Can't open Belkin router 198.162.0.1

Can't open Belkin router b 192.168.0.1

welzmo wrote:
Can't open Belkin router b 192.168.0.1
192.168.100.1 modem?
192.168.2.1 router?
192.168.0.1, 192.168.1.1, 192.168.2.2 other options.

Similar Messages

Multiple Routers, can't open all router CP's on network?

My setup is:
MODEM > WRT54G(1) > WRT54G(2) > WRT54G(3) > WRT54G(4)
Spread throughout my hotel.
Now my problem is I can't access all the router CPs (192.168.1.1 menu) from the (1) router. I can access them if I connect individually by G or Ethernet but I want to be able to check the status of all of them from (1)(Just incase I am out of town and need to reset 1,2,3,4 router remotly). I have changed all they're local IP's as follows: (1)=192.168.1.1 (2)192.168.1.2 (3)192.168.1.3 (4)192.168.1.4
Is there some sort of port or gateway I have to open or a different IP I must use?
Thanks in advance for any help I can get.
Also is there a way to make a router "Auto-Reset" like add a time daily that it reboots itself? I seem to have alot of problems with these needing to be rebooted.
Message Edited by 1337GROUP on 07-29-2008 05:39 PM

The IP address you told me are correct ...you should share files from computer (1) to (2) or (2) to (3) ..... disable all firewall on the computer & then try to ping the address .....

I have a dvr and I want to monitor from my phone. this worked when I had a Belkin router that let me open ports. I use "canyouseeme" and it can't see 80, 9000 or 1025. How do I make them available?

I have a Lorex DVR that I want to monitor from my IPhone and IPad. I used to be able to do this when I had a Belkin router (easy to open ports) but I bought the AirPort Extreme router and no longer have that capability. When I use "canyouseeme" they can NOT see 80, 9000 or 1025. Lorex says I need them all available in order to access. Help! And all the help I see refers to a earlier version of the AirPort Utility so I cant use those to look at anything, I cant find the same screens, I have version 6.1 (610.31). I also don't really understand how ports work, so I need a pretty basic explanation.

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

Can't open a website after installing the router.

I just installed the wireless router, WRT54G, and secured wireless on it. Did not do anything else. I finished and came back to my wired connection and my usual business of the day and I noticed I cannot open ONE image hosting website. I could before and once the setup was done, I get the "server cannot be found". I can though open the site on the wireless connection and browse it. But not on wired. the website is www.photobucket.com and I really need access to it on my wired connection. Since the problem appeared after the install and turning off firewall and changing browsers does not solve the situation, I suspect it has to be some setting in router settings. Anyone can tell me how to remedy this situation? Thank you

Pls read my post on "Internet Connectivity", seems, at least for the time being to have solved my issues. fish

Can't Config Belkin 802.11g Router

Belkin model F5D7230-4 doesn't accept any of the changes i make in set-up screens. It acts like it doesn't understand Apple keystrokes. I can select the various set-up screens, make entries, etc, but then when try to complete it with "submit", it just goes back to defaults. I've tried the 10 sec reset, etc, and I've contacted Belkin Help, but they were no help. I even cleared Safari cache. Belkin NoHelp finally said "then use a PC to configure it," but couldn't explain why, so I refused because they claim OS X compatibility. I've searched this board using "configure belkin router" and didn't find any other posts that describe similar problem. Any thoughts on why Safari might not be able to properly communicate with the router? BTW, the internet connection works fine, but unable to set any wireless security for above reasons, so I quickly disconnected it and went back to using a hardwired connection to a secure Linksys wireless b currently in use by other PCs in the house.
PBK G4 Mac OS X (10.3.9)

I have the same router.
The administration web server seems to be written only for Internet Exploder under Windows. It behaves badly under Firefox and Opera for Windows and is marginally useful with Safari as long as you don't touch the wireless settings while you're actually connected via wireless.
I've been able to edit settings with Safari and Firefox under OS X, but the wireless settings are especially hard to edit using a wireless connection because the router restarts when you edit something effectively killing the wireless connection. The other browsers figure out that the connection is dead and quit trying a meta refresh to the router. IE on the other hand, is just brain-dead enough to keep trying until **** freezes over.
I can't explain why you can't edit dialog boxes, unless the browser thinks the connection is dead on a settings change and it figures allowing you to edit something is pointless.
The only selling point to this router was its early emergence on the market with WPA. That's why I bought it.

