Can't start server -- Fatal error: Cannot connect to user group ldap server
After installing iCS 2.1, iCS 2.1p1, and iCS 2.1p3, a user will receive the
following error message when trying to start the server:
<P>
Fatal error: Cannot connect to user group ldap server.
<P>
In addition, the Directory Server access logs will contain the following
entry:
<P>
-0400] conn=125 op=1 SRCH base="dc=ldgw-llc,dc=com" scope=2
filter="(objectclass=People)"
In the server.conf file,
check the local.enduseradmindn
parameter. The parameter
should appear as follows:
<P>
uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
<P>
If the parameter contains
"calmaster" or any user
other than "admin,"
change it to match the line above.
Hi,
I am getting the same error, kindly let me know how did you solved this problem
Thanks
Ahmad
Similar Messages
-
Fatal error 78: Cannot connect to User Group LDAP Server
After configuring Calendar server when trying to start:
give following error:
# ./start-cal
Restarting calendar services
Stopping all calendar services
Starting all calendar services
# enpd is started
csnotifyd is started
csadmind is started
Fatal error 78: Cannot connect to User Group LDAP Server
cshttpd is not started
Calendar service(s) not started
cshttpd is not started
Calendar service(s) not started
Following logs are from http logs of calendar server
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Information: Log created (1095109367)
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: Sun Java System Calendar Server 6 2004Q2 (built Apr 28 2004) cshttpd starting up
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd attempting to open Counters Database
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd successfully opened the Counters Database
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module is refreshing
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshing
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshed
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module has refreshed
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd: argc=3 argv[0]=/opt/SUNWics5/cal/lib/cshttpd
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: attempting to open session database for cshttpd
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: session database open completed for cshttpd
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: Store Critical: Error checking session database: DB->set_alloc: method not permitted in shared environment
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: LdapCacheInit: Ldap Cache not enabled.
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd_parse_commandline: successfully bind process 17916 to processor 0
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Critical: Fatal error 78: Cannot connect to User Group LDAP Server
Have any body seen this before.
RegardsThe server was running fine for few months until i restarted the calendar server. i started to see the same error and the problem was the machine name got changed at some point.
I added the old hostname to the /etc/hosts file and restarted the calender server and it started to work fine. -
Can't Start J2EE Engine Error: Cannot attach to the Messenger
Hi ALL,
I can't make the java start.
follow the logs
jcontrol.log
[Thr 01] INFO: Invalid property value [Debbugable=yes]
[Thr 01] [Node: SDM] java home is set by profile parameter
#Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BWH/SYS/exe/run/jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : /usr/java14_64
-> java parameters :
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 256M
-> root path : /usr/sap/BWH/DVEBMGS23/SDM/program
-> class path : /usr/sap/BWH/DVEBMGS23/SDM/program/bin/SDM.jar
-> OS libs path : /usr/sap/BWH/DVEBMGS23/j2ee/os_libs
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BWH/SYS/exe/run/jstartup.jar:/usr/sap/BWH/SYS/exe/run/jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=/usr/sap/BWH/DVEBMGS23/SDM/program
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 01] ***LOG Q0I=> NiPConnect2: connect (79: Connection refused) [nixxi.cpp 2770]
[Thr 01] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 12
(SI_ECONN_REFUSE/79; I4; ST; 10.196.203.96:3953) [nixxi.cpp 2770]
[Thr 01] *** ERROR => MsIAttachEx: NiBufConnect to mz4e/3953 failed (rc=NIECONN_REFUSED) [msxxi_mt.c 652]
