Can't open my file after saving.using labview 8.2.1

Hi there, after saving my program, i can't access/ or open my program again, but my subVI can be open, this puzzled me. Can anyone help me with this. i have attach the program,. it also prompt me (this resource you are attempting to open was created in a more recent version of labview and is incompatible with this version). And my Uni is using labview version 8.2.1, no other version.thanks alot
Regards:MKK
Attachments:
cyclodrive combination programme.vi ‏87 KB

I can't open it either...
You should always keep back-up....

Similar Messages

Can't open PSD files after saving them

I haven't ever had this issue before and now have had it twice in the last week or so. I scrap all the time and now after saving the file as a PSE, when I go to reopen from inside Photoshop Elements 7, it's telling me it can't be opened because it's not the right type of file. Any suggestions. I am using Vista but of course have been using the same computer with no problem up until now.

I figured it out myself. Both files I could not reopen were named for teachers. So they were Mrs. so & so. The period in the file name was causing it not to be saved correctly I suppose. When I restarted the Layout again and saved it, I saved it without the period and then no problem at all. Just wanted to let those reading know...

Can't open excel file after saving and closing excel with activex

I'm using activex to write and save excel files in LabVIEW. My application opens excel (not visible)writes a file, saves it, and then closes both the file and excel. When I try to open the file Excel opens but the file is not displayed, I see the excel header and footer but the file itself does not display. My application is still running at this point. Any suggestions?

It is critical when using ActiveX with Excel that ALL refnums be properly closed when they are no longer used. Just a single refnum left open will cause the exact situation that you describe. Typically, but not required, the refnums will be closed in the reverse order in which they were created. Here is a good sequence:
Open Application ref
Property Workbooks ref
Open Workbook ref
Close Workbooks ref
Select Sheet ref
Select Range ref
Write Value2 to Range
Close Range ref
Close Sheet ref
Save Workbook
Close Workbook ref
Close Application ref
When you have properly closed all refnums, the problem will disappear.
Michael Munroe
Certified LabVIEW Developer
www.abcdef.biz
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Can't open Numbers file after moving it back to Mac from Dropbox

Please help! Can't open Numbers file after moving it back to iMac from Dropbox. Says I need the newer version of Numbers each time I tried to open the file. I am 100% sure that I had the newest version. Spoke to the AppleCare guy and after doing the checks he is also sure that I had the latest version of Numbers and AppleCare can't help. He suggested that maybe i should run it on a file repair program...any suggestion?... please help...

I've read reports of people having trouble when storing Numbers 3 documents on Dropbox. I think it's related to the fact that they're not really "files." They're "packages" that look like files. I had thought that Dropbox had cleared this up with their latest update. You should be on Dropbox version 2.4 or later.
If you have Time Machine you may have some luck going back in time and restoring the document from a previous version.
Storing Numbers documents on iCloud works much better, at least for me, and (unlike Dropbox) iCloud facilitates automatic syncing to other Macs and iOS devices signed into the same Apple ID.
Perhaps you could consider keeping Numbers documents in iCloud instead. iCloud is deeply integrated into the app, and now works well.
SG

Can't open keynote file after upadating to 1.3.1 !!

I have error opening keynote file after upgrading 1.3.1
strange thing when i updated keynote to 1.3.1 was that the stripe above the screen changed to dark gray to white!
I thought that was new interface but suddenly it has error opening the file.
So i tried to open through webDAV, itunes, but after downloading the 180mb file of keynote, it shows that it has errors for opening files!
this backup keynote file worked just great on 1.3 vers.
http://dl.dropbox.com/u/10521896/NY%20Branch%20Report.key
is the file,
would you plz test the keynote file, which was working just great before bringin he

I tried your file on the iPad and Keynote crashed. Then I transferred the file to my Mac, opened it in Keynote on Mac, saved it, and synched back to iPad. Now I can open the file on the iPad -- it takes some time due to all the images. Also, here are some delays between the slides when presenting on the iPad.
BTW: Make sure to use the latest version of Keynote on Mac (5.0.5).

