Can't open .gz files.

I've just downloaded SharePoints for my Mac (OSX 10.3). It's in a file called SharePoints351.dmg.gz
Normally, I just double click this type of file, StuffIt Expander opens and away I go.
This time, I get a message saying that the file doesn't appear to be encoded and that StuffIt Expander should be able to open the file, with two choices: "Don't Try" and "Try."
When I click "Try" it just pops up the same message with the same two choices.
I don't understand what's going on.
Sawtooth G4   Mac OS X (10.3.9)   1.2GHz upgrade, 1GB RAM

Hi troy,
Did you download it from this site?
http://hornware.com/sharepoints/
Try it again and see what happens.
John

Similar Messages

  • I can not open the file in Photoshop...

    I can not open the file in Photoshop after formattatto pc.
    I get the following error "could not complete your request because there is an error in the program
    Please me!
    Thank you

    Version CS3
    Adobe DNG Converter and Camera Raw 4.6 update
    6.2MB
    10/10/2008
    Camera Raw 4.6 update
    3.5MB
    10/10/2008
    Camera Raw 4.5 update
    3.5MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.5 update
    6.1MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.4.1 update
    5.4MB
    4/10/2008
    Camera Raw 4.4.1 update
    3.3MB
    4/10/2008
    Camera Raw 4.3.1 update
    3.3MB
    11/15/2007
    Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
    72.8MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.3.1 update
    6.1MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.2 update
    5.9MB
    9/13/2007
    Camera Raw 4.2 update
    3.2MB
    9/13/2007
    Camera Raw 4.1 update
    3.2MB
    5/30/2007
    Adobe DNG Converter and Camera Raw 4.1 update

  • I can not open adobe files. mainly ones that end in doc. I purchased the 19.99 to convert .doc files

    I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.

    Hi,
    Which Adobe Service did you purchased?
    If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
    Sign in with your Adobe ID and password, and then convert your word doc into PDF.
    Please let me know if that works.
    If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
    ~ Aditya

  • Can't open CR2 files in photoshop and camera raw

    This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
    I have:
    Photoshop CS4
    Camera Raw CS4
    Canon 5D Mark ii
    I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

    Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
    After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
    I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
    I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update )  this is the one for the Canon 5d Mk2
    After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
    This led me to the video.
    To the point.
    Download the update and save to a location where you will remember.
    open Adobe photoshop and go to "edit"
    Them " Preferences "
    then "General "
    Then " Plus-Ins"
    At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
    Shut down photo shop and try to open a raw.
    Bridge doesnt work for some reason but im going to keep looking.
    Hope this works for you as well.

  • Can't Open any files in photoshop CS3

    I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now

    reset the preferences per the faq?
    http://www.adobeforums.com/webx/.ef4a07f/1

  • Hi.  I have a Dell PC running Windows 7 64 bit.  I have the latest version of Adobe Reader,  It worked yesterday.  Today I have job training to do that is due tomorrow morning and I can't open PDF files.  I have to open a guide and read it and take a test

    Hi.  I have a Dell PC running Windows 7 64 bit.  I have the latest version of Adobe Reader,  It worked yesterday.  Today I have job training to do that is due tomorrow morning and I can't open PDF files.  I have to open a guide and read it and take a test tomorrow.  I have deleted and reinstalled the application.  I have rebooted.  I have made sure my PDF's are associated with the program.  Every PDF on my computer won't open and I get the same error message.  It simply says Attempt to access invalid address.  How can I fix this?  Thanks.

    Hi Don,
    I have seen this issue fixed for some users by modifying the following registry key:
    The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
    Set the key to 1 instead of 0 then reboot the machine.
    In case you still face the issue try the following registry key change:
    The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
    BEFORE:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
    AFTER:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
    Note: Please take a backup of the registry before attempting this change.
    Regards,
    Rave

  • OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

    Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
    the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
    I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
    files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
    sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
    and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
    It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
    Please help, this would make note taking so much easier.

