Can't open PSD files after saving them

I haven't ever had this issue before and now have had it twice in the last week or so. I scrap all the time and now after saving the file as a PSE, when I go to reopen from inside Photoshop Elements 7, it's telling me it can't be opened because it's not the right type of file. Any suggestions. I am using Vista but of course have been using the same computer with no problem up until now.

I figured it out myself. Both files I could not reopen were named for teachers. So they were Mrs. so & so. The period in the file name was causing it not to be saved correctly I suppose. When I restarted the Layout again and saved it, I saved it without the period and then no problem at all. Just wanted to let those reading know...

Similar Messages

  • Can not open psd file after electricity failure!! help""

    Please help me how to open psd file. I have been working on one project. It has been saved. After that electricity failure in our house happened and now I can not open it. It is saying: Could not complete your request because the file is not compatible with this version of Photoshop.
    Thank you for help.

    Have a look at this:
    Salvaging damaged PSDs
    Mylenium

  • Can't open PSD file after reinstall windows 7 64 bit

    After reinstalling windows 7 stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what the problem is. And how to fix it.
    Thank you.

    Perhaps these files were corrupted. I can not say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?
    If so, it is quite rare in my opinion. You are very unlucky. Try reinstalling photoshop. Then check these files were opened or not. If not. Then the only option is a special software. I would use on your site this program
    http://www.photoshop.recoverytoolbox.com/
     (it is not free but is very good and is not expensive. But in the future you will immune from such situations. )
    As well you can learn more about your problem here:
    http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-through-photoshop

  • Can't open my file after saving.using labview 8.2.1

    Hi there, after saving my program, i can't access/ or open my program again, but my subVI can be open, this puzzled me. Can anyone help me with this. i have attach the program,. it also prompt me (this resource you are attempting to open was created in a more recent version of labview and is incompatible with this version). And my Uni is using labview version 8.2.1, no other version.thanks alot
    Regards:MKK
    Attachments:
    cyclodrive combination programme.vi ‏87 KB

    I can't open it either...
    You should always keep back-up....

  • Can't open excel file after saving and closing excel with activex

    I'm using activex to write and save excel files in LabVIEW. My application opens excel (not visible)writes a file, saves it, and then closes both the file and excel. When I try to open the file Excel opens but the file is not displayed, I see the excel header and footer but the file itself does not display. My application is still running at this point. Any suggestions?

    It is critical when using ActiveX with Excel that ALL refnums be properly closed when they are no longer used. Just a single refnum left open will cause the exact situation that you describe. Typically, but not required, the refnums will be closed in the reverse order in which they were created. Here is a good sequence:
    Open Application ref
    Property Workbooks ref
    Open Workbook ref
    Close Workbooks ref
    Select Sheet ref
    Select Range ref
    Write Value2 to Range
    Close Range ref
    Close Sheet ref
    Save Workbook
    Close Workbook ref
    Close Application ref
    When you have properly closed all refnums, the problem will disappear.
    Michael Munroe
    Certified LabVIEW Developer
    www.abcdef.biz
    Michael Munroe, ABCDEF
    Certified LabVIEW Developer, MCP
    Find and fix bad VI Properties with Property Inspector

  • Can I open psd files created in Photoshop CC with lower version? Actually CS5.

    Can I open psd files created in Photoshop CC with lower version? Actually CS5.
    My home and office have different version each.

    Yes, PROVIDED that the file has not been saved with any layers containing any of the specific new features introduced starting with Photoshop CC and higher.
    If the file has been flattened or if it was flat to begin with there will be no problems.

  • Can I open psd file made in photoshop cs3 with photoshop ps2?

    Can I open psd file made in photoshop cs3 with photoshop ps2? Thanks in advance!

    Actually you can open a CS3 file with smart filters in CS2
    the only problem is CS2 will not understand the Smart filter and flatten it.
    If you leave the smart filtered object alone in CS2 save the file and it should still be a smart filtered object in CS3

  • Can't open Numbers file after moving it back to Mac from Dropbox

    Please help!  Can't open Numbers file after moving it back to iMac from Dropbox.   Says I need the newer version of Numbers each time I tried to open the file.  I am 100% sure that I had the newest version.   Spoke to the AppleCare guy and after doing the checks he is also sure that I had the latest version of Numbers and AppleCare can't help.  He suggested that maybe i should run it on a file repair program...any suggestion?... please help...

    I've read reports of people having trouble when storing Numbers 3 documents on Dropbox.  I think it's related to the fact that they're not really "files."  They're "packages" that look like files. I had thought that Dropbox had cleared this up with their latest update. You should be on Dropbox version 2.4 or later.
    If you have Time Machine you may have some luck going back in time and restoring the document from a previous version.
    Storing Numbers documents on iCloud works much better, at least for me, and (unlike Dropbox) iCloud facilitates automatic syncing to other Macs and iOS devices signed into the same Apple ID.
    Perhaps you could consider keeping Numbers documents in iCloud instead. iCloud is deeply integrated into the app, and now works well.
    SG

  • Can't open keynote file after upadating to 1.3.1 !!

