Can the Audigy 2 ZS support 2 speakers systems at on

I have my new media center PC set up with the 5. analog system up, running and sounding great. Does anyone know if it is possible to run a second set of speakers (digital speakers via the digital output) at the same time in adjacent room?

Yes you can. The digital output is always working. You can disable the analog outputs and just stay with digital out by clicking on the digital output only checkbox.
But as long as you don't, all outputs will be working.

Similar Messages

  • Can the iBook G4 support photoshop elements 6?  My operating system is upgraded to 10.5.6 but is not on pentium processor.

    Can the iBook G4 support photoshop elements 6?  My operating system has been upgraded to 10.5.6.
    Thanks, Sheila

    I just realized I need 64MB of VRAM for elements 6 and I only have 32MB.  Does that mean elements 6 would not be compatible?

  • Can the AirPort Extreme support more than one printer at a time?

    can the AirPort Extreme support more than one USB printer at a time if it is connected to a USB Hub?

    can the AirPort Extreme support more than one USB printer at a time if it is connected to a USB Hub?
    Yes.....IF.....you use a powered USB hub.
    I have had 3 printers connected at the same time in the past and assume that more would work as long you have a powered hub to support the number of ports that you need.

  • Can the iphone 5 support two headsets for listening to the same music on the phone?

    Can the iphone 5 support two headsets for simultaneous listening to the same music on the phone?

    and it will mute a wired headset when connected to bluetooth
    using a wired splitter will also 1/2 the volume as well you are putting the headsets in parallel giving each only half of the current sendt from the minijack

  • Does the Audigy SE support digital input?

    ) I have an Audigy SE and I was wondering if it supported digital input. I was looking around the recording devices on my computer and I noticed that it said S/PDIF-In on my SB Audigy. I'm planning on connecting my ps3 to to it using optical so I can use my PC speakers without having to constantly switch from PC to ps3 but of course thats only if the audigy se does support digital input.

    Yes it does... but you'll need to purchase a separate Digital I/O module for Digital In (visit creative's site for more details).
    Note:
    If you make use of the Digital I/O module you'll lose your mic/line-in jack

  • Can the iMac G5 supports TWO USB 7-port Hubs??

    Hi all, call me greedy but belive it or not, I am running out of USB ports!!
    I have a Belkin 7-port USB 2.0 Powered Hub (with 2 ports pointing upbright) which serves me very well, but I am running out of ports, now that I am considering getting the new iPod nano.
    Anyway, there are 3 ports behind the screen, now I have my Mighty Mouse, the Hub's USB cable and a HK Soundsticks attached.
    I am thinking of getting another similar 7-port Hub, they are actually stackable, but of course I won't use all 7 ports fully on the 2nd new one.
    Can the iMac supports and substain 2 USB hubs?? I have actually never seen anyone with more than 1 hub??
    Thanks and cheers

    I have two USB hubs attached to my iMac G5 - they are both self-powered (their own power supply); one is a USB 2 with 6 ports and a multi card reader built in and the other my old USB 1 with 4 ports. They are plugged into the rear of my iMac along with the printer. Everything else, including keyboard and mouse, are plugged into the hubs and I am using a total of 8 ports - and everything works. I don't know if that would change if they weren't self powered.
    Hope this helps.

  • Can the dvd player support PAL formatted dvds?

    Hi,
    I'm moving from the States to France, and I'm wondering of the dvd drive supports PAL formatted dvds. If not, is there an easy, user-friendly way to convert from PAL to NTSC?
    Thanks!

    The entertainment industry mafia does not allow commercial DVDs to be "region free". However, a so called "Region 0" DVD can play anywhere, as is the case for most music DVDs. Playing it will not force a region change on the drive. More info on this controversial issue can be [found here|http://en.wikipedia.org/wiki/DVDregioncodes]
    Note also that [the VLC player|http://www.videolan.org> can let you play most, if not all, DVD's directly on your Mac regardless of the region and without causing region changes. It also lets you play video/audio files in a great variety of formats.

  • Can the G4 MDD support internal 1TB hard drives

    Hi all
    I want to add more storage to my G4 Mirror Door. Can my G4 MDD support internal 1TB hard drives? Will I need to buy a PCI hard drive controller card?
    Thanks
    Web dude

    Can you use a larger drive (500GB) on the ATA 66 bus as well as the ATA 100? I have a 750GB on the ATA bus, but have gotten conflicting answers from Mac pros regarding the size drive that will work in the ATA 66 bus. I have a
    Machine Name: Power Mac G4
    Machine Model: PowerMac3,6
    CPU Type: PowerPC G4 (2.1)
    Number Of CPUs: 2
    CPU Speed: 867 MHz
    L2 Cache (per CPU): 256 KB
    L3 Cache (per CPU): 1 MB
    Memory: 1.75 GB
    Bus Speed: 133 MHz
    Boot ROM Version: 4.4.8f2

  • Can the signal of my wireless system be increased somehow?

    can the signal of my airport wireless be increased or boosted

    Hi Dave510,
    If you are concerned about the signal strenght of your Airport Express wireless network, you may find the following articles useful:
    AirPort and Bluetooth: Potential sources of interference
    http://support.apple.com/kb/ht1365
    Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
    http://support.apple.com/kb/ht4145
    Cheers,
    - Brenden

  • Can the 1841 router boot from system image from usbdisk?

