Can`t save numbers files anymore after upgrading to mac os x lion

i am dumbstruck.
right after upgrading my snow leopard system to the new mac os x lion i am not able to save old files of Numbers any longer.
i was about to update a file and it says that the permissions wouldn`t fit.
but even when i change all the permissions to 777 to problem persists.
any clue whats going on here? apple?!
thanks for hints or help!

hey -mvimp and thanks for your reply,
meanwhile i uninstalled numbers and reinstalled it.
still had the problem with the old files, but now i could somehow make a duplicate (copy) of the file under discussion and save it back to disk. so i am at least able to continue with older files.
strange effect this lion upgrade has ...

Similar Messages

  • Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

    Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

    PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
    Quit Elements.
    Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
    Delete the following files from the Preferences folder:
    com.adobe.PhotoshopElements.plist    
    Adobe Photoshop Elements 11 Paths
    Adobe Photoshop Elements 11 Settings
    Delete this file from the Saved Application State folder:
    com.adobe.PhotoshopElements.savedState

  • I can't log on my bank after upgrade to Mac OS X Lion 10.7

    I upgrade to OS X Lion this weekend and today I tried to log on my bank (Santander), after I type my password nothing happens, I mean cannot access my account....what I should do? Does anyone is suffering this problem?
    Tks a lot
    B. Rgds
    Marcelo Richard

    Try this...
    Quit Safari.
    Launch Keychain Access  /Applications/Utilities
    Select Passwords on the left.
    Delete the bank keychain.
    Relaunch Safari. Go to: Safari / Preferences - select the Autofill tab. Make sure: User names and passwords is selected.
    Now select the Privacy tab. Click: Remove All Website Data
    Navigate to your bank site. Login with your user name and password. You should be prompted to save that data to a new keychain, click Yes when prompted.

  • I can't save files anymore after upgrading to iOS8. Do I have too many on my iPad?

    I'm a heavy Photoshop Touch user, with the last version of the app and iOS 8 on an iPad Air, and lately I often can't save the files I've been working on: the app suddenly quits as soon as I try to save the often multilayered image, but also lighter photographs. If I restart the app, it doesn't help.
    I have a lot of files in my PS Touch library. I don't know how many exactly, or how much the whole library weighs. I have plenty of space available on the iPad (42 GB free) however, so that's not the issue. I've been uploading files to the Creative Cloud lately, and deleting them afterwards from the PS Touch library on the iPad, but there are still hundreds of files in that library which were not uploaded to CC because I didn't yet have access, and which I therefore can't delete yet to make room.
    Attempts to automatically sync all files to CC have failed. The app unexpectedly quits.
    Uploads to CC of the files is possible in small groups —but extremely tedious, impossible in fact as there are too many files. I can't even scroll down the library very far without provoking a freeze of the app.
    Furthermore, it doesn't look like I can extract the files through iTunes. I can't see the library of documents contained in PS Touch on iTunes. I subscribe to the Creative Suite on Creative Cloud, but that's of no help, I imagine. Except that I'd perhaps be able to open all the PSDX files in Photoshop cc if I was able to retrieve them.
    Question: Assuming there is a memory problem, is there any way of extracting a large number of PS Touch files from the iPad to make room and clean the app up, so that I can work with it again?
    Any other idea so that I don't lose all this work?
    Message was edited by: ibarrien

    Hi Ignacio,
    There were 1271 files in my PS Touch library. They were most often multilayered. I copied them to iTunes in batches of 20-50, then saved them to my Mac.
    I initially tried quitting all other apps to liberate some RAM, but that didn't help. It must be a memory problem within the PS Touch app itself.

  • Can't open any iWork file anymore after upgrade !

    Hello, I just upgraded my Pages, Keynote and Numbers from iWork '08 to the new Mavericks versions. I can't open any file anymore!  I got the message that these files are to old and I have to save them first with iWork '09 applications which I do't have! Help please.

    Finally got my hands on iWork 09 and converted all my files individually!
    The iWork guys can still learn something from Microsoft with respect to backwards compatibility!

  • Problems Problems after upgrading to Mac OS X Lion

    I upgraded my mac os to Lion last week on my Mac air.  After loading, my norton could not work probably. Then last night, files in my start up disk doubled and hence error appeared - that my disk is full while I only used 50% of the storage capacity.
    This morning my iphone 4 also appeared to be have the SMS messages and photos and every files also appeared to duplicate itself.
    Can anyone assist ?

