Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine

Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine...
I tried to install driver on connecting PC, i tried to install printer as Local printer with local port - \\WIN7-32bit\HP PSC 1310 Series\ - and i got access denied, and before i reinstall Windows on 64Bit machine its worked correctly... anyone know how to solve this problem ?
*Edited*
When i connect it on 64 Bit machine printer requesting driver *.inf and not specific file...
i try to install 64bit driver on 32 bit machine in sharing options and they didn't support it...

More than likely, you are receiving the access denied error because there may not be a HomeGroup in place.
To handle networks securely with Windows 7, Microsoft took a different approach. A HomeGroup essentially creates a trust among all the devices in that home group. If a device is not in that homegroup, then that system will essentially be denied access.
Click on Install a printer on a home network to get basic steps to install a printer in a network environment.
Click on HomeGroup: recommended links to get more information about Home Groups, including setting one up.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Can't Print/Connect from Windows 7 to Shared PSC 1315 on XP Machine

I have an HP PSC 1315 connected to a Windows XP (32 bit) machine. This printer is shared. I can access it from other XP machines on my home network. I cannot access it from my Windows 7 (64 bit) machine. I can see the printer is shared on the machine, but when I double click on it, I get the following error:
"Windows can't find a driver for hp spc 1310 series on the network. To locate one manually, click OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website."
So I tried downloading the Windows 7 (64 bit) driver from HP and installed it on my Windows 7 machine:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-75052-1&lc=en&dlc=en&cc=ca&...
At the end of the install, it asks to connect the printer to the computer through USB. Since I'm not physically connecting the printer to the Windows 7 machine, I check the box that says I can't connect to it right now and proceed to finish.
I then tried to connect to the printer and I get the same error. I try locating a driver manually. I point to c:\windows\inf\ with no success (I'm *assuming* the driver info would get installed there, though I don't know what the .inf name is). Windows says it can't find a suitable driver. Possibly I should be looking for it elsewhere?
I found some troubleshooting utility on HP's website, but it doesn't give "shared printer over a network" as one of the connection schemes to troubleshoot.
I'm kinda stumped on this one. Hoping it's going to be something simple I missed.
Thanks!
This question was solved.
View Solution.

Hi,
Kahless wrote:
I have an HP PSC 1315 connected to a Windows XP (32 bit) machine. This printer is shared. I can access it from other XP machines on my home network. I cannot access it from my Windows 7 (64 bit) machine. I can see the printer is shared on the machine, but when I double click on it, I get the following error:
"Windows can't find a driver for hp spc 1310 series on the network. To locate one manually, click OK. Otherwise, click Cancel and consult your network administrator or the printer manufacturer's website."
So I tried downloading the Windows 7 (64 bit) driver from HP and installed it on my Windows 7 machine:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-75052-1&lc=en&dlc=en&cc=ca&...
At the end of the install, it asks to connect the printer to the computer through USB. Since I'm not physically connecting the printer to the Windows 7 machine, I check the box that says I can't connect to it right now and proceed to finish.
I then tried to connect to the printer and I get the same error. I try locating a driver manually. I point to c:\windows\inf\ with no success (I'm *assuming* the driver info would get installed there, though I don't know what the .inf name is). Windows says it can't find a suitable driver. Possibly I should be looking for it elsewhere?
I found some troubleshooting utility on HP's website, but it doesn't give "shared printer over a network" as one of the connection schemes to troubleshoot.
I'm kinda stumped on this one. Hoping it's going to be something simple I missed.
Thanks!
Here is a nice explanation of how to share a printer from an XP PC to a Windows 7 PC on a home network. This should work since the Windows 7 (64-bit) PC can see the Windows XP 32-bit partition. What you missed was the type of port to use for the networking connection.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Deskjet 2800 can't print 11x17 from tray 2 with windows 7

After my PC had windows 7 installed I can't print 11x17 from tray 2. The hp website driver download page doesn't list a windows 7 driver, it instructs me to use the in os driver but that driver will only print to 8.5x11. Is there a fix for this?
Thanks, Jimmy

"iTunes could not connect to the iPod update server because you are not connected to the internet.
Make sure your internet connection is active and try again."
perhaps try the technique from the following post:
Kirk1701: Re: ipod wont update - "you are not connected to the internet"

Can't print photos from any phot editing program or photo program

my printer is hp photosmart C6380 all in one printer, operating system is windows 7 64-bit.
I can't print photos from microsoft office picture manager, or windows live photo gallery, etc. Have to use microsoft word to import the pictures into and then print.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How can I print directly from my iPad to my new Primax 3260 printer when I have no computer. Do I need a portable single unit Router?

How can I print directly from my iPad to my new Primax 3260 printer when I have no computer? Do I need a portable one to one Router for the wiFi connection. My Internet is through Telstra 3G system.

Is your printer a wifi printer or hard wired only? If it's a wifi printer then you might want to look into third party apps like Print n Share or Print Central which allow a version of air printing to non-air print printers.
You may also want to look on the manufacturer's site. Maybe they have a fix for you.
If your printer isn't wifi, then you will need a router to get it on a wifi network to print to it. As far as I know, there is no support for the iPad to do wired printing.

