in other words, its parent:
    var myBounds = myGraphic[0].parent.geometricBounds;
    Peter

Maybe you are looking for