Can't mount movie DVDs after Security Update 2006-002

I installed Security Update 2006-002 today after all the preparation recommended by MacFixit. Everything came up fine, EXCEPT:
Movie DVDs (e.g., as rented from Blockbuster) no longer mount.
Yesterday, there was no problem.
Dual G5 2.5 GHz Mac OS X (10.4.5)

The following link describes MacFixit's recommendation for installation of 10.4.6, but it is basically the same recommendation as they have given for quite a while for any significant system update, including security updates:
http://www.macfixit.com/index.php?date=2006-04-03
Scroll down until you see "Update process recommendation".
In my case, I had followed the "more cautious route" of this procedure but still had a problem, and then the problem went away when I did a (presumably extra) pre-binding.
For system-wide updates (that is, 10.4.x -> 10.4.(x+1)) I've always used combo updaters rather than the supposedly specific-and-therefore-smaller updaters when updating the system. For the security update in question here, I downloaded the updater from the Apple site rather than use Software Update.
Hope this helps.
Dual G5 2.5 GHz Mac OS X (10.4.5)

Similar Messages

Address Book & Mail crash after Security Update 2006 002 1.1

hello,
I recently installed Security Update 2006 002 v1.1 on my iBook G4 and since then Address Book has crashed on launch (also when launching from the Dashboard and from within Mail), and Mail now crashes when pasting text into a new message. I tried repairing permissions with Disk Utility and checking the locations of the apps. So far, nothing's helped.
I've read similar problems on the discussions but haven't found any solutions. If I've missed something, please pass me a link - if not, any ideas?
thank you
scott

Scott:
The best way to preserve your data, preferences and settings it to do an Archive and Install. When you use that method the installer places your User Folder with the data etc. in a Previous Systems Folder and you retrieve them following the installation. Of course, before any major operation like that it is wise to backup those things, anyway, just in case something goes wrong.
Here are some suggestions on installation:
Tiger: Archive and Install (with a Clean Install Option)
If you have the Full Retail Version of Tiger (computer specific disks for your computer) here is what you do.
1. Warning: Although we will use Archive and Install there is always a risk something can go wrong. As a precaution back up your User Folder and any third party applications you can't afford to lose.
2. Check to see if you have the latest Firmware Update. Note: You must be in OS 9 to update firmware
3. Boot from the install disk holding down the C key.
4. Once booted go to the Utilities Menu and open Disk Utility.
To do a clean install see Notes below
5. Run Repair Disk. If there are problems, run it until no problems are reported. If it reports that it can't repair the problems you might need TechTool Pro or Disk Warrior.
6. While still in Disk Utility run Repair Permissions.
7. Quit Disk Utility and open the Installer.
8. Choose the option to Archive and Install. This saves your data in a Previous Systems folder, which you can retrieve after installation.
9. You might want to Customize and deselect Foreign Language Translations and Additional Printer Drivers to save Hard Drive space.
10. Proceed with installation.
11. After installation is complete computer will restart. Follow prompts and set up computer.
12. Open Disk Utility (Applications > Utilities > Disk Utility) and Repair Permissions.
13. Go online and download updates, or go to Software Update under the Apple Menu and update your OS.
14. Transfer your User Folder from Previous Systems folder.
NOTE (below):
To do a clean install:
Follow steps 1 through 4 above.
a. In Disk Utility select your HD in left panel and Erase in main panel.
b. Be sure Volume Format is Mac OS Extended and the checkbox Mac OS 9 Drivers Installed is checked.
c. Select Options at bottom left in Erase panel. WARNING! This procedure will erase the contents of your entire HDD. Be sure you back up anything you cannot afford to lose!
Select option to zero all data. Click OK. Click Erase.
This process will take a while, so this is a good time to take a long walk or call your mother
d. After HDD is erased resume at No. 7 above.
Post back with any questions or comments.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6

