Can't publish file...

I'm having a very strange problem publishing a file in Flash
8. Heres the situation. I have a flash file that uses an include to
pull in a script file. This script file references classes that are
organized into packages and the classes use Flash Remoting. On my
PC at home and another PC here at the office the FLA publishes
without problem. On any of the Mac's here however, it refuses to
publish and gives me errors saying that it cannot locate the
refferred to classes in the included script. I have re-installed
Flash, checked all file permissions, checked the ActionScript class
path and have re-created the FLA file entirely. Everything appears
to be perfectly fine and the files being used are identical copies
from one system to another. Does anyone have any idea why this
publishes fine on Windows but not on Mac??

So I tried one last thing and that is to take all my outside
actionscript files, remove them from their packages and place them
in the same directory as the FLA file. I also had to rename one of
the classes but at least now it publishes. Although this honestly
is a huge annoyance because I dont want to have a single directory
with a thousand files in it. So i'm thinking this is some odd Mac
file system path problem? I'd really appreciate any insight I can
get to fix this because its truly frustrating.

Similar Messages

Client can't publish files with 4.0

I'll first start by saying that my client has been happily
editing and publishing files since February. Recently, she was on
vacation so I made a couple of minor updates using Dreamweaver. Now
she's back, and is no longer able to publish. I'm not sure it's
related. The error message is:
"Contribute encountered a network or file system error.
Please try the operation again, and contact the administrator if
the error continues to occur."
The problem started yesterday, but briefly corrected itself.
Now she can't publish at all. I have asked her to go step-by-step
through the process of editing files and I can see the following
activity on the server:
-- She opens the file (index.html) and the following file
appears on the server: index.html.LCK
-- She hits "publish" and the following file appears on the
server: index.html.new
-- Then the error message appears for her.
When she closes the page, the index.html.LCK page disappears,
but the index.html.new sticks around.
Interestingly, the .new file is 0k.
We turned on I/O logging, but all it does is confirm that the
PUT isn't happening. However, there are lots of complaints about
missing files on the local drive. They run Active Directory on
their network, and I'm curious if there could be some kind of
mapping problem with their user settings directories, and
Contribute is getting hung up when it tries to PUT the changes.
I'd appreciate any help troubleshooting this issue or any
tips before I call Adobe. :)
Thanks!

I am also facing tghe same problem today. I cannot believe I
was unable to find a single help on this. i've been trying many of
the options but things are getting worse and worse. Now I can't
publish from Dreamweaver and Contribute also!! Why Adobe doesn't
support the ones who upgrade their software?
quote:
Originally posted by:
akaijen07
I'll first start by saying that my client has been happily
editing and publishing files since February. Recently, she was on
vacation so I made a couple of minor updates using Dreamweaver. Now
she's back, and is no longer able to publish. I'm not sure it's
related. The error message is:
"Contribute encountered a network or file system error.
Please try the operation again, and contact the administrator if
the error continues to occur."
The problem started yesterday, but briefly corrected itself.
Now she can't publish at all. I have asked her to go step-by-step
through the process of editing files and I can see the following
activity on the server:
-- She opens the file (index.html) and the following file
appears on the server: index.html.LCK
-- She hits "publish" and the following file appears on the
server: index.html.new
-- Then the error message appears for her.
When she closes the page, the index.html.LCK page disappears,
but the index.html.new sticks around.
Interestingly, the .new file is 0k.
We turned on I/O logging, but all it does is confirm that the
PUT isn't happening. However, there are lots of complaints about
missing files on the local drive. They run Active Directory on
their network, and I'm curious if there could be some kind of
mapping problem with their user settings directories, and
Contribute is getting hung up when it tries to PUT the changes.
I'd appreciate any help troubleshooting this issue or any
tips before I call Adobe. :)
Thanks!

