Can't remove Gimp drivers to install new Epson driver

I just bought a new Photo printer (Epson Stylus Photo R1800.)
I go to add the printer in the Printer Setup Utility
click Add (The printer appears in the Printer Browser)
I select it; Then it wants me to select the driver from the list in the "Print Using" drop down.
The driver doesn't appear on the list.
I get a ESPON list but only the Gimp list.
ESPON tech support said these 'old' drivers may be conflicting with the new one.
SO, I try to delete old drivers. I delete ESPON folder from Library>Printers. RESTART.
EPSON - Gimp still there.
SO, I also delete Gimp.pkg from Library>Receipts. RESTART
EPSON - Gimp still there.
How do I get rid of these Gimp Epson drivers so I have a chance of loading the new drivers?
I have loaded the driver from the Epson CD 5 times and it doesn't show up anywhere.
Any hints?

Shows you how much the Epson Tech Support people know...........
There is no conflict. You ADD using a different method - After clicking ADD, don't immediately accept the printer when it appears in the browser - instead, click More Printers, then select Epson USB or Epson Firewire, then select Format for: All. Now you are using the Epson driver instead of the Gimp-Print one. Deleting the Gimp-Print drivers won't change this procedure.

Similar Messages

  • Do I need to remove old drivers before installing new ones (Windows XP)

    I have an  Acer Aspire 3690 laptop with Windows XP home edition installed. I've reinstalled the OS by using recovery tool, updated it again. I want to finish setting my laptop up by updating some drivers, mainly chipset and GPU. I've already found that newer ones are availabe. But do I need remove the old drivers first to avoid any problems in the future? Or do I just run the setup executable of every driver?

    Run the setup and check if the new one are installed; if not remove the old drivers and install the new.

  • Just installed new hard drive in mac book pro 15", when trying to boot OSX from original disk I still get a folder with a question mark in it. How can I reinstall the OS?

    Can't seem to get my mac book to boot from the CD after installing new hard drive.
    I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.

    If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
    So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
    Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
    http://store.apple.com/us/product/MC573Z/A
    https://discussions.apple.com/message/16276201#16276201

  • Can I get my bookmarks back after installing new hard drive?

    Can I get my bookmarks back after installing new hard drive?

    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    Your old Profile is located here in Vista & Win7: <br />
    ''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

  • Current 1TB computer dying.  Installing new 3TB drive next Thursday.  Can I just go directly to my account and install Creative Cloud with Proshow Producer and Bridge with a hastle?

    Current 1TB computer dying.  Installing new 3TB drive next Thursday.  Can I just go directly to my account and install Creative Cloud with Proshow Producer and Bridge with a hastle?

    When I look at the forum index Welcome | Adobe Community I do not find a program called proshow
    Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
    or
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq

  • Help! Help! Help! Can not reinstal vista after replacing a new hard drive

    Can not reinstal vista after replacing a new hard drive (1TB WD 10EZEX) in HP Pavilion a6658f Desktop PC with recovery disc.
    I saw in the screen:
    "Windows setup could not configure windows to run on this computer's hardware"
    Product:
    HP Pavilion a6658f Desktop PC
    OS: pre-installed window vista with sp1 
    Product number:   FK575AA
    Bought in Canada
    Thank you.

    Thank you so much Lisa27,
    win vista installed to new WD 1tb hard drive. How?
    1. use  http://support.wd.com/product/download.asp?groupid=606&lang=en
    >Data Lifeguard for Windows  , write zero and to test the new hard drive,
    2. use Acronics true image 2013 to do partition on the new HD, and then to clone from the old HD to new HD.
    3. down load Intel Rapid Storage Tech to fix the Issues with Windows Vista* and Intel® RAID  (without it, Window mail can not be opened.
    Thank you very much for all your guys again and the support form WD support team.

  • I can't print from iPhoto on my new Epson XP820 printer.  Any suggestions?

    I can't print from iPhoto on my new Epson XP820 printer.  I can print from other applications, like Word or Mail.  Any suggestions?

    Did you check software update or App Store to see if the printer is among
    those Epson models who may have an update download available now?
    Of course, some of these printers, even though wi-fi, may require the wire
    to set them up for first-use, to be identified. Both my Epsons appear twice,
    for wi-fi and again with USB. So I named each appearance, different. So it
    is possible to tell in more than one way, which setup that was selected. A few
    features do not correctly work in instances where drivers differ.
    The latest Epson update helped my newer computer connect to oldest Epson.
    Even though a 1.3GB huge Epson drivers file did not help, & OS X didn't see it.
    Hopefully the they included an adequate quick-setup guide, though that may
    have been for Mavericks, etc. Yet your iPhoto issue may be something else.
    Good luck & happy computing!

