Can't set default java for Mozilla in java control panel

OK. It was fine before installation of SE 6u5. Now Sun java works ok in IE7 but not in Firefox 2.0.0.8. THe problem is obviously in the java control panel that sun java is set as default java for MS IE, but not Mozilla. Here is my question:
I used to be able to tick BOTH IE and Mozilla. But now, when I tick Mozilla, it accepts but after I click yes to close the control panel and open it again, the tick i just made disappears. (So, it means not accepted as a default java) I did make new installation of Firefox for other reasons. Could it be that something has been messed up by both installations. I have tried to remove the deployment.properties and install JRE 1.6.0_5 again while Firefox is already there, but in vein. Thre is another problem that may be related. I can't use the installer downloaded from the internet. I have to use the installer available in the Documents and Settings\administrator\application data\sun\java\jre1.6.0_05 to install jre1.6.0_5.
Environment: Windows XP pro SP2 with up-to-date Windows updates. Sun java installed: JRE 1.4.2_17, JRE1.6.0_5, and JDK 1.5.0_15.
I need help to know what can I do to make sun java woking with my Firefox again.... Another question: can i uninstall the JRE 1.4.2_17 since I have now JRE 1.6.0_5?
Thanks in anticipation.

You cannot set a default value for this attribute, because by default Identity Sync sets useraccountcontrol to 512.
You can find this default value in the configuration registry (under the ou=services tree on your configuration directory server) and change it to 514. Make sure you restart the Identity Sync services after you update the value.
Bertold

Similar Messages

  • How can I set default values for Allocate Mode in AO config?

    Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
    Solved!
    Go to Solution.
    Attachments:
    generateWaveformFIFO.vi ‏15 KB

    Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
    Misha

  • Can you set default values for person/group picker fields? To current user?

    Two-part question/issue . . .
    Part 1:
    In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties.  There doesn't appear to be any equivalent for
    the Person/Group Picker field type in Properties.  I'd like to set a default person for a few fields in a form I've created.  Is this possible?
    Part 2:
    The default user I want to set for one of those Person/Group fields is the "current user."  I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
    automatically populate this particular user.  Is this possible?

    Hi Stephen,
    You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
    First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
    http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
    Secondly you can use JQuery and SPServices ,
    $().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
    list and auto populate it with getting the current user Name from User Profile here is the scripts
    <script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
    <script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
    <script language="javascript" type="text/javascript">
    $(document).ready(function() {
      var userCurrentName = $().SPServices.SPGetCurrentUser({
        fieldName: "CurrentUser"
      $("input[Title='CurrentUser']").val(userCurrentName);
      var userPhone = $().SPServices.SPGetCurrentUser({
        fieldName: "WorkPhone"
      $("input[Title='Phone']").val(userPhone);
    </script>
    Krishana Kumar http://www.mosstechnet-kk.com

  • How can I set default copies for specific report?

    I'm trying to set a default of one copy on a specific concurrent request. In this particular case, the NACHA request that produces the NACHA magnetic file. I have a dummy custom printer driver, style, etc. setup and attached to the NACHA concurrent program so that when it executes (as long as the user remembers to put 1 in the Copies field on the concurrent request screen) it will execute the Unix shell script (it grabs the file and FTP's it somewhere).
    The problem is, if the user forgets to put 1 in Copies, the Unix shell script won't execute. I'd like to make it so this one request comes up with a default of 1 in Copies. The only way I know of to set copies is in the site profile, application profile (like HR, AP, etc.) or user profile. I really don't want any of these because then the default will be set for all reports within those respective profiles. I was hoping there was a way to set the number of copies in the printer control file, but thus far I can't find any current documentation that shows the syntax of the available commands for the printer control file. Found something on the Internet, but it looked like it was for Oracle 7, perhaps. We're on 11i. On that page, I saw nothing about setting copies, so I don't know if it was just missed, isn't possible or is possible in the new version.

    Looks like I may have found my answer.
    Create a report set
    Add the concurrent program to the report set
    set copies in the options zone of the report set to 1
    Run the report set instead of the concurrent program itself and the copies will always be defaulted to 1.

  • Can I set default colors for generated shapes in Premiere Pro CC?

