Can't Windows 7 access an RD on Server 2012 that uses SHA512/2048-bit certificates

I have a Server 2012 R2 Remote Desktop that works fine if configured with the self-signed certs (SHA1/2048-bit), but not with certs from our internal CA.
With the self-signed certs, our remote clients can connect but of course get security warnings due to the untrusted certificates. The clients do trust our root CA, so we should be able to eliminate those by using certs from our internal CA instead.
However, when I do configure the Server 2012 R2 RD to use certs generated on our internal CA (SHA512/2048-bit) clients (Windows 7) cannot open RDP sessions. They get errors and on server event log contain:
(Source: Schannel; Event ID: 36874) [sic] An TLS 1.2 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed.
(Source: Schannel; Event ID: 36888) A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 40. The Windows SChannel error state is 1205.
The strange thing is that if I connect from client on Server 2008 R2, it can open RDP session!!!
Thanks.

Hi,
Indicates by the event, it seems that the Cipher Suites use by the client are disabled on the server.
Please check if any Cipher Suites of TLS 1.2 are disabled on the server.
Cipher Suites in Schannel
http://msdn.microsoft.com/en-us/library/windows/desktop/aa374757(v=vs.85).aspx
How to restrict the use of certain cryptographic algorithms and protocols in Schannel.dll
http://support.microsoft.com/kb/245030
Hope this helps.
Jeremy Wu
TechNet Community Support

Similar Messages

I can not install Waik and mdt on server 2012 so that i can deploy windows 7 please may you help me?

i can not install Waik and mdt on server 2012 so that i can deploy windows 7 on target machine, i have downloaded mdt Waik i got error saying you must install frame 2.0 which needs also adk windows 8. i am using hyper machine.
thank you

Hi Warsame12,
It is worth mentioning that don’t use IPV6 PXE, Windows 7 doesn’t support WDS 2012 deployment over IPv6 PXE. If IPv6 PXE boot is enabled and a
Windows 7 installation is selected, a blank screen will appear and Setup will not run.
The related KB:
Windows 7 client deployment over IPv6 PXE network boot does not work.
http://support.microsoft.com/kb/2803741
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Linked Server to Access Database in SQL Server 2012 is working perfectly.But, All of sudden it is showing SQL Error Code:7303

Linked Server to Access Database in SQL Server 2012 is working perfectly.But, All of sudden it is showing SQL Error Code:7303
Unable to connect to the database type that is created with earlier versions type. But the same Linked Server in another SQL Server instance is working perfectly. I am unable to rectify what is the problem please help.

All of sudden it is showing SQL Error Code:7303
Error 7303 = "Cannot initialize the data source object of OLE DB provider "%ls" for linked server "%ls"."?
Check the data Provider on the machine, e.g. using ODBC Admin by creating a DSN
Olaf Helper
Hi Olaf Helper,
I don't now how to add a DSN for the Access Database using ODBC Admin. Can you Please help me with that one. as the solution to above problem i Have added a startup parameter -g512 to SQL Server is it effects my existing Assemblies in SQL Server. I am replacing
the startup parameter as -g500 to -g512 here.
Thank you
Regards,
AyubKhan M

Windows Server 2012 - Printing using UNC path not working

Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario.

I can no longer access apps on my new iPad that we're downloaded on old one. Using cloud.

I can no longer access apps on my new iPad that we're downloaded on old iPad. Using cloud.

Are you trying to download them from your purchased list? If so, make sure you are signed in with the Apple ID you used to purchase them in Settings>iTunes & App Store, and that the apps are still available for purchase in the App store. Then you should be able to download them as explained here: Download past purchases.
If that isn't your question, please explain further.

Can Reporting Services 2005 report on SQL Server 2012 database?

We would like to upgrade our SQL Server from Standard 2005 to Enterprise/Standard 2012. Unfortunately, we also have a lot of reports based on Reporting Services 2005. If possible we would like avoid upgrading them at this time.
Is it possible to run Reporting Services 2005 of SQL Server 2012? If yes then is there pre-requiste like drivers or dll or any other to connect SSRS 2005 to SQL server 2012?
If we run Reporting Services 2005 of SQL Server 2012 then do we will face performance lag issue due to version difference of SSRS 2005 and SQL server 2012?

Moderators,
Can anyone merge this -
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2c44351c-35b4-4208-a2b7-88fc810d53ff/can-reporting-services-2005-report-on-sql-server-2012-database?forum=sqlreportingservices
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Is windows server 2012 R2 available in 32 bit?

