Can't remote connect to Integration Services 2008 r2 with 2012 Management Studio

I am getting a Connect to Server error "Class not registered" followed by the trying to connect to 2005 information. It is not a named instance. I don't get the error when connecting with Management Studio 2008. Any ideas. Everything else is
all set up properly..

Can you try this workaround and see if it works?
http://www.ssistalk.com/2012/03/21/connecting-to-a-pre-sql-2012-ssis-instance-with-sql-2012-ssms/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

SSIS: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher

We have SSIS installed on a machine that is not part of a cluster but it is accessible by the cluster.
Our job we have running on the cluster is failing with the following error:
Error: 2014-01-31 09:14:37.52 Code: 0xC000F427 Source: SCR - DP1 Connections
Description: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher. End Error
Any advice or information on how to resolve this would be great.
Many Thanks.

Hi NessaBella,
Integration Services service is not a cluster-aware service, and does not support failover from one cluster node to another. Therefore, in a clustered environment, Integration Services should be installed and started as a stand-alone service on each node
in the cluster.
Based on the error message, it seems that SSIS is not installed on the cluster node on which the job was running. Although SSIS is installed on a machine that is not part of the cluster and can be accessed by each cluster node, the SSIS service installed
on a remote server cannot be used a cluster node. So, please install the shared feature SQL Server Integration Services on each cluster node. Besides, if certain packages need to run in 32-bit mode in certain jobs and the SQL Server installed is 64-bit version,
you also need to install BIDS/SSDT on the cluster node to get the 32-bit runtime of SSIS.
References:
Integration Services (SSIS) in a Cluster
Loading and Running a Remote Package Programmatically
Regards,
Mike Yin
TechNet Community Support

How to enable remote connections in SQL Server 2008

I'm trying to enable remote connections in SQL Server 2008 R2 as described in the following article. I see the error message at the top of the article.
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx
One step in the article describes how to enable TCP/IP in Configuration Manager.  Specifically it says that
'SQL Server NETWORK Configuration' should have TCP/IP enabled.
The issue I've encountered is that my Configuration Manager
is different than what appears in the article. My Configuration Manager shows the following:
SQL Server 2005 Services
SQL Server 2005 Network Configuration (32 bit)
      - Protocols for SQLExpress
SQL Native Client Configuration (32 bit)
       - Client protocols
       - Aliases
Note that I see 'SQL Server 2005 Network Configuration'
rather than that for 2008. When 'Protocols for SQLExpress'
is expanded, there is a TCP/IP setting, but it's disabled and I see an
Access Denied message if I try to enable this.
I also see a TCP/IP setting under Client protocols and successfully enabled this. This uses port 1433 and I configured my firewall to accomodate this port as suggested in the article.
I also followed the other steps in the article, but still don't have remote access to SQL Server 2008 R2. (I can access it from the office.) I'm wondering if this remote access issue is because SQL Server
2008 Network Configuration does not appear in Configuration Manager
and if so, I'm interested in how this might be resolved. (I'm running Windows 7 - 64 bit.)
I'd appreciate any ideas on this. Thanks.

Hello,
Please refer to the following resource.
http://support.microsoft.com/kb/KbView/914277
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

BIAPPS 7.9.5.1 Failure connecting to integration service

Business Intelligence 10.1.3.4.1
Biapps version 7.9.5.1
Informática Powercenter 8.1.1
After completing the installation according to the manual we have copied the hibernate libraries in DAC directory:
http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10742/anyinstadmwininstall.htm#i1105233
And also copied the Emergency Bug Files in Informatica:
Informatica Session Completing Successfully, but Still in Running Status
We have tried with Informática Powercenter 8.1.1 without Service Pack, and also applying the SP5, but we are getting the same error in DAC while making the Test Connection in both cases:
"Failure connecting to "integracion_informa"
STD OUTPUT
Informatica(r) PMCD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Righst reserved
Invoked at Fri Apr 16 13:29:52 2010
The command: [pingserver] is deprecated. Please use the commando [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [integracion_informa:4006]
Completed at Fri Apr 16 13:29:52 2010
ERROR OUTPUT"
cmd window:
"16-abr-2010 13:29:52 com.siebel.analytics.etl.client.util.DataVerification giveWarning
INFO: Unknown verification type!
16-abr-2010 13:29:52 com.siebel.analytics.etl.client.data.dataobject.UpdatableDataObject createUpdate
INFO: 0 calls to database avoided
DAC Command Line Utility Invocation"
There´s no other information about the error. Test connection for repository is correct.
We have done the installation many times, restarted the computer, restarted informatica services, restarted DAC server, verified in the Powercenter Admin Console that both (integration and repository) services are up...
Days ago, we have succesfully installed Biapps 7.9.6.1 and loaded PeopleSoft 9.0 data, but now we are trying to load PeopleSoft 8.8 and we are obligued to uses Biapps 7.9.5.1, because 7.9.6.1 have no connection with PeopleSoft 8.8.
Thanks in advance.
Edited by: user11179355 on 19-abr-2010 1:46

