Can't write an email then include a pic!!!!!

They really need to fix this!!! You can start at a photo and set it up in a new email, but you can't write an email or reply to an email and then attach a pic!!!!!

Can't write an email then include a pic!!!!!
Sure you can.
Just drag it in.
Perhaps I'm missing something here, but all I do is
DRAG the JPG or other image into the open "new mail"
message area, and it's embedded there.
Works every time.
I've also successfully used the "Attach File" button quite
a few times as well.

Similar Messages

  • "Files can not write or be written to disk" (pic problem)

    I can't seem to figure out why I get the error that I can't write to the disk. Does that mean I can't write to the ipod? I've tried 5 r's and still can't figure it out. Is is an OS issue on my comp? Anyway, I can't figure it out...thanks for your time.
    Greg

    Welcome to Apple Discussions!
    Try this...
    Disk cannot be read from or written to error syncing iPod in iTunes
    btabz

  • How can I forward an email and include the attached images?

    I sent a client an email with attahced images (I attached the images, pictures I took).  The client responded with the images attached to the response.  When I try to forward that response to a third party the attached images become place holders only, no image. 
    Shouldn't my forwarded mail include the images?  Short of re-attaching the images how can I get them included in the forwarded email?

    I tested a few I forwarded to myself and I could still forward with attachments. You might try Redirecting it (Message menu).

  • How can I write from an Include?

    Hi to everybody!!
    I've a problem with my include...inside of this I've to write '2'. for make this I put...
    write: '2'.
    But when I execute the program... the number 2 doesn't appears, somebody told me that I need to put the End-OF-SELECTION, but when I can't see it.
    Does anybody know how can I write something from an include?
    Thanks a lot.
    Regards,
    Rebeca

    Try this way...
    I don't where you placed the include , you place under the event and see.
    REPORT ZTEST.
    END-OF-SELECTION.
    INCLUDE ZINCLUDE.

  • The light on my apple tv is blinking furiously.  i've held down the menu button, plugged and unplugged it, and just tried restoring it via micro usb.  but the restore downloads then says it can't finish because it can't write to the disc.  lost lost

    how do i get the light on my apple tv to stop blinking?  have tried all the recommended methods, including holding down "menu" on remote, plugging and unplugging etc.  when i try to restore via itunes it downloads then when it's done says it can't write to disc.

    Hi lostinmedford,
    Welcome to the Apple Support Communities!
    I understand that the light is quickly flashing on your Apple TV and you are unable to restore it. According to the attached article, you are working through the correct steps by trying to reset and restore the Apple TV. In this situation, if the restore did not resolve the issue, it may be necessary to have the Apple TV evaluated for service by using the link in the attached article. 
    Apple TV: About the status light - Apple Support
    Flashes quickly
    Having issues. Try restarting or waking your Apple TV. If your Apple TV does not start up properly, you might need to reset the Apple TV or restore it to factory settings. See Apple TV (2nd and 3rd generation): Restoring your Apple TV. If this does not resolve the issue, refer to the Service FAQ for additional assistance.
    Best regards,
    Joe

  • Can't write or send email

    I have been having problems with my Mail Program on my new I-Mac starting about 3-5 days after I got things up and running.
    I have been reading the strings about not being able to send mail and have tried a few suggestions without any success. There are some more suggestions on the forum yet to try and I will get to them shortly.
    The problem I would like to get solved first is the fact that I can Address an email, I can write in the subject line, but when I try to write a message in the message body all I can type is about four letters and then it quits. My cursor even disappears. However I can cut and paste a message from a word processor and get it in the message body.
    So it is not going to do me much good to solve the sending problem if I can't write a message anyway.
    This problem is the same on both my ISP and .mac accounts
    I have reset my permissions and called my ISP to see if they have change any of their settings.
    Entourage works well with my ISP account. I have not set up my .mac account in it yet. I would like to get Mail working and use it exclusively if I can.
    Any help will be appreciated.
    I-Mac G5   Mac OS X (10.4.3)  

