Can't print from Word or Adobe...but everything else works just fine

I get error message "opening raster file failed!"
I have tried different printers and none work. Any suggestions?

Could there be a newer or upgraded printer driver available for your
print hardware, from the printer manufacturer's support site, or maybe
via Apple Support downloads?
The error message relates to other users with printer issues among
other brands of printers; so it may be your print drivers are at fault.
If the driver installer disc from the manufacturer has its own un-install
process, use that to remove the existing driver before reinstalling an-
other one. There also may be a print driver option from Gimp online.
Good luck & happy computing!

Similar Messages

Downloaded Mt Lion. Now my facetime launches then quits with message that there is a problem with the C_L Kernel Plugin. Everything else works just fine. I can get on line etc.

I have have an early 2008 imac 8,1 It has been a good machine no problems. UNTIL we downloaded Mt Lion. We can no longer use facetime. We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin. We can go on line without difficulty, everything else seems to be working. Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution. We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime. Is there some patch we have missed? Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection. We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast. So any help at all would be appreciated. We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair. We know the machine is old by most standards today. But we pretty much run our machines until they can't power up. So we'd like to get this one back on its perch so to speak with its face time working.
Thank you ahead of time for any advise help given.

A log may help determine what the issue is ...
Open the Console app located in HD > Applications > Utilites
Select: System Diagnostic Reports on the left.
Copy and paste the most recent kernel panic or crash log in your Reply.

Why can't I make or receive calls but everything else is working fine.

Why can't I make or receive calls but everything else is working fine?

For that you have to talk to your carrier, what did they say?

I restored my computer, now when I try to update my iphone it keeps saying networked timed out but my internet works just fine. What can I do?

I can't update my iphone 4 it keeps saying network timed out check my settings but my internet works just fine.This happened after I restored my computer

This question is asked at least 5 times a day.
Turn off all antivirus, antispamware, and all firewall software.

I use imovie 08 and know I'm way behind but it always worked just fine for me. For some reason I lost all my music

I use imovie 08 and know I'm way behind but it always worked just fine for me. For some reason I lost all my music & sound effects. Can anyone help me regain it back?
I use this for video editing in Final Cut Pro

I use imovie 08 and know I'm way behind but it always worked just fine for me.
I use iMovie 06, I have a new Mac Pro and iLife 11.
Sorry, I don't know why you lost your music and sound.

HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

Please don't shout.
Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Printing from Word to Adobe

I will try to print from word to the Adobe printer. Sometimes it just freezes. I cannot select another printer. It’s like all my printers are gone. Sometimes I get an “Unable to Connect” error and sometimes I get “1 document in printer queue”. No matter what printer I choose after I try to go to Adobe, I cannot connect to a printer. The only solution I have come up with is a clean reboot.

Do not use the PDF Maker, but print to the Adobe PDF printer and see if that meets you need. If you need some of the tools of PDF Maker, then turn on only those you need, not them all. Check to be sure that the graphics are indeed being downsampled and possibly go back and reduce the graphics you have in the WORD file so that you are at least not using millions of colors, 256 max. Also consider using straight B&W if color is not needed, or at least gray-scale.

Can't get new interactions to work (but previous ones work just fine...)

I'm making an interactive wire frame/prototype in which I have build some "text entry fields" by using the simple contact form and making everything in it but some single line form fields invisble.
The first one worked just fine. In preview, I could see the different stages and type in the fields.
But then I copy-pasted the entire contact form - and those form fields are only seen in the normal state, when I preview. All though I got several states - nothing happens when I try to mouse over them, click them or type in them... In fact I have noticed, that after a specific time, when I was working yesterday, all new interactions that I try to embed, doesn't work (incl. photoshop button and object states), but those build before that time, work as usual...
I have tried making interactions in a new site - and there everything works fine.
Have I maybe accidentally changed some site properties? ...is it a bug? ...or?