After Security update 2006-002, RAM is halved

Hi,
Right after applying the Security Update 2006-002, I experienced a freeze upon wake-up from sleep. And a general application slowdown.
A fleeting look past the About this Mac window surprisingly revealed that the system now identifies the two additional (trusty for 8 months or so) OWC 1GB RAM modules as 512kb only. Startup memory test is reported as failed - But the modules are still listed as OK.)
I tried putting the modules in another bank. This works, after restart memory is identified correctly and system breezes. Unfortunately, another restart brings things back to the original, 1.5GB state.
Resetting nvram (reset-nvram, set-defaults, reset-all) in OF also mostly has the same effect: First restart restores things back to normal, second restart brings the problem back.
Having read about the recent PB problems where a system update aparently disabled one memory slot, something tells me it's not the RAM modules themselves. (Yes, they check out fine in memory tests.)
Any ideas?
Best,
Ben

Problem disappeared after I caved in and bought new RAM (Kingston Value Ram) as recomended by / from a local dealer. I am inclined to think this in fact was a defect in the RAM modules themselves, OWC has issued a RMA on them and I'm sending them back. Thanks!

Rosetta crashes after Security Update 2006-003

The other day I installed Security Update 2006-003, and now a number of PowerPC applications crash the machine.
It's a funny crash, the mouse keeps moving and the capslock key goes on and off, but that's it. Nothing on the screen animates or updates. Windows will not move, dock does not do anything. cannot force quit or command-tab. The only option is to do a hard reset or hard shutdown.
I found this article:
http://www.macfixit.com/article.php?story=20060517111924138&query=rosetta+crash
I hope it's fixed soon!
Matt

Hello!
I'm glad I found your post -- a brand new Intel Core Duo 20" iMac is doing the same for me after Security Update 2006-003.
What I've found on this end so far is that Norton AntiVirus 10 for Macintosh seems to aggravate the problem. I had a system that was running fine (complete with NAV10) before applying the 2006-003 update. At first I thought the problem might be due to user error--maybe NAV wasn't quite ready for Intel Macs, but Symantec says it is after you get version 10.1 from LiveUpdate. (I did.)
I finally had to erase the hard drive and reinstall the entire operating system from the provided restore discs. After I did that and got the latest software updates, I tried again with NAV. It still caused the same problem...a complete lockup.
The first time around, only NAV seemed to cause problems. Other PowerPC-native programs running in Rosetta seemed to be OK. This second time around any PowerPC-native app running in Rosetta (after the install of NAV10) would lock the machine up completely, except for the mouse pointer. (I have also noticed that the machine still responds to being pinged over the network, and that Apple Remote Desktop 3 says it is online. So the crash isn't stopping everything from working.)
So my conclusion is that there is something seriously wrong with Security Update 2006-003 and Rosetta, and it may be made worse by NAV10 for Macintosh. In any case, I'm going to steer clear of this update for now.

Problems with Security Update 2006-002

Hi there,
I have problems with latest security update. I do not know what went wrong, but after installing "Security Update 2006-002 (PowerPC)" (1.0) on 2006-03-14 15:52:40 +0100: with Software Update from Tiger, my desktop (and probably not only desktop) is damaged.
The most visible thing is that all .html and .htm documents on my desktop does not have Safari icon anymore, they have some 'blank' icon and doubleclick on them DOES NOT start-up Safari, why?
See here on the screenshot: http://www.jirkacech.com/files/Tiger-problemy-screeshot.png
note blank "apple - start.webarchive" also the Safari itself have somehow damaged icon, to same blank thing with triangle, possibly some 'generic app' or 'default.app' icon. It sits in the dock on 5th from left...(dont worry about real safari icon, that's newly added by me)
Also, on, second screenshot, http://www.jirkacech.com/files/Tiger-problemy-2.png you see that safari itself have some strange icon.
I am getting crazy, since I do not know what else is broken by last update.
I have tryed to repair permissions at least 3x, and also run update_prebindings and reboot, delete all system and user caches, and reboot.
Whole issue is system-wide, not only for one user.
iBook G4 Mac OS X (10.4.5) 1.33 GHz, 512 MB, 12-inch

The first thing you can try, if this is limited only to Safari icons, is to select on such icon, then press COMMAND-I to open the Get Info window. In the Open With section select Safari from the dropdown menu as the default app. Then click on the Change All button.
If this doesn't resolve the problem or if the problem extends to other appicons as well, then you may have some disk corruption resulting from not repairing the hard drive and permissions before doing the update. I suggest you do that:
Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Any Problems With Security Update 2006-002

