Can use different sequence settings on the same project file ?

I have 2 camcorders now, one is a AVCHD and the other is HDV tape.
QUESTION 1:
As the former is 1920 x 1080 and HDV is 1440 x 1080, can I use all the clips of 1920 x 1080 in sequence 1 and all the clips of 1440 x 1080 in sequence 2 (both sequence 1 & sequence 2 are in the same .fcp project file) ?
QUESTION 2:
I often seen Tom saying the settings in Easy setup and be the same settings in the sequence settings.
If in Easy Setup, I select AVCHD PAL - 1920 x 1080i50, how do I select the same for sequence settings ?
Thanks

1. A qualified yes because I don't know what sequence 1 and 2 are.
2. The easy setup is your sequence setting. Make a new sequence and it will be in that format.
If you want to mix the media from those it cameras it would probably be better if you can switch the AVCHD camera to shoot 1440x1080; most can do that, and it would then match the media from the HDV camera.

Similar Messages

  • Can two different account work on the same project?

    I work for a non-profit organization and we are think about switching platform for our website, we are looking in to Muse, our graphic designer already have a Adobe Muse account and we would like to get an other account for the organization, will it be possible for both our account to work on the same project? With an account we can only have two computer with Muse and there will be 3 working on the website.

    Hi Alexandre,
    At any given point not more than one person can work on a .muse file. Muse is not yet designed for a workflow like this. You can update the .muse file using three different accounts as long as the file is not opened at more than one end at the same time and the file needs to be shared manually in between the accounts once one person is done working on it.
    - Abhishek Maurya

  • Is it possible to use different iOS devices with the same account of the gamecenter?

    Is it possible to use different iOS devices with the same account of the gamecenter? in that case, can two people play a game with the same account and add both scores to the same leaderboard nickname?

    You should be able to use the same account. The top scores will get updated on the leader board.
    Taz

  • How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?

    How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?

    mpcsouza wrote:
    How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?
    you can't, GB is restricted to a single time signature per project
    however, the time sig is really more cosmetic, it doesn't affect the way the project plays back, so you could set the project to 2/4 when working on the 2/4 parts, and 3/4 when working on the 3/4 parts

  • How to duplicate a sequence in Premiere Pro CS3 within the same project file ?

    Hi there,
    How do I duplicate a sequence in Premiere Pro CS3 within the same project file ?
    Thanks

    If you are new to Premiere CC start here:
    https://helpx.adobe.com/creative-cloud/learn/tutorials/premiere.html#get-started

  • Using different iCloud accounts with the same apple iD

    My mom, brother, and I all use the same apple ID so we can all buy songs off of the same credit card. I have my iPhone and I also just got a Mac. My brother has his iPhone and an iPad and my mom just has her phone. We all listen to different music. Is there a way that I can set up an iCloud account for my phone and Mac so that I just have MY music, not my brother's and mom's? If so, how? I would like to be able to download a song on my phone and have it appear on my iTunes on my Mac.

    The iCloud account is not what you are using to purchase and download music. That is for your backup and other things. The Apple ID that you are sharing is for music. If you want your own music, then you need to set up your own Apple ID account and sign into that in the iTunes store.

  • Using different Apple IDs, but the same for Find My Phone

    In my family, we have 4 iPhones and an iPad. I want to allow each member of the family to have a separate Apple ID for iCloud. But I want to be able to find all the phones from the iPad. I understand that, to do that, you need to use the same Apple ID for "Find my Phone". But after researching it, it appears that Find my Phone requires you log in to iCloud. I know you can use a common Apple ID for Apple Store, but how do I do this for Find my Phone? I want each family member to have their own iCloud account.
    Thanks in advance.

    I have read a little about that, but I need it to actually send a signal to the phone like how "Find my Phone" does it.
    I have 2 kids, they are constantly misplacing their phones in the house. It comes in handy to send it a signal to make a noise, especially since they always leave the phone on vibrate, so calling it doesn't work. Right now everyone uses my Apple ID, so it works great. But I would like it if each of them would get their own Apple ID.
    So let me ask this: When they set up their new phone, can the use a different (their own) Apple id to set up the phone. Not setup iCloud to start. Then go back later and setup iCloud but specify "my" Apple ID (like they must be doing today). And then enable "Find my Phone".
    What does it buy them to use their own Apple ID when setting up a new device? Does it matter? The reason we use the same ID now is so everyone can get the same apps when I buy them. If iCloud and Find my Phone could use separate ID, this wouldn't be an issue.
    Thanks for the suggestion!
    UPDATE: Let me just add, we never backup to iCloud, we always use iTunes on our Macs.

