Can there be more than one transport targets for a business system in sld

Hi All,
I have a question about transport targets in sld for sap xi 3.0 sp19.
We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
Please help .
Thanks,
Padmaja

Hello,
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
Regards,
Mark

Similar Messages

Page HTML Body Attribute - can there be more than one in this area?

In "Oracle Database Application Express Advanced Tutorials", Release 3.0, B32469-01 on page 10-10, in the section labeled "Create a Call to the disFormItems Function" in step 6........it reads:
//start citation
In the Page HTML Body Attribute, enter the following:
onload="disFormItems(); first_field();"
//stop citation
My questions are:
Can there be more than one "onload" statement?
If yes, how do you string them together?
Assume the second function I want to add is "disFormItems_local()"
Thank you,
Maggie

Okay, I have figured it out, I believe. So, I will provide my own answer in case someone else is looking for this type of situation in the future.
I edited the page definition by adding another function, disFormItems_local(), to the HTML Header Attribute.
Next, I edited the item's HTML Form Element Attributes to call the function, onchange="disFormItems_local()"
Then, I created a call to the disFormItems_local function in the page HTML Body Attribute, onload="disFormItems(); first_field(); disFormItems_local();"
Other stuff that you will need to know is to be found in Chapter 10 page 8, Enabling and Disabling Form Elements of the 3.0 Advanced Tutorials.

Can there be more than one port for the same logical system

Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo

Can there be more than one JVM Running on the same machine

Can there be more than one JVM Running on the same machine.

Even JVM's of different versions (or vendors) can run on the same box at the same time.

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

Can we maintain more than one shipping condition for a customer

Hi,
Can we maintain more than one shipping condition for a customer

Hi Raj,
Yes you can maintain the different shipping condition for one customer but for this that SOLD To Party should have different SHIP to Party also as we mainatin the shipping condition for Ship for the party. In other words you can maintain as many shipping condition equal to the number of ship to party.
Other way is if that customer is in different sales area then you can maintain the different shipping conditions for that customer in all the different sales area.
Hope I could make myself clear enough to help you.
Please reward if its useful.
Regards,
Abhi.

Can there be more than one initiator in a shared review?

We use Acrobat X Pro to do shared reviews of pdf documents. At times, the initiator will be out of the office when someone needs to take action on the document and it would make it more convenient if there was more than one person with access. Is it possible to assign two people as the "initiator" of the documents so that there will always be one available?

No, sorry.
If you're using email or own-server-hosted reviews there's nothing (technically) to stop another person signing on using the initiator's identity provided they know the password. If you're using Acrobat.com to host the reviews, and so the participants are using Adobe IDs, then in a legal sense you can't because the terms of use for an AdobeID do not allow shared access.

How can I create more than one printer queue for a printer

I would like to have more than one "default" setting for my printer. This is so I can use a 3rd party print utility (fingerprint) to print to a non-airprint printer from my ipad. The utility prints using the default configuration. I don't need to get fancy here. Just "draft B&W' , "normal", and "Color best quality". If I need something else, I can always email the document to my MacBook. The utility has something about a virtual printer, but all I could find about that is that it is used for PDF printing and maybe a workflow.
My technology level: Used to be a programmer, after a decade of retirement, I can't even program an applescript today.

Take a look at this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/

Can there be more than one datasource to an Infosource

Hi,
I am learning the SAP BW and this question could be very basic.
I know that there can be only one infosource assigned to a datasource for each source system, but can an infosource have more than one datasource from different source systems?

Yes, you can have multiple datasource assignments that belong to the same source system or different systems.
DATASOURCE can only have 1 INFOSOURCE
INFOSOURCE can have many DATASOURCES
Good luck!

Can I use more than one flash-drive for ready-boost on Satellite L650/0ed

Hi,
I have a toshiba Satellite L650/0ed, is it alright if i use more than one 8gb flash-drive for 'ready boost' - what is the maximum number of flash-drives use can dedicate to 'ready-boost'.
In addition, if i use a 16gb flash-drive, will this dedicate more memory to 'ready-boost'.
Why is the seagate 1tb 3.5 expansion drive not compatible for ready-boost.
Thank you,
-Brent907

Hi mate
Please check this Microsoft page which describes the ReadyBosst
http://windows.microsoft.com/en-US/windows7/products/features/readyboost
There you can find this statement:
+ReadyBoost works with most flash storage devices. In Windows 7, it can handle more flash memory and even multiple devices *up to eight* , for a maximum 256 gigabytes (GB) of additional memory.+
Hopefully this can be helpful!