Hi a few weeks ago I updated my PowerBook G4 running Mac OS 10.3.9 to Apple Security Update 2006-001 and instantly my Dock Meny dissappeared after installation and Safari broke. My Dock Menu returned after installation but Safari remained broken.
In the end I simply reinstalled Mac OS X Panther from scratch, recreated my user account and copied my data (I had it saved) back to my Mac.
I don't want to run the risk of something like this happening again. I do not have Apple Security Update 2006-001 installed at this time but I do have Apple Security Updates from 2005 installed and 10.3.9 on my system.
If I install Apple Security Update 2006-002 on my Mac (will be updating from 2005 security updates) - not updating 2006-001 to 2006-002 but installing first 2006 Security Update for the first time could I run into any problems?
Want to hear from other users who have installed this update - have updated from 2006-001 and preferrably anyone who is installing this update directly (not over 2006-001) before updating myself.

Ive got some serious problems with 2006-001 (and they wernt cured by installing 2006-002).
Photoshop and flash mx stopped working and I am unable to reinstall either!
Ive deleted all prefs, caches, everything associated with these apps.
Ive tried installing different versions of both apps - but to no avail.
Ive repaired disk permissions (even in single user mode) - and while that did straighten out a few incorrect permissions and uid's it did'nt fix my problems.
Totally at the end of my tether now, and getting impatient with Apple - this is my livelyhood and I cant afford to have downtime!
The "broken webkit" fiasco at the back end of last year was bad enough, but this just takes the p*!
Not happy - but hopeful that someone has a fix (preferably one that doesn't involve archive and restore)....

Problem with Security Update 2006-002

I have downloaded and installed the latest security update (2006-002) on my iBook running 10.3.9. As a result apparently all my Keychain related functionality is gone: Keychain Access blocks forever trying to display the password of an entry, and, more annoying, all possibility of connecting to my WiFi network (WEP key) is also gone.
I recreated a default Keychain, and tried to log on to the wifi network: the password dialog blocks forever here too.
I tried to track down what are the components changed by 2006-002, and the list is really long (I'm lost in there). The only indice I have about the problem is my Library/<myusername>/console.log where I have entries of the type:
Keychain Agent [318] NSKeychain is now obsolete!
Keychain Agent [318] NSKeychainItem is now obsolete!
Keychain Agent [318] NSKeychainSearch is now obsolete!
I suspect some libraries have been changed by the update but my keychain software hasn't.
Does anybody knows of a workaround? I'll backup and reformat/reinstall 10.3 tomorrow (after buying a pack of CDRs) but I'm rather annoyed to have to spend one or two days downloading and reinstalling all the software I need.

Thierry,
Great!
A lot of individuals (myself included) believe that repairing permissions before and after an update will keep problems from ocurring.
Glad it worked for you!
Bob

Security Update 2006-002 V1.1 breaks Office V.x apps?

After installing Security Update 2006-002 V1.1, Office V.x apps are broken (Word, Excel, Powerpoint):
Date/Time: 2006-03-19 15:43:35.872 -0600
OS Version: 10.4.5 (Build 8H14)
Report Version: 4
Command: Microsoft PowerPoint
Path: /Applications/Microsoft Office X/Microsoft PowerPoint
Parent: WindowServer [67]
Version: 10.1.6 (10.1.6 (040913), © 1987-2001 Microsoft Corporation. All rights reserved.)
PID: 288
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
Thread 0 Crashed:
0 MCPZ.stb 0x0062fa88 0x5c59d0 + 434360
1 MCPZ.stb 0x0062b3e8 0x5c59d0 + 416280
2 MCPZ.stb 0x00629aec 0x5c59d0 + 409884
3 MicrosoftOffice2001Z 0x020c2114 0x2008000 + 762132

3ivx is an MPEG codec http://www.3ivx.com
The problem I had occurred when trying to start any Office V.x app (Word, Excel, Powerpoint), either by clicking a Dock icon, or double-clicking the app icon.
Double-clicking a document (.doc, .xls, .ppt) launched the relevant application without problem.
I didn't find any other application that had the problem while 3ivx D4 v4.5.1 was installed, but did not search very far (e.g., Safari, Internet Explorer, Mail, iTunes, iPhoto all worked, but didn't try much else).
Any hints in the crash log? That's where I found the line about the 3ivx codec.
Is your install of Office V.x updated to latest? (which is not terribly recent, iirc, V10.1.6, at http://www.microsoft.com/mac/downloads.aspx#OfficeX).

