Can't set Message to use SMS ON IPad
New iPad Air2. Can send Messages via iMessage. Can't sent Message to non-Apple users. There is no selection to "use SMS" in the Message Prefernces in Settings. Normally I leave Cellular service off on this device, but Imtried it with this off and on an see no difference.
IIf you do have an iPhone, this might be of some interest to you.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
IF you don't have an iPhone, there is no way to send SMS messages on the iPad as jazcan explained to you. The iOS messages app is an iOS/Mac app only and it works over WiFi, so having cellular data turned on has no bearing on it any way. There is no way that you can text with Android phones with the Messages app without using the iPhone as the conduit.
Similar Messages
-
Can we set output formats(used in billing) at the time of project creation
hi ,
Can we set output formats(used in billing) at the time of project creation (Project system)
Output formats- like e billing format etc.
ThanksHi
No .WE CANT -
U can hide the message by using #EC! Wht does it mean?
Hi Experts,
When am doing Extended Prog. check, am getting,
1- <i><b>U can hide the message by using #EC!</b></i>
Wht does it mean?
2 - <i><b>No read access to field my_field!</b></i>
Wht does it mean?
thanq.Hello,
This is error is gave by Tcode SLIN,
Now in ur case the ur_field is not used any where in the report except the declaration line.
So this error is give by SAP.
In order to hide thiw warnigng u can use the word " # EC NEEDED.-
This is will hide the warning.
But my suggestion is remove the field from declarion.
Regards,
Vasanth -
I lost my apple tv remote. How can I set up the use of my iphone remote app without it?
The remote app would require home sharing to be enabled and both to be on the same network. If that's not the case then you will need a new remote
-
How can I set up group contacts on my IPad Air?
HOw can I set up group contacts on my IPad Air?
I Don't know if you can or not.
but you could try one if these 2 things:
-under a new contact in name type the names of the people. Next, I'm not sure if this will work, but for phone just put a different hone down.
-Also tou could just make a group message. In messages just type all the names in the to field after you tap compose. -
Can I receive messages from Skype when my ipad is in sleep mode and the app is closed?
Ok, can I receive messages from Skype when my ipad and iPod touch are off, and the app is closed? Becuase my mom sent me a message and I did nott receive it. I have to have the app running or running in the background to receive messages. Is there a way to recieve messages when my ipad and ipod do NOT have the app running?
The ipad may keep a connection alive in sleep mode.. but it should only use local connection AFAIK, and no internet content.
I have a similar setup with iPad and although it has an IP it is not actually reachable on the network. I will track usage and see if it is actually using anything but I would doubt it.
Now of course it may depend on what apps you have running. I really doubt the ipad will be using that much of your download unless you are watching movies on it. -
Can I set up 2 IDs on one iPad?
Can I set up 2 IDs on one iPad so we can both keep track of stats on games. If so, how do we do it?
Unable to setup more than one Apple ID with Game Center without having to log out/in all the time.
-
Can all ipod apps be used on the ipad?
Can all ipod apps be used on the ipad?
Any apps in the app store that are 'universal', as in works on both large and small screens have a + by the download button.
Many Touch apps (also iPhone apps) do work on the iPad, but they're tiny, taking up the middle of the screen. You can make them fit the screen, but their appearance varies. Some are high enough resolution that they look okay, others are blurry. -
TS1398 I can't set up wifi on my new ipad.
I can't set up wifi on my new ipad. It won't connect to the network. Wifi is working on other devices in the house.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
HT1665 Can iPhone car charger be used for latest iPad?
Can iPhone car charger be used for new iPad?
Probably not. The iPhone charger is 5W whereas the iPad requires a 10W charger. The iPhone car charger will probable charge the iPad, but very slowly.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Can I set an Audio Alarm in my IPad? If the answer is yes, then how do I do that?
Can I set an Audio Alarm in my IPad? If the answer is yes, then how do I do that?
Put an appointment on your calendar and set it with audible alarm.
THere are also apps, I have one called Alarmed, and you can set an alarm, for example to wake you up. Not sure how it works if you've closed the app though. -
How can i set Messages to auto answer video chats?
I used to be able to have iMessages and iChat auto-answer incoming video chat/calls. I use this to communicate with staff who may not be able to quickly accept the incoming event.
