Can't replicate vendors from ECC

Hi,
We are setting up a new EBP environment where I can't replicate vendors from ECC to SRM via BBPGETVD. In the application log I get the error message no BBP_VENR005. It says that there is an error in the PD-org structure; only one organizational unit permitted per beckend - purchase org.
I have of course specified the backend system as well as the purchase organization.
We have created a root and one node in the org structure of the vendors.
Can anybody help with this issue?
Best Regards
Ulf Gewers

Hi
Did you influence any error message there BBP_VENR ?
or Are now the vendor is available in PPOSV_BBP ?
red or yellow in slg1.Did you select internal no range or r/3 number range.
Are you transfering from multiple backend sytem with srm.
Hope that your organisation is consistent with green.
regards
Muthu
Edited by: Muthuraman Govindasamy on Sep 29, 2008 11:59 AM

Similar Messages

Mandatory fields to replicate vendor from ECC to SRM

Hi all,
I created a vendor in ECC with all mandatory fields. But when I tried to replicate the vendors to SRM from ECC, I am getting errors like mandatory fields are missing. Can you please tell me what are the mandatory fields in SRM when we replicate vendors from ECC to SRM. Its Urgent.
Regards,
Balaji.S

Hi Balaji,
When you create Vendors properly in ECC it should not give such an error. You have to maintain basic data, Accounting data and purchasing data. Rest all are optional.
For replicating vendors from R/3 to SRM you should have a Vendor root org / group in SRM. BBPGETVD is used to replicate vendors to SRM by mentioning the logical system and Vendor Group ID.
Hope this makes you clear. Please explain the error clearly for further help.
Award points for helpful answers.
Rgds,
Teja

How can we replicate UOM from ECC to SRM.

Hi ,
In ECC I have assign ISO code against the UOM.
I have replicate ISO code from ECC to SRM. But unable replicate UOM.
How can we replicate UOM from ECC to SRM?
Thanks with regards
Sachin

Hi Sachin,
UOM are uploaded in SRM through object DNL_CUST_BASIS3. It's part of master data replication.
You should refer following link, it will give you idea how to load mentioned object in SRM:
MASTER DATA REPLICATION: SETTINGS
I hope it helps.
Regards,

Vendor Sync Job not updating all vendors from ECC to SRM

The vendors are updated from ECC to SRM by batch job
Z_SUP_BAT_VENDORSYNC (object BBP_VENDOR_SYNC).
This job is missing updation of some vendors from ECC to SRM.
Its happening on and of.We are updating these leftout vendors manually by TCODE BBPUPDVD and new left out vendors by BBPGETVD.
We have concluded that information in these vendors is replicated from
ECC to SRM GUI but it is not reflecting in SRM portal.
Reasons looks like when vendor data(Incoterms/Payment terms) is replicated from ECC to SRM an
addition row is created in vendor data in SRM which does have this information(Tcode ;BBPMAININT).
Though the information is present in second row in vendor data tab of vendor information when executed using TCODE BBPMAININT but Vendor information in portal is picked from 1st row and does not appear when try to shop.
Can anyone suggest how to resolve this?

Hi Harleen,
The problem is because of the inconsistency in the tables BBPM_BUT_FRG0060 and BBPM_BUT_FRG0061.
From table BUT000 take the partner guid for the problematic vendor.
Enter the partner guid as input to the table BBPM_BUT_FRG0060 . check the number of available rows.
Now check the table BBPM_BUT_FRG0061 with the partner guid. check the number of rows.
You must see the inconsistent number of records in these 2 tables for the partner, like 1 row in BBPM_BUT_FRG0060 and 2 rows in BBPM_BUT_FRG0061.
Delete the invalid row in the table BBPM_BUT_FRG0061. That should resolve the problem you are facing.
Regards,
Sapna

Can you replicate databases from SQL Server 2014 Enterprise Edition to SQL Server 2014 Standard edition?

Hello,
Can you replicate databases from SQL Server 2014 Enterprise Edition to SQL Server 2014 Standard edition?
Thanks.