DVDs won't mount after Security Update 2006-004

DVDs won't mount after installing Security Update 2006-004 via the Software Updater in OS 10.3.9. CDs work OK.
I've repaired permissions, reset PRAM, tried booting in OS 9.2.2 but can't get the DVDs to mount/play or be seen by disk utility.
Please help.
iMac 400mhz
Original Matshita DVD-ROM SR-8184
iMac Firmware 4.1.9
Thanks

How recently before installing the Security Update did you use the DVD drive (for DVDs)? If it was not immediately before the update, the two are probably not related. Also, if you restarted in Mac OS 9 and the DVD drive still does not work, it would seem to indicate the problem is hardware, not software.
You can try opening up the iMac and checking the connections to the DVD drive. Also, it is possible that your PRAM battery is dying (unless you have replaced it recently); that can cause unexpected problems.

2nd cd/dvd drive not recognized after security update 2014-002

I have a 3rd party CD/DVD drive as my 2nd drive in my Mac Pro and after installing security update 2014-002 it is not recognized by the computer. It does not even show up under "About This Mac" or as a drive in disk utility. Worked fine up until this update. Any ideas?
Thanks

I think I have solved my own problem. After 'restarting' the computer several times with no effect I turned the computer off and let it set for 15 minutes, not that I think the time period had anything to do with it, but upon turning the computer back on the 2nd CD worked fine. I'm sure you folks who are wizards in this can explain why turning the computer off did what restarting did not.

PPC-iMac: Black screen on restart after Security Update 2006-003

Did the Security Update 2006-003 this morning. On restart the screen is showing the grey Apple-logo for several seconds. Then it goes black, with the prompt in the upper left corner: "localhost/root:" Vent running in high gear. Entering unix-commands is possible, but no graphic interface coming up. How to fix this? Don't want to reinstall the whole system.
iMac G5 20" PowerPC iSight Mac OS X (10.4.6)

I'm having basically the same problem with my PowerBook 1Ghz Aluminum 17". After running the latest security update and latest iLife patches using SU, my system boots to the local Darwin consol login. I can see my HD and all it's files, but I can't get the machine to boot back into GUI mode. Safe mode doesn't work.
This was a newly refreshed system running 10.4.6 and ONLY iLife installed - nothing funky and no 3rd-party apps other than those pre-installed in 10.4.x.
I've booted with the 10.4 DVD, repaired permissions (again) and repaired the drive (reported not needed). Zapping the PRAM doesn't help.
Perhaps I have a lemon because I have had problems with this machine in the past, but only when installing major system updates between 10.3-10.4 with non-apple RAM. I don't think this is the culprit this time as the machine has been functioning fine since the last fresh 10.4 install (with some OWC RAM).
Any ideas? Anyone have tips for what can be done in the console to repair the system?
ARGH
PM G5-Quad 2.5GHz | eMac G4 1.25GHz | PM G4 800MHz | PB G4 1GHz 17 | PM G4 400MH Mac OS X (10.4.5)

