Can the wireless printer work with window 7?

can the wireless printer work with window 7?

Will this wireless printer connect to the AirPort Express Base Station (AX) via a wireless or USB connection?

Similar Messages

Will the Linksys WRT160N work with windows vista at all?

Will the Linksys WRT160N work with windows vista at all?
Some one please clear this up for me, it could be answered in the simplestterms from the English Language of course.
I've recently purchased the Linksys WRT160N however after purchase "of course"I manage to find reviews stating that the router will not work with the WindowsVista Premium, or windows Vista for that matter.
E.g.(Comments like These 'which are not my own')----------
"When I tried it with a new computer running Vista 64, it would install but the Linksys System Advisor would not. After 1 chat and 4 phone calls with support the system will still not run."
"It is a good product with XP, but if you use Vista 64 good luck. After several hours of working to get it running my patience and options have run out."
"It has taken almost a week for us to figure out that the Linksys Router, WRT160N from Best Buy does not workwith Vista Premium. I looked on-line to Linksys Website and discovered that the router, WRT160N is notsupported for Vista users. .."
E.g. (CommentContradicting to what has been said above)------
"Bought this to replace my outdated Linksys (new Vista laptop) and was blown away. Thisthing practically set itself up. It replaced the wired router and wireless routers I was using, asthe signal strength is awesome. I'm still pulling over 5meg ... "
So I guess one could see why I am confused, based on the 2 sidedcontradictions pertaining to this router actually working with windows vista ornot.
So can someone respond (preferable a Vista User) and tell me the truth as of towhat this router can an cannot do in terms of Vista? Thanks

It should work with vista without any issues if you are running any software on the computers (64 bit) from linksys it may not work but if you will connect that computer with an ethernet to the router it should work fine.

Does the iPod Mini Work with Windows?

I am thinking of buying an iPod mini but I don't have an Apple computer. Does the iPod mini work with Windows efficiently? Thanks....

Hello Ian,
Can you be really specific about the necessary Windows XP updates needed? I run XP Pro on a rather new computer and just got an IPOD mini. I'm ready to tear my hair out because iTunes seems to crash my computer every time I change one CD for another. iTunes runs REALLY, REALLY slow for me. Also read on the board that iTunes 6.0 and the mini don't work well together. True or not true?
Thanks - Genevieve

S10-3t bluetooth and wireless not working with windows 8

S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

Do you still have your windows7 install files ?
( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
if yes I fear you have to enable it in win7 and then use it in win8
http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
OS:GNU/Linux/Debian

Will any wireless printer work with my iPad

will any wireless printer work with my iPad

http://www.apple.com/ipad/features/airprint.html
these will work with airprint
others might work with 3th party apps and apps from the
printer makers

Will a wireless printer work with airport extreme?

Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

Can the MacBook Air work with any other type of internet connection beside wifi?

Can the MacBook Air work with any other kind of internet connection besides Wifi?

Who? ITS VERY important when doing a restore, in fact you DO NOT want to do a wifi restore
The pros all have that Ethernet adapter,... that should tell you something. An Ethernet restore via that "thing" makes restoring the OSX about 8X faster.
Its called a Gigabit Ethernet adapter for a reason.
"who the heck" is anyone working with their Macbook Air at home and want a MUCH FASTER download / internet connection.
*Stockbrokers who pack their Macbook Air, arrive at work and plug that "hardwired" dongle to their Air........ because even seconds in the stock market can make the difference between losing a million $$, or making a million $$
So now you know WHY,.....before you didnt.

Can the xserve raid works with iOS 10.9

can the xserve raid works with iOS 10.9
The Raid System is from the year 2006!
and have 14 x 500 Gb hard drives
and the Server is from September 2009
Prozessor 2,26 GHz Quad-Core Intel Xeon
and ist working with iOS 10.9.3

Yes.

