Can't retrieve voicemails

Hi there, I have a Skype number and I'm having a problem with accessing a recent voicemail. It's from yesterday, so it's not past the 60 day period after which Skype deletes voicemails. But it simply keeps saying that the voicemail is currently unavailable. I've tried quitting and restarting Skype, but the message persists.  Other voice messages from other numbers left yesterday and today play just fine. These are the only ones that won't play. I'm using Skype Version 7.7 on a Mac running OSX Yosemite 10.10.3.  Advice? Thanks! 

roseveleth wrote:
Hi there, I have a Skype number and I'm having a problem with accessing a recent voicemail. It's from yesterday, so it's not past the 60 day period after which Skype deletes voicemails. But it simply keeps saying that the voicemail is currently unavailable. I've tried quitting and restarting Skype, but the message persists.  Other voice messages from other numbers left yesterday and today play just fine. These are the only ones that won't play. I'm using Skype Version 7.7 on a Mac running OSX Yosemite 10.10.3.  Advice? Thanks! Are you still having the issue? I am having the same issue and can't seem to get it fixed.

Similar Messages

  • HT201436 Can't retrieve voicemail.  Phone takes me to greeting screen, but when I select default or record a  custom greeting, the save it, phone screen continues to show "saving greeting" I cannot get to the screen to check voicemail

    I think phone is 4s but might be a 4. Can't retrieve voicemail.  I've had the phone for months and have used voicemail. Now when I select voicemail the phone takes me to a page to set up greeting (custom or default) and when I select either one and then try to save it ( thinking maybe then I can get to my messages) the screen just keeps showing "saving greeting"
    Thanks

    Safe Mode (booting while holding down Shift key) should have disabled all the Login items, as well as any non-Apple startup items, including the launchd items.
    I'm out of "Easy" ideas, and anything I say after this, is just wild ideas, so feel free to ignore me.
    Have you tried different USB cables?  Maybe there is an issue with the USB connector, or the way you have to bend things to access your Mac mini USB ports is different from accessing your Wife's Mac mini USB ports?
    Try alternate USB ports.  Maybe there is a bad/marginal port/connector.
    Try removing all your existing USB devices.  If you are using a USB keyboard and/or mouse, try using a different USB keyboard and/or mouse (maybe borrow them from your Wife's Mac mini).  Basically remove all other USB devices and replace the essential keyboard and mouse with known good ones).
    Desperate measure (Backup first before proceeding down this path).  Using a Firewire cable, boot your Wife's Mac mini into Firewire Target Mode.  Connect a Firewire cable between your Mac mini and your Wife's while your Wife's is in Target Mode.  Now boot your Mac mini holding down the "Option" key, and select your Wife's Mac mini's disk to boot from.   Essentially you will be using your hardware and your Wife's software to see if you have a hardware issue, or if it is a software issue.  That is to say if it works with your Mac mini booted from your Wife's boot disk, then your hardware is fine, but there is something wrong with your software.  If it does not work, then it is your hardware.
    Hopefully, you Wife will not kill you for even mentioning this.  ALSO, if you do try this, BACKUP, BACKUP, BACKUP first, especailly her system.  Not that anything will go wrong, but if it does, the last thing you want is an annoyed Wife :-)  BACKUP!

  • Can't retrieve voicemail with the 4.2 "update"

    i've got the iphone 3g and updated to the ios 4.2 and now with this "update" i can't retrieve voicemails. i get a password prompt, but i never set up a password to retrieve voicemails.
    does anyone have a solution? i'd like to avoid setting an appointment with the "genious bar" if i can.
    also...apple, will you please provide an update that will give my phone the performance that it had prior to the 4.0 "update?" i just want my phone to work as good as it did prior to the 4.0 debacle.
    thank you in advance

    First, you are not addressing Apple here. This is a user to user technical support forum. If you want to let Apple know something, you use this feedback link. [www.apple.com/feedback/iphone.html]
    As far as the voicemail, it had to be setup the first time, maybe they took care of it for you at the carrier. I'm not sure where you are, however if you are on AT&T, they will reset your password for you, you can log in with that, and then reset the password to something that you would remember easily. The voicemail password doesn't always get deleted when updating, but sometimes it does. It didn't for my update, but it did for my son's.
    Message was edited by: ChrisJ4203

  • Cisco Unity: Can't retrieve voicemail from phone, but received email.

