Can't See Forms Box in Browsers

When on a website and a form comes up for me to fill in answers I cannot see the forms box I am to type answer/info in to.  I just have to keep clicking in the general area till I get it to allow me to type.   I have this problem in Safari and Firefox.  What do I need to do?  Is this a display setting in preferences?

How about ⌘/ - that's command slash -
Patrick

Similar Messages

  • Can't See Form Fields in Acrobat 9

    I created a form using the wizard. When I went in to create additional fields in the form field editor all the fields were gone and each field I added disappeared as well. My OS is 32 bit Windows 7 Pro. Everything is patched up to current levels. Someone told me they though this as a Windows accessibility setting my those must be for XP or something because the same settings don't exist in my version of Windows.
    I can't see forms in any document in the forms editor.
    Tom

    I concur with TSN. What I see is shown below:
    That looks reasonable. I assume this is also what TSN was seeing. The fonts are all normal Arial fonts. Even if you are on a MAC, I think the Arial would be replaced by Helvetica for viewing. 2 of the fonts are not embedded and you may not have the fonts on your system, explaining the viewing problem. The same is probably true for all the other PDFs you mentioned. You may want to see if you can add the Arial fonts to your system (again, we have no idea what that is).

  • Can't see forms anymore in adobe reader for iPad.

    Until the update I was able to read this form. Can anyone see why I can't any more? uwo.ca/fhs/kin/ug/programs/guides/honors_bsc.pdf

    Nevermind I solved my own problem.  I can see there has already been alot of people viewing this question.  So I'm going to post what I already posted as a discussion as a reply here.
    I'm not a computer wize and very new to Adobe and creating forms with LiveCycle. So apologize to anyone that reads this and says "duh", but hopefully it will be helpful to someone out there who is struggling like I was.
    First off - the IPad will will definitely be able to view your livecycle forms regardless of what anyone else says! These were my steps;
    1. Create form in LiveCycle Designer.
    2. When you save, select "save as"
    3. When the dialogue box opens, and you are creating the name of what you are going to call your file, below you will see a drop down box labeled "Save As Type". Make sure you switch the file type to "Adobe Static PDF Form (*.pdf)"
    And that's it!
    Here is another tip for a user like me:)
    I need to create a form to post to a website, where people fill it in and save it to their computers. I found that when I just saved the form straight from LiveCycle Designer and then posted, some of the free adobe versions (for PC's) wouldn't let the user fill it in. So this is what I did,
    1. Follow the first 3 steps I listed above.
    2. Next open Adobe (the full version) not the reader. I have Adobe X.
    3. Got to "Save As". It will give you a bunch of options. Select "Reader Extended PDF" and then "Enable Additional Features"
    Add that should be it!
    One more tip for the average to low level user. We had some feedback that when someone open my form in the iPad app. they were not able to fill it in. They could, but what they didn't realize was they needed to select the icon at the top that is a little picture of a speech bubble and pencile.

  • Sending form via email - can't see user responses in returned PDF

    I created a form in Form Central.  I chose "save as PDF form" and saved it on my computer.  I attached this form to an email and asked employees to fill out and send back to me as a pdf.  When people email me back their filled in form, I can only see the responses when I click on each individual box.  When I print the form, the responses do not print.
    Would appreciate help since I distributed the forms to the company, and realized there was a problem as responses started to come in today (I only tested it on my computer and had no issues)
    I would appreciate any help you can give.  Especially:
    Why is this happening? 
    How do I prevent this in the future?
    Is there anything I can do to resolve the issue, without having to send out an updated form?
    Christine

    The users filling out your PDF are not using Adobe Acrobat or the Free Adobe Reader to fill out your form - FormsCentral forms have to be filled out in Adobe Reader or Acrobat.
    Also, make sure that you are also using Adobe Reader or Adobe Acrobat to view those PDFs.
    The way to resolve this is to instruct your users to use Adobe Reader to fill out the form.
    This FAQ touches on the issue, but mostly related to the Submit button not working, however the issues you describe are caused by not using Adobe Reader or Acrobat as well: http://forums.adobe.com/docs/DOC-2653
    Thanks,
    Josh

  • The chat box goes down when i do split keyboard and I can't see what I am typing

    The chat box goes down when i do split keyboard and I can't see what I am typing

    I noticed that you responded to a very old thread about the split keyboard that I was in a couple of years ago and you asked this question about Skype and the spli keyboard.
    I Googled the question and the very first thing that I found form the Skype community was the recommendation to disable the split keyboard or just not use it, like I already stated.
    http://community.skype.com/t5/iOS-iPhone-and-iPad/Problems-in-using-Skype-with-i Pad-Mini/td-p/1376767

  • My photos just became empty boxes, if I click on them they open, but I can't see them at a glance. Anyone know why? thanks

    My photos on iphotos just became empty boxes, bordered by white intermittent lines. If I click on a photo it comes up, but I can't see what each photo is at a glance. Any ideas how to resolve this? thanks