    I'm working on some highlight video where I need to generate an ellipse on each clip to highlight a player. I'd like to use a yellow/yellow, 20% softness, 8 thickness ellipse each time, but by default PP gives me an ugly green/blue combination, and I have to change the inside/outside colors, softness and thickness each time I add a clip and generate an ellipse.
    Is there a way to set a default inner/outer color, thickness, and softness setting for each new generated shape so that I don't have to keep repeating these steps?

    If you are using the Title Designer to generate your ellipse, and if I understand what you want, the answer is yes.
    Unless I am completely off-base, your default font style below the title has the colors of that ugly green/blue combo.
    You can easily just set the ellipse the exact way you want it, and then go into the Font Styles menu and create a new font style. Give it a unique name like "Ellipse" and then drag that new style from the end up to the beginning of the list. (Upper left hand corner).
    I created an ellipse using a greenish yellow, rather unattractive color for both the shape and the stroke. I used a higher opacity because it shows up better in the screen shot, but I could have set it for 20% easily enough. I then went to the styles menu, created a new style, gave it a name, then went to the last style and dragged it up to the top left where you see it now. You have to look close.
    It is not particularly obvious that the shapes are based on the font style just as much as the text is.

  • Can't Set Default Value for LOV Presentation DB Column

    I have a simple form. One of the fields is populated using a named, dynamic LOV with the following source query:
    SELECT USER_NAME DISPLAY_VALUE, USER_ID RETURN_VALUE
    FROM USER_ACCT
    ORDER BY 1
    I want the default user to be public, which is one of the possible values returned by the above query. However, I just can't find a good way to do this.
    If I put the following query in the Default section, nothing happens.
    SELECT USER_ID
    FROM USER_ACCT
    WHERE USER_NAME = 'PUBLIC'
    If I look up the ID and statically put the value in the Default, it works (This isn't acceptable . From environment to environment the value will differ)
    If I put the SQL in an after footer page process, it sets the value correctly in the session but, does not update the display.
    If I try to put it in the Post Calculation Computation section, it merely produces an error.
    I'm sure that I am missing something simple but, I have not spent an hour and half on this.
    Someone please help!
    -Joe

    A function I'd like to see is the ability to not only create a select list dynamically, but also set the default value of that select list's item to the first (or Nth?) value on that list. This could be specified in the builder by an item option.
    E.G., if a select list LOV returns three values: "foo", "bar", "baz", go ahead and set the value of the select list item to "foo".
    As far as I've been able to discover, there's no built-in way to do this in Application Express. I've looked through the app, the docs, and the forum. If such a method does exist, please let me know.
    Otherwise, we end up running additional processes that reissue the query so we can grab the first item as the default value. This seems inefficient to me.
    Keeping the LOV query and the "first item" query consistent can present problems as well. We usually end up pushing the LOV query into a function so it can be maintained in a single location, but this seems more like a workaround than anything else.
    While the query is probably cached, Application Express has that return value already, right? Why calculate/choose it again?

  • Is there a way to create a new user template so I don't I have to set each policy for new users in control panel?

    hi,
    I want conferencing, mobility, remote access, etc., to be automatically set to a defined policy so when I create a user, I don't have to go down the list to change the default from automatic to my custom policy.  I don't want to edit the global
    polices.
    thanks,
    rudif

    Agree with Georg, you can do that using Powershell
    To assign policy using Powershell, you can refer below link
    http://blogs.technet.com/b/csps/archive/2010/06/06/refpolicies.aspx
    https://blogs.technet.com/b/csps/archive/2011/07/13/agmanagingusers.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Extending flash: how do I set default values for filenames

    Hi,
    I am trying to set default values for filenames
    <choosefile> and <popupslider>s that will show up when
    my XMLpanel first loads in my jsfl extension file. It seems that I
    can only set default values for textbox items.
    How do I do this for filenames and popups?
    As a workaround, I also tried using a flash object dialog box
    to look like a <choosefile>, or any jsfl command, but then
    how do I return those values back to the XMLpanel that calls them.
    and pass the data back to my jsfl script.
    lemme know if you know a way,

    Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
    Misha

  • In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

    Adobe Acrobat 9 Pro V9.4.0
    Win7 Pro x64
    Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
    Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
    Thanks in advance.

    See my response to this post

  • Is there any way we can set default value for a Date Attribute to current date in Master Data Services

    Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
    I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
    Thanks.