We have upgraded this repository to connect to it using DAC version 10.1.3.4.1 and we noticed that in Setup-Informatica Servers all the fields except Domain, had the values we entered using the previous version of DAC. This makes sense, because in the previous version of DAC (Biapps 7.9.5.1) you cannot enter the domain name.
If we try to connect to it without filling this field we get the same blank error. But if we fill it with the correct domain name the test ends succesfully. So if we could put the domain name in DAC Biapps 7.9.5.1 we might make it work.
Is there any place where you can put the domain name value in this version?
Does anyone know the table where this value is stored?

Can i remotely connect to my external hard disk from my iPhone/iPad?

Hello,
I just bought a new apple time capsule.
Can i remotely connect it with my mac without a static public IP?
I read that i can not reach it remotely anymore for iPhone en iPad since the last update, is that correct?
So than i want to connect my external connected hard disk. Is this possible with my iPhone or iPad?
I heard about filebrowser but it doesn't work well.
And what about apple TV, can i stream from my TC?
Can anybody explain how i can fix this?
Thx
Macbook Pro 2012, iPhone 6, iPad air 2, Apple TV

Apple have no method to connect iOS device to the TC at any time.. LAN or WAN.. so any method you use must come from 3rd party app.
I heard about filebrowser but it doesn't work well.
It works as well as any other app can. Remote access must be based on a network protocol and the only ones supported by Apple are AFP and SMB.
AFAIK people have not been successful getting AFP based file apps on iOS to work remotely although I have not checked closely for a while.
So you have to use SMB.. and at least filebrowser has instructions.
http://www.stratospherix.com/support/gsw_timecapsule.php?page=6remote
It is however unsafe opening SMB at any time. And I suggested people try it with different ports instead of obvious ones.. but that didn't work so why it needs to be 20445 I don't know.. but it does make it fairly obvious.
The alternative method which is really the only safe way to do this is using a different router.. one with built in vpn servers. These used to be expensive but you can buy them now for less than $100.. or use routers with 3rd party. You have to move the TC to being bridged and used as WAP and switch. However that is not a major issue. The vpn router will include a standard ddns client so that fixes not having static IP.
And iOS has good vpn clients built in or app add ons.
VPN is the right way to do this.
And what about apple TV, can i stream from my TC?
TC is a dumb hard disk in a router.. it has no media extensions. Apple TV is not a media player.. it is a streamer. So you must have an application which can stream from TC to the ATV which means you need a computer with iTunes or you need ipad and some software that can read files and stream it.. obviously apple built the system for itunes and itunes pretty much exclusively.
If you get a WD live TV it can play source material directly from TC.. because it is a true media player. Apple TV cannot.

Windows 2012 + hyper-v + mouse not captured in remote desktop session + integrated services installed

windows 2012 + hyper-v + mouse not captured in remote desktop session + integrated services installed

Hi,
I am using Server 2012 R2 with Hyper-V and CentOS 6.5 that installed GNOME.
Same no mouse on remote desktop session or on the host's Hyper management interface.
From my knowledge, CentOS from 6.4 build in include the IS, how do I update the IS in CentOS 6.4-6.5 guest OS? Any detail docunment for reference?
Thank you.

