Can't send/ receive photos in mms...?

hi,
i'm hoping this is just a setting i don't know about. when in the messaging screen the camera icon is not next to the messsage box.
it was there a couple of weeks ago.
i've been to the at&t store and the apple store. after messing with the phone they both sent me home to do a restore.
i did a restore to 'as a new phone' and the icon returned, great!
but then i did a restore from back up to get all my info back and the camera icon disappeared again.
i can't just make it as new and start over. i'd rather live without mms photos. but the best solution would be if i can just get that function back.
any suggestions on what to check?
thanks

Is the Camera app also 'missing'? The native Camera app cannot be deleted. But, there are two possibilities:
1) It's turned off in Settings > General > Restrictions. If so, enter your passcode and toggle it back ON.
2) You have an Exchange account on the phone. The Exchange server can be set to disable the camera, so if that's the case you'd need to delete the Exchange account or convince your IT department to remove the restriction.

Similar Messages

  • IPhone can't send/receive photo texts from non-iPhone users

    I've noticed a lot of other people with this same problem and so far nobody has a solution. I've tried resetting my iPhone 4 and was on the phone for an hour with AT&T last night to see if it was a problem on their end as someone else had mentioned. Nope. Basically, I can't receive any photos through text messaging (MMS) and I can't send any photos through text messaging with anyone who doesn't have an iphone. I used to be able to. Not anymore. Doesn't matter if I'm on wi-fi or cellular. I've checked to make sure I've got MMS on. I do. I've reset network settings, we've even switched radio towers to try that. Nothing.
    Can someone help?

    http://support.apple.com/kb/ts2755
    I'm with AT&T IOS 6 and have no issue with MMS.
    if that link doesn't help, call AT&T back and talk to a supervisor, as messaging is carrier related.  Also make sure you have MMS turned on.

  • Can't send multiple photos in MMS

    If I select a photo and choose to send via MMS then tap the camera icon next to the photo on the MMS screen (in order to choose an additional photo to send), the app sends me back to the Home screen. Also tried this on my 3GS running iOS4 and the same thing happens. Anyone else seen this?

    Just tried on iPhone 4, iOS4.1, was able to start sms, tap camera, select image from camera roll, then tap camera again, select another image - both are in the message... repeated until 5 were there, still works.
    Sent. Worked.
    Try powering off the phone (press & hold power until slide to power off shows up, then slide. After it powers off press power button again to boot it up...) and try again. Or, close all open background apps.

  • I can receive emails from three different accounts but can't send a photo. It says the server doesn't allow relaying???

    I can receive emails from three different accounts but can't send a photo from them. It says the server doesn't allow relaying???

    I have a hard time describing this exactly, so I copied this from another thread. This seems to be a recent issue with AOL email accounts on the iPad the past few days. I have two AOL accounts and they work fine. See if this works for you.
    +If you cannot send, under the smtp server your user name and password must be entered even though the prompt tells you it is optional.  As a mobile device the port used is different from the one I would normally use if at home and therefore validation is required by use of the password.  The normal port for the smtp server is 110 but to use on a mobile unit like the iPad port 587 is used.+
    The big thing is to make sure that your username and password are filled in - Select your email account in the Mail setting and tap on the arrow next to the smtp server under the Outgoing Mail Server and then tap on the arrow next to smtp server under the Primary Server and fill in the information in there.
    Some times you have to resort to deleting the account and starting over again.

  • Xperia Z1 can not send/receive MMS after Lollipop update

    Xperia Z1 can not send/receive MMS after Lollipop update, is anyone else having this issue. Any ideas on what I can do to restore MMS?

    MMS need a data plan, there are certain carriers/networks that allow MMS to be sent w/o a data plan to their branded/locked phones, you will have to contact your carrier/network regarding this.
    Is your phone braded or was it branded? did you flashed lollipop ? 
    @KMcFarlane
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • IPhones  Can't send/receive pictures from other phone like Galaxy

      I Can't send/receive pictures from/to my iphone from other phones like Galaxy, but I can send and receive text messages. I appreciate if someone can help me.

    Is MMS enabled in your mobile phone tariff (check with your network provider) and is your phone configured with the correct MMS settings for your tariff?