    Hi,
    Any help will be much appreciated. I've been trying to fix this issue for 3 of 280 voicemail users for a month now but of no success. I tried following solutions from this link (https://supportforums.cisco.com/message/1184794#1184794) also but of no success. When I'm trying to retrieve voicemail from the phone, it says, "Sorry, this system is temporarily unable to complete your call. Please call again later. Good bye."
    I have Unity version = 4.0(3.0). From the Unity application event viewer, I can see these two errors after I tried to retrieve the voicemail.
    Event Type: Error
    Event Source: CiscoUnity_ConvMsg
    Event Category: Network
    Event ID: 10046
    Date:  9/26/2011
    Time:  PM 4:57:24
    User:  N/A
    Computer: NTUCUN01
    Description:
    Unity was unable to determine the mailbox status for the subscriber. Unity needs to know if the mailbox has the ability to send and recive mails. Technical details - GetMailboxStatus returned [0x8004000c] on line 98 of file e:\views\Unity4.0.2.122\un_Core2\ConversationEng\AvStateSvr\AvSGetMailboxStatus.cpp.
    For more information, click: http://www.CiscoUnitySupport.com/find.php 
    Event Type: Error
    Event Source: CiscoUnity_ConvMsg
    Event Category: Network
    Event ID: 10045
    Date:  9/26/2011
    Time:  PM 4:57:24
    User:  N/A
    Computer: NTUCUN01
    Description:
    Unity was unable to retrive the mailbox for the subscriber to verify the status of the mailbox. Unity needs to know if the mailbox has the ability to send and recive mails. Possible reasons could be a missing mailx, which can be determined through DBWalker or a corrupt memory. Technical information IAvDohMailUser::get_PrimaryMailbox returned [0x8004000c] on line 199 of file e:\views\Unity4.0.2.122\un_Core2\ConversationEng\AvStateSvr\AvSGetMailboxStatus.cpp. Check the return code through DohErrorTest tool.
    For more information, click: http://www.CiscoUnitySupport.com/find.php 
    Thanks!

    Hi,
    Have you tried any or all of these steps:
    1)Run Permissions Wizard again.
    2)From the AD Users and Computers snap-in, check the mailbox rights of the affected users. Compare their permissions with those of working users.Make appropriate Changes.
    http://support.microsoft.com/kb/310866
    3)Use dohproptest to log in to the affected users mailbox and confirm if you can log in successfully.
    you can find dohproptest tools in Commserver/TechTools folder.
    #From start button, goto run and give the complete path of the "dohproptest.exe" file followed by "-a" switch as shown below:
    "C:\Commserver\TechTools\dohproptest.exe -a"
    #When asked for password, put in any random password and continue.
    #Click on the "Ignore" button in the next warning window.
    #You should now see the main window of the tool.
    Highlight MailUsers.
    #Highlight the alias of the subscriber who cannot listen to their messages over the phone.
    #Click Get User's Mailbox.

  • Can't retrieve voicemail without restarting phone

    For several months I have been dealing with a real nuisance and wondering if anyone else is, as well.  Whenever I get a voicemail, before I can retrieve it, I have to turn my phone off and on.  It will allow me to listen to multiple messages but once I leave the VM system, in order to listen to them again I have to restart the phone.  I absolutely HATE this phone and am just waiting until December when I'm eligible for an upgrade.  This is just one of many problems I've had with it.  I didn't want to go with an i-phone, but seeing my daughter have no problems like I have has convinced me that it is the superior device. 

        Hi there Shytel!
    Wow! That is the strangest way to access Voicemail I've ever heard of! I am so sorry you've been having to do this for so long.
    Before you actually reboot your phone, when you try to access voicemail, what happens exactly? Are you dialing *86-send manually or are you trying to access the Voicemail when you get the notification at the top of the phone?
    I'd love to figure this out together! Let me know!
    Thanks,
    MelissaM_VZW
    Follow us on Twitter @vzwsupport

  • HT201436 I can't retrieve a voicemail. I need to listen to it again. Please help asap.

