Can't record sound from DVD player

I just built a new DAW with a Gigabyte MoBo that has the Realtek sound chip on board. I installed an M-Audio external Fast Track Pro connected to the computer with USB 2.0. With the two sound devices I can play Band in a Box (my main band) through the Realtek and out put to my mixer. I then use my Line 6 Pod XT as a preamp to my guitar that also goes to my Behringer mixer. I connect the main out (R&L) from the mixer to the 1 and 2 inputs on the M-audio. I set Audio Hardware setup in AA3 to use the M Audio device for input and am able to record mixer output to tracks in AA3. I tried several configs and this is the only one that I found that works. All is good so far.
I installed a SATA DVD player (Lite on 24x) that works fine, but it plays through the M-Audio via USB, bypassing the Realtek chip, and the sound does not show up in AA3. I'm thinking I need to route the DVD output to the mixer to use the channel that is already set up. I've been trying to output the DVD player through the onboard Realtek but can't find any way to direct it to do so. I don't necessarily need it to play through the Realtek, but I want to be able to record from the DVD player.
So, does anyone have any idea how to direct the output of the DVD player to the sound card of choice? I'm stumped.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Similar Messages

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

No Sound From DVD Player

I received my new (refurb.) 15" PB today. Everything works great except I can get no sound from Apples DVD player. CDs, iTunes, system sounds etc. all work correctly. Audo output is set to System Sound Output in DVD Preferences. Using VLC I get DVD sound but lots of dropped frame errors. Any suggestions?
15" PowerBook Mac OS X (10.4.5)

I'm having the same problem. I can play the video part of a DVD but no sound. Audio CDs and Windows sounds work fine. Does this mean I'm missing a DVD codec or is there a software setting I'm missing. The Nvidia codec costs money. Is there a free codec that will fix this? This is with Windows XP and Audigy 2 LS.
cruzmisl wrote:
Ok I figured it out. I downloaded the Nvidia codec and it works fine. Shouldn't all the sw be aailable with the soundcard though? I really don't want to pay $40 for a codec I do not have the spdif bypass selected.....
Any ideas?
Thanks,
J.

Could i play sound from DVD Player to my stereo?

I have iBook with Airpot Extreme card. I want to buy Express station. Is there is somebody who did try to broadcast sound to express station from something different than iTunes? May it is just impossible?

Before you buy one for this purpose, you must realize that you're liable to be frustrated trying to get the audio to sync with the video. In fact, you'll have to use an app other than Apple's DVD Player in order to get the sync halfway close, and even then you'll likely never get it perfect.
VLC is one possibility. You'll need to use the audio delay option with a negative offset to advance the audio ahead of the video a couple of seconds to compensate for the Airport Express prebuffering delay.

Can i record sound from my imac intel soundcard

can I record from my soundcard. I have tried Audacity but cabn't see my soundcard on the drop down menu. Thanks, Gooner321

Install these apps they will help you pick the right input source
http://www.macupdate.com/app/mac/11334/soundsource
http://www.macupdate.com/app/mac/14067/soundflower

Can you play ipad via DVD player

Can you record using your DVD player and ipad

You can stream unprotected DVD from your laptop's DVD player to your iPad using VLC Streamer.
https://itunes.apple.com/sg/app/vlc-streamer/id410031728?mt=8&ls=1

Recording sound from the PC

I am currently running a mixer into the front audio input jack on my PC, and have all external stuff (mic, mini disk, etc) coming through that.
Am I able to set up audition so that it can also record sound from the PC. For example, if I want to grab audio from a you tube video, or have an online voice chat or something enabled, can I open audition and record it? I have tried, but not been successful. My only idea is having to run the audio out of the PC, into a channel in the mixer, and then back into the PC with everything else.
Any help?

Evergyro wrote:
Where is the link?
This so-called 'forum' has absolutely no use for its FAQs any more. Fortunately, AudioMasters has saved them all, and you can find that particular one here.

Is there a way i can record sound from my computer?

i am trying to record sound from a dvd. can this be done using garage band or itunes?