  • How can I send multiple photos in an email?

    How can I send multiple photos in an email?

    In Photos, when looking at your pictures, click the Action arrow first (upper right), before selecting any pictures.  Then you can tap select the pictures you want to send then click "Share" in the upper left.  From there you can Email.
    If you click and open one picture first, the Action button will only allow you to share that one picture.
    (Yeah, took me a while to figure this out. )
    ivan

  • HT4061 I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    http://support.apple.com/kb/TS5185

  • How can I send a MIDP through MMS??

    Hi there,
    I need to know how can I send a JAR through MMS,
    I'm not talking about WMA API..... please, understand that I don't
    want do send a MMS through JAVA or J2ME or MIDP.
    I want to send my compiled midp in a JAR, in a MMS.

    https://itunes.apple.com/us/app/id314894105?mt=8
    https://itunes.apple.com/us/app/id306273816?mt=8
    They have some limitations though. They have paid versions that remove those limitations

  • Can I send a photo to adobe

    Can I send a photo to adobe or acrobat?

    I don't know about anyone else, but I don't understand the question.

  • Why is my texting using data? When I have data turned off I can't send/receive. Texting is "unlimited" but it's using up all my data- help!

    Why is my texting using data? When I have data turned off I can't send/receive. Texting is "unlimited" but it's using up all my data- help!

    Texting longer text messages or any media (pictures/video/sound etc) being sent requires data to be active. However, it does not count against your data caps.
    Since you have an iPhone, you must also be aware of the difference between iMessage and SMS Text messages. The iPhone, by default, will send an iMessage when sending another text message to anyone else with an iPhone, iTouch, or iPad. This does use your data if you are not connected to wifi. In Settings, you can turn iMessage off, and then all of your texts will go through Verizon.
    Also understand- iMessage will use wifi when connected to wifi, but would need cellular data connection to work when not connected to wifi. Regular SMS text messages that are long or any media will always use the cellular data and not wifi, so will not send if cellular data is turned off, even if on wifi. However, this does not count against your cap.

  • HT4061 I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

    I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I can't send out photos using I message on my iPad 3

    Can't send out photos using I massage on my ipad3 with ios6

    It depends on the type of e mail service you have.  If you have a pop account you cannot create new folders.   If you have an imap account, you can.  As an example, comcast.net are pop accounts.   Gmail.com  addresses are imap accounts and you can set up folders.
    If you are not sure what you have, put the pad in landscape and in the left side, touch the account button for your service.   You should see inbox, draft, delete and trash.  Look at the top.  If there is an edit button, touch it and you can add folders.  If the edit button is not there, you have a pop account and cannot add folders.

  • TS3803 I can not send a photo in a message

    I can not send a photo in a message

    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

  • I can't send/receive any message/call but I can connect to the internet. What's wrong?

    I can't send/receive any message/call but I can connect to the internet. What's wrong?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • Hi all - is it really possible to use one license for two computers or is it just a rumor?

    I heard that it would be possible that you can use one license for two computers. Is that the truth? And if so - how does it work? Thanks K

  • IWeb link to iPhoto doesn't work for me...

    Help! When I select the Media button from iWeb and then choose photo, although my iPhoto folders appear, nothing happens when I click on the folders themselves. Therefore I cannot add any photos to iWeb. Appreciate that there may be a work around for

  • Restoring Rman backup on New Host with different directory structure

    Hi, I have a following scenario to clone the database. 1. clone the database on new server 2. source is non - ASM and target is ASM 3. On source incremental level 0 backup taken on disk connecting to catalog, the backup is moved to target host to dif

  • Schedule plan - Stored procedure

    Hi Experts, I have a requirement like below....Any ideas to achieve the same will be highly appreciated... PLAN Stored Procedure to run on 3rd, 9th, 16th & 23rd every month On 3rd : delete data from [ControlReports] tbl for previous month and insert

  • Hide/Unhide Column in WAD via Button

    Hi, I would like to create a Button in WAD that hides or unhides a certain column (key figure) from a DP in the WebReport. What is the INSTRUCTION to Hide/Unhide a column? Thanks for your help!