Can't see printer or shares when connected via Internet Sharing

I recently switched from a 2006 to a 2008 Mac Pro. Rather than do a migration I simply took the hard drives from the old machine and put them in the new one.
I then upgraded to Mountain Lion.
I use Internet Sharing to share my Mac Pro's Ethernet connection via wifi, but the other Macs can't see the Mac Pro's printer or shares when connected in this way. They can access the internet. If I connect a machine via the LAN rather than Internet Sharing, the shares and printer are visible.
This worked fine on Lion on the old machine. Any ideas?

Seems that the issue is something to do with connecting via WPA2. When I set Internet Sharing to use WEP (by option-clicking the security menu), I'm then able to see the network shares and the printer.

Similar Messages

  • Since software update, can't see contents of iPod when connected to iTunes

    About 2 days ago, when I connected my iPod to my pc (iTunes), it said there were some software updates for my iPod so I downloaded them and the iPod rebooted itself. Once it came back up, my iPod showed up in iTunes under "devices" on the left hand sidebar. I got the registration page - I usually click register later, but nothing happened this time. It didn't bring me into my iPod. So I tried to Register. I could get so far, then it asked if I wanted some free movie or something, I said NO THANKS, CONTINUE, but nothing happened. I wasn't registered AND I couldn't access my iPod. I can see my iPod under My Computer. I can see "sandra's iPod" uder devices in iTunes. BUT, I can't get to the content when connected to iTunes. All of my stuff is there on the iPod. I can play my iPod when it's not connected to iTunes - but I can't see the content, manipulate playlists, delete songs, etc. when connected to iTunes. I am almost positive this is a result of the latest software updates to the iPod. I have not updated iTunes - I didn't want to and compound the problem. I'm not a techy person - so please be gentle! Thank you. Sandra

    Resolved at home.

  • Accessing Server when only connected via Internet Sharing

    Currently, I don't have the ability to directly connect my Mac Pro which I use as a Server to the router as I have no direct access to it via cable and it does not have an Airport card.
    However, I can access the internet on it if I use internet sharing on my iMac which is connected via Gigabit Ethernet to the Mac Pro at all times.
    In order to use any of the services such as Time Machine from another machine, I always need to connect it directly by cable. This leaves me wondering if there is a way to tunnel the Mac Pro through the iMac so it is accessible via Wifi? Is there a setting on either Machine I have to activate / set to make this work?
    It is only thought to be a temporary solution until I move to a new flat where it will be directly connected to an Airport Extreme.
    Thanks for your help!

    Seems that the issue is something to do with connecting via WPA2. When I set Internet Sharing to use WEP (by option-clicking the security menu), I'm then able to see the network shares and the printer.

  • Who is connected via internet sharing?

    How do you view who is connected to your wifi via internet sharing? I had to get rid of the password in order to get internet sharing to work with my other devices.

    Jimbo:
    One way is to use Network Utility (Applications/Utilities). Click on the Netstat tab then select "Display routing table information." Next click the oval "Netstat" button to run it and down the left column of information you should see the names and MAC addresses of any connected computers.
    K.M.
    PowerBook G4 (15 FW800); 17 iMac G5; Mac mini 1.42   Mac OS X (10.4.5)  

  • I can not see the other end when connecting Skype

    As I connect to Skype ,the other end see and hear me but I cannot see him .

    Frogmanian wrote:
    It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.
    MacBook Air does not run iOS.  It runs OS X (pronounced as in OS - ten).  You can check which version you have by clicking the Apple logo in the upper left of the menu bar, then "About This Mac".  The current version is OS X 10.8.4.  If you do not have that version, you can click "Software Update" just below the "About This Mac" entry under the Apple logo.
    Anyway, typically, the reason for the FaceTime behavior you're describing is a less-than-robust internet WiFi connection.

  • I download tv shows but can only see them in itunes when connected to the internet and periodically all tv shows disappear

    I purchased a tv series and downloaded it (several hours) but i can only play it while connected to the internet, I assume it is somewhere in the cloud. What ever happened to buy it download it and it stays on the hard drive? The other day 8 tv series and 7 movies that i had previously purchaed had disappeared from itunes.

