Can't transfer files from old macbook to new retina?

Hello, I am well aware that the macbook pro retina does not have a firewire 800 port, but rather thunderbolt. Unfortunately I didn't know of this when I asked an apple employee about how to transfer files from my old broken macbook pro (leopard) to the new retina I bought. He only told me to get a firewire 800 wire. So now I have the firewire 800 cable but I cannot connect it to a my macbook pro retina. Is there any way I could transfer files from my broken mac to this one? To be more accurate: my broken macbook pro is just that the screen is broken, otherwise I would just transfer the files by usb; but since you cannot access the computer at all except for turning it on I am unable to do this.
I do have an alternative theory, if anyone thinks it could work please let me know. My mother has a mac desktop, with a firewire 800 port. Could I transfer my files onto her computer and then transfer those via usb to the new macbook retina? Or is there a way to connect the old broken macbook to the new one? I apologize if I sound very confusing right now, it's just that I finally got my new computer and I cannot transfer my files onto it. Thank you for your help.

I used wifi to transfer two users and system preferences during setup, since that was a relatively small amount of data.  To transfer my main account (40Gb or so), I turned off wifi on my old laptop, ran an ethernet cable to the ethernet-thunderbolt adapter to mbp-r, ran migration assistant on both - worked fine.  I didn't feel like waiting for the firewire adapter.

Similar Messages

  • Will apple store transfer files from old macbook to new?

    will apple store transfer files from old mackbook to new

    If  you mean that you are going to an Apple Store to buy a new Mac, and you want to know if they will transfer your data for you then the answer is "maybe." Many stores will do that for you, but some may not. Good idea to ask first.

  • Can I transfer system from old macbook to new macbook using same OS with time machine?

    I have a MacBook running snow Leopard.  Thinking of getting a new Pro but want to just transfer my entire desktop and system to new MacBook using Time Machine restore.  Is this possible?  If not what are my other options so I do not have to rebuild desktop?
    Thanks!

    You can do it either directly from the older MacBook or from Time Machine. Your new MBP is unlikely to boot to the system on the MB as the newer Pro will have a later OS build and different hardware drivers among other things.
    Just use Setup Assistant. When you boot the new MBP, after the welcome video you'll be taken into Setup Assistant; you'll be asked if you want to transfer your Applications, Home Folder and prefences from another source. Choose either 'from another Mac' or 'from a TM backup' as appropriate, and connect the Mac (by firewire) or the TM drive when prompted and let it do it's thing.
    That will ensure you get one account with no permissions errors and all your stuff should work just as it did on the MB.

  • Transfer Files from Old MacBook to New MacBook Pro

    I'm just about to take delivery of a new macbook pro which will have Lion OS on it.
    My present MacBook is running 10.6.8 and I have a Time Capsule on my network which contains backups of this MacBook.
    Is there a procedure to folow which will allow me to add the new MacBook Pro onto the network and then transfer over all my ITunes Libray , Photos, contacts, Emails, Vidoes, etc?

    Have a look here...
    Setting-up a new Mac from an old one, its backups, or a PC
    Using Migration Assistant on Lion
    Migration Assistant tips and tricks

  • Can't transfer files from old computer to new

    Hello, Bought a new MacBook Pro and have old pictures, files, apps and fonts on an old Powerbook.  Migration utility allows me to move entire files over, but would like to move only specific files. I remember once opening an old computer much like a hard drive and drag and dropping what I wanted. Any ideas.
    Thanks,
    Jamie Clements

    You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Best way to transfer files from old Macbook Pro to new one?

    I just got a new Macbook Pro from Apple...YEEEEAAAHHHH! 
    So....
    What's the best way to transfer files from old Macbook Pro to new one?  I know Migration assistant, but is there a recommended way?  I don't want to put do a system restore or transfer everything from the old laptop, but I do want to move important things like photos, music, documents and such over.  Any suggestions on best way to do this?
    Another question, perhaps subquestion.  If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?
    Just looking for hints from the experts so this puppy is set up in the best way possible.

    Just one comment on this:
    ‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
    the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
    Otherwise, see the link to Pondini.
    I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

  • How can I transfer files from my macbook pro to my ipad w/ retna display via my USB,  I can't get maverick or icloud to load on my macbook.