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
    Regards
    TD

  • Can not see wave form in arrange window  logic 9 Please help

    I have been using Logic for 3 months now...mostly just importing old wave files from past protools sessions.  Everything was working fine until I created a new session to record audio.  I record the audio at a nice level...I hit playback...I can hear it fine but I can't see the wave forms.  I can see it in the sample editor.  I've searched around and found the same problem in the past on some forums......they say to trash preferences...  I went to my mac drive...library...preferences  and nothing  I have no files labeled  com.apple.logic.pro  now I'm lost....the funny thing is... when I zoom in horizontal ...the wave form shows but it makes the track way too large.  Any help would be great.  Thanks

    In Logic:  Preferences/Audio
    What is the "Recording Delay" parameter set to?
    It should be zero, default is zero. If it's set to a positive or negative Logic will often not show the wavforms. If that's it, it's one of the long standing bugs in Logic.

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • Can't see some letters from my Gmail box in Mail.app in MAC OS 10.8.5.

    Hello, can't see some letters from my Gmail box in Mail.app in MAC OS 10.8.5.

    The solution was to remove all versions of Acrobat Pro and reinstall Acrobat Pro XI. I still had the download file in my Time Machine backup. That's a good thing, since the download link from the order listing on the Adobe website under my account would not work.
    The problems don't occur with version 11.0.0. I got the work done, now I'm updating to 11.1.0 and will report if they came back.

  • I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

    I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

    Another View.
    the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

  • How can I see the numbers of lines selected in a Multiple Selection Box?

    Hi everybody,
    what I want to do is to get in an array of numbers all the lines selected.
    For instance, if I select the rows 1,4 and 7 from a Multiple Selection Box
    of 10 rows in total, how can I see that array when the rows 1,4 and 7 are
    selected?
    Because I want to connect this numbers to Case Structure and if the only
    rows selected are 1,4 and 7, the Case Structure will only realize this cases,
    and the rest will be ignored.
    I'm sure there is some way to get what I want.
    Thank you for your helpful.

    THANK YOU VERY MUCH. IT WORKS PERFECTLY!!!
    "Dennis Knutson" wrote:
    >>If you just wire the list box to an array indicator, you will see that
    the>output is an array of the selected items. Auto index the array through
    a>for loop that has your case statement inside.>>Dennis Knutson>>"Carlos
    Jorge" wrote>>Hi everybody,>>what I want to do is to
    get in an array of numbers all the>lines selected.>For instance, if I select
    the rows 1,4 and 7 from a Multiple>Selection Box>of 10 rows in total, how
    can I see that array when the rows>1,4 and 7 are>selected?>>Because I want
    to connect this numbers to Case Structure>and if the only>rows selected are
    1,4 and 7, the Case Structure will only>realize this cases,>and
    the rest
    will be ignored.>>I'm sure there is some>way to get what I want.>>Thank you
    for your helpful.>>

  • Can't see the icons on Forms Server

    Hi
    I have a little, but at the same time great for me.
    I can't see the icons on the Forms Server, and I have translated
    all Icons to Gifs.
    I need re-compile the forms to apply this changes?
    Where I have put the icons? (The correct path on the Alias of
    Apache)
    Thanks and best regards.
    Carlos Hernandez
    Barcelona

    Hi
    I just got my Apache web server running and added the images
    into a folder in the ORACLE_HOME\Apache\Apache folder. Then in
    the httpd.conf file look for where to add an Alias add in your
    Reports virtual path along with the directory and stop and start
    the apache web server then open the forms. Good luck
    -Nina

  • There are hidden pages in the PDF form I have.  How can I see and print all without clicking on the

    I have hidden pages in the PDF form I'm using (but didn't create).  How can I see and print all the pages at once without clicking on the "next page" button.  In the initial view, there are four pages, but if I click the "next page" button, there are a total of 12 pages in this document.  This is three budget years, each year being 4 pages long.

    You're most likely dealing with a dynamic XFA form created in LiveCycle Designer. You can open it, click the button, and save it, and it will most likely be 12 pages when next opened, but it depends on how the form is set up. The ability to make edits to an XFA form in Acrobat is very limited, especially for dynamic forms, so things like flattening aren't possible.
    If it's not an XFA form, you'd still need to click the button at least once and save. To say for sure what's possible, I'd need to see the document. Can you post it somewhere?

  • How can i see events in iPhoto in list form?

    I just got an iMac and have imported all my photos from my PC to iPhoto. Now I want to view the "events" in a list form, but can't see how to do that and can't find any info in Help or the user interface. Anyone know how to do this?

    Go to the Photos mode and in View enable Event Titles:
    Then you'll get this type of list:
    To open or close all events at one time Option-click on the triangle at the beginning of the Event title.

  • I use a iphone and MacBook Pro using mail on each.  How can I see the same mail boxes on the laptop that I see on the iPhone?

    I use a iphone and MacBook Pro using mail on each.  How can I see the same mail boxes on the laptop that I see on the iPhone?

    for starters this is not the forum for notebooks or for that matter icloud or iphone.
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/iphone

Maybe you are looking for