    Hi smonkey123,
    There are several ways you can try syncing your iPod to the music in iTunes on your new computer. They are detailed in this article -
    iOS: Syncing your data with iTunes
    http://support.apple.com/kb/HT1386
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • TS3147 connect OS X 10.9.2 macbook air to windows 7 network and share printer (Brother HL-2230) connected via USB to the same network

    Would like to share printer Brother HL-2230 on windows 7 network.  Using Windows 7  "Homegroup" is not an option.
    The printer (HL-2230) is connected via USB to win 7 computer.  Before I updated OS to 10.9.2  it (Macbook air) had  HL-2230 as one of its' priinters and was able to print.  Now a print request hangs on "Hold for authentication".
    I have already reset printer system and re-installed printer x2 - no luck. 
    I have already connected WiFi Epson XP-200 to the Macbook air - runs fine, no problem.
    thx for any help that can lead to the resolution of this problem.
    ~~~~~~~~~~~~~~~~ _/)~~~~~~~~~~~~~~~~~~~~~~~
    KKAOSS

    Thanks greg,
    I am on the road right now at a Mickey D's. Still another 150 miles to go to get home and back to the scene of the crime LOL
    I appreciate your feed back very sincerely.
    I will respond in AM when I can see - I need to get some java and get back on the road to get home by 1AM.  Take care
    best
    KKAOSS

  • Can't see printer through windowsxp printer hp

    hello. just bought a new imac. i am trying to set up the printer - hp laserjet 3300 - mfp series (usb). I cannot see it through the printer browser setup (more printers ..). All it shows is the windows computer(win1 say). When I choose this win1 name it says "connect to the printer "win1" as: name and password.
    But this isn't the name of the printer!! Bit confused. I didn't have to do anything special to connect the other windows xp machine to the printer (oh actually I had to run the hp cd and let it do the network finding thing- I did that on mac but didn't give me the same network setup options)
    I can see files and connect to the windows maching through the network and I can print from other connected windows xp machines (both xp pro sp2).
    Anyway, I don't expect a response, but if there is anyone out there with similar solved problems,I'd love to hear them
    Thanks
    Martin

    Seems that the issue is something to do with connecting via WPA2. When I set Internet Sharing to use WEP (by option-clicking the security menu), I'm then able to see the network shares and the printer.

  • I can't see my external hard drive connected to my TC

    I can't see my external hard drive connected to my TC, I have connected to the USB port on my TC but cannot see it , any ideas

    Hello Bob,
    I have a powered hub plugged into my Time Capsule.
    Into the powered hub I have a printer; printer works fine.
    Into the powered hub I have an ExFAT formatted disk.
    The ExFAT disk is seen in the AirPort Utility as an "AirPort Disk".
    I cannot see the ExFAT disk in Finder or in Window's "My Computer".
    When I plug the ExFAT drive directly into Mac or Windows computers the drive is seen in Finder and My Computer.
    When the ExFAT drive is plugged directly into Mac or Windows both can read and write files.
    Do you think that I need to format the USB ExFAT drive as FAT 32?
    I have heard mention "need to map the drive". Do you think this would help?
    Thank you for your time.
    Rob

  • E4200 Can't see my network shares after upgrade

    I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
    I did downgraded the firmware back to .01 but still no network .
    Any help ?

    After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
     Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
    After reset, reconfigure the router and then check the connectivity status…

  • Screen Sharing tries to open an afp share when connecting in vnc

    Hi,
    Since the Yosemite upgrade, Screen Sharing App seems to try opening an afp share first when connecting via a vnc:// shortcut... It takes a while before being connected in VNC (2-3 minutes) !
    Remote has been configured via a command line found in an other discussion in this board (Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings? - Page2).
    Connecting via the RealVNC App is super fast (like 5 sec)... Anyone an idea ?
    P.S. configuration was exactly the same in Mavericks and it worked well and fast !
    Regards
    Steve