Hi,
i need to ask is windows server 2012 R2 available in 32 bit or it is only available in 64 bit as in win 2k8 R2?
Thanks.

Windows Server is only available in 64-bit versions.
http://betanews.com/2007/05/16/windows-server-2008-the-last-32-bit-operating-system/
Bill

HT4557 I have a MacBook Pro using my Apple ID and Password, can I home share with my wife's iPad that uses her Apple ID and password

I have a MacBook Pro using my Apple ID and Password, can I home share with my wife's iPad that uses her Apple ID and password

You have to all be signed into the same Apple ID and on the same WiFi network, but yes you can do it. You have to sign into her Apple ID on your iPad in the store settings.

Can't download files on Android from Server 2012 Essentials Remote Web Access

I have two servers, one with Windows Server 2012 Essentials, and the other SBS 2011. Employees like using Remote Web Access to log in from anywhere and have access to shared folders. It works perfect on a Desktop computer, but when they try to
use their Android tablets or phones, and want to download a file (e.g. a PDF) from one of the shared folders on the server, the download fails. When Microsoft was pushing 2012 they said RWA worked great on mobile devices, do I have to set up something
separately to make this happen?
I've completely disabled the firewall, and have ports 80,443,987, and 1723(just to be safe) all forwarded to the server.
I can log into the RWA site on the android, browse files and folders, but when I select a PDF to download, the download shows as if it's starting, shows in my android notification as if its going to start downloading (Shows MobileDownload www.mydomain.com)
but eventually after a few minutes, will time out and show "Download Unsuccessful".
Network connectivity is fine as I can do this on a Windows Desktop PC using any browser (Chrome, Firefox, IE) and successfully download anything I want.
UPDATE: I found this in the event handler when I tried to download something from a mobile device...
- System
- Provider
[ Name] ASP.NET 4.0.30319.0
- EventID 1309
[ Qualifiers] 32768
Level 3
Task 3
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-01-12T16:49:12.000000000Z
EventRecordID 72818
Channel Application
Computer MYSERVER.MYDOMAIN.local
Security
- EventData
3005
An unhandled exception has occurred.
1/12/2014 11:49:12 AM
1/12/2014 4:49:12 PM
953eedf1ad414391a193e5f98a281da5
263
3
0
/LM/W3SVC/1/ROOT/Remote-1-130340167702975633
Full
/Remote
C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\
MYSERVER
2592
w3wp.exe
NT AUTHORITY\NETWORK SERVICE
HttpException
Server cannot set content type after HTTP headers have been sent. at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
https://remote.MYDOMAIN.com:443/Remote/fs/MobileDownload.aspx?path=\\MYSERVER\PICTURES\2013603.jpg
/Remote/fs/MobileDownload.aspx
MY.IP.ADDRESS.141
MYDOMAIN\user
True
Forms
NT AUTHORITY\NETWORK SERVICE
31
NT AUTHORITY\NETWORK SERVICE
False
at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Hi,
Before going further, would you please let me confirm something firstly?
Would you please let me know if all Android devices
encounter this same issue? If you download different type files, will still this issue persists? You can upload a small file (such as a text file) to the share folder, then check if Android device can’t download it.
Based on your description, when logon a desktop computer, you will download files via RWA successfully. Please use the user account which logon computer to logon
the Android device, will still fail to download?
Please check if there has enough free space in Android devices that be used to save download.
When this issue occurred, please check the state of Android device in Dashboard. Besides, I suggest you should run the Best Practices Analyzer (BPA) and fix all
it can find. Then monitor the result.
Run the Windows Server 2012 Essentials Best Practices Analyzer
http://technet.microsoft.com/en-us/library/jj200181.aspx
In addition, regarding to the Event ID 1309, please refer to the following articles.
Event ID: 1309 Source: ASP.NET 4.0.30319.0
http://www.eventid.net/display-eventid-1309-source-ASP.NET%204.0.30319.0-eventno-11022-phase-1.htm
Hope this helps.
Best regards,
Justin Gu

Can't install the Windows Update package KB2674319 (SQL Server 2012 SP1)

Hi. I need to get the update of my MS SQL Server 2012 installation in order to get the SP1.
When I run the Windows Update it appears to download well the package.
Then when it begins to install I get the error "84C4000E: Se ha producido un error con Windows Update" (our server is in Spanish).
I have the last updates for Windows Server, a rebooted our server and the issue remains.
Any idea of what should I do to get the SP1 update?
Thanks in advance.
Gustavo.