    A bit of a confusion on my part;
    Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
    Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
    Now, looking at this paragraph:
    BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
    I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
    CRRedist2008_ia64.msi
    https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
    CRRedist2008_x64.msi
    https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
    CRRedist2008_x86.msi
    https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
    One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
    - Ludek

  • Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

    Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
    I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
    and will check online for solution. Please assist as no files will open now
    This is details of error
    Problem Event Name:    APPCRASH
      Application Name:    AcroRd32.exe
      Application Version:    11.0.10.32
      Application Timestamp:    547e9779
      Fault Module Name:    StackHash_147f
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Code:    c000041d
      Exception Offset:    77a011f1
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    1033
      Additional Information 1:    147f
      Additional Information 2:    147ff66574b08dc93180d912e60eb897
      Additional Information 3:    c48b
      Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Can you open Adobe Reader by itself?  If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

  • Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi

    I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
    I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
    I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
    The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
    In OS, when the image is selected no preview:
    Lightroom error:
    Bridge, no preview:
    Photoshop error:
    Ideas, suggestions?
    66 views on this discussion so far and no replies...
    Please help.
    Thanks in advance,
    Arthur

    Something appears to be wrong with your files.
    Are most of your images approx. 3.7 MB?
    This is very small for a 12 MP image.
    If you go back to the original file on your laptop, what is the file size?
    Also the fact that the Mac OS is not showing the preview is unusual.
    Perhaps these files got corrupted when they were moved to your new computer.
    Can you open these files OK on your old laptop?
    Is the OS showing the previews on your old laptop?
    Also compare the file sizes between old and new computer.
    Have you tried repairing your permissions?
    Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
    Good Luck!

  • I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing".

    I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
    Håkan

    Pages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
    After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
    Peter

  • Error message: "Dreamweaver can't open .jpg files"

    I'm using DW 8, and I have installed the 8.0.2 update. I'm
    having trouble inserting certain JPG images into a site. I get an
    error message pop-up that states "Dreamweaver can't open .jpg
    files". It will allow me to insert some jpg files, but not all of
    them. I've tried drag & drop and going through the Insert menu.
    The files are not large at all. Doesn't appear to be any problem
    with png's or gif's. It's incredibly frustrating. Anyone have any
    suggestions? TIA.

    > why was i taught that all my web images need
    > to be in 72dpi if it doesn't really matter?
    most people suggest 72 because it was an old standard with
    the early
    macintosh DTP programs. For web use it's easier to
    standardize on it because
    when you make an image, you have to put ~some~ number in the
    resolution box
    and it might as well be 72 as any other number. It simplifies
    moving image
    files around in different applications if they are all the
    same resolution.
    For display in a browser, these will all have the same file
    size and display
    size in a web page:
    600x600 pixels at 1dpi
    600x600 pixels at 72dpi
    600x600 pixels at 6000dpi
    It's when they are used in other applications or when a
    direct url like
    /photos/1.jpg is printed out that they may display in the
    resolution, not
    the pixel dimension.
    I came across a page once where the designer always saved his
    images with a
    resolution of 6000 dpi or some other odd number because he
    thought that if
    people dragged the image off the page to save it- most of
    them wouldn't be
    able to resize it. or some other idiot reason maybe.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Can't open .jar file, nothing happens when I click, MAC OS 10.6.8

    Hello,
    I can't open .jar file, nothing happens when I click on the .jar file.
    I have MAC OS 10.6.8
    The thing it, I have desktop application that I'm building on Netbeans and when I compile and deploy it... it runs from Netbeans folder where I have all the files but copying the .jar on the desktop. It says "The Java JAR file "blablabla.jar" could not be launched check the Console for possible error messages"
    Any idea or solution will be appreciated.
    Thanks in advance
    Charles

    These are Java files.  http://www.java.com/en/ is where you can get the latest Java for your operating system. If your Java files need an older version of Java, there are instructions on the web to downgrade Mac Java, but it is difficult, and poses security issues.

  • Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

    I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
    it gives error as "Can't open this file. There's a problem with file format".
    The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

    This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
    My files have to be compatible not just across readers but across operating systems.
    To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
    I personally test my PDFs using a variety of readers and PDF editors including
    PDF XChange (my favorite)
    Foxit (runner up for me and I recommend for most people)
    Adobe (the bloated monster)
    Nitro 9 (great for moving graphical elements around)
    ABBYY
    And the Nuance PDF Create toolsets
    Those are off the top of my head. There are a bunch on Android that I test with too.
    I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
    Here is what I've learned for my situation
    The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
    all fail using the built-in Windows 8/10 PDF reader.
    When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
    what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
    If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
    A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
    In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
     The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
    I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

  • Satellite Pro P300 - After Truesuite update I can't open protected files

    Hi,
    sorry for my bad english but I came from Italy and here we don't have any forum who can resolve my problem.
    I've got a Toshiba Laptop pro P300 with fingerprint reader. I use fingerprint to logon and protect some files, just for curiosity, it seemed cool...:|
    The problem born when I recently update "truesuite access manager". Since I did the update I can't open protected files, I didn't read that I have to remove the protection before the updating (damn...), but these files are important for me and I have to open them again.
    To resolve the problem at first I restore the system before the date of the update, to have the old version and open these files again, but all my fingerprints are deleted and I can't create new fingerprints because the pc says that it "can't open the sensor". I don't know what it means.
    I thought that it needs some drivers, so I reinstalled truesuite access manager several times, I reinstalled BIOS, I've done the scan disk and the toshiba diagnostic, but the sensor still doesn't work.
    I think that if I can save a fingerprint with the old version of the program I will able to open protected files again (and I will not protect them anymore) because only the old version of the program knows how to decrypt these files, but I don't know how to turn the fingerprint sensor on. Someone could help me, please?
    Thank you so much!

    The Truesuite update come from the Toshiba website. I can open the Truesuite program with my fingerprint but I can't decrypt files because it says that I don't have the correct "key of protection" or the "protection code keyAC 3000" of the file.

  • I would like to be able to edit MP4s in CS5.  I can not open the file. What am I missing?

    I would like to be able to edit MP4s in CS5.  I can not open the file. What am I missing?

    According to the publisher For GoSystem Tax, the 32-bit version of Internet Explorer 8, 9, or 10 is required.  Which means it can't be accessed from an iPad.  This seems weird.  I would recommend you contact the publisher.

  • I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix

    I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
    Why after 6 year's this has changed?
    I would like to open PDF's straight from Window Mail.

    Good day Jeff.
    I am running most current Adobe Reader X.
    Tks Mark

Maybe you are looking for

  • Excise details not maintained for import vendor

    Dear All, We have upgraded from 4.7 to 6.0 while doing import scenario we have error to maintain excise details for import vendor. Whereas we are not maintaining any excise details fro import vendor. Please guide me for above problem. Also I think no

  • Is their any way to downgrade from ios 6 back to ios 5.1.1

    is their any way to downgrade from ios 6 back to 5.1.1 i am not happy with ios6 its annyoing and so buggy i cant transfure music to my ipod and it laggs like ****! is their any way i can get it back to 5.1.1 i have a Ipod 4G (8Gb) i recently only got

  • Generation of WBS Settlement Rule

    Hi Folks! I was wondering if there is any function module that allow me to generate a WBS Settlement Rule for a specific project and for elements on level 3. If there is no FM for this, is there any workaround to do this. Thx for any advise. Regards,

  • Boundary lines showing in PDF

    I hope this is the right place to post this. If not, would someone tell me the best forum on which to post it? Some of my finished PDFs have boundary lines showing around--or sometimes even within--text boxes filled with color. The files were created

  • License question: My desktop and my laptop

    Hello! As I understand it, Adobe allows for instillation of their software on two machines, along as the software is not used concurrently. I'm getting a laptop for Christmas, and would like to load my copy of Final Cut Studio 1 on the laptop. Do you