Some clients Can't open XLSX files in Libraries using template.dotx but can open xlsx files in libraries using template.doc

If I create a new library using any Excel/Word template - DOC, DOTX, XLS, XLTX and then upload a XLSX document (or docx) then some of my clients experience issues opening the document. My work around in the past has been to resave the document
as XLS or DOC. Interestingly Old Libraries (Libraries using template.doc) don't have a problem with xlsx or docx documents. (This only works because most of the clients experiencing the problem only open a few documents and we only have to
resave a few documents. I don't know why these clients have this problem though.)
We are now testing a new Terminal Server implementation. One with OpenOffice instead of Microsoft Office. We can't open xlsx files on new libraries but can on old libraries. (docx files are not a problem though) I found a couple of
work arounds.  One work around is to click on the down arrow by the document name and select "Edit in Excel" which fails, but then clicking on the document name after will then prompt you to Open/save the document. Clicking on Open
successfully opens the document in OpenOffice. (So rather tedious for the users but nothing has to be changed to make it work.)
The other option is to create a template from one of the libraries that is working and then use it to create a new library and save my documents to the new library. Then I'm prompted to Open/Save the xlsx documents in the library.  This
option is less tedious for the user but then I have to go through and recreate any libraries using template.dotx. Creating a new library using the standard Document Library option and selecting Word or Excel 2003 does not resolve the issue - it has to
be created from a template created from an existing library that works in the Terminal Server implementation.
My boss is opting for the latter option unless I can come of with an alternative that doesn't mean additional steps for the users. Training is an issue because most of the Terminal Server users are shop floor workers.
My question is, is there a patch or fix that addresses this issue or any other work arounds that would be less work?
Additional Info: Our Sharepoint implementation is the Enterprise version is installed but we do not have the Excel related Features activated (and these can't be activated due to licensing). I'm not sure if that matters or not but it is
a different configuration from how most SharePoint installations are configured. SP1 is installed. I have not installed any recent CU's. Versions I see in Patch Status screen include 14.0.6029.1 (primarily) with some additional features
reporting 14.0.6105.5, 14.0.6107.5, 14.0.6112.5 and 14.0.6114.5.
Nancy Forbes

We have tried a couple of additional things.
We uninstalled OpenOffice and are testing LibreOffice. I also installed CMIS from the SharePoint Administrator's toolkit, added the solution, and deployed it to my sites. The "Producer" feature is activated on the site I am testing with.
I created a new library and posted some docx, doc, and xlsx files to it. All files can be opened as Read-only from the Library list. The only way I have found that I can edit the files is to Open the Library with Explorer.   I then deactivated
the producer feature and tested opening the SharePoint documents from Explorer and it worked the same.
So am I misunderstanding what the CMIS Producer feature is for?
Nancy Forbes

My Safari can´t open .dmg files after downloading

I updated to Mac OS X 4.9. But since this update, Safari cannot open .dmg files after downloading! On 10.4.8 it was not a problem. What can I do?
eMac G4 PPC Mac OS X (10.4.9)

Darn...I thought that would do the trick.
Given the other problems you mention, more and more, it seems a reinstall of the OS, using Archive and Install is going to be necessary. Have you ever done an Archive & Install of the OS? Important you carefully read the description of the process. If you are uncertain, I find the Take Control Upgrading to Tiger E-zine to be a very helpful guide.
Once you reinstall the OS, then you can upgrade to 10.4.8 using the combo update, repairing permissions via Disk Utility in your Utilities folder when complete.
One question: Not sure why you have run into all these problems on the 10.4.9 upgrade. It worked without problem for me. Anything unusual happen during the install?
Message was edited by: Hawaiian_Starman

Can't open project files after upgrading to FCE 3.5.1

I bought a new MacBook Pro and sold my PowerMac, so I bought the 3.5 upgrade to FCE. I was using 3.0 before on my PowerMac.
I copied my project over, but when I try to open it it just gives me a dialog box with "General error" and an OK button.
How do I get my project open???

