Can't print more than once with my epson epl-5800L and airport express

I recently bought an airport express (b/g) in order to use it with my epson usb printer epson epl-5800L. I'm running mac os X leopard 10.5.7 on my macbook pro (2.4 ghz). The printer is plugged into the airport express (firmware 6.3).
My problem is the following : i can only print one job (one document), after that if i want to print a second document, the printer don't accept the print job...and the print status windows shows the following message "Unable to open device (read failure)!". The only solution to get it printing again is to reset the Airport.
I downloaded and reinstalled the last 10.5 driver from epson site, this didn't result in any success, the problem remain, it's even worse now the application office word quit unexpectedly if i try to print through airport express. The error message say "The application escpageASTool quit unexpectedly".
The problem seems only related to airport express via Bonjour protocol, because if i connect the printer directly to the usb port of my macbook pro i can print without troubles. Also, as reported from many forums Tiger 10.4 seems not concerned by this problem.
Any help would be much appreciated!
Thanks,

I found this statement - +"Note: AirPort Base Station and Time Capsule printer sharing is for printing only, not for printer utilities or other special features that may require a direct proprietary connection."+ within http://support.apple.com/kb/TS1253. Not sure if it pertains exactly to your issue.

Similar Messages

Can't Print more than once without restarting MBP using gutenprint

Hi I am using gutenprint 5.2.6 for my HP laserjet 5P. I can print a document once but when i try to print another document, it does not print +(it shows up in the print query but does not get sent to the printer) . I have to restart my MBP to print something else. even if i try to pront the same document twice, it only prints once. Anyone know how to fix this problem?
thanks,
Push

make sure you have the latest drivers
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=15011&prodTypeId=18972&prodSeriesId=25481&swLang=8&taskId=135&swEnvO ID=4082

Can you print more than one photo on a sngle page in iPhoto, as you can in Picasa?

iPhoto printing--
Can you print more than one photo on a single page in iPhoto, as you can in Picasa? Terrible waste of paper and time to do it one at a time! I 've been away from Macs for several years ( I know, shame on me) but I thought I remembered more printing flexibility. Help, anyone?

Yes - select the photos and print - select the print size and paper size (be sure they will fit with some small borders) and click customize - in settings select multiple photos per page (the preview will reflect this selection) and print
LN

Re: Can't print more than one page of a PDF

I have Acrobat and Reader 9.3.3. With either program I can't print more than 1 page of any PDF despite changing settings. What will fix this problem? Thanks in advance for your help.

Adobe strongly recommends that you should NOT have Acrobat and Reader installed on the same system. They have the bad habit on stepping on each other's files. You do not need both programs to read PDF files.
You should uninstall Reader and repair Acrobat. I also recommend that you restart after removing Reader and after repairing Acrobat.
Good luck.
Ken Friedman

Can't print more than 75 reports... Load report failed

Hi,
I have a problem: I can't print more than 75 reports without restarting my application.
I'm using VB, Visual Studio 2005 and Crystal Reports Developer XI Release 2.
It's a windows application.
In the following examples I'm exporting to pdf but the same hapens if I put it on a viewer.
I tried to do some tests to find out the problem. I don't have a solution yet
Test 1:
I made a cycle printing 100 times the same report. I used the code from an example that was in the BusinessObjects website and just put it into a cycle. At 75 I get the error "Load Report Failed"
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
Dim ExportFolder As String = Application.StartupPath + "\export"
If Not IO.Directory.Exists(ExportFolder) Then
IO.Directory.CreateDirectory(ExportFolder)
End If
For i As Integer = 1 To 100
Dim crReportDocument As ReportDocument
Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
''The path/location where the exported file will be saved
Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
''Create an instance of the Chart report
crReportDocument = New Chart()
''Set the options for saving the exported file to disk
crDiskFileDestinationOptions = New DiskFileDestinationOptions()
crDiskFileDestinationOptions.DiskFileName = exportFilePath
crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
''Export the report
crReportDocument.Export()
Next
Test 2:
I try to insert a "crReportDocument.Dispose() after the Export. It takes more than 1 minute doing the dispose and lots of time processing the 2nd report (more than 2 minutes)
Dim ExportFolder As String = Application.StartupPath + "\export"
If Not IO.Directory.Exists(ExportFolder) Then
IO.Directory.CreateDirectory(ExportFolder)
End If
For i As Integer = 1 To 100
Dim crReportDocument As ReportDocument
Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
''The path/location where the exported file will be saved
Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
''Create an instance of the Chart report
crReportDocument = New Chart()
''Set the options for saving the exported file to disk
crDiskFileDestinationOptions = New DiskFileDestinationOptions()
crDiskFileDestinationOptions.DiskFileName = exportFilePath
crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
''Export the report
crReportDocument.Export()
' Dispose
crReportDocument.Dispose()
Next
Test 3
Same as Test3 but with ReportDocument.Close() before the dispose.
Still doesn't work, Close takes too long, just like Dispose...
Test 4
I tried using a global variable with the ReportDocument.
Instead of creating new instances of the ReportDocument, I keep using the same.
It works fine if I use always the same report file, but if I try to print 2 different reports the 2nd returns the error "Load Report Failed" and takes too long loading before the error.
Well, I made some researches on internet and I foud this, but still doesn't work with me, because Dispose always takes too long...
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2006/02/22/236.aspx
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2006/05/23/328.aspx
http://www.arquitecturadesoftware.org/blogs/hugobatista/archive/2007/04/05/CrystalReportsMemoryLeakFixByJerryCote.aspx
Can anybody help?
Thanks
Isabel
Edited by: Isabel Cabral on Aug 12, 2008 8:12 PM