Hi Gustavo,
Based on your description, I suggest you should refer to the following articles. And then check if you can install the update successfully.
SQL 2012 Server fails in Windows Update with error 84C4000E
http://techtuxwords.blogspot.in/2013/10/sql-2012-server-fails-in-windows-update.html
MS SQL Server 2008 R2 SP1 fails with error 84C4000E
http://techtuxwords.blogspot.in/2011/09/ms-sql-server-2008-r2-sp1-fails-with.html
If this issue still persists, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Hello,
I currently have windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions
For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM.
As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.
Using an RDP client( v8.1) I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs
and I can use the device without any issues.
However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client) but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
Because I have ran all updates the rdp version on the VM is running v8.1.
Previous to installing the updates USBr still was not working
I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM :
RDP 8.0 -- Enabled
Configure RFX -- Enabled
Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
Many Thanks
Brian

Hi,
According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
Server6: Conversion is not supported in restricted language mode or a Data section.
Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
By the way, from Technet:
You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
Client Access Permissions
http://technet.microsoft.com/en-us/library/dd638131.aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Can't Dual Boot 8.1 and Server 2012

Hello folks; I hope someone has a solution to this issue. Right now, I'm stumped; and, I can't seem to find an answer on the net.
I have a crash-and-burn system, an HP Envy 700-400z, with an 256m SSD that came partitioned into Windows & Recovery at the factory; and, a 1T HDD drive. I want to load this machine with a couple of OSs; but I can't.
My first try was with Win2012; and, one of two things happens. If I try to install Win2012 to the HDD, the installation hangs; and, I have to back out the installation.
I then shrunk the partition on which Windows 8.1 sits; and created another partition for Win2012 to see what would happen. I mounted the new partition from an Empty folder in the now shrunk partition. I did get a message when I installed 2012
that the partitions are not in the correct order; but, I went ahead anyway with the installation just to see what would happen. This seems to work for awhile; and I can boot to either 8.1 or 2012; but at some point, I lose network access. I get
a message that the controller has an invalid IP configuration; and, nothing works but restoring the disk image to factory setting.
If it did work, it, obviously, won't work long term; because, I can't keep shrinking the one partition on the SSD to load SUSE Linux and other OSs that I want to use for my studies. I know I can use Hyper-V as a resolution for multiple OSs; but at
the moment, I want to understand what the deal is with GPT and the installation problems I'm having.
I suspected GPT has something to do with my problem; but am not sure. I read up on UEFI; but, both the SSD and the HDD are GPT drives. I've looked elsewhere on-line; but I come up with nothing that addresses the issue except for general discussions
on GPT. Ideally; I'd like to restore the original boot partition on the SSD to its factory setting, and carve up the 1T HDD for all the other OSs before I tackle doing the same thing with Hyper-V.
At this point, there's nothing on the machine but two OSs and SQL Server 2012; and I have the recovery disks if I happen to shoot myself in the foot; so, it doesn't matter what I do to the disk configuration. GPT is new territory for me; so, any help
with this problem is greatly appreciated.

Hi,
According to your description, my understanding is that you want to deploy dual Boot Windows 8.1 and Windows Server 2012 on VHD.
I recommend you to confirm that if your device meets the requirement:
Windows 8.1 system requirements
http://windows.microsoft.com/en-us/windows-8/system-requirements
System Requirements for Windows Server 2012 Essentials
https://technet.microsoft.com/en-us/library/jj200132.aspx
Then, reference the link below to install system:
Deploy Windows on a VHD (Native Boot)
https://technet.microsoft.com/en-us/library/hh824872.aspx?f=255&MSPPError=-2147217396
“Step-By-Step”- 4 Methods to Dual Boot Microsoft Windows 8 and Windows Server 2012 with or without Windows 7
http://blogs.technet.com/b/blainbar/archive/2012/09/25/step-by-step-4-ways-to-dual-boot-microsoft-windows-8-and-windows-server-2012-with-or-without-windows-7.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Printers added and shared without access to printer properties - Server 2012