DAC Error: Connecting to integration service

Hi all,
I have followed all the steps as per the install guide. I went through the forum too but still have the below error. Able to connect to Repository successfully. But error while connecting to Integration service.
Failure connecting to "_______"
=====STD output=====
The command Pingserver is deprecated. Please use command [pingservice] in future.
Warning: Lost server connection
Error: Cannot connect to Integration service[host:portno]
======Error Output=====
There is one small change in the config.bat file. in the set JAVA_HOME Instead of using the path "C:\Program Files\Java\jdk1.5.0_07" I have used "C:\orahome\10gR3_2\jdk" since it has no spaces.
I am not sure if there is any problem with this path since the DAC server and client are running properly.
Also, when I run
C:\Documents and Settings\Administrator>pmcmd pingservice -s HostName:6001
it gives error:
Informatica(r) PMCMD, version [8.1.1], build [600.0831], Windows 3
Copyright (c) Informatica Corporation 1994 - 2006
All Rights Reserved.
Invoked at Wed Aug 11 14:17:05 2010
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [HostName:6001].
Completed at Wed Aug 11 14:17:46 2010
In environment variables - I have added Informatica bin paths and have also added INFA_DOMAINS_FILE.
I have read about the 2 EBFs for informatica to be extracted. Do I need them? I am using OBIApps 7.9.5 and Informatica 8.1.1.
Am not sure what is wrong now.
Any help is greatly appreciated.
Thanks.
Edited by: user522729 on Aug 11, 2010 2:42 AM

The integration service was running on a different port. Used the correct port and it was working.
Edited by: user522729 on Aug 16, 2010 4:40 AM

Why can't I connect to my home WiFi network with my new iPad Mini?

Why can't I connect to my home WiFi network with my new iPad Mini when I can connect to free WiFi networks at cafes and public areas?

Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Can apple remote desktop be used to assist someone with cognitive disabilities to type on a computer in a different city?

Question: Can Apple Remote Desktop be used to assist someone with cognitive disability to type on an Imac in another city?

You can read about the features of Apple Remote Desktop for yourself and decide whether it would be of help:
http://www.apple.com/remotedesktop/
I can't see how it would help anyone type on a Mac, remote or not, disability or not, but perhaps you have assistance in mind that I'm not envisioning.
Regards.

I am trying connect to a SQL instance for our CRM program and I am receiving To Connect to this Server you must use SQL Management Studio or SQL Server Management

I am trying connect to a SQL instance for our CRM program and I am receiving To Connect to this Server you must use SQL Management Studio or SQL Server Management
This is a Brand new Server 2012 that is running our CRM product and it is trying to connect to a Server 2008 R2 server with SQL Server 2008 R2 SP2 instance (10.50.4000)
I have seen this in the past where it needed the 2005 backwards compatibility components installed but those are not supported on 2012 server and this is not a 2005 SQL instance.
I am trying to install the Shared Management Objects for SQL Server 2008 but it tells me I need to install the CLR types, which I did install. But it continues to tell me to install the CLR types.
Has anyone ran into any issues like this? (this happens trying to connect to multiple SQL Servers from this new 2012 Server)
Thanks!
-Max

Hello,
Which version and edition of the SQL Server instance did you installed on the new server machine? If you install SQL Server 2012 Express edition, you can try to install SQL Server Management Studio 2012 from
this link.
You can connect to SQL Server 2008 R2 or earily verions with SSMS 2012.
What's more, Microsoft SQL Server 2008 Management Objects Collection requires Microsoft Core XML Services (MSXML) 6.0, Microsoft SQL Server Native Client, and Microsoft SQL Server System CLR Types. You can try to download and install
SQL Serve 2008 Feature Pack
which contains packages above.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Integrating EP 6.0 with Solution Manager 3.2 .

Can anyone please help me regarding the steps for integrating EP 6.0 with solution Manager 3.2.
It would be nice if any one would direct me to any link or any presentation where in the steps for the above subject are illustrated.
Regards,
Ashish .A. Poojary

Ashish,
What is your requirement?
Could you be more specific about the area your exploring
Solution manager is huge...
Please assign pts if it helps

SQL Server 2012 Management Studio: Where Can I download AdventureWorks2012_Log.ldf?