Already tried that, then I get another problem...
After exporting the first report, takes 1 or 2 minutes doing the Close and the Dispose, and after that it takes too long trying to load the next report (after 1 hour I give up!).
This is the code I'm using to do the tests:
        'Create the export folder
        Dim ExportFolder As String = Application.StartupPath + "\export"
        If Not IO.Directory.Exists(ExportFolder) Then
            IO.Directory.CreateDirectory(ExportFolder)
        End If
        For i As Integer = 1 To 100
            Dim crReportDocument As ReportDocument
            Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
            ''The path/location where the exported file will be saved
            Dim exportFilePath As String = ExportFolder + "\exported" & i & ".pdf"
            ''Create an instance of the Chart report
            crReportDocument = New Chart()
            ''Set the options for saving the exported file to disk
            crDiskFileDestinationOptions = New DiskFileDestinationOptions()
            crDiskFileDestinationOptions.DiskFileName = exportFilePath
            crReportDocument.ExportOptions.DestinationOptions = crDiskFileDestinationOptions
            crReportDocument.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
            crReportDocument.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
            ''Export the report
            crReportDocument.Export()
            'Close and dispose
            crReportDocument.Close()
            crReportDocument.Dispose()
        Next
Thanks,
Isabel

Permissions Error if Script is run more than once with out closing Diadem

I am in a REAL pickle here and need some HELP......
I get a permissions error message when I try and run my scripts more than once with out closing Diadem 2011.
Call scriptinclude ("D:\_Calterm_Configuration_Files\Technical_Information\DIAdem_Scripts\Importing Multiple Data Logs_CaltermIII_Local.VBS")
Error is around this portion of script:
'******* GetFilePaths() *** *** NEW Function ***
Function GetFilePaths(DefaultDir, ExtFilter, MultipleDir, Msg)
Dim i, k, f, fso, iMax, FileListPath, StartIdx, CurrFiles, FileList
' Promt the User to select the ASCII files to load with a File Dialog
FileListPath = AutoActPath & "FileDlgList.asc"
Set fso = CreateObject("Scripting.FileSystemObject")
StartIdx = 0
ReDim FileList(0)
Do ' Until (DlgState = "IDCancel")
Call FileNameGet("ANY", "FileRead", DefaultDir, ExtFilter, FileListPath, 1, Msg)
IF (DlgState = "IDCancel") THEN Exit Do
' Read in the saved list of file(s) selected in the File Dialog into FileList()
**** This next line is where the ERROR happens *******
Set f = fso.OpenTextFile(FileListPath, 1, True) ' f.ReadAll returns file contents
CurrFiles = Split(vbCRLF & f.ReadAll, vbCRLF) ' turn file lines into an array
f.Close ' close the file
iMax = UBound(CurrFiles)
IF iMax > 0 AND Trim(CurrFiles(iMax)) = "" THEN
iMax = iMax - 1
ReDim Preserve CurrFiles(iMax)
END IF
Call BubbleSort(CurrFiles) ' sort the array of file names alphabetically
' Append current file dialog selection(s) to any previous file dialog selection(s)
IF iMax < 1 THEN iMax = 0
ReDim Preserve FileList(k + iMax)
FOR i = 1 TO iMax
k = k + 1
FileList(k) = CurrFiles(i)
NEXT ' i
IF MultipleDir <> TRUE THEN Exit Do ' forces only 1 dialog, good if all desired files are in the same folder
Loop ' Until (DlgState = "IDCancel")
GetFilePaths = FileList
End Function ' GetFilePaths()
266 6:18:34 PM Error:
Error in <NoName(1).VBS> (Line: 8, Column: 1):
Error in <Importing Multiple Data Logs_CaltermIII_Local.VBS> (Line: 140, Column: 5):
Permission denied
I can send the script and file I am loading if that would help.
Solved!
Go to Solution.

