Can't resize video in Sequence monitor window anymore ???

OK Help... I have been working on a project in CS4 and the project settings are HD 1080. I have been able to bring in other SD clips and simply "click" on the video in the monitor window and a box comes up around the video and I can resize it and then render and it looks acceptable. This works if I want to shrink it and have a black border also. Now the ability to do this is GONE ! Same computer - same everything. I click and there is no box or ability to re-size. Only thing I ever did was load up another project at one time in standard DV - NTSC and encoded with Encore. Whats Wrong

Glad that you found it. You can also do the same thing with the Bounding Box, if you open the Effects Control Panel, and then click on the name Motion in the Effects list there, and you'll get a Bounding Box in the Program Panel. Personally, I like the numerical method, but some like the Bounding Box.
Good luck,
Hunt

Similar Messages

I can't resize pictures with my selection tool anymore how can i reset it?

i can't resize pictures with the selection tool anymore, i can only move them please help.

Most likely, you inadvertently triggered Hide Bounding Box. To rectify, choose View > Show Bounding Box.
(Cmd/Ctrl+Shift+B toggles this.)

Can't see video on NTSC Monitor During Playback

Since loading FCPS2, I can't get video output to my NTSC Monitor

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Can't see video in NTSC monitor via DRS-11

Hi,
With the old Soundtrack Pro, i never had problem watching my video on my monitor.
Now, with the new Soundtrack Pro, despite i select NTSC Fire Wire, i can'r see anything in the monitor.
What am i doing wrong ?
thanks

please help me with this one...
Never had this problem with previous STP versions...
thanks

Can't see video in Source Monitor, or play it in Program Monitor

Hi there
I have been using Adobe Premiere Pro CS5 fine for months now, doing the same tasks on a daily basis. However yesterday morning the computer crashed whilst editing some footage and now it doesn't function properly.
I have re-installed the software and this hasn't fixed issues, and also performed a system restore which fixed some but not all of them.
The main problem is I can now import video into the project and drop it onto the timeline (which I couldn't before the system restore) but now I can't view the original footage in the Source Monitor, making editing tricky, and it doesn't play continuosly in the Source Monitor, only giving a still image wherever I leave the playhead.
I can hear the audio and it plays without any breaks, it's just the video.
Can anyone help?

Can anyone help? I use it for work and basically I can't do any more work until it's fixed.
Things I've tried:
Uninstall and reinstall
System restore
Checking opacity on clip
Checking which workspaces are open
importing old footage and other formats
opening old projects
updating codecs
emptying media cache

Can't drag video from source monitor to timeline

I have been working a few years with Premiere Pro (now CC) and this never happened to me before.
I can't drag video from the source monitor to the timeline. What is happening? The sound can be dragged but there is a hand with a 'no sign' for the video??? How can I solve this problem without starting over again?

Please dont double post!!!!

Can't convert videos to MP3 in Windows iTunes

In the Mac version of iTunes, I can convert a video podcast into an audio-only MP3 file. I do this by highlighting the podcast episode, then going to File and clicking on "Create New Version" then holding down the "option" key to activate the "Convert to MP3."
But when I try this in the Windows version of iTunes, I cannot get "Convert to MP3" to activate. Instead, it remains grayed out and nonfunctional. My Windows keyboard doesn't have an "option" key and neither the "ctrl" key nor the Windows key nor the "alt" key will activate the command.
So how do I get "Convert to MP3" command to activate.

http://i35.tinypic.com/otdhyx.png
This is SUPER, what I use to convert videos. All the settings I have selected are what I used to get the video to work. The problem I had before is that someone told me that the iPod uses MPEG-4 video, and I assumed that .mp4 was the file extension(Output Container sets what the file extension will be) for MPEG-4. Turns out, it's not. The OUTPUT VIDEO CODEC needed to be MPEG-4, but what I had it set to was H.264/AVC. So the Output Container was right, just not the Output Video Codec.
So basically, the fix is to just use the right settings Which, if you use SUPER, is everything I have shown(Adjust the bitrates to your liking. More is higher quality, less battery life. I just watched "Wanted" last night with those current settings, and it looked and sounded alright, but I'll probably put the audio up to the next level for any future movies).

Can't see video in the Canvas window

Something's just gotten turned off and I can no longer see an image in the Canvas window.
I can hear the audio as the sequence plays, but there's no video.
What's happened?

Just figured it out: "Wireframe" had gotten selected instead of "Image + Wireframe" (in the Canvas drop-down menu).

Safari Can't Play Video in External Monitor

There have been a couple of threads on here about this but few answers that work.
For some reason, Safari 5 will not play web videos on an external monitor regardless of whether it's on YouTube or any other site. It will play videos on my primary Macbook monitor but only shows a black screen on my external. Firefox and Chrome certainly do. I prefer to use Safari and would like to know if anyone has a fix for this other than telling us to use the other browsers.
As indicated in the signature to this post, I have the original black Macbook and am using Snow Leopard.

This is ridiculous. Video windows simply don't show up on many sites for me, i.e., MacMost. No problems in Firefox. I tried all the aforementioned solutions, trashed prefs, disabled extensions, repaired permissions, etc. No good. Safari is supposed to be THE superior browser. I hate the idea of going to Firefox, but I may have to. Safari isn't worth the grief. Any other solutions are wekcome.

