Can't open print & fax preferences, can't print

I know I've read about this problem before, but I can't seem to find the thread. I'm a total novice when it comes to terminal, but I don't even know where to start. Whenever I try to print, or even open print & fax, I just get the spinning wheel. I'm using Leopard on a 17" MBP, and I'm set up on a network with several printers (I can't even open the individual printers...everything related to printers or printing just freezes!!)
Any help is much appreciated!

I think I have bigger problems here...
I think you may be right.
Have you installed anything recently?
Open up Console.app and see if there are any messages that repeat regarding the crashes.
How much free space do you have on the disk?
You can get into the CUPS web config through http://localhost:631
I couldn't find anything like "Reset Printing System," but you can view the error logs (which you can do from Console.app), and edit the Configuration file. There is a button to use the Default configuration, but I don't know what that will accomplish. Might be the last ditch effort before reinstall.
EDIT: From About the Reset Printing System feature:
What does Reset Printing System do?
Deletes all printer queues and jobs.
Resets all printer settings to their default by deleting configuration files.
Performs a permissions check on the /tmp directory.
1) Can do that from CUPS interface
2) Noted above
3) They should be rwxr-xr-x root:admin
Message was edited by: Barney-15E

Similar Messages

Can't add a printer in Print & Fax preference

I was having trouble with my printer resource for my HP Laserjet 6MP, which had been working fine until this week. In print preferences, I deleted the printer, and another one for good measure. When I went to add new printer, there were no printers to choose from. I reset the printer resource (many times!) restarted the computer (many times!) turned off and on the printer a few times, tried everything again, but still no printers to choose from.
I downloaded the printer resource from this website, http://support.apple.com/kb/DL907and tried everything again, all the steps I tried before. Still no luck.
I think the Print & Fax preference might be trashed. How do I replace that?
I should add that I am not using the printer on a network, but directly from my USB. I am networked only through wifi to my internet modem. I know 10.6.8 sometimes has network connectivity issues with printers, but I'm not sure that's the cause of this, as I have been on 10.6.8 for awhile.
Thanks in advance for any advice. You rock!

Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

Can't open Security & Privacy preference pane?...please help.

Hi All,
I would be grateful if anyone could assist... I can't seem to open the security & privacy preference pane. I receive the following "Preferences Error" upon trying to click the icon in my system preferences:
First click: You can’t open Security & Privacy preferences because it doesn’t work on an Intel-based Mac.
Second click: Could not load Security & Privacy preference pane.
I noticed the issue this past week when I installed some monitor callibration software. After downloading, the software's interface text did not load (it was simply blank for the drop down menus). The manufacturer tried to help me by clearing font cache and such, but that was not the issue. When he next directed me to the S&P pane, that's when I noticed I couldn't open it to adjust anything.
* I did go into Users & Groups and created a new admin user. I was then able to open the Security & Privacy pane, and load the monitor calibration software without any problems, so it seems to be a user issue I suppose? Tried to trash some security preferences, reinstalled 10.8.2, but with no luck.
Thanks for your assistance!

Try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This does some maintenance routines and 3rd party applications don't load. Sometimes 3rd party applications are the problem. If your normal user account works in Safe Mode, it is probably a 3rd part application.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

Safari will no longer open. I was using firefox until I could find a fix for safari. I made the mistake of changing my default search to firebox later for convenience and now I can't open my system preference or many safari or apple linked files.

Safari will no longer open. It just goes back to my desktop. When I right click on the safari icon in my dashboard it says it is open. I was using firefox until I could find a fix for safari. I made the mistake of changing my default search to firebox later for convenience and now I can't open my system preference or many safari or apple linked files. Some of my emails from trusted sites won't open and does the same thing.
I upgraded my original system from 10.4.11 to I believe 10.6. something about a year or so ago. I thought about re installing my safari app but when I go to open anything connected to safari my screen goes back to the desktop. I cant open any files that I have on my desktop that I set up through safari, like my banking program. Prior to changing system preference to safari default I was able to open those files and now I can't get into change it back. Can you guide me through this?
Thanks,
Betty

Try running the 10.6.8 combo update.
10.6.8 Combo Updater
System Preferences or Safari Preferences?
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. Select Library. Then go to Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.

Why can I no longer fax from my 7515 printer or from my desktop or laptop?

Why can I no longer fax from my 7515 printer or from my desktop or laptop?

Hi @Vickile
Welcome to the HP Support Forums. I understand that you are unable to access the eFax on your Photosmart 7515 printer.
I have included a link to a post by @PrintApper regarding eFax titled eFax users - please read. It has the information regarding the eFax feature.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

You can't open Dictation & Speech preferences because it doesn't work on an Intel-based Mac.