    Hi Anagha,
    So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
    1. Add buisness rule which can set a default value when Date = NULL/Blank
    2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
    3.Go to that table and add a after update trigger like
    if uda_<entityid>_<attributeid(Date attribute)> = default value
    update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
    I will check on this too from my side.
    By the way AFAIK i dont think so calendar control integration is possible .

  • How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

    How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

    When you use the Canon driver, the 2 sided printing is set in a different location. There is an entire menu dedicated to it (at least on my mx892). The printer dialog box has a menu selector in the middle of the screen (I think it says "layout" by default). If you click on it, you will see the duplexing options at the bottom. Much more flexibility than the single checkbox available with "airprint". The interface is unusual (at least for me) but you can pre-set up many different configurations (Fast Duplex, Fine Single-sided, B&W, Photo, etc etc.)

  • How can i set a path for my deployment files in weblogic server 10.3

    Hi
    How can i set the path for my WAR ,JAR files while deploying.i am using the wls10.3 version.
    is there any scripts for this ,please provide me.
    my Application is ADF 11g application.

    By "path", I assume you mean "classpath".
    The simplest way is simply to include the jars you need inside the web application or web module's WEB-INF/lib directory, EJB module's META-INF/lib directory, or EAR lib directory.
    If that's not practical, if you use NodeManager to start your servers, you can go to the "Server Start" tab in the server definition in the WebLogic console and edit the "Classpath" field, which defaults to no value. You can specify a classpath value there. Note that if you specify a value there, it REPLACES the default classpath for the server, it doesn't add to it. If you need to just add to it (a much more likely scenario), if the value references the value "$CLASSPATH" in it, that will reference the original classpath value that the server would have had.
    So, for instance, if you wanted to include the MQ jars in the server classpath, you could set a value like this:
    /usr/java/mq/lib/mq.jar:/usr/java/mq/lib/mqstuff.jar:$CLASSPATH

  • How to Set default value for taxonomywebtagging control with terms and nested terms

    Hi,
    I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
    Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
    Any help would be greatly apprecited.
    Control code in aspx page:
    <td>
    <asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
    </td>
    <td>
    <Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
    //Set the Business Unit Field
    SPSite site = SPContext.Current.Web.Site;
    TermStore termStore = session.TermStores["Managed Metadata Service"];
    Group group = termStore.Groups["GROUPName"];
    TermSet termSet = group.TermSets["TERMSETNAME"];
    Term term = termSet.Terms["TermA"];
    Guid termGuid = term.Id;
    term.SspId.Add(termStore.Id);
    term.TermSetId.Add(termSet.Id);
    term.AllowFillIn = true;
    term.AnchorId = countryGuid;
    term.IsMulti = true;
    Thank you.
    AA.

    Hi,
    According to your description, you want to set default value for TaxonomyWebTaggingControl.
    I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
    Here is the code snippet:
    TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
    SPSite site = SPContext.Current.Web.Site;
    TermStore termStore = session.TermStores["Managed Metadata Service"];
    Group group = termStore.Groups["GroupA"];
    TermSet termSet = group.TermSets["A"];
    Term term = termSet.Terms["A1"];
    TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
    TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
    TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
    TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
    TaxonomyWebTaggingControl1.AllowFillIn = true;
    TaxonomyWebTaggingControl1.IsAddTerms = true;
    TaxonomyWebTaggingControl1.IsMulti = false;
    TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
    Here is a detailed article for your reference:
    http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
    Feel free to Reply the test result.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

  • How to set default values for boolean columns

    I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
    I've tried to set default value at column level:
    <Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
    Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
    <Default>TRUE</Default>
    </Field>
    and at content type level:
    <FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
    But in any case, when i create a new item with this content type, default value is applied.
    Can anyone tell how to set default values for boolean columns?
    Thanks in advance,
    Regards,
    Sergio

    In the field definition you can set
    <Default>1</Default>
    or
    <Default>0</Default>
    How to set the default value Null?

  • How can i set a layout for MIGO screen

    Hello all,
    How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

    Hi
    First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
    Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
    After creating the variant tick the check box use as standard setting below the variant
    Hope it helps
    Edited by: Girish  Adaviswamy on Mar 3, 2010 1:27 PM

Maybe you are looking for