Make sure you have the latest version of Quicktime
Quicktime is up to date.
I solved the problem with the help of Tom Wolsky. What finally worked was taking the project file to my wife's C2D iMac, opening the file there, saving it as a 3.5.1 file, and copying it back to my MacBook Pro.
The weirdest things to me are:
1) That there was any problem at all to begin with on my MacBook Pro C2D
2) That there was no problem on my wifes iMac C2D
3) When Tom Wolsky opened and saved the file in 3.5.1 format for me it didn't work, but that worked when I did the same thing with my wife's machine.

Help - Can't open Adobe files, after expiration of Adobe pro free trial

I had a 30-day free trial of Acrobat 11 Pro, since the free trial expired a few days ago I can't open Adobe files. When I try to open them a pop-up box appears telling me to buy Acrobat 11 Pro...when I decline, it automatically closes Adobe
I want to read files with just basic Adobe reader (not Acrobat 11 Pro) and I don't know how to make it my default
Do I need to purge Acrobat 11 Pro? (I'm using Microsoft OS)
Thanks!

Use the Adobe Cleaner to remove Acrobat and Reader COMPLETELY: http://labs.adobe.com/downloads/acrobatcleaner.html
Download the offline Installer to reinstall Reader: http://get.adobe.com/reader/enterprise/

CS6 Can't Open/Create Files after a period

I've seen several threads around for a issue the same as this (None with anything useful) and seeing as i can't really see how to explain it, i'll use Coestar's Video:
http://www.youtube.com/watch?v=3Ehx9cFyw7A
Which shows the exact issue i'm having, the only difference is that I'm running CS6 Extended.
The Problem is not always present, sometimes happens on first launch, sometimes after a few hours use.
If it does happen during use ussaly apart from not opening files some tools will act weird like brush strokes going down but disapearing on release of the mouse button...
I've spent the last few days searching the web, these forums and such for a solution but haven't found one...
What i've tried to rectify this:
Reset Preferances
Buying a key and reinstalling... (The issue Appeared on a trial version and hence due to use of the program and the error i bought a key...)
Reinstall Photoshop
Remove Third Party Plugin (Nvidea PS Plugin for Normal maps, ect (The issue started long after this was installed))
Update Nvidea Display Drivers
Update from 13.0 to 13.0.1
Changing to a Larger Scratch disk
resetting Workspace (someone claimed this fixed it for them)
Disabling Anti Virus (Avast!)
Disabling Plug-ins from running on start up (Both through keyboard command and through renaming the plugins folder)
Changing the Default printer
I've contacted the 'Australian' (which actually seemed like a Redirect to another country, but i digress) Customer help desk to no avail, the technical Chat online to which they stated "Come back in 2 hours when the PS team is on" which i'm currently waiting in que for now...
Honestly i doubt anyone i'm contacting on Adobe's side can help, less they be a programmer on the PS team... :/
DxDiag: http://pastie.org/5927099
PS SysInfo: http://pastie.org/5927282#
Message was edited by: Scarecrow398 (Added more details)

Something quite curious just happened, i started without my drivers/utillitys nor steam, started regular programs one by one slowly over time to notice any differnce while doing work and saving every now and then, now at the time i had Teamspeak, Texview 2 (a texture viewer for games), Skype, Nvidea drivers, firefox and adobe updater and CS6 Services.
Now the thing is i was working for around 2 hours with all of this open with no issues, as soon as someone on teamspeak asked me to plug in my headset and talk is buggered out in the time it took to stand up, plug in the headset, sit down, say hi and do a couple of brush strokes, after that i couldn't open a new file, save or use many tools.
My headset is ussaly pluged in most of the time, hence i didn't make hte connection until now when i tried without it.
Unplugging it didn't help at all in solving the issue, it continued on, i assume a restart will probably fix that.
I'm using a Corsair 1500 USB headset and the only keys i hit in photoshop after plugging it in was left click for the brush, shift for a stright stroke and scroll lock (Teamspeak Push to talk key).
I'll do some more checks over the coming day to confim it.

