Can text but not call from abroad

Hi I can text from both of my phones but cannot call from abroad please help xxxxxxxxxxx xxxxxxxxxxxx
[Mod edit: Please do not include personal/private information when making a public post. Thanks!]

Hi ,
Can you text in WIFI or normal signal?
Please call us, we will need to get this looked into.
Thanks.

Similar Messages

  • I can receive texts but not calls from one number

    My wife can send me text messgaes but I cannot receive calls from her. She can hear the dialling tone on her phone when she rings me but I don't get anything, not even a missed call message afterwards. We have both done factory resets on our phones and nothing has changed. We both have iphone 5s. Any ideas much appreciated??

    Quick update here as I got the problem resolved yesterday after talking to the technical department at O2. After my intiial post yesterday I actually discovered that I wasn't receiving any calls from any numbers (not only my wife)! The problem lay with the TuGo app I had installed on my phone which I hadn't used in ages but was still signed in. The person in O2 technical got me to redownload the app and then delete my account. My phone immediately began working as normal and I can receive all my calls. He mentioned that there was a known issue with this app and O2 were working on a fix for it currently. Thanks for your help.

  • CAN RECEIVE BUT NOT SEND FROM SUBACCOUNT-WHY?

    MY MAIN ACCOUNT WORKS FINE.
    HOWEVER, THE SUB ACCOUNT CAN SEND BUT NOT RECEIVE EMAIL

    Thanks for your reply Ernie.... I'm slightly confused as now all is ok!!!??? I haven't been able to send for days now and all is suddenly well and good when I obtain the info for your reply!!! Typical...
    Thanks all the same.

  • How to block text messages but not calls from a specific number

    I want to block text messages from my father but not his phone calls. Is there a way to do this? I have an iPhone 5, but don't want to upgrade to IOS7 yet.
    Thanks!

        You have a fantastic phone, joy3141. I double checked features for the iPhone 5 and confirmed there's not a way to block messages from a specific contact without blocking calls too. Our Call & Message Blocking http://vz.to/MqEgqB is a great way to block unwanted contact from specific numbers, but it would block both calls & messages. If your dad is on your account and you're hoping to block all of his text messages to or from anyone, there is a text message block available at www.vzw.com/serviceblocks you can add to his line.
    Thank you
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

  • Can text but not Video/Audio chat

    I have tried to do video chat with my friend in Japan. It was fine with ADSL usb modem before, but since I changed to ADSL wireless Router, Voyager2091 supplied by BT broadband, I could not get connection. I get "did not respond" message every time... and the Connection doctor says,
    Tried to send UDP SIP "invite" to the following IP addresses and ports:
    218.42.123.91:61787, 192.168.1.3:5060
    Please help me if you have any suggestion...
    We are using "IChat Av 2.1" on both Mac(10.3.9). I am currently connecting with ethernet port(not using wireless) to the router. Firewall is off. I do believe that the new router causes this problem but I have no idea how to fix it.... Is this something to do with setting..? Sorry about it if this is a silly question.
    Thanks a lot for your help.
    jun

    Ok,
    By default most modems and routers are set to give out IP addresses. By default the Mac is set to get an adress that is given out this way (Dynamically).
    If you add a second device and it gives out a DHCP IP address to everything that is connected to it this router will lso pass on previously given out IP addresses from the modem and the MAc gets two IP addresses even though you can only see one.
    IChat get confused by this.
    Some time modems come set in Bridge mode (Pass through) and the problem does not occure.
    Ralph

  • Can send but not receive from .mac using Mail

    I've a problem that pre-dates the mobile me change where the Mail application won't download mail from my .mac account. The most recent email downloaded was from three months ago and since then I have had the tilde character showing next to my .mac account indicating there is a problem.
    I have no problem sending mail from my .mac account, and emails from other non .mac accounts are downloaded without any problem. Webmail is ok - previously in .mac and now in mobile me and until now I've been logging in that way hoping it will resolve itself, but obviously it hasn't done.
    Any help or pointers will be gratefully received.
    Thanks
    Andrew

    Hello,
    All dot.Mac and Dot.Me account have migrated to iCloud.
    You should have been given details of expiry for the .Mac account to iCloud. Apple have now shut .Me and .Mac account for web access.
    Check this discussion which may help. https://discussions.apple.com/thread/3966411?start=0&tstart=0

  • Calling from abroad ( Cyprus )

    Cannot ring the UK on my 4gEE can send a text but not calls got a MTN service provider out here good signal.
    Can't even call EE !!!
    Please help

    Did you enable roaming on your a/c before you left? You may still be able to via your online a/c. Buying a roaming pack doesn't in itself enable roaming.

  • How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

    How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
    I can not change my Apple ID to the old mail (not possible!)
    The old mail don't accept the new password..
    I can not delete the Icloud all the time asking my the password of the old mail!
    I realy need help

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • I need to reset my security questions, but can I  message  support  by text and not call or if you can tell me how to reset my questions here that will be great and I don't have a rescue email.

    I need to reset my security questions, but can I  message  support  by text and not call or if you can tell me how to reset my questions here that will be great and I don't have a rescue email.

    If you've forgotten the answers, you can't do that yourself. Click here, tell the iTunes Store staff that you can't call, and see what they say.
    (109704)

  • I have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

    i have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

    I tyhink that you need ExportPDF, Adobe ExportPDF (read only). In any case, thius may help: Cancel your membership or subscription | Acrobat.com online services

  • HT1430 hey, I just reset my Apple ID and suddenly much of my Iphone text history disappeared.  and I can send texts, but not receive any.  what do I do?  is this related to AppleID, or is the text issue from something else?  thx!

    hey, I just reset my Apple ID and suddenly much of my Iphone text history disappeared.  and I can send texts, but not receive any.  what do I do?  is this related to AppleID, or is the text issue from something else?  thx!

