Can the AX spoof MAC addresses?

My D-Link router can spoof my system's MAC to my cable modem. Can the AX do something similar? Any help is appreciated.
FYI - I searched this forum and reviewed the AX setup guide and didn't find my answer.
Thanks.

ACgray, Welcome to the discussion area!
No that is not a feature of any of Apple's base stations.

Similar Messages

How can I find my MAC address on macbook pro?

I just bought a new macbook pro with the lion software and can't find my MAC address.

Did you look under the System Preferences > Network > Airport (or Ethernet) > Advanced
The Airport ID or Ethernet ID is your MAC address, depending on which one your using.
You can also use the Terminal
http://osxdaily.com/2008/01/17/how-to-spoof-your-mac-address-in-mac-os-x/

How can i get local MAC address?

How can i get local MAC address or desk ID?
thanks a lot;

How can i get local MAC addressUse the command line command ipconfig or ipconf (depending on o.s.)
or desk ID?Look at the desk and see if it has a number on it.
(Untested as my desk doesn't have an id)
thanks a lot;Your welcome.

How to set the IP and MAC address in C program?

My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
Any idea is welcome! Thanks!

Hi
As a simplest possible solution, you can use the system command
to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
Or you can use the DLPI calls ( do a man DLPI or search for a
Sun documentation on the same at http://soldc.sun.com) to write
a pure C program.
HTH
Shridhar

It there a way to get the wi-fi mac address from an iPad's serial number

our school seems to have misplaced on of it's iPads. I have the serial number listed, but not the wi-fi mac address. our wireless network displays the wi-fi mac address, so the serial number doe snot help me in this instance.
is it possible to get the devices wi-fi mac address if I only have the serial number available?
the school does not have any iTunes account associated with the iPads since they are configured with the apple configurator and pushed down profiles. using this procedure, it is not necessary for the school to assign an apple ID to them.
is here someone whom I can contact for this information?
any assistance will be greatly appreciated.
michael

i have already tried support .. this was my next course of action
Strike 2!
Thank you both for your responces.
also contacted the school's education support rep .. waiting to hear back.
next is Apple direct in California .. have to wait for them .. 8 PST

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

HT5622 We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids? Thank-you

We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
Thank-you

1. Yes, it is.
2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
(103279)

How do you find the phone's mac address for Droid RAZR Maxx HD?

how do you find the phone's mac address for Droid RAZR Maxx HD?

Ann154 wrote:
WalrusM wrote:
how do you find the phone's mac address for Droid RAZR Maxx HD?
It is listed under the advanced options for the WiFi settings or About Phone > Status within the phone's settings
Motorolas list them under About Phone > Status.
Edit: Oh, snap! It is listed in both places. Nevermind! Please excuse!

Can i change the wifi card MAC address in windows 10 /configure/Advanced „Network Address" funktion works?

Many users complained some wifi cards missing the
/configure/Advanced „Network Address” funktion.Without this function
does not work normal MAC adresses which begin for example
„00”.There are many
forums people write about (indignantly)
the problem.
picture here
of what
I mean:
stewx.cba.pl/extend-your-free-wifi-by-spoofing-your-mac-address/
older post more links:
social.technet.microsoft.com/Forums/windows/en-US/8f33667e-ba25-442c-a49b-a3aec79b6cc9/windows-781-can-not-change-the-mac-address-on-wifi-and-cannot-load-login-page-in-public-hotspot?forum=w8itpronetworking
I'm curious about the Windows 10 users
experience with different
wifi cards.
This function working perfectly, all linux platform,Mac,already in android,the old windows XP,windows 2000,
it's a basicthing.This problem affects some reason only are newer Windows platforms and directly the wifi option.

well....it doesn't matter whether the MAC add is 00-14-BF-93-D2-66 or 00:14:BF:932:65 or any other format .. the most important thing is the hex decimal numbers are the same ... so not worry about it...

AEBS and Comcast (can I clone a MAC address?)

I am currently an Earthlink DSL subscriber. I love Earthink, but DSL is giving me all kinds of trouble. Covad owns the lines in my area and they are aweful... in any case...
I am going to switch to Comcast Cable Broadband. I have set up many people in the area with Comcast and a wireless router. It seems that Comcast does not do this everywhere, but in my area they "bind" to the MAC address of the NIC that you use to setup the connection (MAC Address Authentication).
If I want to use NAT on my router, it will not work unless I can spoof the MAC address. This is easily done with a Netgear or Linksys router. This does not seem to be a setting in the Airport Admin Utility.
Is there a hidden setting or a third party utility that I can use for spoofing the WAN MAC address on my Airport Extreme Base Station?
I could switch to a different wireless router or put a small router between my Cable modem and the AEBS, but I would rather not add a layer of hardware or switch hardware if I don't have to (I really like my AEBS).
Thanks for any advice.
WT

It should be possible, if manual registration of the MAC address of connected equipment is required on Comcast's service in your area, to get them to either clear the binding to allow a new device (ie the Base Station) to associate with the connection, or to ask them to manually register the MAC address of the Base Station's WAN port. I realize you would rather not have to deal with Comcast's tech support people, but (as pointed out above) the only other option is to use a different wireless router that does support MAC address cloning.

