Can't open d90 NEF files in CS3 or bridge. Any ideas?

I have recently upgraded to a Nikon d90 and i can no longer open any NEF files in photoshop or adobe bridge. Any ideas pleAse? Thanks

Hello, according to http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html, the D90 is supported by ACR 4.6 that works with CS3. Is it the version currently installed? (check in about>plug-ins)

Similar Messages

Can't open D90 NEF files in Camera Raw CS3?

I've downloaded the latest version of the plug-in, and it works perfectly when opening JPEGs. However it won't open my RAW files, it says they're not recognised?

Unless it is listed in the ACR 4.6 compatibility list (in which case there is some other issue), the D90 came out after CS3 was obsolete so Adobe did not update the obsolete Camera RAW plug-in and only added D90 support to the current ACR plugin which comes with CS4.
If you want to open D90 files in an older version of Photoshop you can download the latest DNG Converter from Adobe's website, which will recognize the RAW files, and convert the NEFs to DNGs and then open those DNG copies in CS3...or update to CS4 (or wait until Spring and update to CS5--just a guess since the LR3 beta expires 4/30/10).

I can't open D7200 NEF file with Photoshop CS6. I checked the updates and there are no updates available. What do I do?

Hi,
I can't open D7200 NEF files with Photoshop CS6.I checked the updates and there are no updates available.What do I do?
Nitin

For the time being, shoot JPEG images. At this time there is no support for NEF files from the D7200 in any Adobe product. It was released at such a time that it wasn't included in the last Camera Raw update. And Lightroom hasn't been updated either. Consequently, there is no DNG converter available at this time. We will have to wait and see what programs will be able to accommodate the D7200 when Adobe releases updates or upgrades that support the camera.

Photoshop :: Can't Open Latest NEF Files From New D610

I Can't Open Latest NEF Files From New D610.it can't open naturaly in photoshop CS6.

Have you updated Camera Raw, which exact version is it?
See this list to verify which version supports which cameras:
Camera Raw plug-in | Supported cameras

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

Problems opening & resaving NEF files with CS3/CS2

I seem to be having problems sending my NEF files to Photoshop from Aperture. This started happening just today & I'm not sure what to do.
What happens is that when I open a NEF file in external editor, instead of just opening up as a psd file in CS3 or CS2 directly like it used to do, it now opens Adobe Raw instead which means that I am unable to resave back into my Aperture Library. Is there anyone who has experienced this as well? Any suggetions as to the cause and a solution? I tried checking preferences for both Aperture as well as Photoshop but nothing seems to work.
The only thing I can think of is having just updated Adobe Raw to the latest version, 4.3 I think. Other than that Aperture did start up about a week ago & declared my library corrupt & proceeded to rebuild my library. Other than that it was behaving normally until today. Its really irritating & counter productive to be unable to resave my edits in Aperture.
Any help or suggestions will be very welcome indeed. Thanks in advance.

Thanks for the tip Eduardo, but I checked the preferences and they seem to be correct.
It seems that only images in certain projects were affected. Could be the ones that Aperture rebuilt earlier. I guess I may have to try exporting the raw files from the affected projects, then deleting and reimporting the projects again. I did try to rebuild the thumbnails but it doesn't seem to help.
Does anyone have any other suggestions for me to try before I do this?

Can't open an NEF file in PE 5

I took some raw (nef) photos with my Nikon D-80 and saved the files to my hard drive. They have a .nef extension. When I go to PE 5.0 windows xp version, and go to File, Open, and try to open the Nef file in the Editor I get a message indicating it is the "wrong type of file" and it doesn't open.
What am I doing wrong????

Bruce, you are quite on track.
Norman, PSE5 comes with Adobe Camera Raw 3.5. Support for Nikon D80 RAW
images has been added in version 3.6. You need to download and install it.
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows
Juergen

I can't open my NEF files D4 anymore in PsCC?

Since a few days i can't open my RAW files Nikon D4 in Pscc?

The Sony Alpha NEX-6 is supported since Lr 4.2.
Lr 4 or Lr 4.1 don't support this camera.
If you have Lr 4.2 or later, try this: use a card reader.

Can't open ABR brush file in Photoshop CS6. Any solutions.

Hello,
I downloaded a set of brushes as an ABR file, pasted it into the 'brush' folder in the 'presets' folder, but when I try to load my brushes I can't see any ABR files in my brushes folder.
Does anyone have any ideas?
I'd be so grateful if anyone can help.

If you are using Windows, did you place them in the 32 bit Program Files (x86) folder or the 64 bit Program Files folder?
Place them in here
C:\Users\Your Name\AppData\Roaming\Adobe\Adobe Photoshop CS6\Presets\Brushes
so both versions can see them.
Gene

Can you open/edit indesign files on CS3 that were created using CS5?

I recently bought indesign CS5 and am using this for my internship; however, my boss is still using CS3 and said she could not open or edit the indesign file i sent her. I looked under "export" to see if there was an option and did not find anything. I am using a mac and I believe she is using a P.C., also, when I last sent her the file, I was still using my free trial - does any of this make a difference? Please help!