    I have been having problems with my Mail Program on
    my new I-Mac starting about 3-5 days after I got
    things up and running.
    I have been reading the strings about not being able
    to send mail and have tried a few suggestions without
    any success. There are some more suggestions on the
    forum yet to try and I will get to them shortly.
    The problem I would like to get solved first is the
    fact that I can Address an email, I can write in the
    subject line, but when I try to write a message in
    the message body all I can type is about four letters
    and then it quits. My cursor even disappears. However
    I can cut and paste a message from a word processor
    and get it in the message body.
    So it is not going to do me much good to solve the
    sending problem if I can't write a message anyway.
    This problem is the same on both my ISP and .mac
    accounts
    I have reset my permissions and called my ISP to see
    if they have change any of their settings.
    Entourage works well with my ISP account. I have not
    set up my .mac account in it yet. I would like to get
    Mail working and use it exclusively if I can.
    Any help will be appreciated.
    I-Mac G5   Mac OS
    X (10.4.3)  
    I have the same problem.
    Carried out recent tiger upgrade - software update online- and Mail started to malfunction in the same manner as you describe.
    Previously worked fine.
    Use a mail server at work - no changes there,
    No answer as yet but sympathise.

  • Mavericks 10.9.3.  Can I write a Rule in the Mail app and tell the rule to return an email to the sender?  I have already trsuggestions?

    Mavericks 10.9.3.   MacBook. Can I write a Rule in the Mail app to return an email to Sender?  I have tried many, many times but no luck so far.  Is it even possible, or am I wasting my time?

    There is no specific option to do that, although you can redirect a message if it meets certain criteria. I believe if you wanted to bounce it back to the sender, then you would need an AppleScript to run. If you do some Google or MacUpdate searching you may find an existing script for this purpose.

  • I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me

    I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me

    You will have to call Apple and speak to someone in account security.

  • When I tap the mail icon on my iPhone 4s, the menu of email servers pops up.  I already have a me acct that I check all the time, no problem.  So I choose iCloud, sign in and it tells me that I already have an acct-.so why can't I get to my emails then?

    When I tap the mail icon on my iPhone 4s, the menu of email servers pops up.  I already have a me acct that I check all the time, no problem.  So I choose iCloud, sign in and it tells me that I already have an acct….so why can't I get to my emails then?  I've turned the phone off and on twice....that has fixed it in the past but not this time....

    all fixed ha

  • Hi, the problem of deleting files / videos seeds desktop to go into Terminal and then sudo rm-rf ~ /. Trash Pohangina the answers I've had e of someone in her forum but when I write procedures line in Terminal as the Krever my password and it can not writ

    Hi, the problem of deleting files / videos seeds desktop to go into Terminal and then sudo rm-rf ~ /. Trash Pohangina the answers I've had e of someone in her forum but when I write procedures line in Terminal as the Krever my password and it can not write anything there, I write but nothing comes and my problem is not löst.När I want to delete the movie / video image Frin desktop still arrive Finder wants to make changes.Type your password to allow this. But even that I type my password file / video is left I need help in an easier way or another set-even those on the terminal that I can not type my password to solve the problem Regards Toni

    If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else.
    There are several ways to back up a Mac that isn't fully working. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Re: I need a vi to write an email, including password

    On Sat, 29 Nov 2003 12:11:46 -0600 (CST), Ed Dickens wrote
    on Re: I need a vi to write an email, including password:
    >Unfortuately, all of the VI's in this library are for receiving mail
    >only.
    SMTP, not POP3, is what you need to send email:
    http://www.ni.com/support/labview/toolkits/internet/smtp.htm
    * [email protected] (veuillez supprimer les "X")
    * http://www.astrosurf.com/soubie
    * Au royaume des aveugles, les borgnes sont mal vus... - P.Dac

    Is this a question or a comment?

  • How can I enlarge the email page writting to say 150% for better viewing?

    When I use Yahoo with Interned Explorer, I can enlarge the printed email listing and messages up to 400% which is displayed in the lower right corner of the page. I usually keep it on 150% for easier reading. So how can I set the browser to enlarge the page?

    If you zoom the page then Firefox should remember this.
    In case you are using "Clear history when Firefox closes":
    *do not clear the Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    *http://kb.mozillazine.org/browser.zoom.full
    *http://kb.mozillazine.org/browser.zoom.siteSpecific

  • Can I write in the layout  in any Key figure something else then number ?