Can i capture wireless mac addresses?

I need to provide our security group the mac address of all devices with wireless capabilities. can this be done? the mac addresses I am able to easily report on is the ethernet nic rather than the wireless nic.

mrhic wrote:
> I need to provide our security group the mac address of all devices with
> wireless capabilities. can this be done? the mac addresses I am able
> to easily report on is the ethernet nic rather than the wireless nic.
>
>
BTW, they ask for the impossible, as anyone can plug in a USB FiFi
adapter - or tether their Blackberry - or ... so hopefflly they will not
be overly picky.
Sort of... there isn't a hardware category for wireless NICs. However
most of the descriptions include the word "wireless" so you can create a
custom report as follows:
Reports-->Inventory Custom Reports-->Hardware Components-->New
Then enter a Name for the report, select Type = Hardware Components,
selecy Focus = LAN Adapter. Hit Continue.
In the Criteria section [+] add a criteria
[Product Name] [contains] wireless
To be more specific, take a look at the descriptions returned without
any critera, and add any oddballs using OR grouping, so if a specific
model or the word "WiFi" appears - whatwever - you can catch it.
Finally select the report columns as needed.
Run.
We notice that on machines where the WLAN can be disabled, the MAC
address is absent ( because at the time of the inventory, there is no
wireless NIC active, but the enumeration of HW show one. ) However, you
will still "know" there is a wireless NIC.
Report looks like:
Atheros Communications Wireless LAN Adapter AR5212 802.11abg FOOUSER
F00F00F00482 127.0.0.1 255.0.0.0 1
Intel Corporation PRO/Wireless LAN 3945ABG FOO2USER F00F00F00D6C
192.168.1.41 255.255.255.0 1
Intel Corporation PRO/Wireless LAN 3945ABG ANOTHERFOO ( no MAC )
( Works, but I would certainly vote for a more easily to get at
category, same for broadband interfaces. )
-- Bob
Bob Mahar | Work in education?
Novell Knowledge Partner | http://novell.com/ttp
- - - - - - - - - - | - - - - - - - -
Programming is like teaching | http://twitter.com/BobMahar
a jellyfish to build a house | http://vimeo.com/boborama

How can I import my .mac address book from online to my computer?

My macbook was stolen last week, and I am now using an older iBook that we had, but I haven't been able to retrieve my mail address book from the backups I was making. I have most of the contacts in my address book when using .mac web-based email, but not on my computer. I am afraid to turn on syncing because I don't want my computer to erase all the addresses stored online. How can I reverse sync, and get my online address book to import to my computer?
Thanks.

go to 'system prefernces > .Mac > advanced > reset sync data'
Then choose to replace everything on your compu with .Mac data. (Back up before you begin! or is there really nothing to back up, then don't bother of course)

Can't add new MAC address to MAC ACL on Airport Express

Hi,
I just recently got a new iPhone 3GS. When I logged into my Airport Express to add it's MAC address to the ACL I found that the + icon was greyed out. I can modify old MAC addresses in the list and delete addresses, but I can't add new ones. Anyone have any idea why this might be the case. It seems like I can modify all other settings without any problems. I restarted the basestation, no help. I also even reset the password just incase, as you might expect that didn't help either. Any thoughts? Thanks.
Setup:
WDS with 2 other access points
Mac Address Access Control set to "Local"

If you are configuring the router as MGCP, you do not enter the mac address, just the router name.

Stolen black mac book how can i get my mac address

had my black 13 inch mac book stolen while visiting inlaws. we know who took it but need proof. filed a police report and gave serial number but need some way or tracking the computer..dont know what if any tracking capabilities the system had on it. and how can I find the Mac address for the laptop...any help would be great ....thanks
Derek..
<Edited By Host>

Yea the serial number will help if it ever gets pawned or found..but thats if she pawns it...what I need I someway of seeing the computer pop up in her town as she the main suspect and the only one who lives in that town..I do have the original box (never throw anything away drives my wife nuts) what does the number look like? and where would it be located on the box..??thanks for the help so far....

Spoof Mac Address

Hello
I am trying to replace my Linksys router with the time capsule.
The problem is that I have a static IP so I need to provide the ISP with it to approve it.
This usually takes a long time to get.
Is there a way to do this on time capsule. ie: mac address spoofing?
thanks

Sorry, but unlike the Linksys routers, the AirPorts do not offer a MAC spoofing/cloning feature.

Can the AX spoof MAC addresses?

Similar Messages

Maybe you are looking for