This has been covered endless times but anyway, I'll do it again!
You have to export an idml file from CS5, then open that idml in CS4, export an inx file from there then open that in CS3 and save as an indd. Sorry but there is no way round it, fullstop, end of story etc etc. So if she is using CS3 and you're using CS5 there is no route between them unless you have CS4, and even then the route is littered with pitfalls! Look here for a rather long discussion / sometimes rant on the subject.
Ultimately she'd have to upgrade, or you could see if you could buy a CS3 or 4 version but it is very hard to get a legitimate copy, the only way is buy it off someone you know and most people aren't selling because they're upgrading.
Best news last, there is a short term fix, go to this guys blog and you can download a trial version of CS4 which will last for a month.

HOW CAN I OPEN A CS5 FILE TO CS3???

hi I been having this problem with most the files, i dont know why its so difficult if i am using the same program even though one is an upgrade than the other can someone please help!????

As Colin points out, backward compatibility is seldom going to work, or work well.
An alternate is to Export an intermediate file from CS5, to be Imported into CS3, and a new Project/Sequence.
Two schools of thought on doing so:
Edit completely and finally in CS5, as you will no longer have things like Handles, etc., in your newly Exported intermediate file. It will be hard to re-edit, but you can certainly do things like Titles, Audio additions, PiP and overlays.
Edit very loosely, leaving adequate Handles in each Clip, and NOT adding any Transitions. The tight editing would then be done in the older version, and Transitions, etc., would be added there.
I would look into a lossless CODEC, like the Lagarith Lossless, for the intermediate file. Note: it would have to be installed on both machines, and one would have to consider the 32-bit on the CS3 machine, and the 64-bit version on the CS5 machine. I do not know how well, or poorly, those might play with each other, but I am sure that others can direct you, or perhaps suggest an alternative.
Good luck,
Hunt
PS - I also think that you meant something different than "CS4 into CS4... " above.
PPS - It is usually easier going UP a version, or two, though even that can hold some problems, just waiting to strike.

How can I open a NEF-file(RAW) in the Photoshop Touch?

It is the most important question, if we talk about quick editing.

Hi Neprotiv,
Photoshop Touch does not support opening camera raw images currently. The maximum image resolution is 1600x1600 with up to 16 layers. The hardware capabilities of tablet devices still has a ways to go to be able to handle this type of editing for larger images. For quick editing (like global type adjustments, like you can perform in Adobe Camera Raw or Lightroom) I know RAW support is something on the roadmap for another app, Adobe Revel. See this blog post for more info
http://blogs.adobe.com/photoshopdotcom/2011/11/carousel_1_million.html
Thats not to say it won't or couldn't be available for Photoshop Touch eventually but I wondered if Adobe Revel might be a better fit for what you're looking for (even though its not availabe yet there either).
-Dave

I just bought a new Canon 50D but can't open my raw files in Adobe CS4 Bridge or Photoshop.

The files show up as CR2 files and I get a message saying "could not complete your request because it is the wrong kind of document. I run on Windows XP. I would appreciate your help.

what url?I dont know what you are talking about...
I posted the directions already about an hour ago.
Just for the heck of it: click on HELP and PLUG INS and see if CAMERA RAW is listed.
* I can almost guarantee its not even listed* but if it is, whatever, don't worry yet*
Here are the directions again.
download latest plug in for camera raw (go to adobe) go to DOWNLOADS
(go to downloads and it should be the first download they have listed)
save on desk top
open
click on the 'file' for Adobe (should be first icon listed)
then you need to put THAT PLUG IN
into your NON 64 bit PS
(it should be listed under programs as Adobe Photo Shop CS4 and Adobe Photshop (64 bit)
Click on START
COMPUTER
C Drive
Program Files
common files
adobe
plug ins
CS4
file formats
RIGHT CLICK ON PLUG IN
PUT PLUG IN ON DESK TOP *SAVE IT JUST IN CASE*
RIGHT CLICK ON PLUG IN YOU OPENED IN THE ZIP FILE YOU DOWNLOADED ON TO YOUR DESK TOP
DROP NEW PLUG IN IN FILE YOU HAVE OPEN
CLOSE
RE OPEN PS 32 BIT
AND YOU SHOULD SEE IT UNDER HELP/PLUG INS / CAMERA RAW
AND YOU WILL BE ABLE TO OPEN YOUR FILES JUST FINE
AND OPEN THEM IN BRIDGE TOO
If it doesn't work, I suggest calling me and I can help you. If you are worried about me having your number just hit *67 and then 1, and then my area code and phone number* I have no alterior motives as I was simply in the same boat you are in now and I am just trying to help.
The download is a simple download, but if you put it in the wrong file, you can REALLY mess up your CS4 capabilites. which is why I specifically wanted to help you and walk you thru it step by step.
I hope I didn't leave anything out. Like I said, easier to tell someone on the phone so I can hear what it is you are looking at on your system so I can walk u thru it is all.

I can't drag and drop files into a playlist. Any ideas?

As I often do, I went to drag four new files into a playlist in iTunes and suddenly they will not go in. I just get that circle with a diagonal line across indicating that this is not possible.
Lately iTunes has been giving me all sorts of problems such as not recognizing my iPhone or iTouch.
Has anyone else been having these sorts of problems??

Try to drag them directly to "Music" or "Movies" or whatever, rather than a specific playlist. THEN drag them to the playlist --
Given your other issues, sounds like you iTunes library might be corrupt...

Camera Raw 5.1 downloaded and unzipped but not working in CS4. Can't open Nikon D90 NEF files.

Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.

update the adobe program that needs cr 4.6+, http://www.adobe.com/downloads/updates/

Can't open d90 NEF files in CS3 or bridge. Any ideas?

Similar Messages

Maybe you are looking for