Can the Read Out Loud tool read tooltips?

Hello,
I have created a PDF with a text form field where the user will enter his/her name and then print a course completion certificate.  I have named the text form field and added a tooltip.
1.  It looks fine in Form Edit mode but there is text that looks like it's behind the tool tip.  It is different words than the tooltip and larger font size.  I can't remember how I got that text there.  I just wanted to edit it a little bit but can't find where to do so.  Any suggestions?
2.  I have made this form accessibile but is there a way to have the Read Out Loud tool actually read the tooltips?
3.  Also, how do I add a screen shot to this discussion?
Thanks!

Any suggestions on this one?
Thanks.

Similar Messages

  • I have moved to the country where my internet speed is slow.  I am running some auto updates that keep timing out half way through.  Can the time out be shut off to complete the update?

    I have moved to the country where my internet speed is slow.  I am running some auto updates that keep timing out half way through.  Can the time out be shut off to complete the update?

    bondod wrote:
    Can the time out be shut off to complete the update?
    I'm not sure about that. But what you could try is to set the Update Preference to "Manual" and try updating at a time when the Network may not be as busy, like late at night or early in the morning. 
    Just an idea.

  • Can the pc out of subnet ,but in the same LAN receive video stream?

    Can the pc out of subnet ,but in the same LAN receive video stream?
    In the LAN ,the host set the Transmit IP such as 10.13.22.255, all the pc' IP address from 10.13.22.1 to 10.13.22.255 can received the video stream.
    but how can the pc out of this subnet, such as with IP 10.14.14.22 receive it.
    Thanks a lot for advance.
    Myshen

    does anyone know?
    help me please.
    Thanks very much!
    Myshen

  • Can the reader sort a list themselves on the site?

    Hi all,
    I have a list of publications. For example:
    Bach, P., Bayliss, A.P., Tipper, S.P. (2011). The predictive mirror: interactions of mirror and affordance processes during action observation. Psychonomic Bulletin & Review, 18(1), 171-6.
    Tipper, S.P. & Bach, P. (2008). Your own actions influence how you perceive other persons: a misattribution of action appraisals. Journal of Experimental Social Psychology. 44, (4), 1082-1090.
    Hudson, M., Hong-Liu, C. & Jellema, T. (2009). Anticipating intentional actions: The effect of eye gaze direction on the judgment of head rotation. Cognition. 112, 423-434. DOI: 10.1016/j.cognition.2009.06.011.
    I would like the reader of the site to have the choice of sorting the list by one of five variables: First author alphabetical, Lab member alphabetical (in bold), year (in brackets), Article name (underlined), Journal (italics).
    This is the same function as on Amazon, where you are able to sort your search results by Price, Book name etc.
    Is this possible in Dreamweaver? Can anyone tell me or point me in the right direction?
    Thanks for any help you can give.
    Matt

    HTML alone can't do what you want. 
    You would need a database for the content & categories.  And scripts to sort the data output by various criteria (author, title, etc...).
    The type of database and scripts you would use depend on your server.  Linux servers typically support MySql & PHP while Windows servers mainly support MSSql and ASP or ASP.net.
    Nancy O.

  • Can the process multiple pictures tool work with the divide scanned pictures tool?

    A friend scanned a few dozen photo's & asked me to make them into a  slide show.  The problem is that the 4x6 photos were scanned onto A4 size & not put squarely onto the scanner.  This means that the pictures are not only at the wrong angle but all have to be rotated. to different degree.
    I know that I can use the divide scanned photos tool to crop them one at a time.  Is there any way to use the process multiple picture to do all pf these pictures in one batch & perhaps have it also do an autofix at the same time?

  • Can the time out for loading a page be extended for busy sites?

    (Error:)
    Problem loading page
    The connection has timed out
    The server at xxx.xxx is taking too long to respond.
    * The site could be temporarily unavailable or too busy. Try again in a few moments.
    Question: Is there a way to extend the time out for sites which are known to be busy?