Yes, you can replicate from Enterprise edition to Standard edition. The only caveat is Peer-to-Peer Replication requires all nodes to be Enterprise Edition.
Brandon Williams (blog |
linkedin)

Unable to replicate one vendor from ECC to SRM

Hi Gurus,
We are using SRM 5.0 Classic scenario.
We have scheduled the job to replicate the vendor masters from R/3 to EBP on daily basis and it is working fine and replicating the vendor master from R/3 to EBP without any issues for past two years. But one vendor created on few days back for the Co.Code 1089, 1089 and purchasing org 3000, this vendor is not replicated to EBP, all other vendor for the same combination are replicated.
For this reason I manually execute the t-code BBPGETVD and I am receiving the error message as "Error in Organizational Structure; Only One Organ. Unit is Allowed per Backend P.Org Purchasing Organization: 3007 Backend: MP1CLNT100" in SLG1.
Technical Data
Message type__________ E (Error)
Message class_________ BBP_VENR (Vendor Replication, Application Log)
Message number________ 005
Message variable 1____ Error in Organizational Structure;
Message variable 2____ Only One Organ. Unit is Allowed per Backend POrg
Message variable 3____ Purchasing Organisation: 3007
Message variable 4____ Backend: MP1CLNT100
Could you please suggest me how to fix this issue.
Your help will be greatly appreciated.
Thanks & Regards,
Sada

assume vendor code :- 10001 ,COMP CODE :- 1089 , P.ORG 1089 and 3000
but why error message gives
purch org. 3007
for example :-
did you extend the vendor from 1089 to 3000
or
created a new vendor for both purch org 1089 and 3000
or
There are some sap notes are available why vendors are not transfered to ecc
two reason
1.extend to pur.org
2.while running sync job - vendor admin team creates a vendor master that time time stamps are ignored- sap offered a note as well

RFC enabled FM to fetch partner details of vendor from ECC system

Hi All,
I am working on an enhancement in SRM system.the requirement is as follows.
1.In the current SRM application, the invoicing party partner function does not exist.Because of this, the invoicing party cannot be populated on any external purchasing documents such as RFQ, PO, RO, contracts.
2.This functionality exists in ECC. In ECC, the user can enter an invoicing party on a vendor master record.The invoicing party functionality will be deployed to SRM so that external purchasing documents are populated with the correct invoicing party.There is a standard vendor replication program for this...
To accomplish the above said functionality, I have planned to do like this in SRM system....
1.There is a BADI "BBP_DOC_CHANGE_BADI" with a method "BBP_PO_CHANGE ". This will get triggered when a PO is getting created or changed.
2.In that there is a table called IT_PARTNERS which will have all the partner details in it.
3.I will take the partner (vendor number i.e.,partner function is 0000019) and pass that value to an RFC enabled function module which will fetch the invoicing party from ECC system.
4.Later that Invoicing party number is appended to the IT_PARTNERS so that it will be populated on any external purchasing documents.
Here I want to know whether any standard RFC enabled function module which fetches the invoice party details from ECC system.
Awaiting your answers...
Thanks,
Ravee..

Hi. Just use function RFC_READ_TABLE and table WYT3.
Regards,
Dave.

Import vendors from Ecc 6.0 to SRM 7.0

Hi experts
i'd like to know if there is a guide or a blog where it is illustred the way to import, for the first time, vendors from R3 to SRM-EBP
Is needed only BBPGETVD? and for the update?
regards.
andrea