    After loading, my norton could not work probably.
    Does Norton ever work properly? 
    Norton is a known troublemaker, and most likely the version you have is incompatible with Lion.  You could try updating Norton, but personally, that's one I'd remove immediately and never come near again.  If you feel you need AV software on your Mac, the only thing I would recommend wholeheartedly is ClamXav.  Sophos' free home AV software would be my second choice, though with some reservations, as I've heard of people having problems with it.
    As to the doubling files problem...  can you describe more precisely what you're seeing?  I've never heard of such a problem before.

  • After share moved to new Server User can't save .xls file anymore.

    Dear Forum,
    we have a strange problem here. Situation:
    A fileshare got moved from a very old Server 2000 to our new 2008 R2 Server. Ever since the departments share moved Servers she (and her colleagues) get "unsuspected file lock by user" messages. Even if they unlock it and change something they
    can't save it.
    There was a file lock from that user even though she wasn't logged in. We removed that.
    There were some crude inherited rights from the old share. We purged them and the rights should be ok. (effective file permission says so, too!)
    Her tmp files were deleted.
    I for example can access the file without problem.
    We are currently out of ideas and any help is apreciated.
    Regards,
    t.zimmermann

    Hi,
    Could you please post error message using English language, the error message in the screenshots is not English.
    Please refer to the thread below to troubleshoot the issue:
    Word and Excel show locked for editing by 'another user' when opened from File Explorer
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/61fdf388-e674-4a54-9c2e-0c1faf2cd4f7/word-and-excel-show-locked-for-editing-by-another-user-when-opened-from-file-explorer?forum=officeitproprevious
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Can't save new comm channels after upgrade to PI 711

    I've been provided a recently upgraded PI system, 7.11 from 7.1.
    After creating a new comm channel and adapter type, and trying to save, the following error is displayed:
    "The chosen Adapter Engine has version 710 but the chosen Adapter Metadata has version 711. Use Adapter Metadata with the same or with a lower version as the Adapter Engine instead"
    At the beginning I couldn't even see the File/RFC/Idoc/... adapter type of SWCV 7.11. I could only select the adapter types of SWCV 7.10. so I imported the ESR content for SWC SAP_BASIS 7.11. Now when selecting the adapter type I have both versions, 7.10 and 7.11.
    I suspect some post upgrade operation was skipped, but I'm not sure.
    Thanks

    Dear Jorge,
    I do have the same issue.
    My PI 7.11 system is sending its data, RZ70 for ABAP and SLD_DATA_Supplier for JAVA - to our SAP Solution Manager.
    SAP Solution Manager's SLD runs on SAP NetWeaver 7.01.
    PI's SLD runs on SAP NetWeaver 7.11.
    What do you mean by local SLD ?
    Do you mean that my PI system must pointed to its own SLD, running on SAP NW 7.11 ?
    Thanks
    SAP NetWeaverAdmin

  • The app Goodnotes 3 keeps crashing and I can't save the files anymore

    Hi,
    I have the app goodnotes 3 but today I changed to another folder inside the app and now it crashes as soon as I open it, so that I am not able to safe my Documents or export them to itunes. I am pretty despreate because there is a pretty important document inside the app that I can't access anymore now. I have tried restarting the app and the ipad but that doesn't seem to change anything.
    Would it be possible to make a backup of the ipad and restore it? Or do I loose the documents inside the app ?
    Greets Nick

    Hello
    When you back up your device using iTunes or iCloud, the application data is saved. You can try the back up and restore to resolve your issue with the app itself crashing on you.
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    iCloud: iCloud storage and backup overview
    http://support.apple.com/kb/PH12519
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/ts1702
    Regards,
    -Norm G.

  • Can't copy large files anymore after downloading Mavericks, is anyone else having the same problems?

    I did drop my laptop a week ago but I tested everything and the USBs, CD Drive, and Pretty much everything else worked so I don't think it's that. Does anyone have the same problems or any advice for me? I have a Macbook Pro from August 2013

    This problem is often caused by "Google Drive." If it's installed, I suggest you first check for an update. If that doesn't solve the problem, remove it according to the developer's instructions. You may need to boot in safe mode to do so. Back up all data before making any changes.
    If you use Google Drive and don't want to remove it, then try deselecting the option in its preferences to "show status icons." According to reports, that may be enough to stop the Finder from crashing.

  • Arobat blocked after upgrade to mac os mountain lion

    Hello. Updated to Mac OS 10.8.3. Everything in Creative Suite went along just fine, exept Acrobat Pro: cannot open, ghostbusters symbol on icon. What to do? I'd re-install but I don't know how. And cannot open the uninstaller. same block.

    Hi, thanks for your reply. Here's what I see on my screen. It's more like a stop sign.
    Or is this an Apple issue?