    I see the following in the Console when trying to connect... Anyone ?
    03/12/14 11:04:17,927 com.apple.xpc.launchd[1]: (com.apple.screensharing[28239]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.screensharing.server
    03/12/14 11:04:18,654 screensharingd[28239]: Authentication: FAILED :: User Name: N/A :: Viewer Address: 186.67.41.117 :: Type: VNC DES
    03/12/14 11:04:26,607 discoveryd[49]: Basic Sockets SetDelegatePID() failed for PID[10599] errno[3] result[-1]
    03/12/14 11:04:34,002 NetAuthSysAgent[28237]: NAHSelectionAcquireCredential The operation couldn’t be completed. (com.apple.NetworkAuthenticationHelper error -1765328228 - acquire_kerberos failed com.apple.idms.appleid.prd.2b6f786c6e6f3742317953525a374e706568656570673d3d@WEL LKNOWN:COM.APPLE.LKDC: -1765328228 - unable to reach any KDC in realm WELLKNOWN:COM.APPLE.LKDC, tried 1 KDC)
    03/12/14 11:05:03,658 EpisodeNode[410]: Episode Node Program Notice: Node::run - Saving state to disk
    03/12/14 11:05:03,658 EpisodeNode[410]: Episode Node Program Notice: Node::run - State saved to disk
    03/12/14 11:05:05,867 NetAuthSysAgent[28237]: NAHSelectionAcquireCredential The operation couldn’t be completed. (com.apple.NetworkAuthenticationHelper error -1765328228 - acquire_kerberos failed sco@WELLKNOWN:COM.APPLE.LKDC: -1765328228 - unable to reach any KDC in realm WELLKNOWN:COM.APPLE.LKDC, tried 1 KDC)
    03/12/14 11:05:06,161 NetAuthSysAgent[28237]: NAHSelectionAcquireCredential The operation couldn’t be completed. (com.apple.NetworkAuthenticationHelper error -1765328228 - acquire_kerberos failed [email protected]: -1765328228 - unable to reach any KDC in realm DYNDNS.ORG, tried 0 KDCs)
    03/12/14 11:05:06,162 NetAuthSysAgent[28237]: NAHSelectionAcquireCredential The operation couldn’t be completed. (com.apple.NetworkAuthenticationHelper error -1765328228 - acquire_kerberos failed sco@LOCAL: -1765328228 - unable to reach any KDC in realm LOCAL, tried 0 KDCs)
    03/12/14 11:05:16,599 discoveryd[49]: Basic Sockets SetDelegatePID() failed for PID[10599] errno[3] result[-1]
    03/12/14 11:05:22,712 discoveryd[49]: Basic Sockets SetDelegatePID() failed for PID[10599] errno[3] result[-1]
    03/12/14 11:05:37,953 NetAuthSysAgent[28237]: NAHSelectionAcquireCredential The operation couldn’t be completed. (com.apple.NetworkAuthenticationHelper error -1765328228 - acquire_kerberos failed sco@WELLKNOWN:COM.APPLE.LKDC: -1765328228 - unable to reach any KDC in realm WELLKNOWN:COM.APPLE.LKDC, tried 1 KDC)
    Thx

  • I can not see the PC I'm connected to over VPN in the MY Network tab.

    Hi, 
    I have set up my incoming connection for my VPN
    on a Windows 8.1 PC.  I can then remotely log in with my Windows 7 laptop. The laptop establishes a connection and says that I have "ipv4 internet access."
    The problem I'm having is that I can’t find the PC in my network. What am I missing? Is Windows 7 not compatible with Windows 8.1 over
    a VPN? I have turned off my Norton's Firewall for a short period of time but this did not change anything. I have altered the IP range allocation for the incoming connection and this has helped to establish a stable connection.
    Any ideas on why I can not see the PC I'm connected to, in the (MY
    Network) tab, would be much appreciated. Thanks

    Hi Steve,
    The main issue is the Windows 8.1 machine is not listed in the Windows 7 machine via VPN ,right ?
    Please check the following settings in the network and sharing center:
    1.Check these settings in the Advanced sharing settings
    “Turn on network discovery” and “turn on file and print sharing”
    2.Ping the destination machine both with the IP address and the UNC to have a check .
    Best regards

  • Where can i get an hdmi driver so i can get sound in my tv when connected to my hp pavilion dv6

    where can i get an hdmi driver so i can get sound in my tv when connected to my hp pavilion dv6

