Can't see ics comments without using a text editor

I received an email from a contact that contained JUST an ics file with the subject 'Countered: blah blah blah'
When I double clicked it just went to the Calendar app to the meeting I had scheduled this morning.
I asked a windows using co-worker to try clicking on the ics and for him it opened up and showed the comments 'I have to reschedule yadda yadda yadda'
I can open the ics with textedit and see the comments field, but is there anyway to see that from Calendar?
Thanks, Jeff
MBPr 10.10.1

Hello!
You should be able to see comments by doubleclicking on the event in Calendar:

Similar Messages

HT4623 I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

Hello anacc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

I want to download an audiobook, but my daughter has a giftcard credit on the account. How can I download my audiobook without using the money from her giftcard?

I want to download an audiobook, but my daughter has a gift card on the account. How can I download my audiobook without using the money from her gift card?

go directly to your ibook app. and you're going to find it. it's only with ibooks app.
best
Olivier
<Edited by Host>

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

How do I add a yahoo search field to my toolbar so I can always see it? It used to be there until a month ago and now is gone.

how do I add a yahoo search field to my toolbar so I can always see it? It used to be there until a month ago and now is gone.

If you either updated to Mountain Lion or updated to Safari 6 under Lion then there is a unified URL address bar with the search. I personally don't like it either.

I can't see the Greek characters using ADOBE reader

Dear colleagues,
Your help will be appreciated for the following problem:
I have a tool which converts IBM I (AS400) spool file to PDF.
The file has been copied to Windows environment.
On generated PDF I can’t see the Greek characters using ADOBE reader v10.1.4.
If I use Notepad to display the file, I can see the Greek characters.
It seems that following PDF keywords are not recognized form PDF reader.
/BaseFont /Courier
/Encoding /WinAnsiEncoding
I have tried to use various fonts and encoding (cp1253, ISO8859-7) with no luck.
On PDF reader folder there is the following file:C:\Program Files\Adobe\Reader 10.0\Resource\TypeSupport\Unicode\Mappings\win\CP1253.TXT
I believe somehow to tell PDF reader to use this encoding.
What actions required on our Win/PDF environment setup?
What actions required on PDF file generation? (/BaseFont, /Enconding, etc)

Too many assumptions! It is much, much more complicated than your attempted solutions. The PDF Reference shows the contents of WinAnsiEncoding; this is as for your first example. I feel you probably need to spend very much more time reading this book.
In the second example you are using a different code page (or other encoding method) to view the data. This is not going to help you because WinAnsiEncoding is fixed in all environments and does not use the code page.
To use greek characters you will need the PDF to
- use fonts which contain greek characters (the built in Courier PostScript font probably does not)
- use an Encoding which references the greek characters. There are no built-in encodings that do this
You cannot make simple cosmetic changes to this file to do this. The style of simplified font with no FontDescriptor can be used only for the built-in 14 fonts, which cannot be used with a greek encoding.
Commonly, a combination of the greek letters in the Symbol font and the Latin letters in another font are used by constant font switching. This is of course only a solution for Greek, not other non-Latin alphabets.

How can I see all the idocs used in the system

I am very new in this area. How can I see all the idocs used in the system. Those which are posted and those which are not.

Check thes sap help links:
http://help.sap.com/saphelp_nw70/helpdata/en/90/c4b523c4c411d2a5ee0060087832f8/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/d5/edf15ddcdc11d1890c0000e8216438/content.htm
- Regards, Dibya

How can I start windows 8 without useing my password

how can I start windows 8 without useing my password

Hi,
Review the information posted in this thread.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can't see person i called using facetime

Can't see person I call using facetime.

I assume this is due to the fact that system detects your internal monitor as default one, and that is there where system sends main data. In order to force system send data to the external monitor, get a mouse and physical keyboard, close MB lid, and then press any key on the external keyboard.
when you get there, go to system preferences/display, and manually move the Apple upper bar to the external monitor, then choose mirror; ultimately, set optimal resolution.

What are SMOUTIL1,SMOUTIL2,SMOUTIL3?where can i see?how to use them?

What are SMOUTIL1,SMOUTIL2,SMOUTIL3?
where can i see?
how to use them?
Please tell me,Thank you very much.

SMOUTIL1, SMOUTIL2, SMOUTIL3 are considered the WMD's of the CRM middleware.
If they fall into improper hands, your middleware system could be wiped out and destroyed, reaping havoc on both CRM & ERP.
Please read the all the documentation located here, before you try to use these wmd's.
http://help.sap.com/saphelp_crm40/helpdata/en/c8/93ad3a9bfd664ee10000000a114084/frameset.htm
You may want to also first read the book just published by the SAP press called the SAP CRM Middleware optimization guide, before you try doing any work with the CRM middleware.
Take care,
Stephen

Can not see TC hard driver using istat pro or activity monitor

I upgraded the firmware of TC to 7.4.1 yesterday, but I found the transfer speed was too slow and I noticed that I can not see the TC condition using istat pro or activity monitor. So I downgraded the firmware to 7.3.2. Now the transfer speed is fine but I still can not see the TC hard driver in the istat pro or activity monitor.(but I can access files in the TC hard driver normally)
Can anyone help?

I couldn't see my TC hard drive in iStat pro until I actually mounted the TC's Airport Disk using the Finder 'Connect to server' dialog. iStat Pro only gives me Used and Free GB for my Airport Disk. My TC is an old 500GB upgraded to 1TB running 7.4.2 firmware.
As to checking the temperature, I'd be interested too. I have a digital thermometer taped to the top surface of the TC and it is reading 46C with an ambient of 17C. The TC sits on top of a cupboard with clear space around, and I am resting it on a spacer which lifts it 12mm clear of the cupboard to give it the best ventilation. The TC has been doing a long (08:00 - 21:00) Time Machine backup today.
Sayling

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

Why don't you ask this question on the iDVD forum?

Can we see the actual Tables using Record History through forms

By using record history in Oracle Financials it shows only the associated view can we see the actual table using that record histoy
Thanks a lot

Thanks Kiran
Actually i am new to Oracle Financials Technical side i have experience in Oracle field and want to work technically on apps side so i need to have check which form is on which base table and wats the relations etc thats why i am serching from front end the actual tables info
Anyhow Thanks

Can i create apple id without use the credit card?

can i create apple id without use the credit card?

I'm getting the same thing. I created a new Apple ID via the Internet (appleid.apple.com) When I go to my device to try to use it, I have to review it first and in that process, I'm asked for a credit card or iTunes gift card. There is NO 'none' option.
I work in a school district and we'd like employees to use their own apple ID for free apps which will allow them the freedom to explore apps without weighing down our tech dept with myriad requests for random apps. I deal with a broad demographic and many users are suspicious of putting personal credit card info on an Internet-based account.
However, it appears they are locked out of the store unless they have some form of payment on file. Even if they enter a gift card, what happens when it's used up? Will they get locked out of the store if they don't have a balance?
Anyone have a work around? If not ... APPLE Please update your support materials to explain this, or fix the bug.
Thanks!

HT2589 how can i create apple id without using credit card details ?

how can i create apple id without using credit card details ?

@Limnos - that doesn't work anymore. There is no NONE option. I've been at it for hours trying to set up my daughter's account. I've tried creating and verifying an appleID on the web, on her touch...everything. Every single time you get to the stupid Touch, it wants to walk you through the verification of the account and it demands payment (even for their suggested apple Remote method listed in the KB).

Can't see ics comments without using a text editor

Similar Messages

Maybe you are looking for