  • Can't open Numbers file after moving it back to Mac from Dropbox

    Please help!  Can't open Numbers file after moving it back to iMac from Dropbox.   Says I need the newer version of Numbers each time I tried to open the file.  I am 100% sure that I had the newest version.   Spoke to the AppleCare guy and after doing the checks he is also sure that I had the latest version of Numbers and AppleCare can't help.  He suggested that maybe i should run it on a file repair program...any suggestion?... please help...

    I've read reports of people having trouble when storing Numbers 3 documents on Dropbox.  I think it's related to the fact that they're not really "files."  They're "packages" that look like files. I had thought that Dropbox had cleared this up with their latest update. You should be on Dropbox version 2.4 or later.
    If you have Time Machine you may have some luck going back in time and restoring the document from a previous version.
    Storing Numbers documents on iCloud works much better, at least for me, and (unlike Dropbox) iCloud facilitates automatic syncing to other Macs and iOS devices signed into the same Apple ID.
    Perhaps you could consider keeping Numbers documents in iCloud instead. iCloud is deeply integrated into the app, and now works well.
    SG

  • Can't view Camera RAW files in Bridge or Photoshop CS4 after upgrading to Mac Mavericks X OS.

    After upgrading my Mac operating system to Mavericks X I can no longer view Camera RAW images on either Bridge or Photoshop CS4!
    I'd already fixed the issue of not even being able to launch Photoshop by installing Apple's Java applet, but this doesn't seem to have helped with the Camera RAW situation.
    I've tried invoking "Update" in both Bridge and Photoshop, and both indicate there are no updates.
    I even went to Adobe's Camera RAW area, and downloaded and installed the Camera RAW plugin specifically for my cameras (Canon 5D Mk ii) and Photoshop CS4, and that hasn't helped at all!
    I feel that it's just another silly Java applet, but I haven't any idea how to proceed from here!
    HELP!
    Thank you,
    Bob

    Did you download and install the camera raw 5.7 update?
    Adobe - Photoshop : For Macintosh : Camera Raw 5.7 update
    There are also other updates you should install, such as 11.0.2 for photoshop and the bridge output module update, if you need them.
    Product updates
    Adobe - Bridge : For Macintosh
    Adobe - Creative Suite : For Macintosh
    Adobe - Photoshop : For Macintosh

  • Can't save Numbers spreadsheet

    When I reorganize a numbers spreadsheet, I can't save the file. I get an error message saying that "it cannot be saved." Using "save as" generates the same error. Anybody have a clue what's going on? I'm using an iMac (intel) with OSX 10.6.7.

    It's a relatively new computer and came with OSX 10.6.7.
    I'm using Numbers 09, ver 2.0.5.
    This is a spreadsheet that I created in Numbers. It has eight sheets that are interconnected. The formulas are not complex. I've used some conditional formatting in the header rows. I'm also using footer rows. There are simple graph charts (not 3D) based on spreadsheet data, but no other graphics. I did not use any links or shapes or other graphics. I would call it a simple multi-page spreadsheet with simple graphs.
    At the moment it is not a large spreadsheet. Each sheet has no more than 15 rows and columns.
    I can't find anything that would cause a save failure after reorganizing. It's puzzling and very annoying.

  • I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can't save the file "TEST.pages" because the volume is read only.

    I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
    I get the same message when using Numbers so I presume it is a OS problem

    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Back up all data before proceeding.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button
    Select
               ▹ Restart
    from the menu bar.

Maybe you are looking for

  • Apple ID on two different iPhones

    My parents accidentally used the same Apple ID for both of their iPhones. How can I unlink their accounts and create two different, unique Apple ID for each of their iPhones? And without losing what is currently saved to the iCloud (some of the info

  • Runtime error in function..

    I have the following function which gets compiled but gives user defined exception at run-time. What is wrong in the figure. create or replace function fn_voucher_sharing_check(ln_seqno number, ln_compcode number) return boolean as Module            

  • Can anyone help with this safari error, unexpectedly quits COMSOLMultiphysics tmp plugin

    I have a continual error (15times in 2 days) with safari quitting and this Plugin error. Is anyone familiar with it and can offer any suggestions as to going about sorting it. Thanks

  • How to get products based on Material Group 2

    Hi all, I want to find out all the products for a particular "Material Group 2". COMM_PRODUCT table dosent contain the Material Group 2 field. I tried finding in other tables, but couldnt find relation between Material Group 2 and the product. any hi

  • Help Needed to Sum Column in Fixed Table

    I am new to LiveCycle.  I need to sum a column in a fixed table.  My rows are summing correctly.  I have tried every formula on the web both in FormCalc and Javascript.  I've cut and pasted script from Adobe templates and from forms on the web.  Noth