Can the Extension Builder be Used to Modify Existing InDesign Menus and Panels

Hi,
I am using the CS5 SDK to create new panels and menus for InDesign.
I would like to know if there is a way to modify InDesign's existing native panels and menues. For example, I might want to display additional information about assets in a Library panel.
TIA,
mlavie

Sorry, no direct way. You could theoretically build your own panel and then supercede the menu for ID's panel. Nobody's tried it that I know of; and, frankly, I wouldn't recommend it as it could easily break something in ID.
Bob

Similar Messages

Can the same name be used for both an iCal calendar and reminder list?

In iCal, I have a Reminder list named "Home". I have been trying to also give a Calendar the name "Home", but iCal does not seem to want me to do this. When I try to use the name Home for a Calendar, it changes it to the name "Home C" (a name that I gave it when I couldn't get it to let me use "Home"). Is this a restriction within iCal? I have iCal synched with iCloud, which in turns syncs with an app called 2Do on my iPhone. I am not sure if that may be part of the problem.

Yes, it can
Stedman

Can an extension cord be used in the operation of an iPad?

Can an extension cord be used in the operation of an iPad?

VIP folder?
it's where you can put mail from people that you want to get sooner or in a singular place instead of mixed in with everything else.
If you get a lot of mail, it may be useful, if not, then just something you can ignore.

Where is the Extension Builder download?

Amazingly, I can't find from where to download the Extension Builder installer. What is the URL for the page from which I can download it

Going through the below advice I hope there is a way to build a extension using flash builder.
If you haven't already, take a look at the freely available CS SDK - you can build extensions with the free Flex SDK - or with Flash Builder (though, of course, you will not benefit on some of the accelerator tooling that Extension Builder provides).
Can you please brief me how to achieve this so that I can have my output as .ZXP to install it in extension manger.
Thanks

No connection to the Integration Builder while using ABAP Proxies

Hi All,
Here am getting an error when i say SPROXY in R3 system.
No connection to the Integration Builder while using ABAP Proxies.
For this i have gone through the blog no 3022.
and i did all the connection.And then i have gone through the steps
Go to---->test connection steps.I added the address called com.sap.aii.server.name.repository in SPROXSET table.
and i run the Tcode SPROXY.Now am getting into DUMP when is say SPROXY.
And also i run a program called SPROX_CHECK_IFR_ADDRESS to add the address
but i didn't found the path for Excahnge Profile it was disable.
and later i run a program SPROX_CHECK_IFR_CONNECTION
now it went into DUMP.
Can Anyone suggest me how to fix this error.
Thanks,
Kalyan.

hi kalyan
1)check whether your R/3 system is based on WEBAS 640 or WEBAS620 (if it is on WEBAS 620 you need to install xi ADD ON,if on WEBAS 640 no need)
2)check the report SPROX_CHECK_IFR_ADDRESS
The address is taken the from following parameters in the exchange profile (section 'connections'):
http://server:port/exchangeProfile --> Connection
com.sap.aii.connect.repository.name: Server (e.g. pwdf0436)
com.sap.aii.connect.repository.httpport: Port (e.g. 1080)
com.sap.aii.connect.repository.contextroot: Root (e.g. rep)
Furthermore, the logon data is also read from the exchange profile(section 'ApplicationSystem'):
com.sap.aii.applicationsystem.serviceuser.name: User
com.sap.aii.applicationsystem.serviceuser.pwd: Password
rgrds
kummari

Can the format of a SQL Statement modify the execution time of an SQL ....

Can the format of a SQL Statement modify the execution time of an SQL statement?
Thanks in advance

It depends on:
1) What oracle version are you using
2) What do you mean for "format"
For example: if you're on Oracle9i and changing format means changing the order of the tables in the FROM clause and you're using Rule Based Optimizer then the execution plan and the execution time can be very different...
Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2009/12/29/estrarre-i-dati-in-formato-xml-da-sql/]

External USB not recognized on my iMac (intel) in Disk Utility, Finder as well as in Terminal diskutil list but is listed in System Profile, which includes the location ID of 0xfa400000 / 5. Can the location ID be used to restore USB identity ?