  • Installed new hard drive in a Toshiba satellite and now cant do windows upadates

    installed new hard drive in a Toshiba satellite S500-02J . Used recovery stick purchased from Toshiba. Windows installed and everything up and running, but when I go to do a windows update. I received this message: "Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer."
    Toshiba help line said it was a problem because new hard drive was not exactly the same as the old hard drive. It was a minor fix but wanted a $100 to perform the fix remotely.
    Any ideas on how to fix this problem?
    Thanks.

    satellite S500-02J
    Maybe this one from the land down under?
    Satellite A500/02J (PSAR9A-02J001)
    The probloem occurs because the new drive has advanced-format technology. All the new ones do. See this message from three years ago.
    The fix is to install a new storage driver.
       Intel Rapid Storage Technology
    If you've messed around with drivers, you'll probably need to repeat the restore. Introduce the storage driver as early as possible.
    -Jerry

  • I have an older IMAC mid 2007 intel core.  I want to transfer my backup files from an older Maxtor drive to a new one.  My old drive is not support by Yosemite.  Can I transfer the files to a new supported drive?

    I have an older IMAC mid 2007 intel core.  I want to transfer my backup files from an older Maxtor One Touch drive to a new one.  My old drive is not support by Yosemite.  Can I transfer the files to a new supported drive?  I haven't bought a new one yet.  Any suggestions as to which new one to purchase?

    See if you can get the drive to mount. See mount section of 1st link.
    Disk Unmount Using Terminal
    Disk Utility – Force Mount Disk

  • Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

    Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

    Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • Bookmarks in version older than 8 - installed new hard drive - where is the bookmarks file?

    installed new hard drive two months ago - just now reinstalling Firefox -- installed new version 8 -- need to know where my old bookmarks would be stored (what file and where)

    Profile is a folder which store all your personal data in a safe place
    * https://support.mozilla.com/en-US/kb/Profiles
    * here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
    * here explain how to restore it
    https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

  • Hard drive on my mac died, installed new hard drive.  When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

    hard drive on my mac died, installed new hard drive.  When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

    Yes because that information is not located on the hard-drive of your new mac! If it is purchased content from the store, than this issue isn't as bad as it looks!
    Here is a link explaining how to get your previously purchased content back:
    http://support.apple.com/kb/HT2519
    You also want to authorize your Apple ID account on the computer by following these instructions as well:
    http://support.apple.com/kb/PH1730
    Basically this link explains to go to the top left corner of your screen where you will see file, edit, view etc! Click on Store in that section and click on authorize this computer, also you want to make sure that the computer will not automatically sync by going to iTunes in the top left corner, just to the right of the apple symbol if iTunes is selected, and go to prefrences, and here you will see back up! Right under the back-ups has an option explaining to prevent devices from automatically syncing which is good cause you may be able to transfer your purchases from there which will put your content into the computer, and if that happens than we don't lose anything
    Hopefully I was of some help:)

  • I install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen

    i have install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen.
    need help

    First boot into recovery and select Disk Utility>First Aid and repair the disk.
    If there is no improvement, perform a Safe Boot:
    http://support.apple.com/kb/ht1
    If there is an improvement, then third party applications are probably the cause of the problem.
    Ciao.

  • Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

    Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

    Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

  • HT4718 Installed new hard drive, click on restore from time machine, get to 'select a destination' but just keeps searching for disks.. any help please?

    Installed new hard drive and want to restore from time machine.
    Get as far as 'select a destination'  then it goes no further - just keeps 'searching for disks'
    Help anyone please?

    1. Be sure your drive is attached and mounted.
    2. If you have already written any data to the drive, back it up before proceeding to the next step.
    3. In the Finder, choose Go > Utilities. The /Applications/Utilities folder will open.
    4. Launch Disk Utility.
    5. Click the icon for your external hard drive in the sidebar on the left.
    6. Click the Erase tab along the top of the window.
    7. From the Volume Format menu, choose Mac OS Extended (Journaled).
    8. Enter a name for the external hard drive in the Name field.
    9. Click the Erase button.
    Make Sure that you choose the correct drive

Maybe you are looking for

  • No more sound to USB midi device Alesis iMultimix8USB

    Hello After playing hours and days without any problems it's no longer possible to communicate with my Alesis midi device iMultimix8USB. I did all the latest updates. I did on my macbook pro too and it the device is working there fine. So the device

  • Change report margins according to even or odd page number

    Greetings specialist! I have a question regarding how can i change the left and right margins of a document depending wether it's an odd or even page. I would like to know if its possible to setup a different header and footer for odd and even pages

  • Applet not working

    I have the following program to draw some curves on an applet. the applet window loads but at the same time i get the following error message: please help me out. java.lang.NumberFormatException: null      at java.lang.Integer.parseInt(Integer.java:4

  • Problem removing partition using CCC please help

    Yesterday I tried using CCC to clone my hard drive to a 2TB Lacie external hard drive I purchased at local Apple store. All I did was follow CCC instructions but after 3 attempts and communicating with CCC help I've given up. But I have a problem in

  • Determine MWST using fiscal class of ship-to-party

    Hi, Can you tell me how to make the system determinate MWST condition by the fiscal classification of the ship-to-party? I create an acess sequence with filed KOMK-TAXK1, but this is the fiscal classification of the sold-to-party except if the ship-t