[Thr 01] *** WARNING => Can't attach to message server (mz4e/3953) [rc = -100]-> reconnect [jcntrms_mt.c 368]
[Thr 01] Thu Jan 17 14:48:48 2008
[Thr 01] ***LOG Q0I=> NiPConnect2: connect (79: Connection refused) [nixxi.cpp 2770]
[Thr 01] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 12
(SI_ECONN_REFUSE/79; I4; ST; 10.196.203.96:3953) [nixxi.cpp 2770]
[Thr 01] *** ERROR => MsIAttachEx: NiBufConnect to mz4e/3953 failed (rc=NIECONN_REFUSED) [msxxi_mt.c 652]
[Thr 01] *** WARNING => Can't attach to message server (mz4e/3953) [rc = -100]-> reconnect [jcntrms_mt.c 368]
[Thr 01] Thu Jan 17 14:48:53 2008
[Thr 01] ***LOG Q0I=> NiPConnect2: connect (79: Connection refused) [nixxi.cpp 2770]
[Thr 01] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 12
(SI_ECONN_REFUSE/79; I4; ST; 10.196.203.96:3953) [nixxi.cpp 2770]
[Thr 01] *** ERROR => MsIAttachEx: NiBufConnect to mz4e/3953 failed (rc=NIECONN_REFUSED) [msxxi_mt.c 652]
[Thr 01] *** WARNING => Can't attach to message server (mz4e/3953) [rc = -100]-> reconnect [jcntrms_mt.c 368]
[Thr 01] Thu Jan 17 14:48:58 2008
disp
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jan 17 14:48:27 2008
J2EE server info
start = TRUE
state = STARTED
pid = 901340
argv[0] = /usr/sap/BWH/SYS/exe/run/jcontrol
argv[1] = jcontrol
argv[2] = pf=/usr/sap/BWH/SYS/profile/BWH_DVEBMGS23_calsaps011
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64980
argv[5] = -DSAPSYSTEM=23
argv[6] = -DSAPSYSTEMNAME=BWH
argv[7] = -DSAPMYNAME=calsaps011_BWH_23
argv[8] = -DSAPPROFILE=/usr/sap/BWH/SYS/profile/BWH_DVEBMGS23_calsaps011
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jan 17 14:49:48 2008
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=901340)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jan 17 14:50:07 2008
DpEnvCheckJ2ee: switch off j2ee start flag
I have the DEV enviroment working but this QAS doesn't.
Could someone help me?
Regards,
NiviaHi Nivia
Check for Java schema user (Default SAPSR3DB) in dba_users table if the account is open or not? It should be open.
If yes check the JAVA users "J2EE_ADMIN", "J2EE_GUEST" and "SAPJSF" in usr02. They should be open.
Try it again and if again fail thry to send the current Java log.
Best Wishes.
Kumar -
Please help. i upgraded to IOS6 few days ago and after that I cannot access the application store.
Try this:
1. Go to Settings>General>Date and Time>Set Automatically>Off
2. Set the date ahead by a few months
3. You should then be able to connect to the store -
Logon balancing error:cannot connect to message server (rc=9)
Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
VikramCheck OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
Error: service 'sap...' unknown
Component NI (network interface), ...
rc = -3, module ninti.c, line 463
Detail NiPGetServByName: service 'sap...' not found
System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
%SystemRoot%\system32\drivers\etc
is not translated to
c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger. -
Error : Cannot connect to the server temporarily
Hi,
A particular PC is giving an error " cannot connect to the server temporarily", the user is able to login on another PC and no one is able to login to lync 2010 ( internal user ) on this particular PC.
Options tried:
1) Deleted sip folder under app data.
2) Uninstall and reinstall Lync client.
3) checked timezone and srv records.
4) checked ping to FE and director server.
) checked manually adding FE on lync client.
Your inputs/suggestions would of great help.
Thanks.Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support -
Error: Cannot connect to SFTP server ; channel is not opened
Hi PI Gurus,
Sender SFTP CC is getting error:
Error: Cannot connect to SFTP server. channel is not opened. (Software version: 3.0.23)
Can anyone guide me, what this error means 'channel is not opened'
Is the issue is at SFTP server location?
Regards,
Krishna ChauhanHi,
Now the error has changed:
Session.connect: java.net.SocketTimeoutException: Read timed out
I have increased the pooling interval to 1 Hr from 1 Min. Waiting for the next pooling interval result.
Guide me if I am heading right.... or anything else needs to be done.
Regards,
Krishna Chauhan -
Error: Cannot connect to fulfillment server. Error: cannot find loan record. Definitely connected to internet, authorization correct, etc. Not sure what else to look at.
Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support -
Connection Error, cannot connect to game server
I Just updated to iOS 8.1. When I tried to play WordRoll I got an error message, Connection Error, Cannot connect to game server.
ave researched some answers and have tried several, log out then soft reset, delete app and reinstall, reset wireless, nothing seems to work.I'm not sure. Prior to last Wendesday our net connection was fine, but from Wednesday evening it's been decidedly flakey during the evenings
Oh & I'm using a HH2 & am on Total Broadband option 3. I've also tried the Leatrix Latency Fix (several months ago) & have turned off the router for several mins (on Thursday evening). I've been able to connect again to the servers this morning (as I did yesterday morning). Here's the pathping (sorry for it being an image, I can't work out how to copy & paste from the dos box & don't really want to copy it out), my HH's saying I'm getting 7,616kps down & 448 kps up, Speedtest.net's saying 6.34Mb/s down & 0.38Mb/s up (now). -
Error : Cannot connect to the LDAP server
I have exported a file called "test1.ldif"
and then import in a new Oracle ldap server using the command:
ldapadd -p 389 -D cn="directory manager" -w <password> -f test1.ldif
But there is error "Cannot connect to the LDAP server".
Actually, I'm migrating the ldap data from 1 machine to another, please advise. ThanksCheck your ldap port, by default it is 4032...
--Bill -
Error cannot connect to server or DNS name when working with the SRDemo
I receive the error cannot connect to server or Dns name when trying to
display the SRlist.jspx page in the SRDemo. I am using the embedded OC4J server . I tried to using the debugger to trouble shoot the problem but I did not get any information that was useful. The url I am using is http://localhost:8989/SRDemo-UserInterface-context-root/faces/app/SRlist.jspx I also tried using the IP address that didn't work . I really need to get through this demo.What about using:
http://127.0.0.1:8989/SRDemo-UserInterface-context-root/faces/app/SRlist.jspx
Or disabling any proxy settings your browser might have? -
" ERROR cannot connect to server. please try again later" for games
my phone keeps coming up with the phrase " ERROR cannot connect to server. please try again later" for games but some of my games are working and game centre loads . what's the deal?? how do you fix it ?
for the amount of money I pay a month (£80) you'd expect it to work.... afterall it is apparently a "smart" phoneThanks for the reply. Tried that of course before going to the effort of posting something here.
Cheers
G -
Error: Cannot connect to NTP server or NTP server is not running - Cisco IPS
This is different scenario here:
I have two Cisco IPS 4260-k9 and both are in production now.
One of the IPSs is configured with NTP and works fines, but another one is not.
When tried to configure when the device is ON and live in production and got the following error,
Error from CLI:
" Error: Cannot connect to NTP server or NTP server is not running "
Error from IME:
" Delivery failed.
err Unaccepable Value - cannot connect to the NTP server or NTP server is not running"
I am able to reach the NTP server, also the same NTP is working fine with other devices....
Am I doing anything wrong?
Please adviseHi,
Now the error has changed:
Session.connect: java.net.SocketTimeoutException: Read timed out
I have increased the pooling interval to 1 Hr from 1 Min. Waiting for the next pooling interval result.
Guide me if I am heading right.... or anything else needs to be done.
Regards,
Krishna Chauhan -
"error cannot connect to itunes store", what can i do?
someone sent me an album and when i try to redeem it an error menssage appears: "error, cannot connect to itunes store", i don´t know what to do, can you help me?
Hello lilygarciadalba,
Welcome to the Apple Support Communities! It sounds like you are receiving an error message when attempting to connect to the iTunes Store. The following resource may provide a solution:
Can't connect to the iTunes Store - Apple Support
http://support.apple.com/en-us/HT201400
Cheers,
Matt M. -
Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mkHiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Maybe you are looking for
-
Help with re-siting phone.
My bt setup is quite simple and it works ok except that for tidyness I want to move the phone nearer to the electric socket which it also needs to be plugged into. Unfortunatly there is not one near the master socket. I have tried an extension lead
-
IPhone storage capacity - large "Other" category
Had 8GB of space taken up by 'Other' (the bar at the bottom of iTunes) and just did a full 'new phone' restore followed by a backup restore from iCloud. I also turned off PhotoStream. Other is now down to 900MB, which feels reasonable (I have quite a
-
[SOLVED] ttf-ms-win8 installation issues -- font verification failing
When I try to install the ttf-ms-win8 font package, using fonts I've copied from my Windows 8 installation, the build fails, with the issue being "One or more files did not pass the validity check". The fonts that failed the validity check are "calab
-
2 camera audio synch method?
Hi...I've got video footage from 2 cameras and want to only use the audio from one of them. How can I synch up the 2nd video to the audio file and intermittently use some of it's footage and switch back and forth between the two views?
-
Is there a way to sort the Menu Ring text? If there is, where is it located? Solved! Go to Solution.