Hi,
The initial load from ECC system to SRM system is done by the transaction BBPGETVD. Here after the changes for vendor data is replicated to SRM system by the transaction BBPUPDVD.
T-code BBPGETVD,
a)      Specify the RFC destination of the R/3 backend in the System field
b)      Specify the vendor number or range to be downloaded
c)      Enter the purchasing organization
d)      Enter the object ID - this is the object ID for the Vendor unit in the organizational structure as defined in PPOMA_BBP
e)      Select "Transfer Only R/3 Numbers"
f)      Click on Start Transfer
Transaction BBPUPDVD
In this transaction you will update vendor master data into SRM to replicate the changes, if any, from back-end ECC system.
a)      Specify the RFC destination of the R/3 backend in the System field
b)      Specify the vendor number or range to be updated for any changes done in the backend vendor master
c)      Enter the purchasing organization
d)      Enter the object ID - this is the object ID for the Vendor unit in the organizational structure as defined in PPOMA_BBP
e)      Select "Transfer Only R/3 Numbers"
f)      Click on Start Transfer
Regards,
Sheetal.

Not able to replicate Vendor from R/3

Hi
We have recently upgraded the EBP from 4.0 to 5.0. I am using REPVEN to do this which was working fine in SRM 4.0. But when I run this transaction I get error
"Error carrying out job. Execute program directly Message no. BBP_BPRM047"
The programme used by this transaction is EBP_VENDOR_GET_DATA_JOB.
I have also tried to do this thru BBPGETVD. Here i get the error that Object ID does not exists. I am using the same object ID which was used in the above transaction.
I want to know whether Object Id gets changed after the upgradation. Also i want to see this object ID. Where to check this object ID of vendor. I dont have authorisation ppomv_bbp.
Thanks in advance..........

Hi
Ideally you should be having SAP_ALL access, before you replicate the Vendors from R/3 to SRM using BBPGETVD Transaction.
Ask you BASIS team to provide atleast all the require authorizations to your SAP UserID in this case.
Here are the detailed steps in the links below ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
Re: How to enable the Initial load of Vendor and Material replication
Re: Vendor replication Error. SAP R/3 to EBP system
Re: External number assignment - vendor replication
Re: Vendor replication: Delta modification : Report BBP_VENDOR_SYNC : SLG1
Re: Vendor replication
Re: Vendor replication
Regards
- Atul

Replicate customer and vendor from ECC to CRM

Hi experts,
Is it possible to replicate customers and vendors extending the same BP in CRM?
If i had one customer in ecc that is a vendor too, can I configure or implement some badi in middleware to replicate changes to the same BP in crm?
Best regards,
Caíque Escaler
Edited by: Caíque Escaler on Jan 12, 2011 4:57 PM

If I recall from my ECC days, this field is used for back to back orders i.e. Sales Order creating a back-to-back Purchase Order. As such, there is no relevance for this data within CRM, so I would not expect it to be maintained there. It only has relevance within ECC (Sales & Purchasing).
Mark

How can I replicate table from a user to another user?

I want replicate a table from a user to another user, I use DBMS_STREAMS_ADM.RENAME_SCHEMA, but it didn't work.
who can tell this reason?
scripts as following:
create user strmadmin IDENTIFIED BY strmadmin;
grant dba to strmadmin;
BEGIN
DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE(
grantee => 'STRMADMIN',
grant_privileges => TRUE);
END;
connect strmadmin/strmadmin
--queue
BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'STREAMS_QUEUE_TABLE',
queue_name => 'STREAMS_QUEUE');
END;
--capture
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'CAPTURE',
streams_name => 'S_CAPTURE',
queue_name => 'STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
include_tagged_lcr => false,
source_database => 'ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM',
inclusion_rule => true);
END;
--instantiation
DECLARE
iscn NUMBER;
BEGIN
iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
source_schema_name=>'SCOTT',
source_database_name => 'ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM',
instantiation_scn=>iscn);
DBMS_APPLY_ADM.SET_TABLE_INSTANTIATION_SCN(
source_object_name=>'SCOTT.DEPT',
source_database_name => 'ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM',
instantiation_scn=>iscn);
END;
--apply
--transformation
DECLARE
s_dml VARCHAR2(30);
s_ddl VARCHAR2(30);
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
          schema_name => 'SCOTT',
streams_type => 'APPLY',
streams_name => 'S_APPLY',
queue_name => 'STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM',
dml_rule_name => s_dml,
ddl_rule_name => s_ddl);
DBMS_STREAMS_ADM.RENAME_SCHEMA(
          rule_name => s_dml,
          from_schema_name => 'SCOTT',
          to_schema_name => 'TEST',
          step_number => 0,
          operation => 'ADD');
END;
--start
BEGIN
DBMS_APPLY_ADM.SET_PARAMETER(
apply_name => 'S_APPLY',
parameter => 'DISABLE_ON_ERROR',
value => 'N');
END;
BEGIN
DBMS_APPLY_ADM.START_APPLY(
apply_name => 'S_APPLY');
END;
BEGIN
DBMS_CAPTURE_ADM.START_CAPTURE(
capture_name => 'S_CAPTURE');
END;
/