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer? I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer?
I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

Can't print wirelessly from iMac to HP 8600 all-in-one

A few weeks ago, I purchased a HP 8600 basic printer and setup it up to my two iMacs and to the router (cisco brand).
I haven't really printed with it since I have gotten it, which did print when I tested it at first. Now I can't print wireless from either iMac (one iMac is ver. 10.9 and the other is ver. 10.8). Both my computers and printer are connected to my router, but when I go to print something the printer dialog box tells me: "the printer is not connected."
What am I doing wrong?
Thanks

Hello Viggo_R, Welcome to the Forums
I understand you are unable to print from your 10.8+10.9 systems and would like to help out the best I can.
I have researched the issue at hand for you and have found a guide that I suggest following. Hopefully this will connect your printer back on the network and get you up and running again.
Click here to get started: Printer Does Not Maintain Wireless Connection
This guide might also be helpful: Print Jobs are Stuck in the Print Queue
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Changed printers, now can't print wireless from laptop

Hi. I changed to a HP printer from an Epson. Now I can't print wirelessly from my laptop through my Airport Express. I get a message that the printer is offline.
Went to the HP site & got latest drivers. And there was an Apple update for the HP. I can print when the laptop is connected to the printer by the USB cable.
When I first set up the AP Express 2 years ago, I was able to print wirelessly without any problems.
any ideas?
Thanks

Got it fixed. Went to the HP site again & they had info for OS10.5 that worked.

Can't print anymore from my HP Photosmart B110a

since a while i can't print anymore from my HP Photosmart B110a, everytime when i want to print something the task screen pops up and it gives an error: ERROR: /Library/Printers/hp/cups/Inkjet8.driver/Contents/MacOS/Inkjet8 failed
and when i want to open HP utility it gives this error:
Process:         HP Utility [288]
Path:            /Library/Printers/hp/Utilities/HP Utility.app/Contents/MacOS/HP Utility
Identifier:      com.hp.printerutility
Version:         ??? (???)
Build Info:      HP_Monolithic_PrinterSupport-540100~6
Code Type:       X86-64 (Native)
Parent Process: launchd [109]
Date/Time:       2011-07-13 10:54:22.795 +0200
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          74141 sec
Crashes Since Last Report:           36
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      7D8B5C46-F503-4B77-B36A-324879D476EF
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Printers/hp/Frameworks/HPDeviceModel.framework/Versions/3.0/HPDeviceMo del
Referenced from: /Library/Printers/hp/Utilities/HP Utility.app/Contents/MacOS/../Frameworks/HSDCommonLib.framework/Versions/A/HSDC ommonLib
Reason: no suitable image found. Did find:
          /Library/Printers/hp/Frameworks/HPDeviceModel.framework/Versions/3.0/HPDev iceModel: mach-o, but wrong architecture
there is a lot of more text but i think this is the most useful.
now i already reinstalled the software but i get always the same problem.
i was thinking that it would perhaps has something to do with the updates of mac os x?
i hope somebody can help me ! thanks a lot in advance!

How do you connect it ? With Wifi or USB ?

I can't print anything from Firefox. I get blank pages

Ever since I downloaded the previous update, I can't print anything from Firefox. I just downloaded version 3.6.8 and I have the same problem. I am using a Mac with OS 10.6. Whenever I try to print an email or a web page from Firefox I get a single blank page.
I can print fine from Safari. Firefox worked fine until I installed version3.6.5 (or whatever the previous version was)

Thanks I will check out the site!

How can I print stuff from the 'Help' file using my MacBook Air?

How can I print stuff from the 'Help' file using my MacBook Air?

Open the Help viewer, select a category then from the menu bar top of your screen, click File > Print

How can i print collage from instagram?

How can I print collages from instagram pics?

Take a look at the application Printopia. It's an application for your Mac, if in fact you have a Mac. Works great here. Cost is about $10 (US.)
I'm not sure how it will work with a network printer. Probably depends on your setup.
dick glendon

How can I print texts from iPhone4 to Canon MX870

How can I print texts from iPhone4 to Canon MX870

The following gives instructions. http://support.apple.com/kb/HT4517
Note that your carrier may not support it or may have added charges.
To use this feature, enable Personal Hotspot on your cellular data plan. Contact your carrier for information and pricing.

HT1515 i want to know that how can i print direct from my pc, and i also want to knw that can i directly print from my ios device.

i want to know that how can i print direct from my pc, and i also want to knw that can i directly print from my ios device.

To print from your PC, please check out the following iFelix article.
To print from an iOS device (iPhone, iPod Touch, or iPad), the printer must be AirPrint-ready. If the printer is not, another option would be to use something like.
Also you can check out this Apple Support article.

HT5569 How can I print wireless from my iPad 4

Hi everyone!...
How can I print wireless from my iPad 4?
Your answer will be most appreciated.
Thank u s. M.

See requirements for AirPrint and printers that support AirPrint here:
http://support.apple.com/kb/ht4356
If your printer supports AirPrint but does not work then:
Your printer might need a firmware update
Your printer must be on the same WiFi network
Your router must support Bonjour (Zero-configuration networking).
For troubleshooting:
Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
Turn on WiFi router
Wait 30 seconds
Turn on printer
Wait 30 seconds
Turn on iPad
Try to print.
If you need more help then what printer do you have?

Can't Print/Connect from Windows 7 64 bit to Shared PSC 1315 on Windows 7 32bit Machine

Similar Messages

Maybe you are looking for