  • Can 2 different apple ids specify the same bank account as iOS developers?

    Hi,
    There are 2 different iOS developer accounts. Is it possible for them to specify the same bank account credentials to transfer money from Apple?

    Thanks. Actually I meant organization bank account. Money transer will be made to retrieve payments for the apps sold in the app store. Does this affect the answer?

  • Can two different adobe accounts sync the same files?

    I'm trying to figure out how to my client and I can use the InCopy/InDesign workflow using the adobe cloud storage. I get how the client can download the .indd files and open them in InCopy to edit, and upload it back to the cloud storage - but my question is - will that edited .indd file then sync to my hard drive copy of the file? Please confirm.

    Yes you can do this using the file sync that is part of the Creative Cloud desktop application and the Collaborate option that is part of the Creative Cloud Files page at https://creative.adobe.com/files.
    The file sync is on by default and creates a Creative Cloud Files folder in your user directory. Place a folder (not file) that you want to collaborate on in this folder (you can also create the folder from https://creative.adobe.com/files). Place the InDesign and InCopy files into this folder. From the Creative Cloud Files page select the Collaborate option. Alternatively from the Creative Cloud Files folder you can select the context menu for the folder of Creative Cloud > Collaborate which then launches your default browser and takes you to the option.
    Help document:
    Creative Cloud Help | Collaborate by sharing folders

  • Can 2 different computer accounts share the same Itunes library?

    Does anyone know: Is it possible for two users on the same computer to "SHARE" the same iTunes Library so you don't have to duplicate libraries on the hard disk?
    So far I have been having to load 25GB of Music on my wife's account and the same 25GB itunes library on my account.
    I have put the single iTunes files in the "PUBLIC" music folder and set that as the default on the ITUNES "Preferences" but still does not work for some reason.
    Thanks

    Yes sir, did that but it still has the same problem.
    Now when I go to my wife's account (everything identical , playlists, etc. in both accounts) it does not know where to locate the songs. I place it in the default and it works, but as soon as I go back to the other persons account, the default has automatically changed back, and none of the playlists (although still intact) have again lost the location of the actual music (located on in the Public Music folder) very frustrating.
    It would seem to be simple.

  • How can I produce two outputs of the same project

    Dear Sir,
    My aim is to produce two outputs of the same master project,
    HTML help and Webhelp each one will be used differently in my
    compnay.
    Producing two outputs is fine but the problem was that
    external links are done differently for HTML help and Webhelp and
    as I Knew from you that this can be solved using conditional tags.
    Actually I am new to conditional tags and I don't know how to
    use them. Could you please help me to do this or recommend a link
    on how to use condtional tags to produce different outputs.
    Thank you very very much

    Hi there ahlam323
    See if the link below helps any. Some goober wrote something
    on it.
    Click
    here to read the goober's guide
    Cheers... Rick

  • URGENT: XML-SQL: Error parsing different date formats in the same XML file.

    Hi Everyone,
    I have a big problem while using the XML-SQL utility. I have a XML file with different date formats. I get exception like the one below.
    "oracle.xml.sql.OracleXMLSQLException: 'java.text.ParseException: Unparseable date:"
    And the XML file is :
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <Info Key="ID">
         <Insert>
              <ID>1</ID>
              <BookingDate>10.12.2001</BookingDate>
              <OpeningTime>19:16</OpeningTime>
         </Insert>
    </Info>
    I have tried using different setDateFormat which is contrary.
    sav.setDateFormat("d.M.y");
    sav.setDateFormat("H:m:s");
    Can someone help me on the same.
    Thanks in advance.
    Subramanian.

    You might have to describe the columns as varchar then modify the table to the right format.

  • Can keyboardEvent and mouseEvent work in the same .swf file?

