Can the WCF-OracleDB adapter generate 'nill' attribute for DBNull result on inbound operation?

When a result set is returned using a REF CURSOR, DBNull values are omitted from the XML. Is it possible to change that behavior to write the element as 'nil'? 
Thanks,
Brad

Pleaes refer to the document which might helpfull:
http://coditblog.webs.be/category/BizTalk.aspx?page=2

Similar Messages

  • Does WCF-OracleDB adapter support XMLType data for table select operation

    I am getting this error When I do the consume adapter service for Oracle table select operation on one of the tables which has XMLType column. It's working fine for other tables. 
    Microsoft.ServiceModel.Channels.Common.MetadataException: Retrieval of Operation Metadata has failed while building WSDL at 'http://Microsoft.LobServices.OracleDB/2007/03/XXXX/Table/table_name/Select' ---> Microsoft.ServiceModel.Channels.Common.MetadataException:
    Incorrect Type: XMLTYPE. Possible causes: 1. Permission issue 2. Unsupported type.
       at Microsoft.Adapters.OracleDB.OracleCommonMetadataResolverHandler.ResolveTypeMetadata(String nodeId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
       at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetTypeMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
       at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetTypeDefinition(String typeId, TimeSpan timeout)
       at Microsoft.Adapters.OracleDB.OracleCommonMetadataResolverHandler.ResolveTypeMetadata(String nodeId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
       at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetTypeMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
       at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetTypeDefinition(String typeId, TimeSpan timeout)
       at Microsoft.Adapters.OracleDB.OracleCommonMetadataResolverHandler.ResolveOperationMetadata(String operationId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
       at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetOperationMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
       at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.SearchBrowseNodes(MetadataRetrievalNode[] nodes, WsdlBuilderHelper helper, TimeoutHelper timeoutHelper)
       --- End of inner exception stack trace ---
    Server stack trace: 
       at Microsoft.ServiceModel.Channels.Common.Design.AdapterExceptions.ThrowMetadataException(String errorMessage, Object arg, Object source, Exception innerException)
       at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.SearchBrowseNodes(MetadataRetrievalNode[] nodes, WsdlBuilderHelper helper, TimeoutHelper timeoutHelper)
       at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.GenerateOperationSchemas(WsdlBuilderHelper helper, MetadataRetrievalNode[] nodes, TimeSpan timeout)
       at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.GetWsdl(MetadataRetrievalNode[] nodes, Uri uri, TimeSpan timeout)
       at Microsoft.Adapters.OracleCommon.OracleCommonWsdlRetrieval.Microsoft.ServiceModel.Channels.Common.IWsdlRetrieval.GetWsdl(MetadataRetrievalNode[] nodes, Uri uri, TimeSpan timeout)
       at Microsoft.ServiceModel.Channels.Common.Design.MetadataExchanger.ProcessMetadataGet(Message message, Uri target, TimeSpan timeout, MetadataLookup metadataLookup)
       at Microsoft.ServiceModel.Channels.Common.Design.MetadataExchanger.ProcessMetadataMessage(Message message, Uri target, TimeSpan timeout, MetadataLookup metadataLookup, Message& replyMessage)
       at Microsoft.ServiceModel.Channels.Common.Channels.AdapterRequestChannel.Request(Message message, TimeSpan timeout)
       at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.ServiceModel.Channels.IMetadataRetrievalContract.GetMetadata(MetadataRetrievalNode[] nodes)
       at Microsoft.ServiceModel.Channels.Tools.MetadataSearchBrowse.MetadataPanel.GetWsdl(MetadataRetrievalNode[] nodes)
       at Microsoft.ServiceModel.Channels.Tools.MetadataSearchBrowse.MetadataPanel.btnProperties_Click(Object sender, EventArgs 
    My table has XMLType column which is also included for select.
    Thanks

    Hi Van&boatseller,
    The duplicate thread has been deleted, and thanks for your feedback.
    Best regards
    Angie Xu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Custom headers are not exported correctly in the bindings for the WCF-WebHttp adapter