How can I open a microsoft publisher file on my ipad

I have a bunch of publisher files I need to port over and can't find a program to open them with. I have tried keynote, pages, documents to go and quickoffice. Please tell me there is something out there instead of having to redo them all.

Sorry, Publisher uses a proprietary format that only Publisher itself could open. I'm not aware of any application for an iPad that can open those files. There are some third-party services that purport to be able to convert Publisher files to .doc, but I don't know if those services work well. Otherwise you'll have to copy out the objects and text in the Publisher file and paste them into a Word document which you could then open on the iPad in Pages, Documents To Go, or another app that can edit Word documents.
There are also products and services that say they can convert Publisher files to PDF, if you just need to be able to view them on the iPad.
Regards.

I received a ms publisher file what program can i use to open and edit

i received a ms publisher file what program can i use to open and edit

There is no program that can open Publisher files except Publisher. It doesn't matter whether you use Windows or a Mac, Publisher files must have Publisher.
Publisher does not have a Mac version so you will need Windows (and Publisher)

Can XML Publisher add a digital certificate (cert.pfx) via the xdo.cfg file or do I need to upgrade and use BI Publisher instead?

Hi Guys
I need to add a digital certificate to a clients customer statements and invoices. XML Publisher 5.6.3 has been used originally to design the templates as RTF. I have the following questions please...
1. Can an RTF template be used or do I need to convert it to a pdf template?
2. Can XML publisher even be used or do I need to get the DBAs to install BI Publisher. XML Publisher doesn't even have the signature properties in the admin screens that BI Publisher has.
Below is a copy of the xdo.cfg file which currently does not add the pfx file...
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
<properties>
   <property name="system-temp-dir">/tmp</property>
   <property name="pdf-security">false</property>
   <property name="pdf-open-password">testpass</property>
   <property name="pdf-permissions-password">testpass</property>
   <property name="pdf-encryption-level">1</property>
   <property name="pdf-no-printing">true</property>
   <property name="pdf-no-changing-the-document">true</property>
   <property name="signature-enable">true</property>
   <property name="signature-pkcs12-path">/app/oracle/product/appldev/apps/apps_st/appl/xdo/12.0.0/resource/digcert.pfx</property>
   <property name="signature-pkcs12-password">testpass</property>
   <property name="signature-field-location">top-left</property>
   <property name="signature-reason">taxreasons</property>
   <property name="signature-signed-at">Cape Town</property>
   <property name="signature-display-style">detailed</property>
</properties>
</config>
Any help will be greatly appreciated.

thanks for the summary of the many posts and threads describing all of these steps.

How can I publish an ics file to a remote server from my calendar server?

I am running Lion Server and have Calendar Service up and running. I have an account with a couple of calendars, one of which I'd like to publish to a remote server, as an .ics file.
From an iCal client it is possible to publish local calendars, but not remote calendars (for which the only option seems to be to 'Share').
How can I can I publish an ics file to a remote server? Programatically, if necessary.

I have this working now.
curl -s --digest -u username:password -o calendar.ics http://hostname:8008/calendars/users/username/calendar/
generates the .ics file, and a combination of cadaver (from webdav.org) and an expect script upload hourly (via cron) to the remote server:
set timeout 60
spawn /usr/local/bin/cadaver
expect "dav"
send "open https://remotehost/path/\r"
expect "Do you wish to accept the certificate? (y/n)"
send "y\r"
expect "dav"
send "put calendar.ics\r"
expect "dav"
send "close\r"
expect "dav"
send "quit\r"

Can't publish larger files in iWeb 09

Hi
Have recently updated my iWeb to 09 and had accidentally deleted my old Domaion file so had to rebuild site from scratch. Anyway, since I have, it gets stuck on pages that have any larger files on them (movie and audio files) despite having plenty of space in my MobileMe account. I get "Try again later" message.
Have managed to publish successfully to a local folder which I then tried copying with index to 'Sites' on my iDisk but that that too presents a problem saying "The Finder cannot complete the operation because some data in "" could not be read or written. (Error code -36)
I'm baffled! All I want to do is publish my site without any hassle, the files aren't that big only about 40 MB each. Can anyone suggest anything? Have had a look at iwebfaq and on here and have tried a few things but nothing seems to help so far. Any suggestions would be very gratefully received! Thanks!