Does anyone know this problem?
I have had it for three days now, and it keeps expanding to other pages as well... At the moment I'm almost giving up on muse. There is not really any point in spending time on Muse, if I can't make my site interactive anyway...
I would appreciate any quick help

Iphone 3gs- phone quit working, but everything else works, put sim card in another phone and works fine, need help

iphone 3gs can not talk on or recieve calls, but every thing works, apps., music, internet, ect.. put sim card in another phone and able to call and recieve calls, what happened.

Reset phone - press both home and sleep/wake buttons until the Apple logo appears in 10-15 seconds.
Settings > General > Reset > Reset Network Settings

Can't Print from Freehand via Adobe Driver

For no obvious reason I can no longer print from Freehand to pdf using the Adobe driver.
I'm using Freehand 11.0.1 on Windows 7 (64-bit). Our team has the same problem on Windows XP with Freehand 11.0.1, and Windows 7 (32-bit) with Freehand 11.0.2. All of the above stopped working this week. We still can print to pdf using Cute PDF. But we really would like to get back to using Adobe which gives us more control over the output generated.
Here is the content of Adobe log file:
---------- start of log file ----------------
%%[ ProductName: Distiller ]%%
%%[ Error: syntaxerror; OffendingCommand: --nostringval-- ]%%
Stack:
{AVec 256 array copy /f1 /|______Gen_Arial dup RF findfont def f1
DoPatch}
false
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
----------- end of log file ----------------
The problem does not occur using the same Adobe print driver with MS Word, PowerPoint, or Adobe Illustrator CS6.
Has anyone else seen this or have a clue how to resolve it?
Any help is very much appreciated!!!!!
Thanks!
John

Did you update your Acrobat/Distiller application before it stopped working? My first thought was that something was changed last week to have this happen and to go back and recreate what that might have been. Sounds like an Adobe update.

Can't print from PS or PSE but can from Aperture and Pages

I suddenly am unable to print photos from my iMac running 10.6.6 with Photoshop CS5 or PSE 9 to my Epson SP 2400 (FireWire on the iMac) or 3880 (either connected to my MacPro and addressed through WiFi, or connected to the iMac thru USB). Everything seems to go normally until I press Print, then nothing happens. When I select Preview or PDF instead of Print, I get a blank page. I THINK the problem may have begun only after I updated from 10.6.5, but I'm not certain, and it could have begun only after I upgraded to PSE 9 but again I'm not certain. Prior to making any changes, printing worked normally with PS CS5 and PSE 8 under 10.6.5. Drivers are up-to-date.
Printing a text-only document from Pages on the iMac to a WiFi-connected laser printer works fine.
Printing a text-only document from PSE 9 or on the iMac to a WiFi-connected laser printer, curiously, also works fine.
Printing a photo from PSE 8 on my MacBook Pro updated to 10.6.6, thru WiFi, to the 3880 on the MacPro, works fine.
Printing from Aperture on the iMac to the 2400 thru USB works fine.
Printing from Aperture on the MacPro to the 3880 thru USB works fine.
Printing from Aperture on the iMac thru WiFi to the 3880 on the MacPro works fine.
As I write this, I'm recognizing for the first time that the problem seems to be in printing a photo either with PSE 9, or with PSE 9 installed on the same computer from which I'm trying to print with CS5. Rather than not post this until I've done some experimentation (like installing PSE 9 on the MacBook), I'll go ahead and post first and hope to hear from the Voice of Experience.
Anyone?
Message was edited by: hlritter
Message was edited by: hlritter

Re the driver affecting pdf printing, the answer is no. The print to pdf uses internal processes and is not impacted by the vendors driver. So given that Rosetta was no help and Word is also failing, then it suggest that the core printing system is at fault. Although the ability to CS2 to print is a 'curve-ball'. The CS2 suite does things differently when it comes to printing but it still eventually uses the core printing system to get the file to the printer.
So, some things to try....
1. Install the 10.4.9 Combo update. If you did the sequential update from 10.4.8 to 10.4.9, then this update can fill missing holes.
2. Get Fixamac's Printer Setup Repair utility to see if it can identify any issues.
3. Get Gutenprint 5.0.0 and try adding a printer using one of these drivers.