Can I use more than one Apple ID for an Apple TV?

I wanted to use more than one Apple ID account on my Apple TV, is that possible?

Welcome to the Apple Community.
You can only use one ID for purchasing from the Apple TV, but you can stream content from multiple libraries even though they have different ID's

How can I create more than one different signatures for one account or for one address?

I want to vreate 2 jr more signatures for one account. For example, in different languages, with different text, etc.

Take a look at this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/

Can there Be More Than One I-Tunes Account on One Computer?

I don't know where to post this question and can't find it anywhere in the Faqs. If there are a couple of people using I-Tunes, can they use the same computer but with their own accounts? If so, how can they set up their own account? The reason I am asking is because a couple of family members have I-Tunes gift cards and will want to download their music and apps on a particular computer, the one that the I-pad will be syncing to. Thanks for any help on this.

can they use the same computer but with their own accounts?
Yes. Log in and out of the iTunes Store as needed, and authorize the computer with all of the accounts. The iPad can only contain content purchased from five different accounts at any given time.
(55674)

Can there be more than one apple id on a device?

We have 4 iPhones, 1 Macbook Pro, and 2 iPad Mini's. Currently my wife and I have separate Apple Id's which works great for our iPhones. However, our 2 children now have iPhones and iPad Mini's and I don't want to have to purchase the same Apps and music 2,3, or even 4 times so that everybody in the family can use them. I understand home sharing is designed to solve this problem however I am not clear as to how this works exactly. Obviously I don't want my children/wife to sync my info to their devices and vice versa.
So far we have two apple Id's [email protected] and WifeAppleId.mail.com. My children will need their own apple id's as well so that they can use iMessage on their phones and also to keep their stuff separate when syncing. Therefore I would create [email protected] and [email protected] Now everybody's iPhone will have their own apple id and sync independently of one another. Obviously each person would have their own account on the family Macbook Pro for syncing their devices with iTunes.
In order to share apps and music (at least knew apps/music) I now need to enable Home Sharing. This is the part I'm a bit confused about.
Do I create a fifth apple id say [email protected] and use this to configure home sharing on the Macbook Pro?
Do I configure Home Sharing for each user account on the family computer?
Now everybody will need to have two apple id's on each of their devices, for example MyAppleId and FamilyAppliId will need to be configured on my iPhone, WifeAppleId and FamilyAppleId will need to be configured on my wife's phone, SonAppleId and FamilyAppleId will need to be configured on my son's iPhone and iPad Mini, and the same for my daughter.
How do I associate two apple id's with each device? How do I sync a device with two apple id's?
I'm hoping someone can answer this question as clearly as possible

I will share with you what I have done to manage this with my family. While the solution isn't without flawes, it seems to do the trick. First, you need to have one person who is managing the synching of everyone's devices. In my family, I have three iphones, about to be four, and five ipads. We all synch to the same apple ID to allow one another to take seemless advantage of our Itunes, which is on our Imac. To synch individual music or video interests, we simply select which playlists we want and manually synch that way. A couple of us use imatch and the cloud to make the entire library accessable as well. With respect to the imessage, mail, contacts, etc. we each have a gmail account for our individual emails, contacts etc. So for instance, my forth grade daughter has a gmail account that we choose to synch her contacts, calendar, etc to and then that is also the account where she receives her imessages from on her ipad and itouch. My son, who has an iphone and ipad, does the same thing, but under settings, he goes to imessage and checks his phone number and his email as his preferred way to receive imessages and texts. My wife and I do the same thing. To avoid having everyone see one anothers contracts etc, we only synch contacts from our individual email accounts. Here is the downfall to this: When you update your phone or add a new device, apple always wants to reset everyone's facetime and imessage settings and then low and behold we are all receiving imessages from one another's friends etc. To work around this, I simply take each of their devices and go to their imessage settings and only check the email and phone numbers relative to their devices. I dont' know is this is the best solution, but it seems to work for us.

Can i use more than one email address for one account

I created one user account. I would like to create and use three separate email address for this one account, which will all show under one profile. Is that possible, and if so, is it free to do so? Thank you.

You can add more identities to a single profile.
Go to Tools -> Account Settings -> <your account> and click the Manage Identities button on the bottom right. That's the place where you can add additional e-mail addresses for your account.

Can there be more than one transport targets for a business system in sld

Similar Messages

Maybe you are looking for