On a Server 2012 domain controller, without the Print Management role installed, I have added a network printer through ‘Control Panel’ > ’Devices and Printers’, shared it through group policy, and the domain
member computers are able to print to the shared printer. But the printer never showed up in ‘Devices and Printers’ folder on the server.
The problem comes in since there is no way to edit the settings of the printer. The print queue for the printer does show up in Device Manager. I right-click the printer and select ‘Properties’, open the ‘Settings’ tab, and follow the link that
states, “Please go to the Devices and Printers folder to manage your printer”.
But this just opens up the ‘Devices and Printers’ folder which, does show/contain my printers.
If you are asking why the Print Management role is not used, It is because this system is self-contained and the most minimal features are installed on all computers for security compliance reasons. Therefore we typically just install the printers
on the domain controllers (via Devices and Printers) and then share them via Group Policy to the small number of workstations on the segregated network.
Did the ability to bypass installation of a Print Management role, and still edit printer settings, change for Server 2012? (We were able to do this with Server 2008R2. However, I can’t find any specific Microsoft documentation describing the change.)
So to try to fix this issue on the affected system (from my explanation above), I installed the Print Management role but the printers I created in ‘Control Panel’
don’t show up in Print Management. I still have no way to access the printer settings. Do I have to reinstall the printers? How do I remove the old printers? Do I just remove the ‘Print queues’ from Device Manager?
I tried to replicate my issue on a test system domain controller, built with very similar installation scripts as the affected system above was. I added a printer via ‘Control Panel’ > ‘Devices and Printers’, shared them, and they do not show up. However,
when I then install the Print Management role, the printers I created in ‘Control Panel’
now show up in Print Management. This is different than my affected system above.
If anyone could provide any insight on why this is happening it would be much appreciated!
Thanks,
Dan

Most likely this is a security setting on the print shares. When you open Devices and Printers, the security token for BUILTIN accounts is not passed to the Explorer process so launching this User Interface as administrator does not contain the ADMIN security
token. If you have removed the Everyone group from the printer security, then the printer can disappear in this UI. For printer admin tasks you should use the tools provided by the print team Printmanagement.msc.
Adding the Print Role opens the spooler RPC endpoint ( which you can also do by sharing a printer ) and adds the tools.
Can you just add the tools without installing the Role?
dism /online /enable-feature /featurename:Printing-AdminTools-collection
Alan Morris Windows Printing Team

Anywhere Access VPN problem on Server 2012 R2

I am having trouble with Anywhere Access VPN on Server Essentials on 2012 R2.
If I use a browser from the outside world and enter my external IP address I get a login to the server.
If I use a browser from the outside world and enter the remoteaccess site I get a login to the server.
If I try to connect through the VPN from the outside world I get a login request which I complete successfully I then get:
"Error Connecting to myserver.remotewebaccess.com Error 720 a connection to the remote computer could not be established you might need to change the network settings for this connection"
Locally I go to the Essentials console and try to configure Anywhere Access.
When I open the settings window for Anywhere Access I get the message that it is updating then I get the message "Issues detected. Click repair to attempt resolving the issues" I click on "Repair", after a warning window about
availability the Repair Anywhere Access Window opens and says Setting up Remote Desktop. The green bar scrolls but it never completes. (tried for hours)
I have tried rebooting and repeating the repair, but I get the same results.
The router is a 3801HGV that does not support uPnP. I have forwarded ports 443, and 80 to the server.

Hi,
Would you please let me know if refer to the suggestion that IKFI provided and solve this issue?
Based on your description, please let me know the client OS that you use firstly. Meanwhile, please refer to
the following KB, and then check if can solve this issue.
Error 720: No PPP Control Protocols Configured
http://support.microsoft.com/kb/314869/en-us
In addition, would you please let me know if have a DHCP Server in your local network? If not, you have to
add a static address pool. Meanwhile, please refer to the following article and check if miss something when you install VPN.
How to Install VPN on Windows Server 2012
http://www.thomasmaurer.ch/2012/07/how-to-install-vpn-on-windows-server-2012/
There is a similar question that you can also refer to.
A fix for Error 720: A Connection to the remote computer could not be established when trying to connect to
a Windows 7 VPN
http://www.paulkiddie.com/2011/06/a-fix-for-error-720-a-connection-to-the-remote-computer-could-not-be-established-when-trying-to-connect-to-a-windows-7-vpn/
Hope this helps.
Best regards,
Justin Gu

Can't Windows 7 access an RD on Server 2012 that uses SHA512/2048-bit certificates

Similar Messages

Maybe you are looking for