    I just bought a new ipad and would like to transfer files from my macbook pro.  I cannot get icloud to work on my Macbook.  I cannot get Maverick to load on my macbook.

    if I plug my ipad to my macbook nothing happens except it charges.  no screen prompt like I would expect.

  • How can i transfer everything from old iphone4s to new iphone5?

    just bought new iphone5, how do i transfer all the apps/contacts/etc from olf iphone4s?

    The easiest way is to back up old phone to icloud and then restore new phone from that old phone backup. Any purchased content such as apps and songs from the itunes and apps stores can be downloaded again.
    These directions are for an ipad, but the method is the same.
    How to transfer everything from old iPad to new
    http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/

  • How can i transfer data from old MacBook Pro, which is too old to update time machine, to the newest MacBook Pro?

    I recently bought a new MacBook Pro, and wanted to transfer all the data from my old MacBook Pro, but I get the message saying I need to update time machine on my old one in order to use time machine. However, my old one is too old to update. So I decided to use the cable to transfer, because I heard I can do it that way even though it could take time. But I have no idea what to do...
    Can someone help me?

    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC System Preference add-ons
    All Unsanity Haxies Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5 Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    OS X Lion: How to use Migration Assistant to transfer files from another Mac
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    Repair the hard drive and permissions using Disk Utility.
    Backup your data.  This is vitally important in case you make a mistake or there's some other problem.
    Connect a Firewire cable between your old Mac and your new Intel Mac.
    Startup your old Mac in Transferring files between two computers using FireWire.
    Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • Transfer iTunes files from old MacBook to new MacBook Pro

    How do I transfer just my iTunes files from a MacBook to my new MacBook Pro?

    The best bet is for you to transfer your iTunes library to the new Mac with the Migration Assistant. When you first fire up a Mac and it asks if you want to move your data, that’s one chance, but you can also set up the new Mac as pristinely new and use Migration Assistant later. Just launch it from the Utilities folder and tell it what you want to do—you can transfer your library over Wi-Fi, but if both Macs have a FireWire port, it’s much faster to connect them that way and use Target Disk Mode. (Start up the old Mac holding down T, which mounts it as an external drive on the new Mac for Migration Assistant to mine—but Migration Assistant walks you through the whole process.) Migration Assistant doesn’t have a setting specifically for iTunes, but if you migrate your user account’s Music folder, that’ll contain both your media and your library database, which stores those preferences you want to transfer.
    Migrate your Music folder to your new Mac. (Which we obviously can’t do here because the MacBook Air is a few hundred gigs light…)
    If you’d rather do it manually, first move the files in your home folder’s Music/iTunes/iTunes Media folder from the old Mac to the same location on the new Mac. Then export the iTunes Library database from your old Mac—go to File > Library > Export Library. Move the resulting XML file to the new Mac. Open iTunes, choose File > Library > Import Playlist and select that XML file.
    Why not use Home Sharing within iTunes, you may wonder? I found out the hard way when recently combining songs from multiple laptops and external drives into one, new, started-from-scratch mega-library on my new iMac: Home Sharing is great for actually moving music, videos, and apps from one machine to another over the network, but it doesn’t move the metadata. My ratings and play counts were wiped out.

  • Transferring files from old macbook to new

    I'm trying to transfer files and programs from old macbook pro to new one, but run into problems using Migration Assistant, and time machine.  Not sure what to do differently...

    Probably the most straightforward way to get iTunes onto your new computer is to network the two and copy your iTunes folder across. This works fine if you have been using iTunes to completely manage your music and all your songs are in iTunes Music not in different folders. Connecting two Mac computers using Ethernet
    Another way is to put your original computer into target disk mode and copy the data over Firewire: How to use FireWire target disk mode
    Copying the whole folder brings with it the iTunes Music folder and also the iTunes Library (iTunes Library.itl in Windows) database file which holds all the information about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). You'll get more information including the Folder/File structure in this article: What are the iTunes library files?
    When you copy the iTunes folder make sure you put it into the same location on the new computer. This has to be the exact same place, on a Mac this would be in Username/Music/. When you open iTunes on the new computer it will be the same as on the original one Songs, Playlists, Play Counts, Ratings etc. When I moved iTunes a while ago for my daughter I was also using the same version of iTunes, not sure how important that is but it's probably worth keeping them the same.

