Can't print from my Power PC os x 10.4.11 to Sharp MX3501N

I am not able to print to the Sharp MX3501N from my Power PC G5 with the os x 10.4.11 operating system. It spools to the printer, but won't print. Anyone have a similar problem and if so figure out what the problem was?

Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Mac OS X: Cannot print, use Classic, start file sharing, burn discs, or update software if /tmp missing...
http://support.apple.com/kb/TA21161?viewlocale=en_US

Similar Messages

HT4356 I have an air-print enabled printer: HP Premium e-all-in-one C310. Can't print from iPad iOS6. They're on the same network, but have different IP addresses. On the iPad it's 192.16.1.126 and on my printer it's 192.168.1.133. Can I match them? H

I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310). They're on the same network, but have differed IP addresses! The iPad IP is 192-168-1.126 and the printer is 192-168.1.133. That's the only difference I can see. Is there a way to fix this?

fyi:
you put periods between the numbers.
Each device needs a unique number.
for the 192.168.1 the right must number should vary. 192.168.1.x
the numbers you have look ok.
Power off all devices: wifi router, printer, ipad.. wait 10 minutes. poweron router ... wait power on printer wait then power on ipad.
cross fingers.
Robert

Can't print from Mac to Windows printer

I have a wireless network of 3 computers and a printer. One is a desktop running XP with the printer attached. The other is a laptop with XP. And the last is a MacBook with 10.4.11.
I can print from both computers running XP but I can't print from the Mac. The Mac sees the printer and I can add it and try to print from it. When I try to print I get the error message:
NTSTATUS_NOMEMORY
I later get the "Unable to connect to SAMBA host, will retry in 60 seconds" message too.

Be sure the printer name assigned in Windows is not more than 11 alphanumeric characters. Long names with punctuation and the like are known to cause problems.
Look at:
Mac OS X 10.4- Can't print to a printer shared by Microsoft Windows;
Mac OS X- Cannot locate a shared Windows printer;
Mac OS X- How to manually add a Windows shared printer;
Setting up to print to a printer shared by a Windows computer via SMB;
And finally this:
Monday, July 24 2006 @ 11:00 AM PDT
Tutorial: Resolving common printer problems
Mac OS X offers a robust printing system with built-in support for hundreds of devices from a wide body of manufacturers. It's not without flaws, however, and printers often become unrecognized or non-functional after a significant Mac OS X update. Printers connected through hubs or AirPort base stations can also exhibit some frustrating issues.
Below is a run-down of the most generally successful printer workarounds. Keep trying until one of them sticks.
Use Printer Setup Repair This tool lets you verify properties of the root user, the Printing Services (lp) user, and Print Operators (lp) groups, reset the printing system, perform CUPS maintenance and more. Run through its set of maintenance tasks before delving into further printer troubleshooting. See how to use it in this article.
Re-install CUPS If you are experiencing printer issues after applying an incremental Mac OS X update, problems may have occurred with your CUPS installation during the update process.
The file is available from this Web site: http://www.cups.org/software.php, and is labeled cups-1.2.1.dmg
Delete then re-add printers/Reset printing system Open Printer Setup Utility, located in Applications/Utilities and look at the "Printer List" Highlight and delete all entries.
Alternatively, go to the "Printer Setup Utility" menu at the top of the screen and select "Reset Printing System".
Click the "Add" button and re-add your printer(s).
Gutenprint and usbtb Some users have been able to resolve printer communication issues by installing the excellent open-source Epson printer drivers available as part of the Gutenprint package (formerly known as Gimp-print) and usbtb, a CUPS back-end for USB printing.
Remove non-required drivers Removing extraneous drivers from /Library/Printers(name of manufacturer) can sometimes resolve printer issues. Remove files that are for other models than your own.
Re-install drivers Re-installation of printer drivers from original media or from a Web download (either directly through the manufacturers site or via a search by model/manufacturer on VersionTracker) can resolve some printer issues.
Try disconnecting from network In some cases, LAN-connected printer, seemingly broken by the Mac OS X update can restored to normal operation by simply disconnecting the device from the network then re-connecting it.
"Communicator Error" -- try power cycling If you receive a "Communication Error" message when attempting to print after updating to Mac OS X 10.4.5, the first workaround you should try is power cycling the printer, as well as disconnecting then re-connecting it to the Mac.
Connecting directly to the Mac If you are having printer problems and are using an external USB hub, try connecting the printer directly to your Mac.
One reader who had success with this method writes:
"Unfortunately the update to Mac OS X 10.4.6 has eliminated the ability to use my Lexmark Z600 series USB printer on my iMac G5 20" iSight (rev C).
"I resolved the problem via the following: I unplugged my external USB hub and plugged the printer directly to my computer."
Disconnect from AirPort and reset For those who are using printers connected to an AirPort Express, Extreme or another wireless device with USB connections, you might want to try the following:
Disconnect the printer from the AirPort unit (or other router)
Wait a few minutes
Plug it back in
Restart the base station unit
Check for your printer to appear in AirPort Admin Utility (located in Applications/Utilities)
Print one copy In some cases, using print one copy instead of the standard print command can result in elimination of crashes that occur during printing.
Try IP printing instead of AppleTalk Some Macs are unable to see AppleTalk printers that are located on the local AirPort (or other wireless) network. Several users have been able to workaround this issue by using IP printing instead of AppleTalk.
Last resort -- Archive and Install As a last resort, try performing the somewhat tedious Archive and Install process, then re-upgrading to Mac OS X 10.4.7. This has solved some otherwise inexplicable printer issues for MacFixIt readers.