System preferences shot after Security Update 2006-008 - no sound any more

All sorts of strange problems after running the 2006-008 security update, yet only affecting one my two MacMini:
System Preferences completely "shot", with the Date&Time item/icon looking very odd.
The little flag for language/keyboard setting and date/time did not show any more in the top menu bar -- basically everything left side of the blue Spotlight magnifying glass icon was gone.
Also Safari much more prone to quit.
Managed to delete some prefs and cached stuff and to replace the System Preferences application with the one from the other (working ok) Mac.
(I wish such components were available on the web!)
However: Currently I get no sound whatsoever. When I check the option to have the little speaker symbol displayed in the menu bar it shows. But as soon as I click it once, it vanishes from the menu bar.
In the Sound window, I have Volume set to full, yet everything is greyed out, "Sound off" is checked without my doing, while "Display sound volume in the menu bar" unchecks itself everytime(!)
And, very odd: While resetting PRAM and the fsck-routine working ok (no problems found) and disk utility claiming to have repaired all permissions, I can not run a reset of Open Firmware/nvram with the O-F-Apple-Alt key combination (I'm using an original Apple USB Keyboard for this, since I'm aware that my 3rd party keyboards from Logitech and Microsoft often refuse to perform such kind of "low level" tasks).
Mac Mini 1.66 GHz 2 GB RAM Mac OS X (10.4.8) German language OS

finally found the solution to my problems at
http://www.macfixit.com/article.php?story=20061229012312895
Late-Breakers
Friday, December 29 2006 @ 01:23 AM PST
Security Update 2006-008 Special Report: General fixes for common issues
"Re-apply the Mac OS X 10.4.8 combo updater Once again, re-application of the current combination updater (Mac OS X 10.4.8 for PowerPC or Intel) has proven useful in the case of Security Update 2006-008. Doing so overwrites potentially problem-causing files".
while it is widely known that the folks from redmond do release software before all the bugs are removed, i was not aware before that apple is following the same approach: using their customers as guinea pigs when it comes to updates. there is plenty of reports on MacFixIt about all sorts of troubles with previous apple os updates.
Mac Mini 1.66 GHz 2 GB RAM Mac OS X (10.4.8) German language OS

Leopard Server 10.5.2 hosed after Security Update 2008-002 v1.1 Server

I am running Leopard Server 10.5.2 on a Mac Pro 2x3.2 GHz quad core xeon. I did a software update today which included Security Update 2008-002 v1.1 Server. I did disk verify and permissions repair on as usual before the update. Afterwards, I found that I could not log into my local user account with administrator privileges. I can log in as "root" using the local administrator password. All my users can log in. But all the groups have disappeared, and so have the wikis associated with these groups. The data seems to be there in /Library/Collaborations, however.
This was a simple server configuration with 5 users - I was essentially using only the groups wiki function. The server had no client machines. Its not like I had a complex configuration. I am absolutely mystified - spent an hour on the phone with Apple support and they took all the server logs for analysis. I was wondering if anyone else had this update go wrong in a similar configuration.
I would be very grateful for any advice!

I had the same thing happen. It took me a while to figure out why because I installed the update before the weekend and then came in on Monday and nothing worked. I've searched around quite a bit and found some people had the same problem but haven't found a solution. Right now my server is sitting there useless, even after reverting to a backup before the update.
Did you or anyone else find a solution to this?

After Security Update 2009-002 no connection to server

After running Security update 2009-002 I can not connect to a server, e.g. a webdisk with Apple+K command. Rebooting does not help, nor entering fresh login data.
Does anybody have a clue?
thanks in advance,
Flip

Hello Flip, and a warm welcome to the forums!
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
Open Keychain Access in Utilities, use Keychain First Aid under the Window Menu item, then either check the Password under that item, change it, or delete it and start over.
Also remove it from the CMD+k window by highlighting it and clicking the little minus button.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Reboot, test again.

HT6207 Fails to establish VPN connection after Security Update 2014-002

I have successfully used a VPN service with Mac OS 10.7, 10,8 and 10.9. After an update with Security Update 2014-002 connection requests are directy rejected by the MacOS. When looking into the VPN-log, the same set of 4 messages is logged after each attempt:
publish_entry SCDSet() failed: Success!
publish_entry SCDSet() failed: Success!
Fatal signal 13
can't talk to PPPController : Broken pipe
Is there a known remedy?
/andersbl

The VPN connection to this specific servcie provider has worked for me with previous MacOS and with 10.9. It now fails and the only change to my Macs are that I loaded the Security Update 2014-002 in the of April. I checked by adding the exactly same VPN connection definition to a 10.6 Mac and connected from the same LAN. This succeeded. Thus I suspect the Security Update, or that there is some paramater that now needs to be defined/changed.

Can't mount movie DVDs after Security Update 2006-002

Similar Messages

Maybe you are looking for