    I can't retrieve a voicemail to listen to it again.  It has not been deleted.  I simply need to listen again to retrieve the phone number that was listed as unknown.
    <Subject Edited by Host>

    If it has not been deleted then what is the issue?
    Please explain

  • Help! i just lost all my voicemail messages! how can i retrieve them?!

    Help! i just lost all my voicemail messages! how can i retrieve them???

    I also experienced loss of important archived voicemails on my Iphone on two occasions within the last 12 mos:
    1. after upgrading my Iphone 4S to an Iphone 5 using Itunes backup and then erasing my Iphone 4s. I lost all my voicemails older than 90 days (ATT is my carrier). I was able to recover the old voicemails by restoring my Iphone 4s from my Itunes backup and holding onto that device for reference.
    2. again, six mos later after restoring a new Iphone 5 using a recent ITunes backup after water damage to my first Iphone 5. Nobody in my local Apple store or on Apple phone support, including a "senior techniciaan" had any useful knowledge to assist me with this frustrating issue. Ultimately, I spent many hours researching this myself. Apparently, there is a bug in the Iphone 5 OS when restoring from ITunes. I don't know if this problem also occurs after restoring from an ICloud backup. However, I found that Iphone voicemails are available for a limited period 30-90 days through your phone carrier ie. ATT, Verizon, etc but more importantly, ALL voicemails are archived on an ITUNES backup regardless of age assuming you didn't delete them off your IPhone before last backing up your device. So, if you lost or damaged your IPhone but have an ITunes backup, all you need is an ITunes extractor, unfortunately not available through APPLE. Apple reps are not authorized to discuss non-apple issued software even if they're aware. There are several ITunes extractors available for music, photos, SMS files etc but most don't also have the capability of opening the embedded voicemails. Happily, using this software, I successfully extracted from my ITunes backup file ALL my voicemails old and current, using www.backuptrans.com/itunes-backup-extractor.html (Mac and Windows versions available). A life-saver!

  • I know I can retrieve voicemails from callers I have blocked but is there anyway to retrieve imessages from blocked callers?

    I know I can retrieve voicemails from callers I have blocked but is there anyway to retrieve imessages that were sent while a caller was blocked?

    No.

  • I recently uploaded 10.8, but I have a number of VALUABLE old files which I can no longer read because "power PC applications are no longer supported.  How can I retrieve them?

    I recently uploaded 10.8, but I have a number of VALUABLE old files which I can no longer read because "power PC applications are no longer supported.  How can I retrieve them"?

    Here is a post I assembled for another with a similar problem:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PPC software or Lion/Mt. Lion;
    3. Upgrade to an Intel compatible versions of your software, or find alternatives that will open your data files;
    3.  Install Snow Leopard (with Rosetta) into Parallels:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • Can not retrieve data source status

    I have 3 DPS (6.3) running fine with 3 (6.2) DS downstream, running fine as well, on RHAS 4 U4 .
    I don't understand why the DPS console always report it can not retrieve the data sources status. I checked the DS access logs, and I see each DPS
    default monitoring request (on the "" DN) every 30 seconds, which returns one entry, and no obvious error in any DPS or DS error log .
    Any idea ?

    Hi,
    it looks like a a known problem to me that may appear in the following situation:
    In somes cases, the proxy and the DSCC (console) uses different hostnames: For instance, the proxy may be registered to the admin framework as myhost.sun.com and the proxy itself may use only myhost. Operation status is exposed by the proxy as an LDAP entry with dn cn=myhost,.....,cn=monitor. When there is a naming mismatch, the console search for cn=myhost.sun.com,...., cn=monitor and can't find the entry, so the status is unknown.
    Don't know if you are in this situation but it might worth checking this.
    Hope this helps
    -Sylvain

  • How can I retrieve values from integer array in sqlplus?

