Can't open iTunes-getting error (-3212)

I just used iTunes w/i the last week. Opened iTunes yesterday & it gave me a box that read "iTunes could not connect to the iTunes store. An unknown error occurred (-3212). Make sure your network connection is active and try again." My brand new iPhone (as in yesterday) was plugged in the usb when I got this error. I closed the box & tried to open the iTunes store & it would either give me the error or it wanted my password which I have not had to enter before because it was saved. I don't remember my password, don't use the old email it was created under & I have locked myself out trying. I am going insane because I am clueless what has happened. Anyone have any ideas?

Kept searching discussion board & found solution. McAfee for some reason changed firewall access to blocked. Changed to full access & iTunes now opens with no problem. Next issue is password problem. Still need to figure out what to do there.

Similar Messages

  • Can not open iTunes, get error message 126

    Unable to upgrade iTunes to lasted version.  Got error message about a missing file.  Tried to uninstall and reinstalled, after deleting Temp folder from C drive, but still get error message 126.  Can anyone tell me what I need to do?

    Hello mvguillet,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • CAN'T OPEN iTunes, get message "can't open Error (-50)?

    Can't open iTunes, get error message (-50)?

    The 50 when launching iTunes can indicate a damaged Apple Application Support. So first I'd try a Repair install of your Apple Application Support.
    Restart the PC. In your Add or Remove Programs control panel, select Apple Application Support, click "Change" and then click "Repair".
    Does the repair install go through okay? If so, does itunes launch without the (-50)?

  • Cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I have open office.  Someone sent me e-mail I can't open.  get error message power pc no longer supported.  How do I open this doc?

    I have open office.  Someone sent me e-mail I can't open.  get error message power pc no longer supported.  How do I open this doc?

    Right click your document, hover over "Open with..." and then click "Other".
    Find TextEdit and click "Open".
    TextEdit will then do it's best to open your document.
    If you have iLife, do the same but instead of opening with TextEdit open with Numbers, Pages, Keynote, e.t.c.
    To download iLife, click here.
    If the above link does not work, click here.
    -----EDITS-----
    Added "If the above link does not work" at the bottom of the post.
    <Edited by Host>

  • Just downloaded 10.6 and cannot open itunes get error:ITunes Library.itl cannot be read because it was created by a newer version of iTunes

    Just downloaded Itunes 10.6 on windows7 64bit and now cannot open Itunes get error msg:ITunes Library.itl cannot be read because it was created by a newer version of iTunes.Tried uninstall and reinstall any help ? Thanks

    Even I am facing a similar problem. Initially the iTunes worked on my windows 64bit edition. Ever since I downloaded the latest version it has stopped identifying my 4S with an error msg that asks me to download the 64bit edition. I have tried it again and again but it did not help. After unistalling and downloading again the new error msg says " the file- iTuneslibrary.itl cannot be read because it was created by a newer version of iTunes". Please help!!!!!!!

  • Can't open iTunes.  error message: MSVCR80.dll is missing

    Can't open iTunes.
    Get error message that MSVCR80.dll is missing.  Try reinstalling.
    Tried reinstalling.  Same problem.

    iTunes for Windows: Missing MSVCR80.dll

  • Open itunes get error message, can't find iTunes folder! & doesn't open!

    Hi, I have Downloaded iTunes but it some how has installed itself onto a USB pen drive that I had connected at the time. I have unplugged this and downloaded iTunes again...which seemed to go ok but when I click the iTunes icon an error message appears ' Cannot find iTunes folder, this is normally located in the My Music Folder' and will not open iTunes. I plug the USB pen in and it works fine! I have tried to copy & paste the files on the USB pen but it doesn't copy them properly...can anyone help?

    Hello mvguillet,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • So, I can't open iTunes - get a WerFault.exe - Application Error

    OK.  Two days ago, iTunes worked just fine.  No updates between then and now.  Nothing new installed on my computer.  I tried to open iTunes today to listen to my music, and get this:
    It pops up at least 3 times, and one time somewhere areound 15 or 20 times, and iTunes doesn't open!  I am a certified computer tech, so went through all the troubleshooting I know - even redownloaded iTunes, ran it, and choose to "Repair" iTunes.  I even removed iTunes and completely re-installed it, and it STILL does it!  What the **** is going on?

    ...the screenshot didn't stay there... the error window has the following:
    WerFault.exe - Application Error
    The instruction at 0x703120e0 referenced memory at 0x8ead6a78.  The memory could not be written.
    Click on OK to terminate the program.

  • Can't open iTunes, no error message

    I have the itunes icon on my windows but when I open itunes it will pause for a bit with the hourglass thing and then nothing. I looked in my task manager and it doesn't show anything running. I don't get any kind of error message, any ideas???