    Hi
    (sem - bps)
    Can I write in the layout  in any Key figure something else then number ?
    Let say I want to right in the key figure number with CHAR (the letters a-z)
    Can I do so ?
    Can a key figure  has char other then number ?

    no i can't , because the user want to assign a characteristic ,for example (the layout) :
    0employye  0amount 0project
    P1211111   1000   #
    after the user will assign :
    0employye  0amount 0project
    P1211111   1000   ea-5819
    can the user assign 0project ?
    the current solution i mange to build was :
    a variable with 2 characteristic 0employee & 0project
    and with user exit i move the values to Variable
    ,and in the fox i use substr to split the variable ,
    the code is :
    FUNCTION Z_REFERNCE_RELATION_EMPL_ITER.
    ""Local Interface:
    *"  IMPORTING
    *"     REFERENCE(I_AREA) TYPE  UPC_Y_AREA
    *"     REFERENCE(I_VARIABLE) TYPE  UPC_Y_VARIABLE
    *"     REFERENCE(I_CHANM) TYPE  UPC_Y_CHANM
    *"     REFERENCE(ITO_CHANM) TYPE  UPC_YTO_CHA
    *"  EXPORTING
    *"     REFERENCE(ETO_CHARSEL) TYPE  UPC_YTO_CHARSEL
    CONSTANTS:
      l_source_var TYPE upc_y_variable VALUE 'YPABONUS',
      l_source_area TYPE upc_y_area VALUE 'PAPFMAIN',
      l_use_restricted_values TYPE boole-boole VALUE 'X',
      l_buffer_call TYPE boole-boole VALUE 'X'.
    DATA:
      l_subrc LIKE sy-subrc,
      ls_return LIKE bapiret2,
      l_type LIKE upc_var-vartype,
      lto_varsel_all TYPE upc_yto_charsel,
      lto_varsel TYPE upc_yto_charsel,
      lto_var TYPE upc_yto_charsel,
      lto_chanm TYPE upc_yto_cha.
    * Xth_data os type 'YTH_DATA' (see SE11) .
    TABLES : upc_var_cha_act.
      DATA : wa  TYPE  upc_var_cha_act.
      DATA : my_it2  type table of upc_var_cha_sel,
             my_it3  type table of upc_var_cha_sel,
              wa_1 like line of my_it2,
              wa_3 like line of my_it3,
              wa_2 like line of eto_charsel.
    SELECT  *
       into corresponding fields of table my_it2
      FROM upc_var_cha_sel
      WHERE area EQ 'PAPFMAIN' AND
            var  EQ 'YPABONUS' AND
            varuser EQ sy-uname AND
            chanm EQ '0EMPLOYEE' .
    sort my_it2 by seqno.
    loop at my_it2 into wa_1 .
    clear wa_2.
    move-corresponding wa_1 to wa_2.
    append wa_2 to  eto_charsel.
    endloop.

  • Hi, I need to install Adobe Flash Player because the version I have installed in my Mac Os is old, but I can´t because I need to write my email and my password and I don´t remember my password, so what can I do?

    Hi, I need to install Adobe Flash Player because the version I have installed in my Mac Os is old, but I can´t do it because I need to write my email and my password and I don´t remember my password, so what can I do? Thank you

    The email and password will be the ones for your computer's security, not something for any Adobe product.  You might need to consult Mac customer support if you are unable to determine the required information.

  • I need a vi to write an email, including password

    Hallo,
    I need a vi, with which I can automatically write and send an email. Additionally, the password and user should be asked for and entered in control variables.
    Thanks

    We'll need a bit more information to help you out here.
    Mainly, what type of mail server are you trying to talk to. POP3, IMAP, MSExchange?
    If you have LabVIEW 7, there are some built-in POP3 email vi's that you can use to send mail, but it doesn't look like they can take a user and password.
    Maybe you could use ActiveX calls to your regular mail program if you're in Windows.
    Feed us a bit more info and we should be able to figure something out.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Maybe you are looking for