Which security risks can be exploited bij opening a routed port on a windows network

Which security risks can be exploited by opening a routed port on a windows network
Our company is implementing a web application with potential security issues we have never dealt with before. The situation is
as follows:
Network
•A LAN with internet router and firewall with a port (f.e. 4589) open, which is routed to IIS server address.
•Network with IIS server, Windows clients and server(s)
•MSSQL application Database on a windows client or server
•IIS Server hosts a .NET 4.0 WCF Web service
Purpose of this config:
•Internet users can use IIS web service to read and write application database tables.
•IIS server has a certificate for authenticity, web services are configured to only use https.
•Application exposes 2 web services:
•1. without user authentication: can only read non-essential information from database
•2. with user auth., for reading and writing more essential information.
I have the following questions concerning security:
1.Can I Isolate external access to the IIS server only, and shield access to the rest of the physical (windows) machine ?
2.We have a lot of customers with only 1 windows 7 or 8 PC. What extra security risks arise in case of a combined MSSql Express
database, Windows integrated IIS 7 or 8, and a customer doing its daily business on the windows client on this PC. (Daily business involves: use of our application (with database), Email, Office, Internet)
3.Can you see any other security vulnerabilities in this scenario, assumed that all machines in the LAN are properly patched ,
shielded with antivirus product and maintained?
Since security is not really my field of expertise, I would be very happy to get some explanation on potential risks of this
configuration.
Thanx in advance, Oskar Stok
Thanks in advance. Sincerely, Robert Bakker Flexdata

Hi,
1.Can I Isolate external access to the IIS server only, and shield access to the rest of the physical (windows) machine ?
You can configure Windows Firewall rules based on ports.
2.We have a lot of customers with only 1 windows 7 or 8 PC. What extra security risks arise in case of a combined MSSql Express
3.Can you see any other security vulnerabilities in this scenario, assumed that all machines in the LAN are properly patched ,
Honestly, I don’t see vulnerabilities here, if you want to secure the server and clients, place them in a private network, you can also use NAT and hardware firewall.
In addition, you can install System Center Endpoint Protection to prevent virus and spyware.
More information for you:
Configuring Firewall Rules
http://technet.microsoft.com/en-us/library/dd448559(v=WS.10).aspx
Frequently asked questions about malicious software
http://technet.microsoft.com/en-us/library/ff823783.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

My mac can't connect to belkin router? My mac can connect but I still can't surf the net? Help Please... This is my first time to use mac and belkin.

My mac can't connect to belkin router? My mac can connect but I still can't surf the net? Help Please... This is my first time to use mac and belkin.

Is it Wireless you're trying to connect with?
Which Mac?
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Can't open .bin files downloaded from Belkin's site

I can't get firmware updates from Belkin's website to open. Supposedly they're in .bin archives including instructions and the firmware. I even updated my Stuffit Expander to version 10. No luck.
If I drag the bin file onto expander it pops up a dialog box (that goes by too fast to read in less than 7 or 8 tries ) but there's never anything expanded to the desktop (the folder where the .bin file is).
This is the file I need http://www.belkin.com/support/download/downloaddetails.asp?download=993 and I've tried also to open files from this page too http://www.belkin.com/support/article/?lid=en&aid=5027
Can anyone make a suggestion on how to get this file expanded or is the linked file just a corrupt file? Thanks.

Did you take the trouble to read the install.pdf file located on the same download page as the firmware file?
I actually read the instructions elsewhere on that site. I don't ask for help without trying to find the answers on my own. For example, before posting, I did both a Google search on "can't open .bin files" and also did a search on the discussion boards too. Or was that a rhetorical question?
It gives specific instructions on installation.
I wasn't asking about installation instructions.
You don't open the .bin file with Stuffit. It's not an archive. It's actually a binary file.
Stuffit Expander was listed as the default application when using CMD-I AND elsewhere on that site it said it was a Mac archive .bin file. The fact that it's NOT a .bin archive file is news to me. Thanks.
If you continue to have a problem contact Belkin's tech support. Apple Discussions does not provide support for third-party products.
I wasn't asking for support with a Belkin product. I was asking for help getting what I thought was a Mac formatted .bin archive open using my Mac. I provided a link to the file because I thought perhaps it was corrupt.
No need to get your knickers in a bunch.
Thanks for explaining that it's not a .bin archive because obviously I was not going to figure that out on my own based on what I read elsewhere.

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please

Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please help maybe its a firewall? Cheers Dave

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Since I installed a new Belkin router, my macbook pro can not connect to pop mail.

Since installing a new Belkin router, my macbook pro is unable to connect to my work pop mail. How can this be resolved?

I asked the hosts to relocate your post to the MacBook Pro forum.

Drag and Drop is not opening the highlighted folder so I can't drop into route folder

New issue since Yosemite upgrade:
When I grab any file to drag & drop somewhere, and move that file over a folder highlighting it to open a route folder to drop it into, it won't open the folder to reveal its contents. I can only drop the file into that folder. So it's one folder at a time. Man, it can take me almost a minute to get one file where I want it to go when there is multiple subfolders. This is true for any folder anywhere including the sidebar and within any application that opens a finder window for saving etc. It is very limiting and frustrating.
Also, it is only for my user login, the other users work fine. But I really don't want to have to create a new one.
Please, help! I would appreciate guidance from anyone, or at the least sympathy to know I'm not the only one.
My mac specs:
OSX Version 10.10
Macbook Pro Retina 15" Late 2013
2GHz Intel Core i7
Intel Iris Pro 1536
(also sorry about the category if it's wrong, there was no 'finder' category)
Stu.