Jcheese,
I understood that if you call this script within DIAdem you don't get any error, however, when you run that script from another source (with DIAdem opened) for the second time you get the error, right?
If this is the case, I think it might be that the file haven't close correctly in the script. Could you upload the script file?
Carmen C.

How to call the same query more than once with different selection criteria

Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
                     Income 2008 Income 2009
Customer A       10                 20
Customer B        30                  0
Sales organization YY
                     Income 2008 Income 2009
Customer A        20                5
Customer B        50                10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.

Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J.

Can we have more than One DC for the sales organization and Plant combo?

Can we have more than One DC for the sales organization and Plant combination?
If yes can you please site a practical example to clear the picture

Hi
First of all in SAP sales orgs are assigned to distribution channels and the combination of sales org and distribution channel which is called distribution chain is assigned to plant
There is no direct link between sales org and plant or distribution channel and plant
So sales org and plant combination doesnot exists and
it is only sales org and dist channel combination which is called as distribution chain only exists
Nowhere in SAP we are assigning sales org to plant
It is because sales org alone doesnot make sense and its combination with dist channel only makes sense
because sales org is a selling org and the distribution channel is the route to sell and this combination has only to pick the material from plant to process sales to customers
The relation between sales org and distribution channels is many to many and also vice versa
Multiple sales orgs can be assigned to one distribution channel and
Multiple distribution channels can be assigned to one sales org
Similarly the relation ship between Distribution chain (sales org+dist channel) to plant is also many to many and vice versa
Similarly plants from other company codes can also be assigned to Distribution chain to facilitate intercompany processes
In whatever way look at it the multiple distribution channels can be fit anywhere
Regards
Raja

Can u use more than one apple account on your device and itunes

Can u use more than one apple account on your device and itunes

Yes, but you have to logout of one, and login to the other.
If it is an iPhone/iPad/iPod Touch and you buy apps on different accounts, when it comes time to update an app, you have to specify the password for the account used to acquirer the app. You change an iOS account via Settings -> Store -> Apple ID (tap on it), and start by logging out and then you can enter the other Id
So it is possible, but it can also be a pain.

Can I change more than one photo from color to black and white at one time?

can I change more than one photo from color to black and white at one time?

Check out iPhoto Batch Enhancer
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

How can I print more than 16 lines in an invoice PLD

Hello, Im currently using SAP 2007 SP1 PL09.
I cannot print more than 16 lines in my PLD invoice. I have tried making the repetitive area longer, making the end of report and the page footer shorter, I tried setting the "lines in repetitive area" to 50 and I also increased the max rows per page and the only thing that seemed to work was setting the "print with vertical compression" in the invoice print preferences to a value under 100.
is this the only way I can solve my problem?
Thanks,

Hello neito
Jst increase the height of the layout go to doucment properties change the height there to 1200 and see u can get more than 26 records per page
Regards Jenny

I can't print more than 1 copy in Adobe Reader X

I've recently come across an issue with a workstation that is unable to print more than one copy of a PDF file.
When you increase the quantity to print multiple copies, it still just prints one copy only.
I've downloaded the latest version of Adobe Reader but this has not corrected the issue.
Any advice on this would be much appreciated.
Regards, Mel

I would be inclined to reinstall your printer drivers, if reinstalling Adobe Reader hasn't resolved it.
Go to the web site of your printer manufacturer - then click on "Support" or "Downloads" to get the latest drivers.
One thing you can try as an alternative is print to another printer and see if you still have the same issue - you can then narrow it down to being an Adobe problem or a printer software problem.
If you don't have another physical printer installed, check to see if you have a virtual printer like "Microsoft XPS Document Writer" or "Microsoft Office Document Image Writer".
Both of these 'virtual' printers will print your document as a file that you can view on screen which is good for testing purposes. If you have the same problem with another printer or one of these virtual printers then the problem may be with Adobe Reader.
What happens when you print other types of documents such as Word documents?

Can't print more than one job at a time.

I am trying to print to either a HP DesignJet 1055cm plotter or a HP LaserJet 5000N. I can't send more than one file at a time. If i don't wait until the current job starts printing, the next one won't print. For example if I sent five files one right after the other, I might get 1, 4 and 5. I don't think it's a printer problem because it happens on two different printers, and it doesn't happen when I print from my PC. Any idea what could cause this?

My work around is to put all the jobs "on hold" in the print settings or just "stop jobs" on the printer window.
Then I click on each print job in the que and let them print one at a time. This way I can at least quit the program and move onto the next thing.

How can I print more than one slide per page from the iPad????

Im having problems printing from the iPad. I want to print more than one slide in one peace of paper. 3, 6, 9 ...
Can any one help?

Start the print process and click on the Custom layout. At the bottom you can set the size of the image desired and see how many photos can be placed on the page size selected.
OT

Can't print more than once with my epson epl-5800L and airport express

Similar Messages

Maybe you are looking for