    I'm nowhere near an expert on Flash or action script, so this is probably a simple thing to solve. But so far I haven't figured it out.
    I put together a rather simple interactive .swf file using graphical "buttons" to navigate through different screens. Afterwards, I was told to add in two keyboard events as well: one to navigate to the next screen and one to restart the .swf file.
    Using the keyboard to navigate the way I explained above works fine--that is, until I use the mouse to click on a button. Once I do that, the keyboard events no longer work. For example, if I start off the .swf file by pressing the Space bar on the keyboard to navigate to another page, it works fine. If I then press the "R" key on the keyboard to restart the .swf file, that works fine as well.
    However, the first time I click on one of the buttons on the stage to navigate to another screen, the keyboard events no longer work. I can press the Space bar, and nothing. I can press the "R" key to restart the .swf file, and nothing. It's as if using a mouse event disabled the keyboard events or made the .swf file stop "listening" for keyboard events. The only way I can get the keyboard events to work again is by clicking somewhere on the stage and THEN pressing the appropriate keyboard key. I'm guessing that's because I put the focus back on the stage, maybe?? (again, not an expert here)
    My code is ridiculously simple, and it's on the first frame:
    stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey);
    function onKey(event:KeyboardEvent):void
        if (event.keyCode == Keyboard.SPACE)
            gotoAndPlay(currentFrame + 1);
         if (event.keyCode == 82)
            gotoAndPlay(1);
    Is there anything I need to do to this to make sure the .swf file is always "listening" and registering the keyboard events?
    Thanks..

    use:
    trace("defined");
    stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey);
    function onKey(event:KeyboardEvent):void
    trace(event);
        if (event.keyCode == Keyboard.SPACE)
            gotoAndPlay(currentFrame + 1);
         if (event.keyCode == 82)
            gotoAndPlay(1);
    test by clicking one of your buttons and watching the output panel for "defined".  if you don't see that, you're not defining a keyboard listener when that button is clicked.  if you do see it, then click a keyboard key.  (if you're testing in the flash test environment make sure you disable keyboard shortcuts.)   if you fail to see the keyboardevent trace, you're removing or disabling your listener after it's defined.

  • How to use different font styles in the same boolean text?

    Hi all,
    As reported here http://digital.ni.com/public.nsf/allkb/6BD344ACA4DEE20A8625692700737E16, it is possible to change font color, size or other font properties of a subtext in a string indicator. This can be applied to a caption too.
    I'd like to apply this properties to a boolean text but it does not work. The boolean control has the Text.selectionStart and End property node but it does not appear to function.
    Can you help me?
    Thanks all

    This is a bug in the development environment (I think it showed up around LV8).
    There's a workaround, but it seems to work intermittently: Place some floating text on your front panel, then edit it's font styles.  Select and copy the floating text.  Select the boolean text (double click on it).  Paste.

  • Can we have two textures for the same project ?

    Hello all
    I use Captivate4. In my project, the background transparency for Playbar controls is 100%. So the texture would be seen as the background for the PlayBar. I have a requirement of hiding PlayBack Controls in few slides. Then I would like to change my texture to some other image. in brief, I would like to show one texture when the PlayBar is visible & another texture when the PlayBar is invisible.
    Is that possible?
    Thanks & regards,
    Kartik.

    OK.  This would be a little easier to do in Captivate 5 which has Master Slides and Playbar Overlay. But since you have Captivate 4 you will need to make do with adding graphics to the background of the actual slide, and just turning off the Playbar.
    From the graphics you added to your last post, it looks like you already know what you want the background to look like. You want a different background for Slide A and Slide B.  One way to do this is to add the graphic to each slide, then right-click and select Merge with Background.  But you can also just put the image on the lowest layer on the timeline of each slide and the effect would be similar.
    Regarding the Playbar...Since you are on Captivate 4, you do not have the option to set Playbar to Overlay.  I've just looked in Captivate 4 but the option is missing.  Here is what the Skin Editor looks like in Captivate 4 and 5.  Notice the Playbar Overlay setting is missing in Cp4.  There may be another way to do this but I don't know.
    This playbar overlay option would have allowed you to set the position of the playbar as sitting over the bottom 30 pixels or so of the stage area.  Since you can't do this, you may need to be satisfied with seeing the area occupied by the playbar go blank when it is hidden.
    To hide your playbar on Slide B, you will need to add an Advanced Action on Slide Enter that turns off the playbar by assigning the variable cpCmndShowPlaybar to 0.  Here is what that looks like in the Slide Properties dialog for your Slide B.

Maybe you are looking for