    I have an annoying issue with the bindings for the WCF-WebHttp adapter.
    As you know, the "Messages" tab of the WCF-WebHttp transport properties enables a developer to configure a number of static outbound HTTP headers. When I've entered two or more headers in the textbox, the CRLF between individual headers will be
    stripped after a bindings import. This means I cannot call RESTful services that require more than one custom HTTP header in a messaging-only scenario, because BizTalk goofs up the configuration.
    For example, when I enter the following headers in the textbox:
    Then export the bindings, and immediately import the bindings again (untouched), the textbox now shows:
    I did some brief analysis, and within the binding file's XML, the HttpHeaders property (contained in the TransportTypeData element) is not encoded/escaped in any way, so therefore the significant whitespace (in this case CRLF) that needs to be preserved
    is lost in the import process.
    Can anyone reproduce this and can anyone think of a workaround (without resorting to an orchestration)?

    I did some brief analysis, and within the binding file's XML, the HttpHeaders property (contained in the TransportTypeData element) is not encoded/escaped in any way, so therefore the significant whitespace (in this case CRLF) that needs to be preserved
    is lost in the import process.
    +1

  • BizTalk 2010 wcf-oracledb adapter with Oracle Database 12c

    Hi,
    My customer is currently running BizTalk 2010 adapter pack wcf-oracledb with Oracle 11g.
    They want to upgrade the oracle database to 12c.
    Is it possible to use BizTalk 2010 wcf-oracledb adapter with Oracle 12c?
    Thank you.
    br, Johan

    Hi,
    No it is not supported.
    For the Oracle Database Adapter
    Supported server versions: Oracle database version 11.1, Oracle database version 10.2, Oracle database version 10.1, Oracle database version 9.2
    Supported client versions: Oracle Data Access Components for Oracle Client 11.1.0.6 with Patch Set 11.1.0.7, Oracle Data Access Components for Oracle Client 11.1.0.7
    Refer:
    Microsoft BizTalk Adapter Pack 2010 Documentation
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Can the output of a Generate Occurrence be passed in Local/Global Variable?

    Can the output of a Generate Occurrence function, which is a refnum, be passed in Local/Global Variable so that it does not need to be wired to all parties directly?
    Can more than one party be waiting on the same Occurrence and will all waiting function be released together?

    dbaechtel wrote:
    Answer was not given:
    Can the output of a Generate Occurrence function, which is a refnum, be passed in Local/Global Variable so that it does not need to be wired to all parties directly? Is this possible?
    I am not worried about whether it is bad form or not, as yet. That is for me to decide on a case by case basis.
    Yikes! That is not a very good way to learn.
    Anyways, to avoid any more bold emphasis on words, I will answer your question. Locals can only be linked to controls/indicators not individual wires. If you want to get the effect of a local/global variable with a wire value, search the forum for action engines or functional globals. Those will work for passing a wire value between threads.
    That said, what are you trying to use occurences for? There may be (and probably is) a more accepted way to implement what you are trying to do instead of using local variables
    CLA, LabVIEW Versions 2010-2013

  • HT5622 We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids? Thank-you

    We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
    Thank-you

    1. Yes, it is.
    2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
    (103279)

  • My htc-phone provides internet facility through cable/blue-tooth to my windows notebook. It does not have a wifi or hotspot facility.  Can the same internet through blue-tooth work for ipad2.

    My htc-phone provides internet facility through cable/blue-tooth to my windows notebook. My htc-phone does not have a wifi or hotspot facility.  Can the same internet through blue-tooth work for ipad2?

    No, the bluetooth profile in the iPad does not provide that
    capacity. Can your netbook be a wifi transmitter? If yes,
    you can connect to the internet via htc-phone and pass
    the connection to the netbook which will connect via wifi
    to iPad. I am not familiar with the hardware in netbooks nor
    the capabilities of Windows, so what I am suggesting looks
    good in theory but the reality may not allow it. Still worth
    checking into.

