Can't restore from time machine after SSD upgrade

Macbook Pro 13" mid-2009, 10.7.5 Lion
I just swapped out my 160GB  HDD with a 250GB SSD on my MBP. When I booted up, I pressed Command-R to try to get into recovery mode but all it does was showing a gray folder with a question mark on it.
I had previously backed up my HDD with time machine. My original HDD is no longer available because I tried to upgrade to Mavericks (since the command-R was not working) and upon restarting my MBP was locked with system pin code (that is another nightmare all by itself)
What are my options besides getting a 10.7 Lion CD from the apple store and try to boot it up that way? and then restore from time machine?
Any other way I can get into receovery mode?
Thanks (My MBP is now a brick sitting on my desk)

It's a bare drive so it isn't formatted and it doesn't yet have a Recovery HD installed on it.
Your computer originally came with a version of Leopard installed. You can reinstall it if you still have the original discs that came with the computer. Or, if you have a retail Snow Leopard DVD you can reinstall Snow Leopard from which you can then upgrade to Mavericks (Lion is no longer available for re-download.) It's unlikely your local Apple Store has a Lion USB flash drive or DVD although you can certainly make an appointment and ask for their help.
You should see if you can boot from the Recovery HD invisible image in your Time Machine backup drive. Connect it to the computer and use OPTION boot to get the boot manager. If you see a Recovery HD on your backup drive displayed, then boot from it.

Similar Messages

  • How to restore from time machine after HDD upgrade on macbook pro?

    Hi,
    I have recently bought a WD 2.5 inch SATA 750GB 7200RPM 16GB HDD and plan to use it on my macbook pro 13 inch 2.4ghz early 2011. I will leave the pysical installation part to Apple Service. I have my Time Machine backup on an external hard disk. So, once I get the upgraded macbook, what are the steps I should follow for a complete Time Machine restore? (Including the formatting on the new HDD).
    One more question; when I transfer my applications to the new HDD will Time Machine "remember" their activation codes and license information ?
    Thanks a lot.

    http://web.me.com/pondini/Time_Machine/14.html
    This has all the instructions for a complete restore, including how to format the disk. Pondini's site probably has anything else you want to know too.
    Good luck!

  • Renamed multiple files iTunes Match. Can I restore from time machine?

    Hi
    Hopefully someone might be able to assist.
    I downloaded a live album from a bands official store on their website.
    After importing into my itunes library, I tried to rename the two discs so that they appeared as one album, (I've done this lots of times before).
    Stupidly, I was rushing before I had to leave the house, was unaware that is actually selected 50 albums and accidently renamed  a large number of files as one album!!!
    It's made slightly more complicate because I have iTunes Match and they were all stored in the cloud.
    Can I restore from time machine and manually update iTunes Match?
    Amy help would be appreciated
    Thanks

    when i say right clicking, i mean in itunes, right clicking the song and going get info and then changing the properties via the info tab.
    yehh i done the grouping tracks together by holding down the command key.
    but because i have some smart playlists with the same songs in, i changed both the genre and grouping not realising, this was ok for one smart playlist but totally messed the other up, especially because in for example "dance classics" smart playlist, there also in a folder on my hdd, . and thats the playlist i messed up., but if i drag the folder back into itunes, there all over the show on itunes and in the other playlist too, hence why it isnt as easy to easilly sort and rectify.
    so what id like to do is just copy the folder again from my time machine backup, replacing the files but im unsure if this would solve it.
    Message was edited by: Ian-K

  • Had to install a new hard drive early 2008 iMac, now can't restore from Time Machine.

    Had to install a new hard drive in a early 2008 iMac, now can't restore from Time Machine. Backups show in Time Machine but  I can't select them.
    Serial Number  QP*****1LW
    <Edited by Host>

    Here are some notes on Time Machine problems.  
    http://pondini.org/TM/  
    Troubleshooting.html
    I have asked the hosts that your serial number be removed.  Best not to publish it,

  • Selectively restore from Time Machine after reformatting

    I just reformatted my drive and reinstalled Mountain Lion and then upgraded to Mavericks. I backed up to Time Machine just before the reinstall. Time Machine did combine my first new backup with the ones before the reinstall, which I can see when I browse through the Time Capsule.
    I would like to restore some things from the Time Machine timeline, however when I enter the timeline, the backups prior to the reinstall are named in purple on the dateline and the Finder windows are black and inaccessible. I suspect this is because after the reinstall the computer has a new account name, so the permissions are different on the previous backups with the old account name.
    Does anyone know how to get the older backups to be accessible in the timeline? I would like to just selectively restore a few things as needed, and would like to do the "restore from Time Machine" rather than drag copying files from the mounted backup.