My 4500 series printer is back in MI. I am currently in AZ with my 1410 series. I can't print from

I have a laptop that goes back & forth from MI. to AZ. Mi has the 4500 series, and AZ has the 1410 series. Now my laptop shows the 4500 as offline & I can't print from my printshop, or Kodak files. How do I put the 4500 back online???

Did you want to print to your remote printer or are you trying to print to the 1410?
If you have Windows 7 you could set your system up to have a different default printer in AZ than in MI. To do this go to the Devices and Printers folder, right click on the local printer and in the menu bar near the top a new menu item will appear that allows managing default printers. You would then be able to have the default printer change automatically when you change locality.
You can also manually change your default printer. If you have Windows go to the printers folder, right click on the desired printer and select Set as Default.
If you are trying to print to the remote printer and it has gone offline (perhaps due to a temporary power outage) you may have to physically reset the printer or have someone local do it for you.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why can I print from my iPhone and not my iPad? I have been able to do it in the past and have tried a hard reset but it can no longer find the printer.

Why can I print from my iPhone and not my iPad? I have been able to do it in the past. I have tried a hard reset but it still cannot find the printer.

In addition to rebooting the router and the iPad, I would reset the printer as well. Unplug the printer from power and do the same with the router. Leave the router unplugged for about 30 seconds. Plug the router in first and let it totally start up, plug the printer in again, and then reboot/reset the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. Your WiFi passwords, location services, device preferences all have to be re-entered. You will not lose any data or media whatsoever.

HT4356 can i print from my ipad4 using a kodak wireless printer

can i print from my ipad4 using a kodak wireless printer

If its listed as an airprint enabled printer, you can print right from the ipad with the built in feature. If not, there are other options.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Print from iOS device to virtually any printer
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

MFP M127fn connected, test printing OK, can't print from applications

Hello Everyone!
I have just set up my M127fn via USB on a Windows 8 system. The set up went fine. I have a small stack of test pages from the HP software, but it won't print anything from any applications like MSOffice. The HP diagnostic software (Print and Scan Doctor 4.6) can communicate with the printer and everything checks out OK.
Any suggestions?
Thanks in advance.

Hello!
I have replied twice to your last posting, but have heard no response. Unless a solution can be presented quickly, I fell I must return the product. LPug and play was introduced with Windows 95 and this HP product has not lived up to that 20 year old technological standard. My previous replies are copied below.
Please respond soon.__________________________________________
Re: MFP M127fn connected, test printing OK, can't print from applications
Options
‎01-31-2015 08:06 AM
Hello again!
I haven't heard a response to my most recent reply. Is there anything you can suggest before I give up and return this HP product to the store? I would like a quick resolution to this. As an update to my previous email (copied below), printing is no longer working through Adobe Reader.
Thanks,
Chris
Re: MFP M127fn connected, test printing OK, can't print from applications
Options
‎01-28-2015 01:08 PM
Hi,
Thanks for getting back to me. I have tried a variety of different programs:
Mozilla Thinderbird (email) - no results
MS Word - no
ms excel - no
Finale (music software) - no
Adobe Reader - yes!
Google Chrome - yes!
NotePad - yes!
perplexing!