I cannot open or use Dictation & Speech in System Preferences. When I try to open it I get the error:
"You can’t open Dictation & Speech preferences because it doesn’t work on an Intel-based Mac."
I have tried repairing the disk from the installation CD and repairing the permissions and I have also tried re-installing Mountain Lion but the feature still does not work. Any ideas?

Open Finder, press Option key and select Go > Library. Open Preferences and delete com.apple.systempreferences.plist. If you can't open, do a backup, format and install

I delete my print & fax how can I recover that

I delete my print & fax how can I recover that

If you are using Snow Leopard, manually download and install the 10.6.8 Update Combo.
Mac OS X v10.6.8 Update Combo v1.1
http://support.apple.com/kb/DL1399

Why I Can not Open a safari preferences,

Why I Can not Open a safari preferences,
I not even able to write a web address. My home page is aol I have to search to be able to open a web page
everything starts after I Update my computer to OX X Yosemite
Can Someone help me

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take the action that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Managed Printers Don't Appear in Printer & Fax Preference Pane

Something curious to ponder. I've had this issue for a while now (though it's not a huge problem), where I have a managed Mac (managed via Mac OS X Server 10.6.8) that doesn't display the printers that have been added to a computer list via Workgroup Manager in the Mac's Printer & Fax preference pane. The printers do appear in CUPS (127.0.0.1:631), and the computer prints fine to the available printers, but they just don't appear in the preference pane. I've attached some screen shots for clarification.
Computer list in Workgroup Manager
(even with the Only show managed printers option unchecked, nothing shows up in Printer & Fax)
CUPS page on managed Mac
(All printers show up fine here)
Print & Fax Preference Pane
(Printers don't show up here, why not?)
Print dialog box in Safari
(Printers show up here)
Any ideas?

John Baughman wrote:>
It is as though Bonjour services are not functioning properly.
Thank you.
What happens if you start some type of sharing on the "problem" computer - iTunes Library sharing, File Sharing, or Screen Sharing - can the other 3 see what has been shared?

"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

this just started w/ me yesterday. I was running 10.5.3, and nothing changed - the message just appeard out of nowhere. I update to the latest iTunes 10.6 but the message is the same.
Sounds like probably some sort of Library file corruption.
The two options available in the message box are "Download" and "Quit". Download is useless because I'm already running the latest. Quit is pretty useless.
I was going to just create a new Library and re-import all my music. Of course, all my iPhone sync settings are going go have to be recreated.

Can not open JPEG files and can not create JPEG files from other software

Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
is created (I can see its name in the directory I created it).
I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
I will appreciate your assistance.
Avi T. 2014

Hi,
Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

I can't open iTunes message says" can't read itunes library.itl because it was created with a newer version"

I can't open iTunes message says" can't read itunes library.itl because it was created with a newer version" thank you for any help!

My ipod did that all day yesterday then went into lockdown ! now the dam thing wont do anything !!!! its stuck in download mode!!!!!!!!!

HT201364 I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either

I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?

Download the iPhoto upgrade from the App Store. It should be free.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

Can't open the illustration. Can't finish previewing. Could not complete the requested operation.

Recently, I restarted my MAC and I'm not able to place images in AI or open AI files with images.
Sometimes when I do place a jpg, it just shows a box.
Some errors include:
• This file is not readable.
• Can't open the illustration.
• Can't finish previewing. Could not complete the requested operation.

As Monika said, we need info about the file and exact system info. Sounds like the files are damaged or locked at the operating system level, which in turn could indicate file system issues....
Mylenium

Windows\system32\QUARTZ.dll can't open in Windows. Can't use Premiere Elements.

I am looking for a way to get a solution to this error which keeps preventing me from opening my Premiere Elements 11 program. I have previously used the program without any problems. But last week I had a new HDD installed in my laptop (Dell Studio XPS 1640 running Windows 7 Ultimate 64-bit). Now I can't open Premiere Elements and can't edit my videos.
When I try to open the program, I get an error which reads:
Font Capture: Adobe Premiere Elements.exe - Bad Image
C:\Windows\system32\QUARTZ.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original instalation media or contact your system administrator or the software vendor for support
My computer technician did use an image of my laptop to transfer everything onto the new HDD. I have no idea if that is relevant to this software problem.
I posted this question previously and was directed to a link which instructed me to update my DirectX and other graphics drivers. I did all that already. I still can't open Premiere Elements. I want to ask Adobe Support, but since they just launched Premiere Elements 12, I guess I no longer get direct support from Adobe? Not sure but that is how it seems to work. I will try any advice given to resolve this issue, if anyone has ideas.
Thanks!
Janeen

Did you try reinstalling as indicated by the error message? Transferring images is not a good way to install Adobe programs.

Can't open print & fax preferences, can't print

Similar Messages

Maybe you are looking for