    I would like to just selectively restore a few things as needed, and would like to do the "restore from Time Machine" rather than drag copying files from the mounted backup.
    For this type of activity, you might want to take a look at Migration Assistant on your Mac, located as follows:
    Macintosh HD > Applications > Utilities > Migration Assistant
    More info here:   OS X: How to migrate data from another Mac using Mavericks

  • Lost mail rules when upgrading to ML, can't restore from time machine

    Hi,
    I've installed mountain lion and restored from time machine and mail rules were not there. There's only news from apple.
    I tried to restore the rules myself (MessageRules.plist and MessageRules.plist.backup) but when opening mail rules were not there yet. Nevertheless, i can add rules manually, so if there was a way of looking at the past rules I could just copy them (though it's not the best way).

    My rules are still there, so perhaps Apple support speak with resource forked tongue.
    Comparing an old (pre ML) rules file from 20th June with the ML one, the differences are:
    The file name was: MessageRules.plist, the ML one is SynchedRules.plist. Both are in my V2 folder, but the old Rules have been copied (by Mail, not me) into the new SynchedRules file.
    In the old file, for each item (Rule) the first line was Active (Key) String (Type) 1 (Value). In the ML file, this line is no longer there, so the first line is AllCriteriaMustBeSatisfied.
    You can see these differnces in the "preview" part of Finder Show Info, if you have the two files to compare.
    Thus, just copying and renaming the old Rules file probably won't work, because of this difference. Mail probably just makes a new file because the copied file isn't as expected. It should be possible to edit the old plist file to remove the "Active" line, and rename it to SynchedRules.plist (but see below). The top is slightly different, just below <dict>, as this relates to the Active line. There are a  couple of lines at the bottom that aren't in the new file.
    The "Active" line that has gone is now in a file called RulesActiveState.plist. This file is just a list of RuleIds from the SynchedRules.plist (like this:
    AC6F6611-FF61-4AA6-9682-BA100EFAC233)
    Doing this does sound rather tedious, but might be quicker than manually re-entering blocked email addresses etc. to replicate old rules. As plist files are in xml format, it should be possible to use a text editor to delete the unwanted "Active" line from the message rules list by Find & Replace All (with nothing). All this could then be copied to the "SynchedRules.plist. You would need to copy the RuleIds into the RulesActiveState.plist as well.
    Make a copy of the files first just in case...

  • Restoring from Time Machine AFTER install

    My hard drive crashed, so i had to buy a new one (WD scorpio blue). I replaced it, then reinstalled from the install disk (10.4.10, Tiger). That was mistake one. What I meant to do was to restore from my time machine backups on an external HD. I also have the leapord disk that came with, which i forgot to install from, my second mistake. so my question is -- do i have to erase the hard drive and start back over to install from my TM back up, or can i do it either during the upgrade to Leopard or from Tiger?
    Thanks.

    Matt Clifton wrote:
    Boot from your Leopard disk (with your TM drive connected), and go to Utilities - Restore from Time Machine Backup.
    So, using this procedure will restore my MB onto a totally new hard drive with all my programs back intact along with any files?
    If so, this looks like a great way to replace/upgrade a hard drive. Re "go to Utilities", is this folder or option from the Leopard disk?

  • How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?, How do I Restore from Time Machine after I have reinstalled my system software (Snow Leopard and then Lion) ?

    I have never done this before, so can someone explain in detail how I reintall my system software and then restore from Time Machine please ?