    Does Quicktime work, if not does it give an error message.
    If quicktime works then:
    A couple of things to try, spyware can sometimes do this so do a scan. There is a free spyware scanner here:
    http://www.ewido.net/en/download/
    Then take a look at this article on troubleshooting launch problems.
    http://docs.info.apple.com/article.html?artnum=302856
    I would start with the bit about digital signing at the bottom as this can cause error message free failures.

  • Can't open iTunes- Runtime Error

    I have recently been trying to open up iTunes, but I can't. I get an error saying...
    "Runtime Error!
    Program C:\Program Files\iTunes\iTunes.exe
    This application has requested to terminate it in an unusual way.
    Please contact the application's support team for more information."
    Is there a way to fix this? Thanks
      Windows XP  

    Try uninstalling and reinstalling iTunes.
    Try this article: http://docs.info.apple.com/article.html?artnum=93698

  • Can't open PDF, getting error message

    i have worked on a pdf document which has been sent to me to fill in. i have filled it in and saved a copy and now when i try to open it i get the following message.
    'This document enabled extended features in adobe reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document.'
    This has happened twice now on the same document, what does it mean?

    Hello Pranavj,
    First - sorry if I am violating rules - posted this same question to another thread that showed the same error message.
    I am getting the same message with a file I JUST got off IRS website. 
    It is the 2011 Form 8829. 
    I get the error when I double click on IRS link or try to open from local copy.  I can not open it from the web browser or from my local drive after saving it.   Nothing shows - I am never able to view the document - I have NOT made any changes to it.
    I am running Windows 7 64 bit, Adobe Reader X version 10.1.4.
    After trying to open the doc (nothing displays) I go to properties, and it says ...
    Title: 2011 Form 8829
    Author: SE:W:CAR:MP
    Created: 12/23/2008P
    DF Producer: Adobe LiveCycle DSesigner ES 8.2.
    PDF Version: 1.7 (Acrobat 8.x)
    Tagged PDF: No
    Fast Web View: No
    I desperately want to fix this as I have 9 days before IRS sends troops to my house.

  • TS1368 Can't access iTunes store - error -3212

    Just installed new version of iTunes but now can't access the store because of 'error -3212' - although my internet connection is fine. How can I fix this, please?

    Try this:
    1. Go to Settings>General>Date and Time>Set Automatically>Off
    2. Set the date ahead by a few months
    3. You should then be able to connect to the store

  • Can't open firefox, get error message: The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read". Firefox won't open at all, not in safe mode or anything. Tried uninstalling and reinstalling, no good, tried creating

    Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
    == This happened ==
    Every time Firefox opened
    == today. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

    The solution is easy.
    Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

  • Can't open iTunes - has error message - Hope someone might be able to help

    I had everything working about two weeks ago. I was able to download my CD's on the Nano.. Then my computer had to be reloaded with XP.. Lost iTunes..... I reinstalled it at least three times, but it will not work, even downloaded the new edition.....comes up with the following:
    iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. Etc....
    What am I doing wrong? Please advise if you have had the same problem..
    Thank you.

    Itunes has encountered a problem and needs to close
    the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
    try to open your QuickTime. does it launch properly, or do you get an error message?
    if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Maybe you are looking for

  • Why is a pdf created by PDFScanLib v1.2.2, so much smaller/higher quality than one made in Acrobat?

    I'm currently scanning documents at 600 dpi, compressing to jpeg, and creating PDFs from there. Pdfs are usually 20-30 pages, and are about 20mb. After OCR, and reducing the jpegs to 400dpi, I can get the file size down to about 11mb. However, some p

  • Monitoring FCP through a LG HD Monitor

    Hi All. My company recently replaced our old SD broadcast monitor with a LG HD TV monitor. To save money we ordered it from Best Buy. We also started shooting and editing with P2 footage. After the footage is logged and transferred and in the project

  • Variable.extend in pl/sql

    if l_max_date = to_date('01-01-1900', 'dd-mm-yyyy') then p_tax_id.extend; p_tax_desc.extend; p_effective_date.extend; p_tax_rate.extend; p_tax_id(1) := 0; p_tax_desc(1) := 'ENT'; p_effective_date(1) := null; p_tax_rate(1) := 0; This is one part of pl

  • Problem with printing ical

    When I go to print an ical sheet showing a month plan the start of the week day moves back one day. My default in preferences is that Monday is the first day of the week but this changes to a Tuesday when I go to print. Help welcome

  • Send as... in Application ignores format settings

    Hi, using gw client 2012 sp2. Settings in options - environment are simple text on create and read (old school, mails are text only) But if I send a document, excel sheet or pdf from applications file menu via "send as...", gw´s send dialog windows a