Hi,
The AppleScript for this is still there.
It can be set in Messages Menu > Preference > General Section in the bottom drop down.
The Sound/alerts pane has gone in Mavericks and sound can now only be changed for "Messages Received".
Although I must admit to not trying it I have presumed the AppleScript would then only work for Text Invites.
Having said that the AppleScript should be able to run as a separate even like an App from the Dock.
The Drop Down in Messages has an Option to Show In Finder effectively.
9:47 pm Saturday; January 11, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Hi folks. I cant' get my router to have DHCP tell my PCs that the router should be the DNS server instead of the external servers it is using. I am using Comcast Cable internet. It sets the external DNS servers for every PC that connects to it and I have problems finding my PCs on my network by NetBIOS name because the external DNS servers obviously don't store my local PCs. How can I set the router up to set DHCP to use the router for DNS?
If you cannot set the DNS server in the configuration page for the DHCP server in your router then your router does not support this.
This won't solve your problem though. The DNS server on the router is a simply forwarder. It simply forwards the DNS requests from your computer to the ISP's DNS servers. The DNS server does not accept dynamic updates to a private zone inside your LAN. And DNS is pretty much unrelated to the standard windows workgroup browsing which does the actual name resolution inside your LAN. That name resolution even works without a router inside your network. Basically all windows computers in your network periodically broadcast their name to the network. One windows computers is elected "master browser" which collects all these names and provides the name resolution service for all computers in the workgroup.
If this does not work it is most likely a windows configuration problem. It could be a software firewall on the computers which blocks traffic. It could be that the computers are not setup for file/printer sharing and thus have the computer browser disabled. It could be that your computers have a WINS server configured which does not exist. There are probably more causes. The better source to ask this question would probably a Microsoft support group. They deal with these kinds of issues more often and maybe a MVP may be able to point you into the right direction or give some links to step-by-step instructions... -
"Saved Result Sets" message when using the raplace wizard in the Admin Tool
Hi,
I'm just trying to replace an existing Essbase source with a new one in my Business Model using the replace wizard. )It's a cube with > 1.5k account members so I'm really not looking forward to doing that manually).
So far all migrations have worked fine, but somehow this time after specifying which tables to use for the replace, instead of showing me a list of columns which will be changed, the wizard throws a "Saved Result Sets" message and just hangs. Every time I hit "Finish" the message appears again.
Here's a screenshot .
Anyone ever came across this?
PS: what's up with the links these days? Jive acting up again?
Edited by: Christian Berg on Feb 10, 2010 2:57 PMUpdate: looks like the wizard is really overwhelmed with big cubes (1.5k accounts, 20 dims @ approx 10 generations each) and just breaks.
I haven't figured out the exact limit, but I'm able to migrate pack of about 8 dims at a time as long as I leave the accounts dim out and do that on itself.
Cheers,
C. -
HT4352 Lost my remote. Can I still set up? Using iPhone or iPad?
The remote control is missing and I would like to set up home sharing. Do you have to have the remote or can you use iPhone or iPad?
You need the Remote unless the iDevices are already configured for the unit.
Sounds odd that you should have lost the Remote without even setting up the basics.
Maybe you are looking for
-
Error when invoking webservice on https (unable to find valid certification
I have a webservice which run on https.. When I made a simple test (jsp) page on my local computer all works fine (jdeveloper 10g) .. When I deploy the ear file to remote oc4j and run the test page I get the error: javax.net.ssl.SSLHandshakeException
-
Ipod error message when updating songs
I am reoccurantly having the same problem when trying to update my ipod mini. It displays the message : ERROR THIS FILE CANNOT BE READ FROM OR TO. I would be very grateful if anyone can help me sort out this problem Thanks toshiba Windows XP
-
RAW Images not displayed properly
If I send an email to my mum from my iPad3 and she views it on her iPad2 she can see every photo perfectly. However if she looks at the same email on the iMac using Entourage she can't see every photo. As often as not she gets the following error "co
-
I have accidentally deleted a Numbers spreadsheet. Is there any way to recover it?
I have accidentally deleted a Numbers spreadsheet. Is there any way to recover it?
-
Never showing my file and folder in desktop also..
never showing my file and folder in desktop and hardisk also....how to fix that....