    Your profile indicates that you currently have an older version of Snow Leopard (10.6.2).  In order to install Lion, a prerequisite is the latest version of Snow Leopard (10.6.8).  Perhaps a few more details would be helpfull in solving your problem. ex. If all you want to do is to upgrade to Lion, a restoration of data is unneccessary.  Download the latest version of Snow Leopard and then download (purchase) and install Lion.  User data will remain intact.
    If I am missing something, please elaborate.
    Ciao.

  • Can't restore from Time Machine using recovery partition

    I came up with the idéa to put in an extra disk (SSD) into my mid 2009 13" Macbook Pro running Mountain Lion and create my own fusion drive.
    In order to make sure not to lose all of my data I made sure to back up all my files using Time Machine so that simply could restore my entire system to the new drive.
    Careful as one should be when about to wipe the entire drive on a computer I wanted to check so that I could make a proper restore from my TM backup disk. So I booted into recovery mode and choose to restore from Time Machine and then I selected my external drive, but then nothing. Where the list of my latest backups should be there was nothing.
    I've tried to format the disk several times, changing disk permissions etc.
    Does anyone have a clue what could solve this? Is it possible that it has something to do with the fact that I'm (probably) running 10.8.3 and that my recovery partition is 10.8.2?

    Is the TM backup complete? When you Enter Time Machine, do you have snapshots going back in time?
    See here for info on a problem Pondini has found with Time Machine that may have affected you:
    UPDATED: Serious Time Machine bug on Mountain Lion (Updated)
    You may just have to restart your TM backups to get those folders backed up.
    If you do have that issue, please post at his link. He is trying to get enough background info to pass to Apple to solve the problem.

  • Can't restore from Time Machine backup error message

    My hard drive on my Macbook failed a few days ago. Just makes a clanking noise and won't boot up etc... I installed a new drive, formatted it, and selected restore from Time Machine backup from the installer screen. It started restoring from my backup I had on an external drive and everything was fine untill it got about 6% done then get a message that says "An error occured when restoring from the backup" It is pretty non descriptive. It also says please restart your system and try again or something to that effect. I tried again, same problem.  When I try to copy files over manually I eventually gets some error that says there is a problem with a file and it will quit. Any ideas on how to get my data? I can see all my files on there, but can't get them. My backup disc is just used for backup on this one machine nothing else, so it shouldn't have a problem. Help!

    Good to hear MA is doing something!
    >I have never had much luck with Time Machine...
    Same here, not one good backup or restore, can't tell which.
    You can set any of these to Clone/Update as often as you wish...
    Carbon copy cloner...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Or the most expensive one & my favorite, Tri-Backup...
    http://www.tri-edre.com/english/products/tribackup.html

  • Cant Recover from Time Machine after Yosemite upgrade

    I have a 27" iMac (w SSD Drive) and after the initial Yosemite upgrade i had to uninstall because it hung trying to boot.  After some help from Apple I lost all of the data and apps on my hard drive (thanks???).  The restore utility (restart option r) restored me back to Mountain Lion.   I wasn't concerned as I have a time machine. I tried to restore from Time Machine using command-r and it is said I don't have enough space?  I retried the Yosemite upgrade which seems to be working fine (a couple of reboots and has been ok (cautiously optimistic.  I Entered Time Machine and clicked on the last valid backup in the timeline (the time line shows many) and nothing? It should have scrolled backwards but it didn't (the bar highlighted red when I hovered over).  I tried to use the little arrow to move back and it doesn't do anything? All I can do is cancel?  Am I doing this wrong? Any suggestions?

    Yosemite has to index the backup.. over wireless this takes days.. no kidding.. even over ethernet it takes a very long time.
    Is the TM backup on a Time Capsule or on external drive??
    How long are you waiting?? Please don't expect instant indexing even on fast external drive... and on wireless connection to a TC.. forever could be close to the time period.
    If you had have asked before you started down this route.. I would have strongly recommended you take a bootable clone from the disk before you attempted anything.. Carbon Copy Cloner creates a reliable and easily tested backup since you simply boot from it.
    Time Machine is now so hard to use, so unreliable when you change OS version.. it is seriously time to stop using Time Machine.. or at least supplement it with something more reliable.