Can the iPod classic work with bluetooth

Can the iPod classic work with bluetooth devices

Yes, you do.For full details:http://www.apple.com/ipod/specs.html

Does hp 3056A printer work with windows 8

does an hp 3056A all-in-one printer work with a windows 8 computer

Hi,
Yes, you can use driver from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5298...
My suggestion: download the second utility and run it, it will find and install driver for your computer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP LJ4mv wireless printer worked with OS 10.5.5 but not with 10.6.3 - help!

My ancient HP worked with 10.4.11 and 10.5.1 thru 10.5.5 wirelessly. With 10.5.6 thru 10.5.8 installed, the printer did ot work and only the Adobe printer appeared in the Printer/Fax setup. With 10.5.5, I was experiencing random horizontal gray lines, polygons with gradient colors (cyan and magenta) flashing on and off and smeared dialog boxes and drop down menues. So, I upgraded to 10.5.8 and lost the artifacts and my wireless printer. All drivers are current (Software Update delivered/installed updated drivers today.)
10.6.3 is now installed and I still do not have a wireless printer. The Adobe PDF printer pops up and in the Printer/Fax dialog, it indicates "Kind" as HP LaserJet 4V/4MV Postscript. The Default button is active but all other buttons are grayed out and my printer does not appear.
Summary: the printer works, the wireless router works and the drivers are current.
Q. How can I get my wireless printer back? I need it badly.
Thanks.
Leonard

Kappy, thx.
The driver that is appearing now with the Adobe printer worked fantastically with 10.5.5, HP LaserJet 4V/4MV Postscript. This is from Apple, I believe. My printer does not show up when + is selected in the Print & Fax dialog and the Printer Name/Kind list appears. Only the Adobe is there.
I d'l'd/instld the Gutenprint. I cannot select it until the printer appears in the Printer Name/Kind field.
What is SL? :S
Greg, thx.
The printer is cat 5 to the ISP's wireless router and I am wireless. This has always worked up to 10.5.5. I incrementally d'l'd os upgrades 10.5.6, 10.5.7 and 10.5.8 and found the printer would not appear when I tried to add it. With Leopard, up to 10.5.5, my printer appeared automatically and I just had to make a selection from the "Print Using:" drop down.
Bruce, thx.
AppleTalk was a part of the setup and in 10.6, I cannot find AppleTalk. So you may be right about the IP route. Would Apple change this in the middle of Leopard with 10.5.6 (it worked up to 10.5.5) and not with 10.5.0 or 10.6.0? Would there not be an announcement that AppleTalk printer support was ending? No one in these forums knows that AppleTalk printer support was ended (I first posted in the Leopard forums)?
Sorry for the skepticism. I just did not think this was a possiblity but maybe you are right.
Is there a way to get an Apple reading on this? Should I set up a print server for wireless access? Any other suggestions?
Thanks again all. I much appreciate your help.
Leonard

Getting existing wireless solution working with Windows 7 client

A bit new to this so need some help
I have been asked to do some innovation around an existing operational wireless solution.
Setup is;
1. Wireless client - running Juniper Odyssey client. This authenticates user on logon to Windows using username / SecurID token / pin. Configuration via WAP / TKIP
2. Cisco Aironet Wireless Access Point
3. Cisco 4402 Wireless LAN controller
4. Cisco ACS v4.1 - configured as RADIUS server with connection to external RSA Authentication Manager 6.1
As part of a transformation programme I have been asked to investigate whether this existing wireless infrsatructure will work with Windows 7 as the client operating system. Also to look whether the wireless functions in Windows 7 will allow the Odyssey client to be removed.
I am unsure what client if any I need to install on the Windows 7 client in order to try and get this working. Do I need the VPN client from Cisco, the RSA EAP client or will Win 7 allow me to do this.
Any help appreciated.

I am still struggling with this concept of suplicants
I have tried to set this up with the wireless capabilities in Windows 7 to no avail. I see that Windows 7 only supports certin EAP types - how can I find out what my EAP type is on the ACS server?