That error code is -36 ioErr I/O error. Can you publish a different site? Crate a small test site and see if it will go thru. If not then it's not just your primary site.
If you expect to revise the site occasionally or want your visitors not to have to wait for those large files to load while the host page loads you might look at these ways to add a movie or audio file.
Movie: QT Movies and Opening Item in New, Specially Sized Window. The code used is shown.
Audio: Flash Audio Players - 3 different types of flash audio players. The code used is shown.
These methods require loading the movie or audio files only once and do not load on the pages until they are played.
OT

How can I publish my flash movie in one swf file in V.2

Hi
When I publish my movie to flash format , skin swf file is
segregated from main movie swf file . How can I publish my movie
only in one swf file ? I want to merge skin and main movie files
together in one swf file .

Hi Corona,
The screen size is whatever you captured or specified during
the recording or new movie setup process. This will cause the
playback control to be placed "on top of" some portion of the
captured background, but there are two ways around that problem.
1) When you set the red recording area before recording, drag
the bottom of the recording area downward about 35 pixels below the
application window (assuming you are capturing an area that
includes a "bottom" or even an application window - grin). For this
to work, it is best if you do your recording against a
solid-one-colored desktop background, so the "extra" area at the
bottom doesn't include desktop images that you don't want in the
capture (even though that area will not be visible in the end ...)
OR...
2) Use the Project > Resize Project dialog to increase the
palette size on the bottom, taking care to leave the original movie
the same size. This will effectively do the same thing as
Suggestion #1, create a "blank" area at the bottom of the movie on
which there is room to mount the playback control bar.
Best of luck, Corona, and omid02. Hope this helps, in
conjunction with the advice that Rick has already offered.
.

How can I get my published files in a folder back to Iweb? Iweb files deltd

I have accidentally deleted the original files in Iweb for a site I have created and ftp up to a host, so they don't even exist in the domain.sites folder location it seems now and they were never uploaded to .mac.
I have published them to a folder on desktop and was wondering if anyone knows how I can get those files back into Iweb for editing?
HELP PLS!!

Stelle:
Welcome to the Apple Discussions. Go to Varkgirl's iWeb Tips and Tricks site and download her Automator application for backing up your Domain.sites file on a daily basis. That can prevent this situation in the future. Run it after any changes have been made with iWeb.

Does the DPS publishes only for tablets? can I publish my indesign file to html only using DPS?

Does the Digital Publishing Suite publishes only for tablets? can I publish my indesign file to html only using DPS?

DPS will not do what you want and neither with anything else without at
least some work.
HTML out of InDesign is for content only, not layout. There is a new
product out there you can try, however:
http://ajarproductions.com/pages/products/in5/
Bob

How can I VIEW publisher files?

I've skimmed the forums and all I can find is that I need to convert it to a pdf to view it. How do I convert a .pub file to a pdf?
Or any other suggestions?
Thanks!

Ok, I guess the answer is it can't be done.
I have been given a publisher file to look at, but I am understanding it can only be viewed in Windows, using Publisher, correct?
I know how to save them in different ways when inside publisher, etc. But I am not making this file or manipulating it, just receiving it. The problem is that I do not currently have access to windows and just wanted to look at this file.
Does anyone know if Apple is working to make Pages open these? Or Previewer? Why can we open .docx and .xlsx but not .pub? Is there some proprietary license happening here that is not in place on the other Office apps?
Thanks.

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

this is a perfect question for the users in the iWeb forum. https://discussions.apple.com/community/ilife/iweb. Good luck.