Can't print from Mail or Firefox but can from CS2

When I try to print from Mail I get the 'Print - Error While Printing' error coming up. It doesn't matter which printer I print to and it even does the same thing if I try to make a PDF. If I print from Firefox I don't get an error but nothing happens. However, I can print fine from Creative Suite 2 so I wonder if it's only affecting native Intel apps maybe?
Anyway, I have tried rebuilding disk permissions and replacing libConverter.dylib with another copy, none of which makes any difference. Any ideas anyone?
2x2.66GHz Dual-Core Intel Xeon Mac OS X (10.4.9)

Re the driver affecting pdf printing, the answer is no. The print to pdf uses internal processes and is not impacted by the vendors driver. So given that Rosetta was no help and Word is also failing, then it suggest that the core printing system is at fault. Although the ability to CS2 to print is a 'curve-ball'. The CS2 suite does things differently when it comes to printing but it still eventually uses the core printing system to get the file to the printer.
So, some things to try....
1. Install the 10.4.9 Combo update. If you did the sequential update from 10.4.8 to 10.4.9, then this update can fill missing holes.
2. Get Fixamac's Printer Setup Repair utility to see if it can identify any issues.
3. Get Gutenprint 5.0.0 and try adding a printer using one of these drivers.

Can't print from Word or Acrobat

OK, I had this problem maybe two years ago and I did fix it. The problem is back and I don't remember how I fixed it.
I have an HP printer (new printer since the last time I had this problem so its not necessarily the printer) - MS Word and Acrobat Adobe will not allow me to print.
I can print Appleworks and can convert Word to pdf and print it with Preview not Acrobat.
Did I reinstall the printer program? or Word or Acrobat?
Diane

There is absolutely no relationship between what InDesign installs (and uses) and the operation of Microsoft Word and Acrobat. InDesign does not install any system components or share any system components with Word and Acrobat.
Look elsewhere for causes and solutions. In the case of Acrobat, if you have specific issues with printing with specific types of PDF files and/or devices, post your questions on the appropriate Acrobat forum (“Printing and Prepress”).
- Dov

HT4199 Why am I being asked to reset my router because I can't connect to a game app but everything else is working fine?

I've been told to reset my router as a possible solution to not being able to connect to a game app. Why is this when my connection is fine for everything else, including other game apps ?
Thanks

From my own experience Routers can be a little 'fussy' from time to time. For example my other half may well be happily surfing the 'net on her iPad but mine won't connect, however after a quick 'reset' of the router - unplug it for about 30seconds, then plug back in - all is happy and working again. So this may be the reason why.
Regards,
Steve

Suddenly can't play video on ipod but everything else works. Any ideas??

Strange. I reset my ipod classic 80 GB several times but still nada. The window display is fine for all my music but when I press to play a movie or video the screen goes black and doesn't shut down. When I connect the ipod to my XP computer, and play the videos from my ipod onto quicktime, they play. But disconnect and try to watch from the ipod screen and nothing. They worked before just fine.
Any ideas what's up?

Thanks for the reply. The videos are MPEG 4 and where converted for ipod. I've used them on my ipod for a half year and all has been fine. The other day I loaded some podcasts into my ipod including some video podcasts and then when I went to watch the screen goes black but is still on. The only thing I can do is reset my ipod to turn it on. If I only listen to music or audio podcasts then everything is fine. Pictures are fine too.
I got fed up and finally did a Restore. It still does the exact same thing. Music is all good but the videos don't work. Not even video podcasts. The ipod freezes and requires a reset to boot it up again. Really strange.
Any ideas??

Can't print from Word or Adobe...but everything else works just fine

Similar Messages

Maybe you are looking for