    I'm trying to write a query against OEM grid tables to come up with the result to show all scheduled backup jobs, in OEM grid, there is a table sysman.mgmt_job_schedule, one of the column DAYS is defined as TYPE SYSMAN.MGMT_JOB_INT_ARRAY AS VARRAY(5000) OF INTEGER,
    if I do select days from mgmt_job_schedule, it returns something like (2,3,4,5,,,,,,...), I want to retrieve the digits and translate them into Monday-Sunday in combination of other columns, but I'm new in varray, I don't know how can I retrieve the values in sqlplus, can you guys help me on that, My query is as follows, I got all the jobs I wanted already, just need to interpret on which day (week day) it is scheduled.
    Thanks
    select JOB_NAME, JOB_OWNER,job_type, mjs.START_TIME, DECODE(mjs.frequency_code,
    1, 'Once', 2, 'Interval', 3, 'Daily', 4, 'Weekly',
    5, 'Day of Month', 6, 'Day of Year', mjs.frequency_code) "FREQUENCY",
    mjs.days
    from mgmt_job mj, MGMT_JOB_SCHEDULE mjs
    where mj.SCHEDULE_ID=mjs.SCHEDULE_ID
    and mj.job_type='OSCommand'
    and mjs.Frequency_code in (3,4)
    and mj.is_library =0

    select job_name, job_owner, job_type, mjs.start_time,
               decode (
                    mjs.frequency_code,
                    1, 'Once',
                    2, 'Interval',
                    3, 'Daily',
                    4, 'Weekly',
                    5, 'Day of Month',
                    6, 'Day of Year',
                    mjs.frequency_code
                    "FREQUENCY", mjs.days, column_value
      from mgmt_job mj, mgmt_job_schedule mjs, table (nvl(days,sysman.mgmt_job_int_array(1,2,3,4,5,6,7)))
    where       mj.schedule_id = mjs.schedule_id
               and mj.job_type = 'OSCommand'
               and mjs.frequency_code in (3, 4)
               and mj.is_library = 0you may need to tweak the values in sysman.mgmt_job_int_array: use less or other values or simply put them null ....

  • Crystal Report can only retrieve 1 row of data

    We are using the following configuration:
    - Microsoft Windows 2003 Server R2 for x64
    - Microsoft .Net Framework 3.0 for x64
    - Oracle Client 10g 10.2.0 for x64, which inlcudes Oracle Provider for OLE DB 10.2.0.2.21
    - Crystal Report 10 redistributable for x64, from Visual Studio 2005
    With that configuration, each time we run a report in ASP.Net, we can only retrieve 1 row of data, even though the data is more than that. We have no issue running the same report in 32 bit (same configuration as above, but 32bit).
    For the meantime, we use ODBC connection, and it runs well. But, ODBC is slow and since the system that we build is still under heavy testing, if any problem occurs during report generation, it locks up other reports and we have to restart the IIS. So, ODBC connection is definitely a no-no.
    Please help.

    I have the same problem which is assigned uder bug:6623430
    Still waiting for fix...

  • After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version.  Can I retrieve that icon and thus that facility?

    After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version.  Can I retrieve that icon and thus that facility?

    Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.

  • I use my intel iMac offline and have forgotten my password. How can I retrieve it? It won,t let me reinstall - adrian

    I am trying to reinstall OS on my offline IMac intel but have forgotten the password and can't retrieve it. How do I reset password?

    This article should help you solve that:
           http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/

  • HT1349 i have forgotten my password. how can i retrieve it or reset it?

    have forgotten password. hint is old and doesn't work. can't retrieve serial number either. any ideas?

    (1) What to do about a forgotten password depends on what kind of password you have forgotten.  Some Apple passwords are not recoverable.
    Click this link for Apple Support articles search for "forgotten password".  Then use the help (if any) in the article related to the type of password you mean.
    (2) How to find Apple serial numbers depends on the item.
    Click this link for Apple Support articles search for "how to find serial number".  Then use the help related to the item you mean.
    (3) You might want to correct the MacBook, iOS 6.1.3 "Product" information
       on your Profile Page. 
    All MacBooks use a version of Mac OS X operating system.  No iOS software is runs any MacBook.
    iOS 6.1.3 is an operating system that can only be used on iPhones, iPads, and iPods.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

Maybe you are looking for