    I have a cisco1841 router with 32M CF card installed.
    Now , i want boot a system image larger 32M from usbdisk.
    First  i insert the 128M usb flash disk to the 1841 router and format it, then i can see the device from dir command.
    Second copy the larger ios image from tftp to the usb disk and successed,i can see the image with " dir usbflash0:" command.
    Third  i use this command "boot system " ,but there is no selection of  "usbflash0: "
    Does someone tell me that can the cisco 1841 router  boot the system image from usb disk when reboot the router.
    by the way the  System Bootstrap, Version 12.4(13r)T

    I have test that , the 1841 router can boot from usb disk。
    but there is a problem that when the router reload.
    before the second " program load complete.........................."
    there is about 3 minutes to wait.
    So , the router boot from usb disk take long time than from CF card.
    when use usb disk ,the hole progress of reloading the router will take about 300S.
    It's too long .
    Does something wrong?

  • [845 Series] Can the MSI 6507 support a 200GB hard drive?

    If not can the BIOS be updated so that it can support a disk of this size?

    use Win2k SP4 or WinXP SP1 then you're done.

  • What's the best 2.1 speakers system for music on Qosmio?

    hi.
    i wonder if you guys could give some opinions about the best 2.1 speakers for hearing music on the qosmio laptop.
    did anyone experience Harman Kardon's SoundSticks II ? i'm very curious about their design but never heard the sound that is more important

    Hi
    I dont use any additional little speakers if I want listen to the music.
    In my opinion the Qosmio speakers are good and there is no much difference between Qosmio speakers and a 3rd party 2.1 speakers.
    If you want to have a really good sound quality you should use the S/PDIF jack and connect the notebook to the HiFi.
    This is my suggestion.
    PS: Check this page about the Harman kardon speakers
    http://www.harmankardon.com/product_detail.aspx?cat=MME&prod=SOUNDSTICKSII&sTy pe=PCS

  • Can't find Application Support from System in time machine

    I played minecraft for quite a long while. The thing is, i clean installed mountain lion, and so i backed up. But in time machine folder i couldn't find Machintosh/Libarry/Applications Support and minecraft saved folder is inside =3= can anyone help me. Thanks for helping

    Perhaps the file you are looking for is in your own Library/Application Support? Macintosh/Library/Application Support is the folder for all users. It's quite possible that it was saved there, but I would think a program would store individual user save files in the users's own Library.
    To get there, hold down the Option (alt) key and select Library from the Go menu in Finder.
    Once you have the Application Support Folder open, Enter Time Machine and restore the file from the Minecraft support folder.

  • Edwin? Can the controlbar plugin support SWFs?

    I think it was Edwin that implemented the controlbar plugin, if I recall correctly, so here's an interesting question for him.
    I've tried the controlbar plugin on regular media such as audio or video, and it works as expected. It does not work however when the target is a SWF.
    I undersand that SWFs (in general, outside of the context of the controlbar plugin) need a workaround by setting custom traits on them. I've implemented that workaround and it works fine when the controlbar plugin is NOT involved. When we add the controlbar plugin into the equation, it breaks. So at least we know it's probably due to the implementation of plugin itself.
    I have an update on this:
    For the pause button for example, I get a run-time error that leads me to org.osmf.chrome.widgets.PauseButton, and it's complaining about line 43 having a null object or method. Not sure how to give it what it wants though since the traits should have already been added to the SWF.
    var playable:PlayTrait = media.getTrait(MediaTraitType.PLAY) as PlayTrait;
    playable.pause();
    Any plans to modify the plugin so it can support SWFs equally?
    P.S. I'm available for testing, debugging, whatever if you need me.

    That sounds like you didn't construct the media of  OSMFCongfiguration has not been initialized, so the media is null.
    See "ControlBarPluginSample.as" in ControlbarPluginSample Line 46. and trace from there.
    Ryan

  • Can the Apple TV support more multiple remote apps?

    We just got a new Apple TV and would like to use two different iPhones using different ITunes accounts to control the device through the remote app.  Is is possible?

    The multiple account is only for iTunes store not for Home Sharing :-(
    You still have to use the same ID for all phones that runs the remote app. So my kids have to pair their phone via my account as well. We can't add multiple Home Sharings either, both my kids and my fiance uses iTunes as well and have their own content but they can't access it via the ATV without going in to settings and remove me and login as them self.
    We will try with a common user id to see if that can solve our problem but I guess the new id will not get access to our content in iTunes or we have to share it some how.
    (I have ATV Software 5.1.1 on my ATV)

Maybe you are looking for

  • WAD : Result set is too large; data retrieval restricted by configuration

    Hi All, When trying to execute the web template by giving less restiction we are getting the below error : Result set is too large; data retrieval restricted by configuration Result set too large (758992 cells); data retrieval restricted by configura

  • ITunes 7.7 not playing music

    I have just upgraded from iTunes 7.6 to 7.7, everything worked fine under 7.6 but now in 7.7 my music won't play. I double-click on a song, it has the little speaker beside the song to say it's playing but the progress time doesn't move and no song.

  • I need help trouble shooting my 2 apple TV set up in home.

    I have 2 Apple TVs in my home.  One Gen1 and 1 Gen2.  The gen1 is working fine with home sharing and finding the movies, etc.  But the gen 2 is not showing up in iTunes under devices and I can't get it to pull down the content (movies, songs, etc). 

  • Personal Hotspot goes away, takes forever to get it back, then adds another homegroup each time

    I am out of town and trying to use my personal hotspot.  Ever since I updated to OS 5 I have had this problem.  When I disconnect in windows 7, I can not reconnect withouth messing with settings.  When it does connect it creates a new homegroup so my

  • Abode Reader 11.0.09 will not function on this iMac

    I have Adobe Reader 11.0.09 on an iMac (2009) but it will not read pdf's. An error message comes up which reads "The application 'Adobe Reader' cannot be opened   - 1712" I cannot get into AR to uninstall it. However on a different iMac on my desk AR