I am using Microsoft office 2011 for mac, publisher is not included, meanwhile I have publisher files saved from windows, is there any recommended software I can install on the mac so that I can open the files?

How can I be able to use my Windows publisher files on my Mac computer, since Microsoft office 2011 for Mac doesn't have Publisher? What's most recommended software to use for this purpose?

Just an FYI here Allan, and clinton.
Version 4.0 or newer of Libre Office can open and edit Publisher files, this is fairly new, you may not have noticed it yet,
I tested it last week for another OP, it works very well, so finally there is a Mac application that can replace Publisher.
Here's a link to the post.
VikingOSX deserves the credit for finding it.

Can't publish or "put" files to remote server

Dear All,
I can't publish my website to the remote server, even though everything seems to be working properly with connection to the remote server. No error messages and the successful connection message appears. I have emptied out the Safari cache but still do not see the updates appearing on the website. I'm working with Dreamweaver CS5.5 on a Mac Pro with Snow Leopard 10.6.8. Very frustrating.
Small Town Gal

Small Town Gal wrote:
The root directory is blank.
According to NetSonic's website, the root directory should be "public_html"
http://helpdesk.netsonic.net/support/index.php?/Knowledgebase/Article/View/104/13/ftp-file zilla-tutorial

Captivate 4 can't publish or preview files/sound layers appear black

After re-installing Captivate 4, I was unable to preview or publish files. Additionally, my sound layers appeared as black, empty layers.
I had a difficult time finding a solution, so I wanted to post it here in case somebody else has the same problem.
I was indicating in my searches that I was unable to publish or preview files in C4 and could not find a solution, then I switched the focus of my searches to the audio layers and that's when I found a solution at: http://blogs.adobe.com/captivate/2009/03/adobe_captivate_4_installation.html
Now, I have to say this for anyone who may not be aware. You should always back up your registry anytime you make changes to it and that changes to the registry can cause problems. Having said that, here is the fix I used:.
Adobe Captivate 4 Installation Issues on Microsoft Windows XP
You can use SubInAcl tool from Microsoft to try fixing the permission issues in the Windows Registry.
Close all instances of Adobe Captivate and do the following steps -
1) Download the SubInAcl tool from Microsoft Download Center and install it.
2) Download this zip file
3) Extract the zip file in a temporary folder. You will get two files - restoreRegPermCP4.bat, restoreCP4regentries.bat
4) Copy the restoreRegPermCP4.bat to the folder which has SubInAcl.exe installed. Typically this would be at C:\Program Files\Windows Resource Kits\Tools\.
5) Double click to run the restoreRegPermCP4.bat file.
6) Copy the restoreCP4regentries.bat to the folder in which Captivate 4 is installed. Typically it is at C:\Program Files\Adobe\Adobe Captivate 4
7) Open command prompt and navigate to that folder.
8) Type restoreCP4regentries.bat and press enter.
9) Make sure that all the messages that popup say "DllRegisterServer in 'some dll name' Succeeded"
This should have fixed the registry issues and things should work fine.
I hope this saves someone hours of searching for a solution.

So glad it helped you! I know what you mean about Adobe.
Take Care!
Tannia Elsworth
Senior Instructional Technologist,
Training Services
Products & Support
Amadeus North America, Inc.
T: 1 305 499-6522
F: 1 305 499-6964
[email protected]
Amadeus e-University® Website
Amadeus e-University® Blog
568568568568 <[email protected]>
To
Tannia Elsworth <[email protected]>
cc
bcc
Subject
Captivate 4 can't publish or preview files/sound layers
appear black
568568568568 <[email protected]>
Please respond to :
[email protected]
06/24/2009 04:01 PM
tannia: Thanks for your post. I have been struggling with this issue for
over a year. I have a serious love/hate relationship with Adobe. If it
weren't for folks like you, I'd swear off any and everything they make.

Can't publish file...

Similar Messages

Maybe you are looking for