  • Adapter-specific message attributes for the JMS Receiver adapter

    Dear SAP Community,
    We are trying to activate some parameters at message level when SAP XI sent an interface (XML data) to IBM Websphere MQ. Programmaticaly, this is done the following way:
           TextMessage outMessage = session.createTextMessage();
           MQQueue replyToQ = new MQQueue("TESTQM01","SYSTEM.ADMIN.ACTIVITY.QUEUE");
           Destination replyTo = (Destination) replyToQ;
           outMessage.setJMSReplyTo(replyTo);
           outMessage.setIntProperty("JMS_IBM_Report_Exception", MQC.MQRO_EXCEPTION);
           outMessage.setIntProperty("JMS_IBM_Report_Expiration", MQC.MQRO_EXPIRATION);;
           outMessage.setIntProperty("JMS_IBM_Report_COA", MQC.MQRO_COA);
           outMessage.setIntProperty("JMS_IBM_Report_COD", MQC.MQRO_COD);
           outMessage.setIntProperty("JMS_IBM_Report_Discard_Msg", MQC.MQRO_DISCARD_MSG);
    This code is working fine.
    Since the documentation about this feature (Adapter-specific message attributes) is very light, We am not sure about the interpretation we made.
    First, we defined the following attributes: MS_IBM_Report_Exception, JMS_IBM_Report_Expiration, JMS_IBM_Report_COA, JMS_IBM_Report_COD, JMS_IBM_Report_Discard_Msg. All of them are with type int.
    Then we changed the mapping (XSL) to pass the value to the dynamic configuration, using the technical names (DCJMSMessageProperty0, ..., DCJMSMessageProperty4) and the value of the constants. We also specified a value in the Reply To Queue parameter of the adapter. As a test, We also change another parameter via the mapping (the correlation ID, to use the idoc number) and according to the log of the processed message, every thing is finde. According to the trace of the JMS adapter, everything is fine to. However, this has no impact on the message, only the correlation ID is changed.
    The JMS server is IBM Websphere MQ (v6.0.2.1). It is already in production and working fine. This is a change we have been asked to implement.
    Has anyone experience with the JMS receiver adapter-specific message attrbitutes ? What have we done wrong ?
    Any help is greatly appreciated.
    Regards,
    Gregory PFISTER
    SAP XI Analyst - Holcim

    Hi Neha,
    pls do chk the below links for SOAP adapter message attributes
    http://help.sap.com/saphelp_nwpi71/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/content.htm
    http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst38.htm
    http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/webservices/webservices16.htm
    Regards
    Sampath

  • Can the SPA112 phone adapter be used for an entry door station?

    I have a client with a large IP phone system and a number of analog door intercom modules that need to be integrated with it. Long story short, they need the analog door stations to be on the IP system so that when the doorbell rings the phones they can see which one was pressed.
    Currently we're using a Channel Vision controller that the incoming analog phone line passes through, the Channel Vision will ring the line into the IP gateway just like any other exterior call. The IP system, on the other hand, needs an extension to be dialed for a "page all" to be sent.
    So my questions are: Can the SPA112 get the analog intercom on the IP system? If so, can the SPA112 be configured to dial the proper extension when there's a "ring" on the analog side?

    Hi David
    Spa112 has 2 FXS port so your system should be able to simply go off hook on the line and with an appropriate dialplan configuration on SPA it could be work.
    Here you can find a configuration sample of SPA 112.
    HTH
    Regards
    Carlo

  • Is there any planned support for the "do not back up" extended attribute for iOS

    Starting in iOS 5.0.1, Apple has introduced a new "do not back up" extended file attribute that will allow an app to store downloaded data into the application folder.  Is there any planned support for setting this attribute within an AIR application or is there currently a way to set this attribute using the existing AIR SDK.

