Can't open a specific website with BT infinity

Hello
I got a massive problem with BT infinity (fibre to home service, BT HomeHub 5).
To make a long story short:
Internet normally works quick and fine (I get 70 Mbps download speed and 20 upload on average) BUT a specific website I use for job purposes doesn't work.
This problem first arose when I upgraded from BT Broadband to Infinity last year; prior to that that website worked just fine. 
So you may be asking yourselves why I had waited one year to speak up: simple, because in the meantime I had managed to bypass the problem. To be more precise the website I am talking about has a numeric extension which I just deleted and things worked fine (EXAMPLE: www.iamnanogianni.com:123 , I just would type www.iamnanogianni.com and it worked) unfortunately this is not possible anymore and that extension has now to be typed in order to open the website.
This won't just work for me.The page I try to load looks scrambled and after I type my username and password it just freezes.
-I've checked the firewall (and also temporarily disabled it to see if that was the problem),
-I have reset both the HomeHub 5 and the OpenReach modem,
-I have utilised a old HomeHub3 modem (exactly same result),
-I have called BT 100 times and they say that that particular website is not blocked. Sometimes they say it is a coincidence this is not working (!!!), some other times they just remain speachless, sometimes they genuinely try to help but to no avail sadly,
-As soon as I disconnect from my router and connect to, say, BTfon WIFI then the website magically works  on my laptos. I am talking about a Mac and a Dell,
-Last but not least an OpenReach engineer came to my place and left empty handed (ie he was not able to determine the problem).
What would you do if you were me?
Many thanks in advance for your help

If you are using a web browser, then without the extension it will default to port 80. As you are using a non-standard port, which is actually reserved for the NTP service, you will need to use the port 123 extension.
I cannot see how it could possible work without the extension, without some form of redirection.
You need to move the webserver to port 80, and not port 123.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • Can't open a specific wesite with AES encryption on

    WRT54GX2 router  set up with WPA and AES encryption, will not open a website that I know is working (it's my ISP, webmail site).  When I change to TKIP the site opens normally, but my wireless printer then drops off the network.  Any one have a fix?

    I agree with toomanydonuts suggestion. You can try the steps which toomanydonuts has mentioned and i think that will make your computer and printer work wirelessly.

  • Firefox won't open a specific website and neither with IE, but it opens fine on other computers

    I have been trying to open a specific website: arabicpod101.com since yesterday, and I keep being given the Problem loading page error and am told that the connection was reset. I can't seem to open it on Internet Explorer either, but had no troubles accessing the website from a friend's computer.

    Reload a web page and bypass the cache with:
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    See [[Keyboard shortcuts]] and [[Mouse shortcuts]]

  • Can not get a specific website to load in either Safari or Firefox?

    Can not get a specific website to load in either Safari or Firefox on my MacBook Pro.  Website loads on other devices such as iPhone, PC, etc.  I've tried emptying the Cache in Safari.  Any other suggestions?

    The problem I am having is that this website will not load on my MacBook Pro.  I don't know if it has something to do with the fact that the website was created on this computer using iWeb and then I had to change to a different webhost on July 1st (Dreamhost) when Apple discontinued Mobile Me / Webhosting as of July 1st.  That is when I was no longer able to load the site on this one computer.
    I get this message with Safari:
    Safari can’t open the page “http://www.challengefitnesscrossfit.com/” because the server where this page is located isn’t responding.
    and this message from Firefox:
    The connection has timed out
    The server at www.challengefitnesscrossfit.com is taking too long to respond.

  • Can't open libHaru-generated PDF with Reader, other readers work.

    Our application uses libHaru to export PDF images.  These PDFs can be opened using PDFlite on Windows, Preview on Mac and some other readers.  However, I have tried several versions of Adobe Reader on both platforms and the files fail to open with the message: "There was an error processing a page.  There was a problem reading this document (14)."   So, it seams that Adobe Reader believes that there is problem with this file.  However, from my very limited understanding of PDF structure, I have no idea what might be wrong, so I don't know how to fix it.  The file is written unencrypted.  It is about as simple a PDF as we can generate - a red-filled rectangle.  I would greatly appreciate any suggestions or help.
    Here is a sample PDF:
    %PDF-1.3
    %∑æ≠™
    1 0 obj
    <<
    /Type /Catalog
    /Pages 2 0 R
    >>
    endobj
    2 0 obj
    <<
    /Type /Pages
    /Kids [ 4 0 R ]
    /Count 1
    >>
    endobj
    3 0 obj
    <<
    /Producer (Haru Free PDF Library 2.3.0-dev)
    >>
    endobj
    4 0 obj
    <<
    /Type /Page
    /MediaBox [ 0 0 236 207 ]
    /Contents 5 0 R
    /Resources <<
    /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ]
    /Pattern <<
    /Type /Pattern
    /PatternType 1
    /PaintType 2
    /TilingType 2
    /BBox [ 0 0 100 100 ]
    /XStep 100
    /YStep 100
    >>
    >>
    /Parent 2 0 R
    >>
    endobj
    5 0 obj
    <<
    /Length 6 0 R
    >>
    stream
    1 0 0 -1 -118 296 cm
    1 w
    0 0 0 RG
    [] 0 d
    1 0.3 0.3 rg
    q
    % Rect
    119.25 90 m
    352.5 90 l
    352.5 294.75 l
    119.25 294.75 l
    119.25 90 l
    h
    B
    Q
    endstream
    endobj
    6 0 obj
    135
    endobj
    xref
    0 7
    0000000000 65535 f
    0000000015 00000 n
    0000000064 00000 n
    0000000123 00000 n
    0000000188 00000 n
    0000000458 00000 n
    0000000647 00000 n
    trailer
    <<
    /Root 1 0 R
    /Info 3 0 R
    /Size 7
    >>
    startxref
    666
    %%EOF