Sorry, i forgot to write select RELAUNCH. If the newly created one didn't fix the problem, then something else is amiss. One way to determine that is to log into a good admin account, open up Users & Groups, delete the bad account, saving its data, recreating it with the same credentials, logging into the newly created one, and seeing if the problem's fixed. If so, then open the save data disk image stored in /Users/Deleted Accounts/ and slowly move plists from the Preferences folder into the new account's folder, restarting, and seeing if the problem reoccurs. Eventually, you'll isolate the bad or corrupting items. The procedure's long and time-consuming, but faster than resetting all the preferences for everything you've already set.

Can my airport express join my network via Belkin Router?

What's up everyone?
I have a question regarding my apple airport express. Is there any way to get this my airport express to join my belkin network? My current network is being run by my Belkin N Wireless Modem-Router(model# F5D8633au4A)and i can't seem to get my airport to join it properly. Everytime i try to install it, it seems to mess with the signal my laptop gets and the AEX doesn't even connect to the network. The best i've gotten is it shows up on itunes, but i can't select the remote speakers.
For now, i just want my AEX to be able to join wirelessly so i can use airtunes, but would it also be possible to set it up so that i can plug my xbox into it so it can go online?
Anyone have any experience setting up the AEX with a belkin router?

Hi:
I do not have a Belkin router, but have basically the same problem using a Linksys 54G 802.11n router.
I can setup my HP laptop/printer/router as a wirelss network, but cannot get my AE to join that network as a client, wirelessly. IF, I have an Ethernet cable connected from the router to the AE, I can configure the AE, get the solid green LED on it, etc., and play music out of external speakers, but all falls apart whn I disconnect the Ethernet cable from the router to the AE, even though Airport Utility has things setup as a wireless connection.
Have you tried setting up an Apple ad-hoc network from the PC/laptop to the AE and speakers ? See if you can do that. If so, you can play music wirelessly thru the AE/speakers from iTunes (the LED will be a flashing Amber). The trick is that you have to wait about 1-2 minutes duing the config in order for the AE to establish the connection where it (the ad-hoc network) shows up in your system tray network list, when the icon is clicked. The Appel ad-hoc network will have a name like Apple XXXXXX, where the XXXXXX are 6 (of the 12) digits from the AE's MAC address (listed on its label).
If this works, my guess is that the AE is OK, and the problem is getting your AE to join your already existing Belkin network (in my case, LinkSys network).
I was at one of "Apple Genius Bars" last night probing this problem, and they feel that this is most likely a compatability problem between the AE and non-apple routers...though I do not feel that there should be a problem, or they shouldn't be selling the product claiming that it works with non-apple products.
The guys at Apple suggested that I call Apple for Tech Support at:
1-800-APL-CARE (1-800-275-2273)
There shouldn't be a charge, though the guys at the Genius Bar said that if they try to charge, to raise a big stink over the phone since the
Apple product is not working as claimed !
Another issue: What level of encryption are you using with your router ?
WEP-64, WEP-128, WPA, WPA2 ???
This greatly affects how easy (or hard) it is to add the AE to your existing network. From what I have learned, the lower the level of encryption, the harder it is to add the AE to the network, since it is an older, less-capatible standard.
Let me know if you find any answers...
DaleB

IPod Touch (and iPhone) can't find Belkin N Wireless Router

I spent over an hour looking for an answer to this problem today and accidently found a solution - so am posting the answer.
Have a 2 year old Belkin N Wireless Router (model F5D8236-4v1) with SSID broadcasting on and WPA/WPA2-Personal (PSK) security selected.
All the Windows laptops in the house could see the wireless SSID and could successfully log in after entering the WPA/WPA2 password.
Both iPod Touch and iPhone 3GS could NOT see the SSID. Also entering the wireless router IP address directly instead of the SSID did NOT work.
After an hour of looking for solutions on-line, including:
- Tried no security
- Tried WEP 64 and 128 bit security
then stumbled across a thread in a forum where someone referred to changing a "-" (dash) in an SSID name to a character. So tried this.
The old SSID name includes spaces - "name name1 name2". I deleted the spaces, and the problem was solved.
This Belkin router comes with a default name of BelkinN_WirelessXXXXXX, but does not say in the online help to NOT use spaces in the SSID name. And again, the Windows laptops could see the wireless Router while it had the SSID name INCLUDING the spaces in the name.
Hope this saves at least one person going through the same wasted hour.

Click on the blue arrow to the right of the network name, if IP address starts with "169." ,restart your router. It should connect properly after your router reboots in a minute or two.

Can not open interactive maps (map of the cities public transport routes) on my Mac in Safari

I need help please, I want to look at an interactive map on this site in my Safari browser but can not open the map. It works fine on a in WIndows Opera, but nothing happens when I try to open it on my Mac in Safari or Chrome - http://bsag-netz.de/index.php/de/tagesnetz
Is it perhaps a plug in that is missing or some setting that must be changed?

It's not Java, and you should not install Java. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Can't open Belkin router 198.162.0.1

Similar Messages

Maybe you are looking for