Can Print to Video HDV sequence

Hello, I am trying to export an HDV sequence to a miniDV tape for broadcast. I am using a Sony GV-HD700 tape deck. I am using Print to Video and it just wont work. Any help would be appreciated, thanks!

I am having this same problem, and need help urgently. Does anyone know how to resolve this? I can control the deck through FCP and the FireWire cable, and can even initiate automatic recording from FCP, but once it starts playing the content the deck freezes and does not actually record anything.

I can't see video on my monitor while I edit

Hello folks,
The other day, I was trying to add some
motion effects using Motion with transfered
clip from Final Cut Pro but all of sudden
video play on my monitor won't show anything
and even after I went back to final cut pro,
it won't show anything while I edited.
I thought it was just that particular clips or project
but it affects the whole FCP program and I can't see
anything both on the monitor nor canvas!
I now stopped working on my project because of it.
Does anyone know why this is happening and
please provide me some answers to solve this problem!
Thank you so much in advance folks!

Another issue might be that you have two or more output devices, like a blackmagic card for example make sure under view... (sorry I don't have FCP here, I don't remember the name of the submenu but I think it's 2 subs under external...) that you have the right device selected.

I can't add videos to itunes in windows xp & windows 7

I'm using windows 7, I cant add the vdeos to the library of tje itunes.There isn't any problems wtih video formats, 'cos this videos i had in my iphone 4s before I used windows xp. First time when I used windows XP i can add videos, but then i can't add

There are settings that you can set when the ipod is connected to itunes that you can set on how the tv shows and movies load onto the ipod.
1. Open itunes and connect the ipod to the computer.
2. Find one of the tv shows that are not moving over to the ipod and double click on it to play it. If the computer is not authorized to play the content, a window will open for you to put in your account name and password to authorize the computer.
if your ipod is set to automatically sync with itunes, follow these steps
3. once the video or movie plays on the computer. Click on the ipod on the left hand side of itunes so that you see a summary page on the right side of itunes.
4. at the top of the summary page, you will see a row of tabbs, click ont he tv shows tab.
5. then select how you want the tv shows to load onto the ipod.
If your ipod is set to manually manage
3. drag and drop the tv shows or movies onto the ipod on the left side bar of itunes.
Here is a link to an article on the apple support website that will help you out.
http://docs.info.apple.com/article.html?artnum=304680

SpeedGrade CC 2014 Can't see videos on the color window, only black

I'm just starting with the software and since I started I can't see the footage, I imported a sequence and there is nothing on the screen, I'm not sure if it's a problem on preferences that I have it wrong or what..
Please, Help.

That could be the problem, I'm not using a graphic card and the resolution is 1920x1080 by 23.976 fps in fact when I play the video the little symbol of pc turns red
How do I change the settings so I can work? and when I use a different frame rate I need to change it on the preferences or it automatically set it?

Problem - No Video Preview in Monitor Window

Hi,
I recently got the CS4 bundle, and I installed the update for Encore (4.0.1).
I wanted to insert some chapter markers in a timeline, but I need the video to display in the monitor view of the workspace. I can hear the audio, but I can't get any video to display in the monitor view. It usually just displays the grey color used as the background color of the workspace. The monitor view acts like it's freezing up. The flowchart doesn't perform this way. The monitor worked fine in Premiere Pro, so why is it having problems here? Has anyone else had this problem? If so, how did you remedy it?
I don't think it's a hardware issue. I realize I could go back into Premiere Pro and insert the chapter markers, but at some point, I need that monitor feature! Again, any insight would be appreciated. Thanks in advance for your time!
Mick

Mike,
Sorry that I cannot comment directly on CS4, as I do not have it yet. Going back to pre-CS3 versions, one just Exported from PP to files (I happen to use DV-AVI (video only) and AC3 (Audio only for DD 5.1 SS). I use PP2's Export>Movie for the DV-AVI and Export>AME for the AC3.
With CS3, one could Export>Encore. This seemed to be a fairly direct Export, but did cause problems for some. With CS4, Adobe has added a version of DL (Dynamic Link), similar to what has existed between PP and AE. Now, one could use DL between Encore2 and AE, but it was not quite full implementation (IMHO), and was more suited for animated Menus, more than full AV files. Here, I do not know exactly how the DL function works between PP and Encore. Others will have to step in here.
You *should* still be able to do your Export>AME from PP, and then manually Import these files into Encore to do your Project. I'd still use elemental streams (one Video file and one Audio file) for these, though many Export muxed single files.
For the use of the newly implemented DL (it just might not preview - I don't know), maybe Jbowden, Stanley, Jeff or Ruud can give you the definitive statement and also instructions for doing it the best way. In the meantime, I'd try the old Export method. I'd also do it so that Encore does the Transcoding on "automatic" so there are no bit-rate problems.
Sorry I do not know CS4 better,
Hunt

Can't watch videos because of permissions window

I am running Win 7 IE11 Flash Player 11.9 w/latest update. The permissions box is in the center of every video I try to watch & I can't get rid of it. Doesn't matter if I click accept or deny, uninstall & reinstall, or even restore my system to a previous point- it goes nowhere. Help me before I pull out the shotgun!!!!

Calm down...
Go to Control Panel>System and Security>Flash Player (32bit)
Under the Storage tab, click "Allow sites to store information on this computer"
Close the Settings Manager.
You won't see the "Accept or Deny" anymore.

Can't resize video in Sequence monitor window anymore ???

Similar Messages

Maybe you are looking for