    You would need to post a sample PDF that demonstrates the problem.  All you posted there is text.  (PDF is a BINARY file format)
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Thu, 13 Oct 2011 11:02:42 -0700
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: Can't open libHaru-generated PDF with Reader, other readers work.
    Can't open libHaru-generated PDF with Reader, other readers work.
    created by Fred Snerd<http://forums.adobe.com/people/Fred+Snerd> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/3969828#3969828

  • Why does safari close every time I open a specific website

    When ever I open a specific website on safari,it closes and i have to reopen it.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • How do i open sites that require adobe flash? I can't open my own website, not to mention tons of other sites.  It's ridiculous.

    How do i open sites that require adobe flash? I can't open my own website, not to mention tons of other sites.  It's ridiculous.

    Flash is not supported on the iPad and never has been supported on any iOS device - and as Adobe have never managed to make a version of their flash player that works on iOS devices, and they have recently announced that they are stopping development on all mobile versions of it, it probably never will be.
    Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

  • HT4890 Can I share a specific event with friends on iCloud via Photostream?

    Can I share a specific event with friends on iCloud via Photostream?

    No, not until iOS 6 comes out.

  • I can't open a PDF file with password with my iphone app

    I can't open a PDF file with password with my iphone app, the app send me an error, but the password is correct. This only happend in the new version of iphone. In the latest version I didn't have this problems.

    Can you please share the file with us at [email protected]? Also, can you please confirm that you are viewing the PDF in the Adobe Reader app rather than an app like dropbox, Mail or Safari?

  • Can't open file--"not compatible with this version"

    I can not open a photoshop file, although it was saved with the same version. "The file is not compatible with this version" can someone help me.
    thanks

    hi kirsti
    I use windows 7 and photoshop cs5
    thank you
    Am 02.05.2012 19:06, schrieb Kirsti Aho:
    >
          Re: Can't open file--"not compatible with this version"
    created by Kirsti Aho <http://forums.adobe.com/people/Kirsti-CA> in
    /Community Help Application/ - View the full discussion
    <http://forums.adobe.com/message/4374618#4374618

  • I can't open or save file with Java Web Start

    Hi,
    i can't open or save file with Java Web Start:
    import java.io.*;
    import java.util.*;
    public class MetaDataFileCreator {
    public String fileNameSpace = null;
    public String fileName = null;
    protected Properties file = null;
    public MetaDataFileCreator(String fileNameSpace, String fileName) {
    this.fileNameSpace = fileNameSpace;
    this.fileName = fileName;
    public void createMetaDataFile() {
    try {
    System.out.println("file METADATA");
    ClassLoader cl = this.getClass().getClassLoader();
    String nameFileMetaData = fileNameSpace + fileName + ".txt";
    FileOutputStream fileOS = new FileOutputStream(cl.getResource(nameFileMetaData).getFile());
    file = new Properties();
    file.setProperty("aaaaa", "aaaa");
    file.store(fileOS, "");
    fileOS.close();
    } catch (Exception e) {
    System.out.println("Error writing metadata-file: " + e);
    System.exit(1);
    e.printStackTrace();
    I have try also to open a file like this:
    ClassLoader cl = this.getClass().getClassLoader();
    file.load(cl.getResourceAsStream(nameFile));
    also like this:
    try {
    fos = (FileOpenService)ServiceManager.lookup("javax.jnlp.FileOpenService");
    fss = (FileSaveService)ServiceManager.lookup("javax.jnlp.FileSaveService");
    } catch (UnavailableServiceException e) {
    fss = null;
    fos = null;
    System.out.println("Error with JNLP");
    System.exit(1);
    if (fss != null && fos != null) {
    try {
    // get a FileContents object to work with from the
    // FileOpenService
    FileContents fc = fos.openFileDialog(null, null);
    //FileContents newfc2 = fss.saveAsFileDialog(null, null, fc);
    // get the OutputStream and write the file back out
    if (fc.canWrite()) {
    // don't append
    os = fc.getOutputStream(false);
    } catch (Exception e) {
    e.printStackTrace();
    also like this:
    File f = new File((System.getProperty("user.home")+"x.txt").toString());
    FileOutputStream fileX = new FileOutputStream(f);
    OutputX = new PrintWriter(new BufferedWriter(new OutputStreamWriter(fileX, "UTF8")));
    OutputX.println(....
    but it doesn't work with Java Web Start.
    Can someone help me?
    How can I open or save file?
    thank you.
    Sebastiano