Can not open psd file after electricity failure!! help""

Please help me how to open psd file. I have been working on one project. It has been saved. After that electricity failure in our house happened and now I can not open it. It is saying: Could not complete your request because the file is not compatible with this version of Photoshop.
Thank you for help.

Have a look at this:
Salvaging damaged PSDs
Mylenium

Can't open Keynote files after last update. I created the files with Ipad 2, the same Ipad which won't open the files now. No Mac involved. What can I do to habe access again?

Can't open my Keynote files after last update on Ipad 2. I created the files on the same Ipad. No Mac involved. What can I do to open and use the files again?

Finally, this helped me:
https://discussions.apple.com/message/23602871#23602871

Can't open PSD file after reinstall windows 7 64 bit

After reinstalling windows 7 stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what the problem is. And how to fix it.
Thank you.

Perhaps these files were corrupted. I can not say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?
If so, it is quite rare in my opinion. You are very unlucky. Try reinstalling photoshop. Then check these files were opened or not. If not. Then the only option is a special software. I would use on your site this program
http://www.photoshop.recoverytoolbox.com/
(it is not free but is very good and is not expensive. But in the future you will immune from such situations. )
As well you can learn more about your problem here:
http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-through-photoshop

Can't open iMovie files after they are save to my external firewire HD

I am using a MacBook Pro for iMovie. Because I was running out of HD space, I started saving files onto my external Maxtor 250GB HD. The files are saving fine, but when I try to open the files through the external HD, nothing happens. Any suggestions?

Hi Pancho 1 - you should have no trouble working on
an imovie project that is stored on your external
drive. The problem could be a wrongly-formatted
drive. It should be Mac OS Extended, not formatted
for a PC. You can check this by Control-Clicking its
icon, and then clicking 'Get Info'.
The format can be changed in Disk Utility, but note
that you must firstly store important files
elsewhere, as re-formatting erases the disk.
<img
src=http://www.PhotoShare.co.nz/PhotoShareGallery1/101
179/105678/MyPawAvatar261.jpg alt=”” width=”30”
height=”30”>
Thanks!
Pancho

How can I open my file after 'cannot find -filename-' error message?

OK, the bottom line is, InDesign crashes and I cannot recover my file. I get a 'Cannot find file' error message when I try to open the file.
I am using CS6 on a MacBookAir, OS X Yosemite.
I have tried finding the 'InDesignFileRecovery' folder, I cannot find it anywhere, it's not in my Library or Caches folder.
However, I do work in dropbox, so I just headed over to dropbox to recover from their 'previous versions'. It starts to get weird. There are lots of previous versions (I save very regularly) but when I download a previous version (that I know was fine) it downloads with a indd.txt extension. So I remove the txt extension and keep the indd and everything looks fine, but then that recovered file gives the same message. I tried renaming the recovered file and opening that, same 'cannot find file' error message.
I can open InDesign and open the file from the day before, but none of the dropbox earlier versions of that day's work. I am SO sick of this happening. It happened to me last week to, so far I have lost 20 hours work :-(
I have tried quitting InDesign and restarting the Mac, doesn't help. The only thing I can think of is to 'save as' every couple of hours, at least then hopefully I only lose 2 hours work.

Thanks, when you say 'hidden by default' then how does one find it? I have already tried the path you mention and there is no sign of a cache folder with Adobe files. Spotlight doesn't reveal anything either.

Can't open my file after saving.using labview 8.2.1

Similar Messages

Maybe you are looking for