My 1TB Seagate external USB not recognized by my iMac (intel) in Disk Utility, nor in Finder as well as in Terminal "diskutil list" but it is listed within the System Profile, which includes the location ID of 0xfa400000 / 5. Can the location ID be used to restore the identity of my external USB ?

Hello JNotorious,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
Have a nice day,
Mario

HT204158 Can the Smart Cover be used to support the ipad in the vertical position?

Can the Smart Cover be used to support the ipad in the upright vertical position?

It can, but its not very secure, and only in a completely vertical position i.e 90 degrees.

HT1178 Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive

Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive. If so what software do I need to buy?

Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive.
Yes, on XP, Vista and 7. Have not tried 8.
If so what software do I need to buy?
Genie Timeline Pro does a very nice job...and it is similar to Apple's Time Machine. It's not cheap though. Check with the Genie folks for more info and compatibility with Windows 8.
Genie Timeline Pro | Overview | Time Machine Backup Software for ...
Other users may have some other suggestions.

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
Thank you for your time.

If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

Can the Acrobat SDK be used to turn off protected mode(Sandboxing mode)?

Can the Acrobat SDK be used to turn off protected mode(Sandboxing mode)?

At times there also seem to be some issues with saving to a network link. When this happens, try saving locally and see if that does the job. Try working on the document locally and see if the issue goes away. If so, then you are dealing with a more complex issue involving networks. Unfortunately, I do not have a solution in that case, but it might be helpful to know if that is the issue.

When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank

HT2494 Can the headphone port be used as Mic-In? Can it be switched in settings of the Mac to Mic-in?

Can the headphone port be used as Mic-In? Can it be switched in settings of the Mac to Mic-in?
Same question for Macbook Pro (particularly 2010 13" edition).

what about the new iMac?
I use mic only when working in Sony Vegas and other Sony programs. I'd like to know if I can use proessional Mic with the new iMac and with the old Macbook Pro, probably by connecting it through audio-in port, maybe there is a way to transform it through the settings on the Mac into Mic-in?
If not, then my question is can I otherways use a professional Mic staying in Windows through Bootcamp on a Mac? And the most important - the new iMac, cause that happens to be the only question that stands before me and buying the new iMac.
Maybe I'm a little bit lame in all this stuff, because I'm used to use Windows-based computers to work with audio, but I didnt really understand what all that preamp and Line ment. I know that Line is a super-quality of the sound, guess thats possible to produce only in studios, not even with an extra good Shure mic at home. Or maybe you've been meaning smth else. If you could explane me everything in more easy and detailed way - I would be grateful.

Can the camera connector be used with nano 1st gen

As subject states, can the camera connector be used with the Nano??
Many thanks!!

The camera connector cannot be used with the iPod
nano; it is only compatible with the iPod photo, iPod
with color display, and Fifth Generation iPods out of
those released so far.
(16782)
Ok thanks, but the Nano does have a Does a colour screen and can also store photos.
Not that i dissagree with what your saying, its just strange!

Can the time capsule be used as both a time machine backup and NAS storage

Can the time capsule be used as both a time machine backup and NAS storage? I want to use the drive as external, wireless storage for all of my files so all my PCs, MACs and iOS devices can access the files. Plus, I want to use the drive for backing up my iMac via time machine. Can the time capsule device be used for both these purposes simultaneously? If not, are the other suggestions on how I can do this?

Can the time capsule device be used for both these purposes simultaneously?
It can, but is really not recommended. Sooner or later there will be a fight for space on the drive between Time Machine and the other files.
If you have plenty of free space on the drive, you can do this......but.....have you thought about how you will back up the "other" files that are stored on the Time Capsule?

Can the Extension Builder be Used to Modify Existing InDesign Menus and Panels

Similar Messages

Maybe you are looking for