    This issue appears under two different Mozzila "Questions". Both appear to have the same OUTDATED, INEFFECTIVE ANSWERS. A lot of us are on WIN7 now and still have erratic network speeds due to cable multiplexing -- but have been trained to leave the registry alone. Has not anyone solved this problem -- other than going notoriously unreliable FIOS ??

  • How do I get the phone to stop saying the words out loud as I text them?

    How do I get the phone to stop saying the words I text outloud as I text them?

    Settings > General > Accessibility > Voice Over

  • Voyager opens and reads text messages out loud

    My daughter's Voyager has started opening her text messages automatically when they are received, and then it proceeds to read the message out loud.  She can't figure out how to stop this from happening!  Any help in stopping this incredibly annoying situation would be greatly appreciated.

    Never mind - I think I fixed it for her. 

  • Can I get turn by turn directions said out loud?

    Iuse my iphone in the car to play music and I like the maps app.  I was lost recently and tried to use my phone for directions.  I pulled over and put the place in, and started driving.  The phoner would not say the directions out loud.  Driving and looking down at directions was too dangerous and seemed counterproductive.  Is there a way to make the directions app say turn by turn directions or is there another app for that?

    You would need to purchase one of the several navigation programs available in the App Store. They basically turn your iPhone into a sat-nav device.
    I personally use MotionX GPS Drive, and I am very happy with its performance.

  • Can the new ipod nano be connected to a dock?

    I recently just got the 7th gen Ipod Nano and I was wondering if it can go onto a dock and if it can be played out loud without a dock or headphones.?

    Yes, buy the lightning-to-30-pin-adapter in an apple store. And Ipod nano does not have a built-in speaker, so it will not play out loud without a dock or headphones.

  • Siri stopped talking out loud.  Text only.  Anyone know what could have happened?

    Siri stopped talking out loud on my iPad Mini.   Anyone know why?  Only thing I had done not long before I noticed this was use speakers.

    All other sounds work.  If I use Google and ask a question, it takes me to the website and also reads the answer out loud.  It is only Siri that does not speak anymore.  Settings are correct....ON for Siri and always just as you show.  No sound problems anywhere else...all aps have sound, etc.

  • Can the red leather smart cover discolour the screen for good

    can the read leather smart cases discolour your screen for good because my screen looks quite red until i give it a few wipes im worried it will become red for good i have put 2 specsavers cloethes between the screen and the cover will that stop it from colouring any further has anyone used the red leather smart cover for a long time and how has it effected the screen i dont want my ipad 3 screen ruined because i bought the exspensive smart cover over the plastic one

    No.   The screen is glass.

  • How can I get "Read Out Loud" to read a calander properly for the blind?

    I create a monthly newsletter for a place that has a traditional calendar along with it.  One of the people this newsletter goes to is blind and uses a screen reader to read it out loud.  I also discovered Adobe Reader can also do this.  Unfortunately, both methods do not seem to understand how a calendar is read.  Each day on the calendar has several events written into each.  So when it reads, it goes from left to right with first reading the numbers of the day, then reading the first line of events all the way across, then second, third, etc... the will read the next row of day numbers along with the events, etc...  Of course I want it to read the single day number with the events next, then the next day number and events, etc...  I use InDesign to create everything if that helps at all.  Is there any way to create this PDF so a reader will read it properly?