    Hi blyther,
    Thanks for using Apple Support Communities.  If you're unable to receive texts, see this article for troubleshooting steps:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers,
    - Ari

  • How do i delete files in pages, i have some old invoices in pages that i want to delete, i can delete the text but not the whole file, please help. Dennis

    As it say's above i need to delete some of my oldinvoices/estimates from my files in pages, i can get rid of the text but not the whole file, thanks Dennis

    You locate the file in the Finder(it's in the Documents item of the sidebar by default), drag it to the Trash, and empty the Trash.
    (59926)

  • SPA112 - Can receive but not make calls

    I have just setup an SPA112 at home behind a NAT router and have configured it to a state where I can receive but not make calls.
    It registers fine and remains registered.
    The Line 1 Status indicates a State of "invalid" and a Tone of "reorder" when the call fails.
    I believe I have fiddled with the dial plan sufficient to ensure that the number is not being rejected based on it. My current dial plan is as follows:
         (*xx|000S0|0[2-9][69]xxxxxxxS0|[69]xxxxxxxS0|04xxxxxxxxS0|xxxxxxxxxxxx.)
    I have tried with and without an outbound proxy.
    I have attempted to debug the issue, enabling full DEBUG level logging and setting "SIP debug option" to "full", but all I get in the log when making a failed call is the following:
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 18 and str G.729/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 8 and str PCMA/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 0 and str PCMU/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 2 and str G.726/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 100 and str NSE/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 112 and str encaprtp/8000  chan 0
         Jul 23 21:35:29 SPA112 daemon.notice msgswitchd[310]:   MSGSWD RTCP Reqt len 12 Data 2,17,7304,0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.268000] 
         Jul 23 21:35:29 SPA112 kern.warning [17339229.268000]  #### RTP STOP Flag set in this channel break ####
         Jul 23 21:35:29 SPA112 kern.warning [17339229.272000]  ###### sock_sendmsg return 172
    I have been unable to find any information about these warnings on th net.
    I can successfully make calls with soft phones configured with similar settings behind the same router.
    What am I missing?
    Any suggestions appreciated, thanks.

    Thanks for the post.
    To clarify, I have been testing the connection by attempting calls to and from my mobile phone. If I use my mobile to call the number linked to the VOIP account that the SPA112 connects to, the call is received fine and the call works perfectly; I can hear voice at both ends fine.
    If I attempt to call the mobile from the phone behind the SPA112 I immediately get a reorder tone as soon as the number is dialed by the SPA112 (i.e. immediately if it matches a number in the dial plan followed by S0 or after the short wait period otherwise etc.)
    On the other hand, if I use a softphone (I've tried MicroSIP and Blink) I can place calls to the same mobile through the same VOIP account from the same LAN behind the same NAT as the SPA112, and the calls are received and bidirectional voice comms works just fine.
    I'm not sure if I can make calls internal to my LAN with this setup... I only have the one VOIP account, and have no SIP server on the LAN (if that's the right terminology, I'm new to this).
    Unfortunately I'm not sure what you're refering to when you talk about ACL and COR. The topology is very straight forward: the SPA112 (along with a couple of PCs) on a LAN behind a NAT router with an internet connection on the other side. The SPA112 is configured as a DMZ, though I don't believed this had any impact for better or worse. In no test for either SPA112 or softphone have I forwarded any ports or changed any router configuration at all (with the exception of the DMZ).
    So the question is why the softphone can place calls fine, but the SPA112 can only receive calls. The dial plan is an obvious answer, but I'm fairly certain I've ruled this out.
    If someone can tell me how to get more detailed logging out of the SPA112 that would be very useful as well.

  • I set up my iCloud account on iPad with an exchange account and aol account.  I can see exchange and aol emails but not those from .me account or apple email.  I got it to show all 3 accounts on my iPhone with no problem.  Hat am I missing?

    I set up my iCloud account on iPad with an exchange account and aol account.  I can see exchange and aol emails but not those from .me account or apple email.  I got it to show all 3 accounts on my iPhone with no problem.  Hat am I missing?

    I'm having a similar problem, but I do have the key and is not working anyway.
    My old pc was running on windows 7 and my new one is an apple running on Lion.
    My phone is an Iphone IV and I can see all the bookmarks there.
    In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
    But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
    Any suggestions?

  • 2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2

    2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2

    You can look at the ipad under settings, general, about and see if it's 4.3.3.
    Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update.

Maybe you are looking for

  • Can you automatically mirror an image?

    Is there a simple way to create a mirrored image, and I don't mean a hortizontal flip.  I want the front-back flip you get when you hold a book up to a mirror. For example, this is the original image Most tutorials online say use the hortizonal flip.

  • How to make inline format command carry over to subsequent pages

    Using Designer 5.7.  Using inline formatting in the data file (\b. \b0.) to make part of the text bold (Example: bold text bold text regular text).  The problem occurs when the end of page is reached.  The text flows to the next page and if the text

  • Service handling

    hi all, i got a master list of services from client which includes:- Project services Electrical services power house services Fire and safety services boiler services mechanical services Insulation and painting services how to manage all these servi

  • Do we require constraints in Datawarehousing?

    I can understand if we can create the surrogate keys for the dimension tables. Do we require foreign key constraints for the Fact tables. If we dont use the foreign keys what would be the effect during the ETL load. Im maintaining an exception table

  • Web inpector crashes Safari

    Since I upgraded to 3.1.1, the web inspector keeps crashing Safari every time I try to look at the document DOM tree. Specifically: 1) go to google.com (or wherever) 2) cmd-option-I to open the web inspector 3) under "DOCUMENTS" click "www.google.com