Will the deskjet 1010 work with windows 10?

I'm going to upgrade to Windows 10, just checking to see if my Deskjet 1010 is going to go there with me. Currently running this on Windows 7. The Deskjet 1010 is perfect for the little bit of printing I do, I don't want to change printers if I don't have to.

Hi, Thank you for posting in the HP Support Forum. As mentioned here : Most applications and hardware drivers designed for Windows 7 or later should work with Windows 10 Windows 10 is not officially released yet. Unless officially released drivers, no official support is present. At the moment, no official guarantee can be provided. However, I am sure it will work properly. Windows 10 should recognise it automatically.

Does the Ipod Nano work with Windows XP SP1???

I studied the system requirements for the ipod nano and there was written, that I need a WinXP with SP2 for it.
Because I use Sound-Software that only works with Windows XP SP1 I have to keep this system, and I now would like to know if that works. Could anyone answer this question??

Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

Trouble with getting the wireless to work with HP Laserjet P1102w printer

Hi really struggling
I just bought the HP Laserjet P1102w as it was advised that it would run my apple products (Mac OS 10.6 Snow Leopard laptop and ipad).
I have mangaed to set up printer to work using the USB cable to the laptop. Success.
BUT i am finding it impossible to get it to work with wireless on any devices.
I get as far as network selection in set up and nothing is in the list (unlike USB which has the printer named) - so i click the 'create' button and input my network/SSID code , which is a BTHub. I assume this is correct? Or is it an address to be found elsewhere ? I have downloaded driver and software (update HP Firmware utility)
which I believe to be correct from the HP.com website for the operating sytem of the mac.
I have also followed a number of videos but often the process does not follow the video sequences.
I have tried to speak to PC Word 'know how team' who sold me the printer but they had no knowledge at all to help this situation. Any help would be much appreciated - this seems l ongoing problem for some other users.

Hi @bgriffiths60 ,
I understand that you are having issues setting up the printer over the wireless network. I would really like to be able to help you resolve this issue.
To check your network Encryption type, go to the Apple, System Preferences, Network, click the Advanced button/double click the network name. (shows WEP or WPA)
To check the network password follow these steps:
On the Apple menu bar, click Go, select Applications, Utilities, Keychain Access, double click the network name,
check the box to show the password, type in your Mac password to view it. (some networks have a shortcut password setup)
Make sure Safari is set as the default browser. Sometimes the Embedded Web Server won't open in other browsers.
Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Restore the printer defaults: Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IPv4 address are cleared.
HP LaserJet Pro P1102 and P1106/P1108 Printer Series - Printing a Configuration Page.
Go to the Apple, System Preferences, Print and Fax.
Double click on the P1102w.
Open the Utility.
Click Printer Setup.
Click HTML config.
This should open the Embedded Web Server for the printer.
Click the Networking tab.
Click Wireless from the list on the left.
Under Communication Mode , click Infrastructure.
Select your network SSID from the Available Network Names (SSID) list and then click the << button so the network name moves over to other box.
From the Security Mode pop-up menu under Authentication , click WEP, WPA/WPA2 or open . Your selection depends on which Wireless Security Protocol your network uses.
Make sure you select either hexadecimal or alpha depending on your password. (very important)
Apply the settings.
In the confirmation box (changes have been saved), click OK.
You should get a solid blue light on the printer shortly.
Then all we have to do is delete the USB driver and add the network driver.
Click on the Apple.
Click System Preferences.
Click the Print and Fax icon.
Highlight the printer and click on the - sign to delete the printer. (USB driver)
Disconnect the USB cable.
Then click the + sign and select the printer from the list and click add. (P1102w Bonjour)
Test the printer.
If you have any issues with the HTML config opening then do the following steps:
Close any applications.
On the Apple menu bar, click Go, Computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings.
Then delete the USB driver and add the network printer.
If there is anything else that I can help you with just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can the wireless printer work with window 7?

Similar Messages

Maybe you are looking for