  • How to transfer files from old mac to new

    How so I transfer files from my old mac 1.5 gb (os x 10.4.11) with disk drive to a new imac with 8 gb (os x 10.9.1) without disk drive?  Sorry but I don't want to pay the $99 service cost?
    Where can I find step by step instructions online to do this?

    new imac with 8 gb (os x 10.9.1) without disk drive
    Sorry - are you saying that your new iMac does not have a hard drive?
    If it does, please read this article (in particular this section):
    http://support.apple.com/kb/HT4889
    You cannot use the methods linked to above; you will need to use the method offered in the Apple article.

  • How to transfer files from old iMac to new iMac without transferring everything.

    I just got a new iMac and would like to transfer files from my old iMac.  I don't want to transfer everything from the old iMac.  I just want the files, iTunes library, iPhoto library, etc.  I don't want to transfer applications and settings.  I was told in the Apple store that if I transferred my files using system setup then my new computer would look just like my old one.  I'd rather start out fresh with the new one and just bring in the files I need.  Is there a tool that allows you to customize what you transfer over from old to new?  Thanks for your help!!

    Carbon Copy Cloner might be the correct tool. It lets you pick and choose what to clone.
    http://www.bombich.com/ccc_features.html
    install CCC on the old Mac,
    connect the Macs with an ethernet cable,
    enable file sharing on both Macs,
    use "connect to server" (in Go menu) to mount the new Mac's drive on the old Mac.
    run CCC.

  • How to transfer files from old iMac to new iMac

    What is the easiest way to transfer files from my current iMac (intel) to my new iMac..which be arriving this week?
    Thanks

    Get a Firewire cable to run between your old iMac and the new one. Boot the old iMac into Target Disk Mode. Boot the new computer for the first time. You will find yourself in the Setup Assistant. You will have an option to transfer files from another drive or Mac. Choose that option to transfer your Home folder, third-party applications and support files, and network preferences. You will opt to transfer from your old iMac's hard drive which should appear as an alternative source.

  • How do i transfer files from old ipad to new ipad if it has already been activated as new?

    I purchased a new ipad and need to transfer files from my old ipad.  However, it has already been set up as new and all support suggestions I have found have been for choosing the restore option in the set-up stage.  How do I do it now that it has been activated?

    It depends on if you even have a backup. If you had a backup, I don't suppose that you would have to ask how to restore from it.
    Did you backup your old iPad? If you so, did you backup with iTunes or iCloud? This explains how to backup and how to restore from a backup, but once again, if you don't have that backup any longer, this will not work.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766

Maybe you are looking for

  • Problem with Drill down reports demo

    Hi, Did somebody successfully installed the drill down demo. I am not able to get the results here getting some javascript error "object expected". I have created a schema, also the cgicmd.dat report variables attahced the rep_util file. I could see

  • How to enhance the standard search with custom field?

    Hi all, I would like to know the general optimal procedure to enhance the standard searches like Opportunity search or Lead search. I've gone through some of the threads here. Some suggest, to add the new field using AET and copy the IMPL class of th

  • Calling an XSL file in an XSL file

    Hi, I'm importing xsl file into xi and uisng it for mapping. My query is im using a function in my mapping which is actually present in another xsl file how can i call the other xsl file in my present xsl file which is the base file for the mapping

  • Setting compression and resolution in Print Booklet

    I'm testing Print Booklet for InDesign CS6 on Windows XP, using Acrobat 8. I can't find the settings for compression (none) and resolution (288ppi) in the InDesign dialogue. I can set these parameters directly in the parameter list for the 'printer'

  • Trying to get Home Sharing to work

    Hi all, So I've turned on Home Sharing on my MacBook Pro. I loaded iTunes on my daughter's Dell laptop and turned on Home Sharing. I want to transfer some of my music library to her computer. iTunes on my MBP properly shows the existence of her (I su