Can't preview footage on my deck

I'm still on FCE 2 (planning to do a major system upgrade later this year), and ran into capture problems, like everyone else, when I upgraded to OS 10.4.9. After reading on this board about the problem and solution (upgrade FCE or revert to an older OS) I remembered I had created a back-up of OS 10.4.7 on an external hard drive. Lucky me. I re-started in that OS and was able to capture successfully.
Now the problem. I can't preview my footage through my deck any longer. Yesterday right after capturing several clips I dropped some on the time line and wanted to preview through my deck on TV. The deck would not recognize anything coming from FCE. This is the same exact setup that I just used to capture -- OS 10.4.7 with QT 7.1.2.
I switched over to OS 10.4.9 with QT 7.1.5 installed and was also not able to see any image on my deck.
Any suggestions?

OK, the problem is back...I guess I was to early in calling this one solved. As I stated the weird thing is that I can capture without any problems now but as soon as I close the capture window and try editing I lose the image on my deck.
Any suggestions?

Similar Messages

  • Can't Preview HDV Capture In Premiere Pro CS6

    I can't preview my HDV footage in Premiere Pro CS6.
    I know I'm not supposed to be able to see anything in the Capture Window when I'm actually capturing HDV, but it says I should be able to see my footage when I am just previewing in the Capture Window.
    Canon HV20
    i7 2600K
    Windows 7 64 Bit
    ASUS P67 MOBO
    16GB RAM
    GTX 470
    Corsair AT 850 Watt PSU
    Thanks!

    Thanks Ann!
    I just figured it out.
    I'm using 2 monitors in extended mode.
    One is a VGA flat panel and the other is a DVI flat panel.
    I had the Capture Window open on my VGA monitor.
    When I moved the Capture Window to my DVI monitor, I got a preview picture.
    It's funny, when I move the Capture Window from the DVI to the VGA while playing, playing stops.
    And when I move it bak to the DVI, it continues to play.
    Maybe because the VGA isn't digital?
    Both monitos are hooked up to my GTX 470 GPU, so it seems wierd.
    Any feedback on this would be welcomed.
    Thanks again!

  • Can we preview data after RKM in SAP in ODI 11g

    can we able to right click and view data in models after reverse engineering in SAP in ODI 11g ??
    Edited by: Drona on Mar 16, 2012 1:06 PM

    No we cannot preview the data as SAP connection is made using Jco adapter.
    We can only preview the data for data servers which are connected using jdbc.

  • Can't preview RAW files in Bridge CC, administrator issue?

    Can't preview RAW files in Bridge CC.
    When i try to upate Bridge, it says:
    Bridge is unable to check for updates, cause it can't connect to the internet or user is logged in as a non-administrative user.
    So then i have to log in as a administrative user to the Bridge...and update..
    Can't it be done easier???
    I must also say i have also Bridge CS6 installed on pc and there everything is working fine.
    Thx.

    1/ Adobe Bridge should be possible to open without administrator issue.
    By default it does, something seems wrong with your install
    2/the images DO appear first for 2 or 3 seconds , then it turns to a RAW file icon.
    Again indicating a wrong install, you see the embedded jpeg previews briefly but then the Raw thumbs should be build. When you see the generic Raw icon this means you don't have the correct version of the ACR plug in installed to match your camera or no converter at all.
    Try this page:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    3/i only succeed in openening Bridge descently , so with ableing to see RAW files , WHEN i go to c:/progamfiles/Adobe/AdobeBridhecc/Bridge.exe
    When, If i copy the exe file for opening Bridge CC and i put it on the Desktop, it DOES NOT Preview the RAW files.
    Here you have lost me. As a Mac user I'm afraid I don't know nor understand anything about .exe, I download the .dmg file for an application which then automatically opens and I just click on the install icon, provide admin password and serial number once and then start using it without bothering about install ever again

  • I just installed ios8.0 on my iPad, and now I can't preview my content in iBooks Author. What does "No ATC" mean? That's the message I get.

    I just installed iOS 8.0 on my iPad, and now I can't preview my content on iBooks Author. I get the message "No ATC". What does that mean?

    I am geting the same message when updating to IOS-5.  "Please re-insert you SIM, or visit your carrier store to receive a replacement SIM card."  Unfortunately we are stuck as well and I have not found anyone yet to give a solution???  Will end up going to Apple tomorrow :-(

  • Help me! I can't preview Some PDF Files

    Some of documents I created can't be previewed in
    acrobat.com? Why?
    The two documents are created by Openoffice.org 3 Beta2
    writier. but only one can preview in acrobat.com...
    This file can be previewed...
    https://share.acrobat.com/adc/document.do?docid=8e8df1a4-1639-4a21-bdcd-e9fbab9f71f1
    This file CAN'T be previewed...
    https://share.acrobat.com/adc/document.do?docid=ba71d1b3-d8be-4041-be8b-7d7c7e578841
    If I create documents by Acrobat 9,would it be no problem in
    preview mode?

    Renu86,
    Please disable any ad blocking or flash blocking plug-ins you
    have enabled in your browser, or try using a fresh installation of
    Mozilla Firefox. The blank black screen you see is most often
    caused by ad blocking software falsely identifying Acrobat.com's
    Flex-based software as a large Flash advertisment and not
    displaying the content. Unfortunately this is beyond the control of
    the Acrobat.com developers and would be local to the client
    machine.
    We are working with several of the most popular ad blocking
    software developers to resolve this situation.

  • Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

    Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
    Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

    Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
    Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
    Make sure SD DVD is selected:
    (If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
    Build your DVD and you'll be fine.
    Patrick
    P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

  • Can't view footage

    We captured some test footage in HD 1080 @ 24p/sf at 8bit YUV. We can hear the audio in CS3, but can't see the video in the Source Monitor. We can view our footage in the Quicktime player, just not in our editor.
    Our video card is the ATI Radeon X800 SE. Not sure if that is the problem.
    Any thoughts on how to figure out what our problem is?

    Beyond my skill set. I suggest dropping by the Creative Cow's XENA forum. Even when I get my AJA Xena LHe installed, I will be using Prospect HD and not the AJA drivers.
    http://forums.creativecow.net/viewforum/217

  • CS5 can't preview the fonts image after upgrade the OS X 10.10.1

    My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
    Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

    Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

  • What file types can be previewed?

    Clearly I am able to preview PDFs in Bridge. However, can I preview RTF files? .webarchive files?
    Thanks.

    Robin, I use Microsoft Expression Media as my all-around file browser. It handles both RTF and webarchive (.war) files, and many more. Link:
    http://www.microsoft.com/expression/products/Overview.aspx?key=media

  • Ibook Author can't preview message

    Hi,
    I have almost finished my book in iBook Author. Today I added short titles to the videos. I've got 50 videos throughout the book. But when I started to Preview the book on iPad IBook Author says it Can't preview. it loaded perfectly fine on iPad till today. This is a screenshot.
    After I added the video titles my file jumped up from 170Mb to 225Mb. I know the file is huge but how 50 short lines can expand it to 55 MB.
    May the file size be the reason that it doesn't upload the book to iPad? I uploaded for the test the previous versions and it works fine, but not the new file.
    Does IBA have a file size limitation to upload it to iPad?
    Any ideas?
    Best regards,
    JaSok

    Issue resolved.
    I think it's a file size issue. I managed to reduce the file back to 170 MB and it loads fine now. But the reason of file expansion to 50 MB was that I applied the character style for video labels to make it ALL CAPS via Widget tool. This simple step added 50MB to the file.

  • Can you PREVIEW the DVD menu you're creating in FCP7 via SHARE

    I can create it, but is there anyway of seeing it in a larger View then
    the little thumbnail size window on the bottom right were you
    add the elements?
    Can you preview it in any way, like iDVD or DVDSP, before you actually do the burn?
    I realize that may be alot to ask of this new mini-built in DVD burner feature, but I just
    wanted to confirm you can or you can't. Also whether you have any control over
    the size of the background picture you add in there, or if you stuck with whatever the
    dimensions of the original media create?
    Thanks.

    GOT IT!
    Copy the BDMV folder from the AVCHD disc to the desktop.
    Use HandBrake to convert the .m2ts files to H.264
    Then convert the H.264 files to an editable format.
    Rather convoluted process but it works.
    Anyone know a better method?

  • Can't preview .nef in Window or Bridge

    I bought a computer with XP pro. Now I can't preview .nef file any more. Both in Window & Bridge. What am I doing wrong ?
    Thanks,
    Ron

    On Sun, 1 Jun 2008 15:25:42 -0700, [email protected] wrote:
    > What am I doing wrong ?
    Could be you need another ACR version [newer cams aren't supported by
    older ones].
    Cannot remember ATM, but do we need Nikon's codec installed to see
    NEFs? I don't think so, just a notion.
    Dierk
    [DH² Publishing]
    www.DH2Publishing.info
    Writing and Imaging

  • Can't preview Excel attachments in iOS8

    We have several users who can't preview Excel attachments in e-mail on their iPhones . I've seen this happen with users with iPhone 4Ss to iPhone 6+'s. They all have iOS8, including the most recent update.
    The device tries to open the attachment: you see the spinning wheel for a few seconds, then just shows the name and file type.
    I've tried saving the file as an older xls file, or a newer xlsx file (new up to Excel 2010: haven't been able to test with 2013). I've tried removing worksheets, reformatting the file. It does not work.
    The files will open in Numbers or Documents to Go on the device. It is only in the mail preview it does not open.
    It happens in e-mail from an Exchange server, GMail or AOL.
    I do see that it creates an error log. Under the Diagnostics and Usage log, there is a log file called quicklookd_DATE_TIME added and the file LatestCrash_quicklookd.ips is updated each time I open these. I'm not sure how to find the error in here, but the Exception Type is EXC_CRASH (SIGABRT).
    I've seen some posts about downloading full messages to solve this, but as far as I can tell they are downloaded.

    Yes, it can't be opened as an attachment.

  • Can't preview anything

    trouble. I can't preview anything, photos, powerpoint slide designs. nothing. the finder shows the files (just icons) but i can't see any images. if i want to, i have to double click and open preview to see the photo. or in powerpoint i have to select the slide design to be able to see it and then close it and select the next one otherwise all i see is an icon (this is just to choose the slide design i want for my presentation) . help!

    Actually, when i can't preview the slide is right at the start when i get to choose the slide design so there is no way to know what the slide looks like unless i select it and i apply it to the presentation i'm gonna start...

Maybe you are looking for