    Yes, this is exactly what I'm wondering too. Without it, we can't build any apps that download content without the risk of the content being deleted.
    Here's the background before Apple introduced the new "do not back up" attribute:
    http://www.marco.org/2011/10/13/ios5-caches-cleaning
    Fortunately, Apple addressed it after that blog post in 5.0.1. See bullet #4 here, quoted below
    https://developer.apple.com/icloud/documentation/data-storage/
    Q:  My app has a number of files that need to be stored on the device permanently for my app to function properly offline. However, those files do not contain user data and don't need to be backed up. How should I store those files in iOS 5?
    A: Starting in iOS 5.0.1 a new "do not back up" file attribute has been introduced allowing developers to clearly specify which files should be backed up, which files are local caches only and subject to purge, and which files should not be backed up but should also not be purged. In addition, setting this attribute on a folder will prevent the folder and all of its contents from being backed up.
    Important: The new "do not back up" attribute will only be used by iOS 5.0.1 or later. On iOS 5.0 and earlier, applications will need to store their data in <Application_Home>/Library/Caches to avoid having it backed up. Since this attribute is ignored on older systems, you will need to insure your app complies with the iOS Data Storage Guidelines on all versions of iOS that your application supports.
    Now we just need Adobe to support the attribute in the AIR SDK. What do you say Adobe?

  • Modifying the custom tables TBZ* generated by EEWB for BUPA?? Advisable?

    Hi,
    We have added new fields in BUPA using EEWB. The new fields are automatically added in the new section created on screen. Now our requirement is to move these fields to one of the existing sections and delete the new section. Is it advisable?
    I assume that in the EEWB extension wizard, we do not have any option of generating the new fields in existing custom sections. Please correct me if I am wrong.
    As per our current plan, To accomplish this change we are planning to modify the tables TBZ3H, TBZ3I, TBZ3C and TBZ3D for the view--> section --> screen mapping. Will that be enough or some more changes will be required?
    Also, a new BDT application is created for the new section and there are corresponding entries in TBZ0A, TBZ0B, TBZ0C and TBZ1F. Now we are not sure that if we modify/delete these entries, how the system would behave. Any pointers are welcome!!
    Specially for TBZ1F entries, should the new events function modules created for the new application be assigned to the already existing application.
    Please advise.

    http://scn.sap.com/people/rakesh.chugh/blog/2009/12/28/deletion-of-eewb-extensionproject-in-sap-crm-for-bupa
    Just in case you are looking for this info

  • Can the volume on ipads be increased slightly for the hard of hearing

    i find the ipads maximum volume slightly to low for my personal use i dont use it in public so i dont intend disturbing others but i would like to know if the volume on the i pad can be increased slightly for my personal enjoyment as at the moment i find it hard to hear films and music and i have no wish to use earphones as they cause me irritation the max setting on the ipad is just not quite enough

    May I suggest that you use a good pair of earbuds instead of earphones.
    Apply a very thin layer of almond oil for the skin to the earbuds before you insert them into your ears.

  • Can the new iPod nano get health kit for fitness tracking?

    In conjunction with the Nike app, I was wondering if the new iPod Nano could obtain HealthKit for fitness tracking? The iWatch is too small for me. Thanks.

    No the new one *****, we need the 6th generation to come back!

  • Generate XML file for payroll result

    Hi,
    I tried to generate XML file for chinese payroll result by t-code: pu12, but i can not find the interface format for china payroll(here is format for other country vesion like international, france...). How can i generate xml file for chinese payroll result. DO i need to create a format type? Is there any other way? thank you in advance.

    Coming back to my question is it really possible to generate bigger XML on 9i.
    Sure. But not in one go.
    I would use SQL/XML functions instead and paginate the result set so that each CLOB chunk doesn't exceed 4GB (or less). Each chunk could then be appended to a file using UTL_FILE.
    Alternatively, as Oracle 9i supports parallel pipelined functions, you could also imagine doing the job in parallel using automatic data partitioning on an input ref cursor.
    That would require some postprocessing steps to rebuild the entire file from the different chunks though.
    See : Pipelined and Parallel Table Functions

  • Adapter specific message attributes for SOAP adapter

    Hi all,
    I  have gone through the SAP Help Documents for configuring SOAP Communication Channel. I am unable to understand how to implement ASMA for Soap adapter.
    Please provide some links to help me understand the same
    Many Thanks,
    Neha

    Hi Neha,
    pls do chk the below links for SOAP adapter message attributes
    http://help.sap.com/saphelp_nwpi71/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/content.htm
    http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst38.htm
    http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/webservices/webservices16.htm
    Regards
    Sampath

Maybe you are looking for