Can´t sync Nokia N95 after upgrading to leopard

in 10.4 everything worked fine.
in 10.5. sync from Nokia to iCal does not work!
Thanks to all!
Bernhard

From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

Similar Messages

Can't use Airport Express after upgrading to Leopard

I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
I am open to suggestions to try a few things to get it working, so any help is appreciated.
Message was edited by: a j

From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

I can't sync my iPod after upgrading to iTunes 7 - Help!

I'm running an Intel 20" iMac with all of the latest software updates applied.
My iPod is a 30GB iPod Photo (4G) running software version 1.2.1.
I upgraded to iTunes 7 last night. Since then, I can't sync my iPod. Here's what happened/happens...
I installed iTunes 7. On first run (iPod disconnected) it checked for album art and ran through my library to determine the zero gap playback info. That all happened successfully.
When I connect my iPod (which is set to auto update), it recognizes it, and show the status page (also shows up in "devices" in left pane) and immediately a small window pops up with the text "Updating library on 'Evan's iPod'". The progress bar gets to somewhere between 30-70% and then hangs.
I left it running all night and it never finished. My only option was to Force Quit iTunes. Once I did, my iPod was still fine, and had all my music on it, just nothing new.
I've tried rebooting my computer and iPod, to no avail.
I would try reformatting my iPod, except that you can now (seemingly) only do that through iTunes (as opposed to a separate updater as in the past). Since iTunes locks up as soon as my iPod is connected, that doesn't help me much...
Any advice would be greatly appreciated.
Thanks,
Evan
Intel iMac 20" Mac OS X (10.4.7)

Ok... I just tried connecting my iPod directly to a USB port on the computer rather than via the USB hub I was using and everything is fine. Odd, but I'm happy now.
Thanks,
Evan

Can't connect to internet after upgrading to leopard

Can someone please HELP ME! I have a ibook g4 and I recently upgraded from tiger to Leopard. My wireless internet service worked fine until I upgraded. My computer still recognizes the network i’m trying to connect to but when I try to connect, it either says “connection time out” or “connection failed.” I know it’s not a problem with the network because my husband can connect to the same network on his macbook pro and on a psp. I know the problem has something to do with leopard. If anyone has experienced this or has any possible solutions on how to fix this please help.
Thanks in advance

Kim, I have the same problem since I upgraded to Leopard, on the wireless connection at my office. Everything still works fine at home and on campus, so it seems to have affected some wireless routers and not others.
I am still working to make the connection at work connect without the "connection failed" report, but one thing I've read is to go to your System Preferences, click on Network, select the Airport option, click on Advanced, click on the TCP/IP tab, then Configure IPv6: check to see that it's OFF. Some people have reported that this helps. Hope it does for you.

Can't open my JPEGS after upgrade to Leopard.

I upgraded to Leopard about a year ago. It has been great so far except for one problem. I had a bunch of photos from work all saved as JPEG's in a portable HD and another backup drive. Now I can't open then with any software (i.e. iPhoto or GIMP). When you look at the files on finder the are shaded (like they have been selected when you are going to move or copy) and when you click on the photo the following message comes up: "The item "????.JPEG is in use right now and can't be opened. Try again when the current task (such as moving, copying or emptying the trash) is complete". I have also gotten the message that the photos are in use by another program. I have tried multiple things including copying the files to other drives including the Mac. You can open them in other computers and even open them on quick look, but again no luck opening them with any program on my Mac.