  • Restore from time machine to SSD/HDD iMac

    Hi,
    I had to erase HDD/SDD on my 2011 iMac with both SSD and HDD drives. The system was installed on the 256 GB SSD ("Macintosh HD) and the user accounts on the much larger 2 TB HDD ("Macintosh HD 2"). I was able to restore the SSD with the system, software etc. Also one smaller account that was previously on the SSD also made the cut. However, I didn't figure out how to restore also the contents to the HDD and whenever I've tried to use the Migration Assistant I was told that there is no need to restore the user accounts that were sitting on the HDD (in fact, Migration Assistant said that there is only "1 kb" to transfer). I've then tried to manually copy the user accounts from time machine (on a Time Capsule) to the HDD but I've waited for hours (my account is roughly 1 TB big) - only to get error messages about permissions. Same story happened when I tried to log into my empty user account and tried to use time machine to restore my folders.
    How is this system supposed to work in the first place? Shouldn't the user accounts on the HDD be restored 'automatically' during a restore or when using migration assistant?
    Look forward to hear from you.

    samaki wrote:
    "This user's data doesn't need to be transferred")
    That seems to mean, their home folders aren't on the OSX drive, so Migration Assistant doesn't need to (or can't) transfer them.  
    We've asked Apple to address this, but it doesn't seem real common, and would make the Assistants rather complicated, especially for newbies.
    I've tried out many things I had come to get used to from 12+ years on the Mac
    Yeah, it ends up being a bit of a conundrum.  That's why it's often best to leave the home folders on the Startup drive, but put the data on the HD. 
    I've made a note to try to find a better workaround for your situation (the Disk Utility thing is fine, space permitting).  I tried a bunch of finagles when I wrote that page, but maybe something will turn up with a fresh start.
    Retrospectively, perhaps, it was a mistake to have the time machine backup sitting on a user account specific folder on the time capsule (named after my first name) instead of the standard "Data". Both the setup assistant after flatting the drives and reinstalling 10.8 and the Migration Assistant seem to have had trouble to recognise the password protected location.
    It does complicate things. 
    For the future I'd loved to know what one could do to streamline this should the need arise again?
    What I'm thinking of is, if you still have access to the old Mac, to create default home folders on the SSD, point the accounts to them, so they can sign on.  Then either transfer directly from the old Mac, or do a backup and transfer from it.  Log on to each user account, copy the home folder, then redirect the account to that one.  Sounds promising, but there are a couple of "gotchas" there, I think.
    I'll let you know, and revise that page accordingly, if I figure something out.
    Thanks for the feedback - - it gets me thinking. 

  • Can't restore from Time Machine

    I have an early 2011 17" MBP, the last model made, I think. I use the pegasus 12 TB thunderbolt setup with time machine to backup my files.
    I've had no problems, all is well.
    My computer has been slowing down since I installed Mountain Lion. It has reached the point of absurdity it is so slow now. I decided to do some looking around and figured I would do the following:
    1) get a 6G SSD 480GB and put it in the main hard drive and keep the former hard drive with all its data as a separate external backup.
    2) put in a new install of Mountain Lion. Reinstall all my programs: Aperuture 3, Photoshop CS6, pages, quicken, and so forth.
    Sounds simple enough. Got my SSD drive this morning from OWC. Install was simple, went into internet recovery mode. It all worked great.
    I did not want to just image back from TM all that I had because it was so slow. Seeing as I'm going to also put a second HD where the optical drive currently is, I wanted to install carefully on the SSD to maximize speed and space.
    The reinstall of 10.8.x went well. Talk about zippy, wow. Got linked back up to iCloud, all the usual email, contacts, etc synced with the computer flawlessly.
    So far, all is going well except for one minor deal. Major deal.
    Time machine is recognized fine by the fresh install. I can open TM and see the Pegasus with all it's information. However, I cannot find but the image for "now." I cannot go back any further for some reason. I did change the name of my new hard drive, could that be an issue?
    I cannot find my disk of Aperture 3. I had purchased Ap2 and kept upgrading with CD's through AP3. The AP3 I have is an upgrade disk and for whatever reason, I cannot seem to find any of my former Aperture disks. Simple enough, I thought, I'll just restore AP3 from Time Machine.
    Same problem is happening: I can see Aperture 3 in TM. I highlight the app. The "restore" button is greyed out and I can only access the "now" image and cannot go further back on images/time.
    Any idea why Time Machine is not working with restore? Why I cannot take all the last year of faithfully saving daily backups to time machine and see them?
    I can't see them, restore them. Only the "now" image is visible and it will not let me restore anything. Anything. I tried various files, a single picture, and nothing is working. I am getting frustrated thinking that maybe this whole time machine as a backup is a joke.
    Help?
    Thanks.