select * from dba_streams_rename_schemaWhat do you have there?

Vendor Master Replication Error from ECC to SUS : Error in ALE Service

Dear Experts,
We are implementing MM SUS (SRM 5.0). As a part of this we need to replicate vendors from ECC to SUS system via XI. We have created a Reduced Message Type Z_CREMAS_SUSMM and had set up the partner profile in WE20 with SUS logical system as destination and specifing the Message Type, and port of the XI system
We executed the transaction BD14 for replication, it is resulting in error 29 : Error in ALE Service : Entry in Outbound table not found.
Please provide inputs to overcome this problem
Thank you,
Regards,
Ravi

Hi,
Check
Re: Idoc Error Status "Entry in outbound table not found "
Looks like some issue with the partner profile set up for the sender or receiver of the EDI message in WE20.
Set up them again and When these have been set up try reprocessing your IDocs from BD87

Replicating vendors from SRM to ECC

Hi All,
We are implementing SRM 7.0 EHP1 and we have a SRM-SUS scenario.
We have a requirement where we want to replicate the vendors from SRM to ECC.
I know that there are standard programs and interfaces for replicating vendors from ECC to SRM, but are there any standard programs XI/PI interfaces that are available for replicating vendores from SRM to ECC?
Please share your thoughts....
Thanks in advance!

Hi Jack,
Unfortunately I don't have a config guide for it. Can you speak to your XI/PI consultant and just ask him to configure this scenario in XI/PI.
PS: Before this you should import all SRM related business content in your PI system.
Regards,
Nikhil

Report on New vendor transfer from ECC to GTS

Hi we have run the batch job daily basis to transfer new vendors from ECC to GTS system, my client want to know that list of the venodors(Business Partners) has been transfered today in GTS system on particular day to screening SPL. where i can see this, or any possible solution saying that get mail notification to users - once vendors are transfered based on job batch runs.
regards
Satish

Satish,
You can see the log in System Monitoring > Transfer logs for business partners or by executing the transaction: /SAPSLL/PARTNER_APPL.
However in order to see the required logs, you need to configure the u2018Control Profile for Loggingu2019 in IMG.
Hope this helps.

Vendor Replication not Successful in EBP4.0 from ECC R/3 4.7

Hi,
I am trying to replicate vendors from my ECC backend using BBPGETVD.
I have specied the backend system , vendor number and the object ID of the organizational unit for Vendor. I have checked the Only transfer R/3 numbers option. When I click on the 'Start Transrer' button , I go to the next screen where I find the total number of Vendors as 1 and Adoption of R/3 description as 1. After this when I click the 'Start Transmission' button , I get the message Replication program started but the log does not show any entries for the same and the vendor is not getting replicated.
If anyone has come across the same , then let me . Helpful answers/solutions will be rewarded points accordingly.
Regards,
Kalyan

Hi,
Could you see anything in PPOSV_BBP txn under your Vendor Group ( Vendor Root Org) ?
Also check the tables VENMAP ,VEN000 tables whether the vendor has been replicated.
Also is the vendor already replicated in SRM ?
See these notes:
392446- old naote- All r/3 numbers are already assigned.
973404- Address data not transfered correctly.
BR,
Disha.

Can't replicate vendors from ECC

Similar Messages

Maybe you are looking for