    I have error opening keynote file after upgrading 1.3.1
    strange thing when i updated keynote to 1.3.1 was that the stripe above the screen changed to dark gray to white!
    I thought that was new interface but suddenly it has error opening the file.
    So i tried to open through webDAV, itunes, but after downloading the 180mb file of keynote, it shows that it has errors for opening files!
    this backup keynote file worked just great on 1.3 vers.
    http://dl.dropbox.com/u/10521896/NY%20Branch%20Report.key
    is the file,
    would you plz test the keynote file, which was working just great before bringin he

    I tried your file on the iPad and Keynote crashed. Then I transferred the file to my Mac, opened it in Keynote on Mac, saved it, and synched back to iPad. Now I can open the file on the iPad -- it takes some time due to all the images. Also, here are some delays between the slides when presenting on the iPad.
    BTW: Make sure to use the latest version of Keynote on Mac (5.0.5).

  • Photoshop cs4 - Can't open .psd files in Bridge

    I cannot open .psd files in Bridge, only .jpg and .tif, as far as I know.  The .psd files are flattened--no layers.  What's wrong?

    Generated in PS cs4...always starting with a .jpg, working on it, then saving as .psd.
    I open Bridge, navigate to the file I want to work on.  The round icon that is for opening files in Camera Raw is grayed out.  It IS available for .jpg and .tif files.  If I go to the File menu in the upper left, there is no option to open the .psd file in Bridge.  If I just click Open, the file will open in the default program I use for quickly viewing all photos (Irfanview).
    Thinking also about the reply from 2.rob...
    I hope I don't need to designate .psd files to always open in Photoshop in order to get this to work.  I have all photo types set to Open for quick viewing in Irfanview, which I like very much. Often I want to look at a .psd file w/o opening Photoshop, which takes a while to load.

  • In domain environment standard users can't open .psd files

    in domain environment with non admin users; getting this error: http://imageshack.com/a/img543/9085/cdnu.png
    only administrators can open .psd files
    what permissions needs a standard user to open .psd files?

    did fw work previously to open psd files?  - no, only admin users can open psd files wiht fw or ps.
    do you see that error with all psd files? - yes, all psd files give this error, no error given jpeg or png files
    are those cs6 psd files? - yes.
    what happens if you right click fw>click 'run as administrator'? - same error.
    i have to give local administrator rights to users that they can work with psd files.

  • Help - Can't open Adobe files, after expiration of Adobe pro free trial

    I had a 30-day free trial of Acrobat 11 Pro, since the free trial expired a few days ago I can't open Adobe files. When I try to open them a pop-up box appears telling me to buy Acrobat 11 Pro...when I decline, it automatically closes Adobe
    I want to read files with just basic Adobe reader (not Acrobat 11 Pro) and I don't know how to make it my default
    Do I need to purge Acrobat 11 Pro? (I'm using Microsoft OS)
    Thanks!

    Use the Adobe Cleaner to remove Acrobat and Reader COMPLETELY: http://labs.adobe.com/downloads/acrobatcleaner.html
    Download the offline Installer to reinstall Reader: http://get.adobe.com/reader/enterprise/

  • My Safari can´t open .dmg files after downloading

    I updated to Mac OS X 4.9. But since this update, Safari cannot open .dmg files after downloading! On 10.4.8 it was not a problem. What can I do?
    eMac G4 PPC   Mac OS X (10.4.9)  

    Darn...I thought that would do the trick.
    Given the other problems you mention, more and more, it seems a reinstall of the OS, using Archive and Install is going to be necessary. Have you ever done an Archive & Install of the OS? Important you carefully read the description of the process. If you are uncertain, I find the Take Control Upgrading to Tiger E-zine to be a very helpful guide.
    Once you reinstall the OS, then you can upgrade to 10.4.8 using the combo update, repairing permissions via Disk Utility in your Utilities folder when complete.
    One question: Not sure why you have run into all these problems on the 10.4.9 upgrade. It worked without problem for me. Anything unusual happen during the install?
    Message was edited by: Hawaiian_Starman

  • Can't open project files after upgrading to FCE 3.5.1

    I bought a new MacBook Pro and sold my PowerMac, so I bought the 3.5 upgrade to FCE. I was using 3.0 before on my PowerMac.
    I copied my project over, but when I try to open it it just gives me a dialog box with "General error" and an OK button.
    How do I get my project open???

    Make sure you have the latest version of Quicktime
    Quicktime is up to date.
    I solved the problem with the help of Tom Wolsky. What finally worked was taking the project file to my wife's C2D iMac, opening the file there, saving it as a 3.5.1 file, and copying it back to my MacBook Pro.
    The weirdest things to me are:
    1) That there was any problem at all to begin with on my MacBook Pro C2D
    2) That there was no problem on my wifes iMac C2D
    3) When Tom Wolsky opened and saved the file in 3.5.1 format for me it didn't work, but that worked when I did the same thing with my wife's machine.

  • Can't open psd files from Bridge CS6

    Had both CS4 and CS6 installed, CS4 Bridge added itself when I wanted just CS6 Bridge, so uninstalled CS4.  Now cannot open psd files from SC6 Bridge.  What do I do?.

    What is Bridge doing when you try to open the PSD file?  Do you get a warning, does nothing happen?  Did you open the preferences in CS6 bridge and set the file opening preferences to make sure they are set to PS CS6?

Maybe you are looking for