    DocDoc, that worked. I read that page and it meantioned how to exactly click what. I'm not sure why TM is so particular, but nevertheless, I was able to open a finder window pre-TM, click on my new hard drive. Then I opened TM and again, clicked on my hard drive in that finder window. Then navigated to the folder I wanted, which was the applications folder.
    The "now" image wouldn't do anything when right clicked (on aperture.app) except offer to get info or to delete all backups of aperture. I almost gave up, figuring the purpled out timeline (as previous) on TM was bunk. I couldn't go backwards to a previous image before.
    But having navigated that exact way somehow made TM happy. A previous image about 1 month ago was able to be saved to my application folder. 986megs or something like that in a few seconds. When TB works, it zips right along.
    I don't care for how persnickety TM is, but am glad it worked nevertheless. Thanks for your help.

  • Can't restore from Time Machine "error occurred adding a recovery system"

    Here's the situation:
    MacBook Pro with Snow Leopard was upgraded to Mountain Lion 10.8.2.
    A Time Machine backup exists (on Time Capsule) from the day before the upgrade.
    I am trying to restore the Time Machine backup to a blank hard drive connected to the MacBook via FIrewire, but after rebooting with Command-R and selecting the backup source and HD destination I keep getting this (unhelpful) messages:
    "An error occured while adding a recovery system to the destination disk" and "the recovery system could not be added"
    Is what I am attempting impossible, or is there something else going on? What use is Time Machine if I can't restore?

    Hi FranzKafka
    I know it has been a while since your question, but the issue is possibly dependent on the blank HD, h=was it changed from the GUID partitioning?  If so change back and you will find the Time Machine will restore back... without having to reinstall OSX. As you say, all of the original settings are captuered within TM.

  • Going back to leopard from snow leopard Can I restore from Time machine

    My Imac continues to lock up about three times a day since I went to Snow Leopard.
    I want to go back to Leopard where I did not have these problems.
    Can I reformat and do a clean install and then restore everything from time machine even though the back up is from Snow Leopard?

    You can restore the system to any previous dated state shown in your Time Machine backups. However, this will not preserve anything you created after that date. You can also restore individual files & folders from later backups but you may or may not be able to use files you created using Snow Leopard while running Leopard, depending on the parent application & if it was updated to use a new file format with Snow Leopard.
    It is generally much better to resolve the issues you have with Snow Leopard & continue using it than to try to do this. Most issues are fairly easy to resolve. If you want help with that, let us know.

Maybe you are looking for

  • Browse and Games icons have disappeared

    Hi My browse, favorites and Games icons have completely disappeared, when I go to my app I can see all the games installed, however I can not find them on my blackberry. I have already tried to updated it but says I have the latest version of softwar

  • IMovie, Garageband, iPhoto and iTunes no longer working together.

    I have seen several variations of this issue but NO solutions.  I work with iMovie almost every day; up until a month ago, all four (iMovie, Garage Band, iPhoto and iTunes) worked together perfectly.  iMovie no longer asks to make thumbnails of the v

  • Properties are not shown in the Logical model

    Sometimes when I right click on some entity in a logical model and select Properties - nothing happens and no properties dialog appears. The normal behavior restores after modeler is restarted. Is it a known bug?

  • How do I change default sound for alarm on iphone 5c?

    I don't like the default sound for my alarm on my iPhone 5c. How do I go change the default so I won't have to continually change it?

  • How to display image returned from servlet?

    Currently: I am getting an image from a database and displaying it using the below code. Desired: I want to display HTML also, not just the image. response.setContentType("image/jpg"); ServletOutputStream out = response.getOutputStream();        java