Hi all,
From the Microsoft codeplex, I have downloaded the AdventureWorks2012_Data.mdf file and saved it in my C:\Temp folder. I executed the following .sql code:
CREATE DATABASE AdventureWorks
ON (FILENAME = 'C:\Temp\AdventureWorks2012_Data.mdf')
For ATTACH;
GO
I got the following message:
File activation failure. The physical file name "C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\AdventureWorks2012_Log.ldf" may be incorrect.
New log file 'C:\Temp\AdventureWorks2012_Data_log.ldf' was created.
Converting database 'AdventureWorks' from version 705 to the current version 706.
Database 'AdventureWorks' running the upgrade step from version 705 to version 706.
I think that I do not have the AdvendtureWorks2012_Log.ldf file in my C:\ drive that caused the problem in my trial to attach the AdventureWoks2012 to the Databases of SQLEXPRESS of my SQL Server 2012 Management Studio. Where can I download the AdventureWorks2012_Log.ldf
file? Please kindly help, advise and respond.
Thanks in advance,
Scott Chang

Hello,
Please try the following workaround.
http://www.mssqltips.com/sqlservertip/1894/attach-a-sql-server-database-with-a-missing-transaction-log-file/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to Configure Remote Connections To SQL Server 2008 R2 Express

Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!

My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
            // netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo

Unable to Remote connect to a SQL 2008 server

I just set up a virtual server with Godaddy with CF and SQL Server 2008
The SQL server appears to be running because if I RDC into the server and connect using the Server management Studio, it works. To find the instance I have to look at network devices and I find it under MACHINENAME\SQLINSTANCE
The problem I have is that I want to connect to this instance using server management studio on a computer with SQL2005 installed. I guess/hope that a 2005 can connect to a 2008
I'm not 100% sure what the exact correct format is for the "Server Name" when trying to set it up. I've tried everything I can think of
ServerName\IPNumber\Instance
IPNumber\ServerName\Instance
IPNumber\Instance
Nothing seems to work, it kicks back with a big error, aying it can not connect:
A network-related or instance-specific error occured while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify the instance name is correct and that
SQL Server is configured to allow remote connections (provider: SQL Network Interfaces, Error: 26-
Error Locating Server/Istance Spcified) (Microsoft SQL Server)
The firewall on the server is off, I checked the properties of the instance and the option to allow remote connections is also checked
Anybody have any ideas?
Thanks
Mark

Solved this myself.
I was trying to log in with the user name of the adminstrator for the server, which worked locally while on the server but when I tried to use SQL SERVER AUTHENTICATION , tapping in the user name and password, it failed in the same way, even though the password was correct. Connecting using WINDOWS AUTHENTICATION worked, so I checked the users and found that user name did not have a password set because it was the admin I guess, so it just rejected all attempts using SQL SERVER AUTHENTICATION.
What I then did is tried the 'sa' user, and saw that it did have a password set when I viewed it in USERS... so I tried to connect remotely using that, and it worked... problem solved
Thought I'd post that, just incase anybody else came across the problem
After posting this I reversed a change that I had made from info found on another forum, and it stopped working! I put the change back again and it works, so it looks like a combo, here is the info that I found that helped fix the problem
"In the SQL server configuration manager, there is an item called SQL server network configuration, under protocols, I selected the properties of the TCP/IP protocol. There is a tab “IP Addresses” there, and at the bottom of the list is an entry called IPAll. In my case the TCP port was empty. I entered the SQL standard port 1433 in there and I was able to connect."
I had also since posting upgraded to 2008 locally, not that I believe it had anything to do with the problem
Mark

Informatica work flow not connecting to integration service

Hi I am OBIEE admin, i am having the following error when i am trying to run workflow manually.
Informatica work flow not connectied to integration service,
Pls help me asap

Do this:
Open Workflow manager or If it is already opened...then disconnect all the folders...
1. Click on the folder you want to connect
2. Go to 'Service' tab and select "Assign Integration Service"
3. This will open "Assign Integration Service" window from where you can choose the Integration Service and can assign the workflows or all workflows. Click "Assign" button to assign the selected Integration Service.
Now connect to the folder and you can run the workflows.
Hope this helps and please mark if it does. :)

Can't remote connect to Integration Services 2008 r2 with 2012 Management Studio

Similar Messages

Maybe you are looking for