    Hi,
    Acrobat's ROL, while I find it very useful, is limited.
    After all, it is not a "AT" caliber text reader.
    It "reads" PDF page content left to right --- period.
    It has no recognition of the logical hierarchy or structure of a PDF's content.
    Consequently, what you've described is pretty much all you get.
    For AT (JAWS, Windows Eyes, NVDA, etc.) to "work" a PDF properly the PDF must come from an authoring application that supports Tag management for the Tagged output PDF.
    The authoring file content must be mastered in a manner that supports a Tagged output PDF that complies with ISO 32000-1:2008 (The ISO Standard for PDF).
    (Available via: http://www.acrobatusers.com/blogs/leonardr/adobe-posts-free-iso-32000  )
    This is particularly true for tables.
    Typically, "calendars" available for MS Word, other word processors or page layout applications usage are "layout" tables and as such will not provide an accessible table in a Tagged PDF.
    A calendar, built as a data table such that it had a header row with header cells, a table body with data rows of data cells, etc,. could be the source content for a correctly built <Table> in PDF.
    Such a table can be processed by AT (via appropriate keyboard commands) to permit understanding of the "who-what-why-..." of the table.
    With an appropriate table description, you'd have an AT "usable" calender.
    The calendar could be mastered in MS Word.
    Conversion to PDF via Adobe PDFMaker or Office 2007's Save-As to PDF (with accessibility option selected) result in well-formed Tagged PDF.
    n.b., Regardless of which may be used - be sure you've processed all available updates (Adobe's or Microsoft's) - it makes a difference.
    From viewing InDesign/Accessibility eSeminars provided by Adobe I believe you can master tables the will be well-formed <Table> & child elements with InDesign. Until InDesign / FrameMaker get a make over <TH> Scope will still have to be done manually with Acrobat Pro.
    If you have complex tables that warrent use of ID and Header you will want to use Acrobat 9 as the task is easier with it.
    Some reference sources that can be informative and useful:
    Duff Johnson's article "It "sounded" like a good idea at the time" (about Read Outloud)
    http://www.acrobatusers.com/blogs/duffjohnson/it-sounded-good-idea-time
    Duff Johnson's recorded eSeminar: "Tech Talk: Making PDF files comply with Section 508"
    http://adobechats.adobe.acrobat.com/p45245327/
    Charlie Pike's recorded eSeminar: "Accessibility"
    http://adobechats.adobe.acrobat.com/p51087250/
    Some InDesign specific resources are given in the second to last post in this thread at the AUC:
    http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=15622
    Be well...

  • Can the ipad read a book out loud like the kindle?

    can the ipad read a book out loud like the kindle?

    Hey mdm30!
    There is a feature in iOS 7 called VoiceOver that can accomplish the action you desire, and here is a link with more information about that feature:
    VoiceOver - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad9a246898
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • How can I get read out loud to work on MAC for adobe reader?

    Having trouble getting the read out loud function to work on MAC.  It keeps says "BLANK" or "Warning Page Empty".  How can i get this resolved my the read out loud function to work properly?

    That depends.
    First, be sure the pdf isn't just scanned images. Can you select individual words with the select tool? If not, you would need to use a tool to run OCR before it can be read.

Maybe you are looking for

  • Adobe Photoshop CS6 Extended on a Mac i5

    I installed the trial version of Adobe Photoshop CS6 Extended on my Mac i5 and it installed as Abobe Photoshop CS6? (the standard version) I have tried everything but haven't been able to come up with an answer.

  • Airport in Bridge mode "not a supported format." Are you F'n kidding me?

    Forgive me if I'm freakin' a bit but I am at my wits end with Apple. Here's the breakdown. Fiber DSL into a standard wired 4 port D-Link router. Router is connected to HP 24 port switch because the D-Link does not have enough ports for my house. Swit

  • Remove log in password

    I have just updated to yosmite and in the setup it puts a password in to open your mac. I would like to know how to remove this please.

  • Problem while uploading FF_5

    Hello, We are uploading the bank file using FF_5. when we upload the file the file is getting uploaded but showing error message difference is to large for clearing. When we check in FEBA the items in files are displayes as TO BE POSTED. Can any one

  • Can I replace the speaker after water damage?

    A couple days ago I spilled tea on my keyboard. I kept the computer in a bag of rice for 2 days and everything is working fine .. except for the sound. With or without speakers, when I press the sound button there is a small circle with a dash in it