    Hi,
    HDMI sound is actually comes with the video card. DV6 is a reries of dozens if not hundreds of models, which one is yours ? Please use the following steps to check and fix:
    General Instructions for Setting Up HDMI Audio
    Preliminary steps:
    1. Plug the laptop into a power source. Some of the models have a power management scheme that will not allow for HDMI audio while running on batteries. Later, after you get your HDMI audio working, if you find that it still does not work on batteries you can change your power management settings in the Control Panel.
    2. HDMI has its own audio driver separate from the audio system of the computer ( Sigmatel, IDT, or Realtek ) . It is incorporated into the graphics card's driver so make sure you have the newest version of your graphics card driver. On models with Intel graphics the HDMI audio driver will appear in the Device Manager as "Audio Device on High Definition Audio Bus".
    3. Turn off the computer and TV before connecting the HDMI cable. Later, after you get your HDMI audio working, if you disconnect the cable while the computer is running and lose your audio, try closing and then re-opening whichever program you were using that generates audio.
    4. Every time you try a different solution you should reboot the computer. HDMI audio is extremely finicky and seems to usually need a reboot.
    Make the Connection:
    1. Connect the HDMI cable to the computer and TV. If the TV has a "DVI/HDMI" port do not use it. Use a port for HDMI only.
    2. Turn on the TV and select the HDMI port you are using. Adjust the TV settings to receive HDMI audio if any.
    3. Turn on the computer. (Optional, some people close the laptop lid immediately after hitting the power button but I am not sure why. Most people should not need to do this.)
    4. Optional. Some models do better if the TV is set to be the primary display. To set, repeatedly press Fn+F8 (or ctrl+alt+F4) to cycle through the settings (laptop display only/laptop display plus external display/external display only). Reboot the laptop.
    5. Go to Start>Control Panel>Sound>Playback tab. Make "HDMI" the default device. (If "HDMI" is not there, right click in the white area and look under "Show Disconnected Devices" or "Show Disabled Devices" and see if it is there.)
    Post Connection Problems:
    1. If there is still no option to select "HDMI' as the default audio playback device, try re-installing or updating the graphics driver, or even try an older version. The graphics driver is the driver for HDMI audio, not the regular audio driver. A few people with Intel graphics had better results by uninstalling the graphics driver, rebooting, and letting Windows look for a driver (instead of downloading the driver from the Dell support site).
    2. Try disconnecting and then reconnecting the HDMI cable.
    3. If you are using Windows Media Player or Windows Media Center but get no HDMI audio even after it is selected as the default playback device, go to
    Control Panel>Sound>Playback tab>Audio/Playback device>HDMI>properties>Advance>Exclusive Mode and uncheck "exclusive mode".
    4. Try a different HDMI cable.
    5. Try a different HDMI port on the TV.
    Source: Dell forum
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can't see tables after a JDBC connection

    Hi,
    I made a JDBC connection with Progress9.1d database. In the Connections Navigator, I expand the nodes for my database connection and see the following nodes: Synonyms, Tables, Views.
    However, when I try to expand the "Tables" node, I can't see the tables in the Connections Navigator. A window whose title is "Retrieving Objects" appears for a moment, retrieves the objects as shown by a status bar and disappears immediately.
    Can anyone help me?
    Thank you,
    Meltem

    For those of you having similar problems,
    Here is the answer I received from Oracle Support:
    "We use DatabaseMetaData.getTables() to retrive the information from the database, however, I found on a Progress discussion forum that there is a bug in the Progress implementation of getTables().
    The problem is with their implementation of DatabaseMetaData.getTables(). You have to pass a null into the catalog parameter or it will not work. Under 9.1C if you pass in a blank string ("") you get a "Optional feature not implemented" exception, if you pass in a non-blank string you get "The qualifier 'catalog' was larger than SQL_MAX_QUALIFIER_LEN from SQLGetInfo (0)". My understanding is the issue still exists in 9.1D
    Since we don't pass null here, the problem occurs. So, the problem isn't with JDeveloper, but with the Progress Driver."
    Now, I am talking with Progress Support. I will post another message if anything changes.
    Meltem YILDIRIM

  • My Ricoh Aficio MP 2500 only prints postscript stuff when connected to my OS X Yosemite

    My Ricoh Aficio MP 2500 only prints postscript stuff when connected to my OS X Yosemite. When printing one page of something, ten pages or so of machine language will print out.  It is on my home network and the IP address is correct.
    Thanks for any help.

    This can also happen when you use a Postscript driver but the printer does not support Postscript. According to the Ricoh Australia web site the MP2500 supports PCL standard while Postscript is optional. So it would be safe to assume that you don't have the Postscript kit and that's why you are getting all those pages with Postscript commands.
    One thing you can do is remove this printer from Printers & Scanners and add again, this time selecting the Generic PCL Laser printer in the Use menu. Note that this printer is set to 300dpi by default, but you can change the resolution to 600dpi via the printer menu so that you get better looking prints.

Maybe you are looking for