Can not print from preview after Lion Update

I can't print from preview since I updated to Lion. After I hit command P or select print from the file tab preview totally freezes up and gives me the spinning wheel of death until I force quit preview. I have no issues printing from anything else, such as word, excel, web pages. So I don't think it's a printer/driver error. Help?

I would still mention what printer you have and make sure you have the latest printer driver.

All of a sudden I can't print from Firefox. I reinstalled the printer and also reinstalled Firefox. No joy. I can print from Safari.

I have an IMac, OS X 10.5.8
I've had it for more than a year and have always been able to print from Firefox without a problem. I have an HP deskjet 6850 printer.
Now I can't print from Firefox. When I hit print, I get the dialog box but if I click print -- or even click "preview" nothing happens. The dialog box disappears and nothing prints.

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Should I be able to use a Lexmark Pro 205 wireless printer from my iPad 1? My iPad can't find the printer. Iveinstalled the Lexprint app on iPad and downloaded the Lexmark Listener on desktop computer. Still can't print from iPad.

Should I be able to use a Lexmark Pro 205 wireless 3 in 1 printer with iPad 1? I have installed the LexPrint app on iPad, downloaded the Lexmark Listener on desktop computer but still can't print from iPad. My iPad cannot find the printer. But I can print from desktop without USB cable. I upgraded the system on my iPad sometime ago. Suggestions??

Here is the list of AirPrint printers, and you particular printer is not on it. So that means you will need to use the Lexmark app, and print through your computer.
There is a Lexmark guy that hangs around these forums who may chime in with a response as well.
http://support.apple.com/kb/ht4356

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

After upgrading to iOS 8.0.2, I can't print from my iPhone 5s

After upgrading to iOS 8.0.2, I can't print from my iPhone 5s. My iPhone 4s and iPad continue to print. When I try to print to either printer, the message reads,"contacting printer," and then, "preparing to print." But nothing prints.

Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.

Can you print from an iPad 2 using 3G in a home with no computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area

Can you print from an iPad 2 using 3G in a home with no other computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area and is wanting a printer to use occasionally. He doesn't want to deal with a computer and I keep his iPad updated for him at my home. Please shed some light on this for us PLEASE. Thanks

In that case, it should be possible. I haven't tried this directly, but I believe it should work.
You'll need to get an actual AirPrint compatible Printer.
Check here for a list of Printers you can choose from.
http://support.apple.com/kb/ht4356
Once you have the compatible printer, using the Hotspot feature from the iPhone he'll have to create the Wifi bubble form the iPhone, and connect the Printer to that Wifi network.
Then connect the iPad to that same Wifi network provided by the iPhone. When all that is done, the printer should appear in any of the Apps that can Print under the Action Arrow button.
For instance in email, pressing the action arrow should show a Print option. In there the printer should appear.
Alternatively you can simply buy a wireless router and setup the network through there even if there is no internet attached. Connect the wireless printer to the router network, and connect the iPad or iPhone to that same wifi network to print.

How can I print from my iPad through my Mac Book Pro which is connected to a printer? I was told I could do this.

How can I print from my iPad through my Mac Book Pro which is connected to a printer? I was told I could do this when the iPad and Mac Book Pro are synched together.

Antique lady wrote:
So If I download Printopia on my Mac Book Pro, do I go to iTunes to somehow connect the computer and the iPad?
No.
Printopia (running on your Mac) connects the iPad to your printer.

How can I print from my ipad2 to my hp6210 all in one using printopia...I can see the list on my ipad2, I select the printer and say print but nothing happens.

How can I print from my ipad2 to my hp 6210 all in one using printopia? I see my printer on my iPad, I select it and say print and nothing happens. The printer is connected to an older Mac with OS X 10.4.11 but I do have an imac in another room. I have trouble printing from the iMac to this printer also even tho share is on but the printer works fine with the old Mac it's connected to. My iPad has the latest iOS.

A few things to consider.
The computer Printopia is loaded on must be powered on and must be able to print on the printer that is being shared. If the iMac is having problems printing to the printer it could indicate a problem with the share setup.

Can't print from my Power PC os x 10.4.11 to Sharp MX3501N

Similar Messages

Maybe you are looking for