    Did you specify <all-permissions/> in your JNLP file? Did you sign your code? What error are you getting?

  • I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?

    I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Is this an Adobe issue, Microsoft issue, or security issue? 

    Thank you!  That seemed to do the trick.  Don't think I'd ever have figured that one out!!
           From: pwillener <[email protected]>
    To: Sharon Atkins <[email protected]>
    Sent: Monday, February 16, 2015 9:47 PM
    Subject:  I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?
    I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?
    created by pwillener in Adobe Reader - View the full discussionSince you mention Microsoft, I assume that you are on Windows. Can you open Reader by itself?  If so, try disabling Protected Mode Edit . If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7201334#7201334 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7201334#7201334 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • HT204382 I can't open a .wmv file with quicktime player.  Shouldn't I be able to?

    I can't open a .wmv file with quicktime player.  Shouldn't I be able to?

    No. To do so you need to install Flip4Mac WMV Player 2.4.4.2.

  • I can't open D7200 NEF file with Photoshop CS6. I checked the updates and there are no updates available. What do I do?

    Hi,
    I can't open D7200 NEF files with Photoshop CS6.I checked the updates and there are no updates available.What do I do?
    Nitin

    For the time being, shoot JPEG images. At this time there is no support for NEF files from the D7200 in any Adobe product. It was released at such a time that it wasn't included in the last Camera Raw update. And Lightroom hasn't been updated either. Consequently, there is no DNG converter available at this time. We will have to wait and see what programs will be able to accommodate the D7200 when Adobe releases updates or upgrades that support the camera.

  • Can't Open 3rd party Apps with my User (Icon Bouncing then Application Not Responding)

    Hi
    Problem:
    I can't Open 3rd Part Apps with my user (FireFox, Chrome, Dropbox, GoogleDrive, Mega, Final Cut Pro X, etc) they just star bouncing and after a while they stop bouncing then i righ click on them and it says "Application Not Responding", but i can open native apps like Safari, iTunes, iMovie, Finder, Settings
    Other Events:
    -Just Before this happend i was editting a video on FCPX, y export it and tried to upload to Google Drive (in Chrome), when it was uploading I closed FCPX and the uploading stop it at 91%, y tried to reupload but then I realized that this video was in a temp folder and it wasnt there anymore, so I open FCPX to export it again and i couldnt, it was just bouncing and then "App not responding".
    -After Installing Yosemite i feelt it slow even after it finished the encriptation File Vault, specially in chrome.
    I have tried:
    1-Repair Disk Permisions
    2-Reset SMC
    3-Reinstall FCPX
    4-Decrypted the Disk and create another user and i was able to run Chrome, FireFox and FCPX, When I opened FCPX it started but when it was trying to open the project that i was working , it restarted the app and i couldnt open FCPX again, just bouncing and App Not Responding
    Any suggestions to keep my User working?
    Macbook Pro Mid 2012
    -OSX Yosemite,
    -16GB Ram1600MHz DDR3
    -750GB 5400RPM
    -2.9GHz dual-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 4MB L3 cache

    Yes, as long as you let TM do a full disc backup (that is, you do not exclude anything in the TM backup settings) you will have a backup that allows a full system restore - puts everything back just as it was.
    You can also clone your system using the shareware app SuperDuper or the donation-ware app CarbonCopyCloner
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    http://www.bombich.com/
    Both of these apps will make a true clone (literally, a bit-by-bit copy) of your hard drive onto an external drive.  This clone will actually be bootable itself (you plug in the drive and hold the option key during startup then select the clone to boot from).  You would boot from the clone, then reverse-clone it back onto your internal hard drive.
    If you are really serious about being highly confident of not loosing files, you could use both  - I keep a TM backup on one drive, and 2 clones on separate bus-powered hard drives.
    P.S. even if you had not had any issues, you really, REALLY should be keeping regular, up to date backups anyway - things go flooey without warning sometimes and you risk loosing everything on your machine if you DON'T keep regular backup copies available.

Maybe you are looking for