I don't remember the version of tiger but always keep it updated with downloads. I ran DU and the postable disk is a FAT 32 formatted hard drive so it won't run. I did the other things that you said and the following cam up. The image file is called "axial drawing.jpg" stuff the I edited out has a question mark "?":
total 46320
drwx------+ 35 Johnny staff 1190 Mar 5 20:43 .
drwxr-xr-x+ 19 Johnny staff 646 Mar 3 17:00 ..
-rw-------@ 1 Johnny staff 21508 Mar 5 20:43 .DS_Store
-rw-r--r-- 1 Johnny staff 0 Feb 18 00:40 .localized
-rw-r--r--@ 1 Johnny staff 22528 Mar 3 20:52 ??? certificate request.doc
-rwxrwxrwx@ 1 Johnny staff 268 Jul 4 2008 ????? ???? Log.webloc
-rw-r--r--@ 1 Johnny staff 24064 Mar 3 20:48 BOR SCHEDULE.doc
-rwxrwxrwx 1 Johnny staff 2782593 Dec 25 15:28 Cartaa_SantaClaus.wmv
-rw-r--r--@ 1 Johnny staff 98979 Feb 28 07:00 DOC022409.pdf
drwxrwxrwx 6 Johnny staff 204 Feb 16 19:10 Free ????
-rwxrwxrwx 1 Johnny staff 876568 Jan 8 20:20 IRISHDUITEST.wmv
-rw-r--r--@ 1 Johnny staff 32256 Feb 28 06:54 ??????-Weekly Schedule.doc
-rw-r--r--@ 1 Johnny staff 109568 Feb 28 06:56 MAR09 RES CALL.doc
-rw-r--r--@ 1 Johnny staff 109056 Feb 28 06:56 MAR09 STAFF CALL.doc
drwxrwxrwx 15 Johnny staff 510 Feb 16 19:10 Mastopexy
-rwxrwxrwx 1 Johnny staff 14918465 Oct 8 21:29 Mastopexy97.pptx
-rw-r--r-- 1 Johnny staff 8700 Mar 3 06:00 ?????PDF.pdf
drwxrwxrwx 6 Johnny staff 204 Feb 16 19:10 Papers
-rw-r--r--@ 1 Johnny staff 9903 Mar 5 19:11 Picture 1.png
-rw-r--r--@ 1 Johnny staff 240260 Mar 5 19:12 Picture 2.png
-rw-r--r--@ 1 Johnny staff 253781 Mar 5 19:12 Picture 5.png
drwxrwxrwx 15 Johnny staff 510 Mar 31 2005 Presentations
-rwxrwxrwx@ 1 Johnny staff 16308 May 1 2008 ????? ???? flag.png
-rwxrwxrwx@ 1 Johnny staff 265 Jul 4 2008 Resident Hours.webloc
-rwxrwxrwx 1 Johnny staff 34855 Sep 28 09:38 Spectacles.jpg
-rwxrwxrwx 1 Johnny staff 2701336 Nov 8 07:51 ??????? Cartoon.JPG
-rwxrwxrwx@ 1 Johnny staff 0 Feb 18 19:28 ??????? Case Log
-rwxrwxrwx@ 1 Johnny staff 31232 Jan 8 20:16 Video Library Listing.doc
-rw-r--r--@ 1 Johnny staff 34816 Feb 28 06:55 ???????-Weekly Schedule.doc
-rwxrwxrwx@ 1 Johnny staff 0 Jun 12 2006 *axial drawing.jpg*
drwxrwxrwx 8 Johnny staff 272 Feb 16 19:10 gynecomastia
-rwxrwxrwx@ 1 Johnny staff 287 Jul 30 2008 iChain Login.webloc
-rwxrwxrwx@ 1 Johnny staff 19456 Jul 13 2008 lacasa ????? keys.doc
drwxrwxrwx 4 Johnny staff 136 Feb 16 19:10 polands
-rw-r--r-- 1 Johnny staff 1244608 Feb 28 15:06 rockbox-ipodnano.pdf
????????????-imac:~ Johnny$

Can't send e-mail after upgrading to Leopard

I recently upgraded my OSX from Tiger to Leopard. When I log into my Mail account, everything appears to be working fine; I can receive mail, compose messages, etc. But the "Send" button is grayed out. I don't get any prompts asking for permission to send -- it's simply not an available option. Is this fixable, or do I need to re-install?

From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

OVI 3.1.1.80 still can't sync Nokia Map v3.08

Dear Nokia and all,
The OVI suite 3.1.1.80 still can't sync Nokia Map v3.08 on my N8. Once I press the map button in OVI suite and it show an error message " Please restart your PC. If the problem can't be solved, please download the latest version OVI suite."
So what can I do to sovle this problem?
Thanks a lot and any suggestions.

Similar problem. When i press "Maps" button, application writes: "Maps is running on your device" (even after phone and PC restarts), and when i press "Try again" link, it wrotes: "Something's gone wrong - reinstall Ovi"
The problem started on Ovi suite 3.1.1.80 and continues on 3.1.1.85 - reinstalling Ovi doesn't help.
I use N8 with 014.002 system.
Appreciate your help.
Attachments:
ovi_1.PNG ‏20 KB
ovi_2.PNG ‏18 KB

IPhone won't sync after upgrading to Leopard

My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
I've tried everything apple suggests:
1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
http://docs.info.apple.com/article.html?artnum=306637

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't update my apps after upgrade to iOS 6...?

I can't update my apps after upgrade to iOS 6

Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

I can't sync my ipad2 after updating to ios5. Says 'waiting for changes to be made'. Any ideas?

I can't sync my ipad2 after updating to ios5. Message is 'waiting for changes to be applied'. Any ideas?

Have you tried doing a Restore?
For some problems the solution is to download & reinstall iTunes.
 Cheers, Tom

HT1414 I can not sync my iPhone after restoring it - my computer only gives me the restore (again and again and again) option. I have no music and only a few aps now on my iPhone. Any tips before I go to the genius bar?

I can not sync my iPhone after restoring it - my computer only gives me the restore (again and again and again) option. I have no music and only a few aps now on my iPhone. Any tips before I go to the genius bar?

If you restored as new, without using a backup, and still only get an option to restore, there is a hardware problem or the phone was previously hacked (jailbroken, downgraded iOS, unauthorized unlock). Your only option is to take it to Apple or whoever provides iPhone service in your country.

Can't to connect WiFi after upgrade to 10.7.1

My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

What can I do about this: After upgrading to firefox 6, I get this error. TypeError: Components.classes[cid] is undefined???

What can I do about this:
After upgrading to firefox 6, I get this error.
When I click to open Firefox, A box open with the following error:
JAVASCRIPT Application
TypeError: Components.classes[cid] is undefined?
After I click close on the box, then Firefox will start. I really just want to get the error fixed so that when I want firefox open, I don't have to see this box anymore.

You need to figure out which add-on is causing that error and disable it until the developer of that add-on fixes it. There may be an error message about that in the Error Console, accessed through the Web Developer menu item or through {Ctrl + Shft + J}.
Also see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Can´t sync Nokia N95 after upgrading to leopard

Similar Messages

Maybe you are looking for