I heartily agree with the use of the "WireTap" software--it records CD quality AIFF files (saves them as QuickTime) of any sound playing through your computer and is verrrrry easy to use. It used to be free (which is how I got it via versiontracker awhile back) but it is now available in a "pay" version. Free versions are readily available on old MacAddict software discs from a year or so ago. If you need that version, feel free to email me and I'll send you a spare.
Best,
Yusuf Lamont
G4 Dual 800 Quicksilver 1.5 GB RAM, SuperDrive Mac OS X (10.3.9) 3 HDs (80GB-system, 160GB scratch, 160GB media)

Record sound from microphone with flash player lower than 10

Hello,
Is it possible for me to record sound from a microphone using a lower version of flash player, say Flash Player 9?
Thanks
PM

As I know it's possible with Player 9:
Package
flash.media
Class
public final class Microphone
Inheritance
Microphone EventDispatcher Object
Language Version :
ActionScript 3.0
Runtime Versions :
AIR 1.0, Flash Player 9

Hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

Hey ErikSimon, I kept troubleshooting my problem last night and when I loaded my samples an alternate way, actually the longer way, it worked. I think I have gremlins in the system or something, but I got it working again. I was having the issue when I tried loading the samples via these instructions that were mentioned in SFLogicninja's Youtube video @ 3:07
http://www.youtube.com/user/SFLogicNinja#p/u/8/7YjgKLZ2jpY
They are good instructions, but the Logic gods weren't smiling on me last night. Really weird and frustrating at the same time. Thanks anyways.

G5 with no sound from DVD's

Here's a strange new problem...
I CAN play a CD thru iTunes.
I CAN get tones for clicks, beeps, etc when I change settings on the Sound Preferences panel.
But, when I work on a DVD Tutorial, I can't get the sound from the DVD. And it's not one DVD... it's several.
What's happened?

I no longer have sound with DVD Player. I checked the audio output setting under preferences - there really wasn't much to select. Audio output was set to System Sound Output (the only choice) and "Disable Dolby dynamic range compression" was not selected. I have a MacBook, OS X 10.4.11. The DVD Player is version 4.6.5, Framework version 4.7.0. Was working fine and then when I tried to watch a DVD that I had been watching the night before, there was no sound. The video part if fine. The DVD is fine on a standard DVD player. Sound is fine using iTunes. Any suggestions appreciated.

I'm downloading my dvd:s to iTunes but some of them doesn't show in finder, I can view them in the dvd-player but I can't access them in Handbrake. Why?

I'm downloading my dvd:s to iTunes but some of them doesn't show in finder, I can view them in the dvd-player but I can't access them in Handbrake. Why?

from the Apple Support Communities -Terms of Use:
Do not submit software or descriptions of processes that break or otherwise 'work around' digital rights management software or hardware. This includes conversations about 'ripping' DVDs or working around FairPlay software used on the iTunes Store.
https://discussions.apple.com/static/apple/tutorial/tou.html

I cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

i cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

Did you already reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
If this does not help, try to set it up as new device, explained here:
How to back up your data and set up as a new device

Can you record sound using a USB 6211 and convert the data to a .wav (or other sound) file?

Hello,
I am trying to build a system that will use a USB 6211 to record sounds from multiple electret microphones and then save the data as a .wav file or other sound file. I have already built my mics and hooked the mics up to the USB 6211; the DAQ device seems to do an adequate job recording the signal - I've recorded from 3 mics at a time at 11,025 Hz, although I don't know how good the signals are since I can't save them for playback after the fact, and they aren't going through my sound card. Ultimately, I would like to save the data as a multichannel audio file which I could then open in a program such as Audacity for further editing and analysis. Since Audacity can import a variety of sound files, my file format doesn't need to be .wav if another format would work better.
Any advice would be appreciated.
Thanks, Eric

If you are sampling all three simultaneously, your highest frequency recordable will be (11,025/2)/3, so about 1800Hz and that will pretty coarse (traditionally digital sound recording is at 44Ks/s at the low end). As to converting to a .wav, there are functions on the "Graphics and Sound" palette for saving waveforms to a .wav file.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Can't record sound from DVD player

Similar Messages

Maybe you are looking for